Make xpcs_config_eee() private to the XPCS driver, called only from
the phylink pcs_disable_eee() and pcs_enable_eee() methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQT-003w7O-Ec@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the explicit calls to xpcs_config_eee() from the stmmac driver,
preferring instead for phylink to manage the EEE configuration at the
PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQO-003w7I-Ap@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert XPCS to use the new pcs_disable_eee() and pcs_enable_eee()
methods. Since stmmac is the only user of xpcs_config_eee(), we can
make this a no-op along with this change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQJ-003w7C-6v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arrange for stmmac to call the new xpcs_config_eee_mult_fact() function
to configure the EEE clock multiplying factor. This will allow the
removal of the xpcs_config_eee() calls in the next patch.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQE-003w76-3C@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a function to separate out the EEE clock multiplying factor. This
will be called by the stmmac driver to configure this value.
It would have been better had the driