Vladimir implemented the MAC merge support and reviews all
the new driver implementations.
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250215225200.2652212-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Could be just me, but I had to pause and double check that the Tx csum
counter in qstat should include GSO'd packets. GSO pretty much implies
csum so one could possibly interpret the csum counter as pure csum offload.
But the counters are based on virtio:
[tx_needs_csum]
The number of packets which require checksum calculation by the device.
[rx_needs_csum]
The number of packets with VIRTIO_NET_HDR_F_NEEDS_CSUM.
and VIRTIO_NET_HDR_F_NEEDS_CSUM gets set on GSO packets virtio sends.
Clarify this in the spec to avoid any confusion.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250214224601.2271201-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Damato says:
====================
netdev-genl: Add an xsk attribute to queues
This is an attempt to followup on something Jakub asked me about [1],
adding an xsk attribute to queues and more clearly documenting which
queues are linked to NAPIs...
After the RFC [2], Jakub suggested creating an empty nest for queues
which have a pool, so I've adjusted this version to work that way.
The nest can be extended in the future to express attributes about XSK
as needed. Queues which are not used for AF_XDP do not have the xsk
attribute present.
I've run the included test on:
- my mlx5 machine (via NETIF=)
- without setting NETIF
And the test seems to pass in both cases.
[1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/
[2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/
====================
Link: https://patch.msgid.link/20250214211255.14194-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that queues which are used for AF_XDP have the xsk nest attribute.
The attribute is currently empty, but its existence means the AF_XDP is
being used for the queue. Enable CONFIG_XDP_SOCKETS for
selftests/drivers/net tests, as well.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Creating empty nests is helpful when the exact attributes to be exposed
in the future are not known. Encapsulate the logic in a helper.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce tests to verify the correct functionality of the SO_RCVMARK and
SO_RCVPRIORITY socket options.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250214205828.48503-1-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 6597e8d358 ("netdev-genl: Elide napi_id when not present"),
napi_id_valid function was added. Use the helper to refactor open-coded
checks in the source.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Stefano Jordhani <sjordhani@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk> # for iouring
Link: https://patch.msgid.link/20250214181801.931-1-sjordhani@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for changing the transmit amplitude voltage in 100BASE-TX mode.
Modifying it can be necessary to compensate losses on the PCB and
connector, so the voltages measured on the RJ45 pins are conforming.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-3-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add helper which returns the tx amplitude gain defined in device tree.
Modifying it can be necessary to compensate losses on the PCB and
connector, so the voltages measured on the RJ45 pins are conforming.
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-2-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add property tx-amplitude-100base-tx-percent in the device tree bindings
for configuring the tx amplitude of 100BASE-TX PHYs. Modifying it can be
necessary to compensate losses on the PCB and connector, so the voltages
measured on the RJ45 pins are conforming.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-1-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to device_release() in /drivers/base/core.c,
a device without a release function is a broken device
and must be fixed.
The current code directly frees the device after calling device_add()
without waiting for other kernel parts to release their references.
Thus, a reference could still be held to a struct device,
e.g., by sysfs, leading to potential use-after-free
issues if a proper release function is not set.
Fixes: 8c81ba2034 ("net/smc: De-tangle ism and smc device initialization")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214120137.563409-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a grammatical error in a test log message
in reuseaddr_ports_exhausted.c for better clarity.
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250213152612.4434-1-pranav.tyagi03@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5: Add sensor name in temperature message
This small series from Shahar adds the sensors names to the temperature
event messages, in addition to the existing bitmap indicators.
This improves human readability.
Series starts with simple refactoring and modifications. The top patch
adds the sensors names.
====================
Link: https://patch.msgid.link/20250213094641.226501-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, a temperature event message included a bitmap indicating
which sensors detect high temperatures.
To enhance clarity, we modify the message format to explicitly list
the names of the overheating sensors, alongside the sensors bitmap.
If HWMON is not configured, the event message remains unchanged.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250213094641.226501-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the sensor_count field of the MTEWE register, bits 1-62 are
supported only for unmanaged switches, not for NICs, and bit 63
is reserved for internal use.
To prevent confusing output that may include set bits that are
not relevant to NIC sensors, we update the bitmask to retain only
the first bit, which corresponds to the sensor ASIC.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepend '0x' to the sensor bitmap in the warning message to clearly
indicate that the bitmap is in hexadecimal format.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wrap the high temperature warning in a temperature event with
a call to net_ratelimit() to prevent flooding the kernel log
with repeated warning messages when temperature exceeds the
threshold multiple times within a short duration.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move some macros to phy-lib because MediaTek's 2.5G built-in
ethernet PHY will also use them.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-6-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to __mtk_tr_set_bits() support. Previously in mtk-ge-soc.c,
we clear some register bits via token ring, which were also implemented
in three __phy_write(). Now we can do the same thing via
__mtk_tr_clr_bits() helper.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-5-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously in mtk-ge-soc.c, we set some register bits via token
ring, which were implemented in three __phy_write().
Now we can do the same thing via __mtk_tr_set_bits() helper.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-4-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds TR(token ring) manipulations and adds correct
macro names for those magic numbers. TR is a way to access
proprietary registers on page 52b5. Use these helper functions
so we can see which fields we're going to modify/set/clear.
TR functions with __* prefix mean that the operations inside
aren't wrapped by page select/restore functions.
This patch doesn't really change registers' settings but just
enhances readability and maintainability.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-3-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace magic number with more meaningful macros in mtk-ge.c.
Also, move some common macros into mtk-phy-lib.c.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213080553.921434-2-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Place register number definitions immediately above their field
definitions and order by register number.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1tjblS-00448F-8v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hook up the display fault irq handlers for VLV/CHV.
Unfortunately the actual hardware doesn't agree with the
spec on how DPINVGTT should behave. The docs claim that
the status bits can be cleared by writing '1' to them,
but in reality there doesn't seem to be any way to clear
them. So we must disable and ignore any fault we've already
seen in the past. The entire register does reset when
the display power well goes down, so we can just always
re-enable all the bits in irq postinstall without having
to track the state beyond that.
v2: Use intel_display instead of dev_priv
Move xe gen2_error_{init,reset}() out
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-9-ville.syrjala@linux.intel.com
Make life a bit more straightforward by removing the bitwise
not from {i9xx,i965}_error_mask() and instead do it when feeding
the value to gen2_error_init(). Make life a bit easier I think.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-8-ville.syrjala@linux.intel.com
Introduce i915_error_regs as the EIR/EMR counterpart
to the IIR/IMR/IER i915_irq_regs, and update the irq
reset/postingstall to utilize them accordingly.
v2: Include xe compat versions
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-7-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Decode the display faults a bit more extensively so that one
doesn't have to translate the bitmask to planes/etc. manually.
Also for plane faults we can read out a bit of state from the
relevant plane(s) and dump that out.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-4-ville.syrjala@linux.intel.com
I want to capture a little bit more information about the state
of the plane upon faults. To that end introduce a small plane error
state struct and provide per-plane vfuncs to read it out.
For now we just stick the CTL, SURF, and SURFLIVE (if available)
registers contents in there.
v2: Use struct intel_display instead of dev_priv
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-3-ville.syrjala@linux.intel.com
The if ladder in gen8_de_pipe_fault_mask() was missing one
else, add it. Doesn't actually matter since each if branch
just returns directly. But the code is less confusing when
you always do things the same way.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-2-ville.syrjala@linux.intel.com
The jcore-aic irqchip does not have separate interrupt numbers reserved for
cpu-local vs global interrupts. Therefore the device drivers need to
request the given interrupt as per CPU interrupt.
69a9dcbd2d ("clocksource/drivers/jcore: Use request_percpu_irq()")
converted the clocksource driver over to request_percpu_irq(), but failed
to do add all the required changes, resulting in a failure to register PIT
interrupts.
Fix this by:
1) Explicitly mark the interrupt via irq_set_percpu_devid() in
jcore_pit_init().
2) Enable and disable the per CPU interrupt in the CPU hotplug callbacks.
3) Pass the correct per-cpu cookie to the irq handler by using
handle_percpu_devid_irq() instead of handle_percpu_irq() in
handle_jcore_irq().
[ tglx: Massage change log ]
Fixes: 69a9dcbd2d ("clocksource/drivers/jcore: Use request_percpu_irq()")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/all/20250216175545.35079-3-contact@artur-rojek.eu
Christoph reports that their rk3399 system dies since commit 773c05f417
("irqchip/gic-v3: Work around insecure GIC integrations").
It appears that some rk3399 have secure payloads, and that the firmware
sets SCR_EL3.FIQ==1. Obivously, disabling security in that configuration
leads to even more problems.
Revisit the workaround by:
- making it rk3399 specific
- checking whether Group-0 is available, which is a good proxy
for SCR_EL3.FIQ being 0
- either apply the workaround if Group-0 is available, or disable
pseudo-NMIs if not
Note that this doesn't mean that the secure side is able to receive
interrupts, as all interrupts are made non-secure anyway.
Clearly, nobody ever tested secure interrupts on this platform.
Fixes: 773c05f417 ("irqchip/gic-v3: Work around insecure GIC integrations")
Reported-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250215185241.3768218-1-maz@kernel.org
Closes: https://lore.kernel.org/r/b1266652fb64857246e8babdf268d0df8f0c36d9.camel@googlemail.com
This reverts commit e3a606f2c5 because it
allows people to create broken configurations that enable FS_VERITY but
not SHA-256 support.
The commit did allow people to disable the generic SHA-256
implementation when it's not needed. But that at best allowed saving a
bit of code. In the real world people are unlikely to intentionally and
correctly make such a tweak anyway, as they tend to just be confused by
what all the different crypto kconfig options mean.
Of course we really need the crypto API to enable the correct
implementations automatically, but that's for a later fix.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20250217185105.26751-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
This mostly reverts commit a0fc20333e.
Keep the relevant parts of the comment added by that commit.
The problem with that commit is that it allowed people to create broken
configurations that enabled FS_ENCRYPTION but not the mandatory
algorithms. An example of this can be found here:
https://lore.kernel.org/r/1207325.1737387826@warthog.procyon.org.uk/
The commit did allow people to disable specific generic algorithm
implementations that aren't needed. But that at best allowed saving a
bit of code. In the real world people are unlikely to intentionally and
correctly make such a tweak anyway, as they tend to just be confused by
what all the different crypto kconfig options mean.
Of course we really need the crypto API to enable the correct
implementations automatically, but that's for a later fix.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20250217185314.27345-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Generate CPER record when bad page threshold exceed and
commit to CPER ring.
v2: return -ENOMEM instead of false
v2: check return value of fill section function
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit the CPER entry to the ring buffer.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid the confliction between read and write of ring buffer.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since pmfw supports for smuv13_0_6 is limited to 8 jpeg rings per instance,
which is the max for jpeg_v_4_0_3. Limit it to same to avoid out
of bound access.
Fixes: 568199a5c7 ("drm/amd/pm: Limit to 8 jpeg rings per instance")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Old CPER data will be overwritten if ring buffer is full, and read
pointer always points to CPER header.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We read CPER data from read pointer to write pointer without changing
the pointers.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And initialize it, this is a pure software ring to store RAS CPER data.
v2: change ring size to 0x100000
v2: update the initialization of count_dw of cper ring, it's dword
variable
v3: skip VM inv eng for cper
v3: init/fini when aca enabled
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get system local time and encode it to timestamp for CPER.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate the buffer at sw init time so we don't alloc
and free it for every suspend/resume or reset cycle.
Reviewed-by: Shaoyun.liu <shaouyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>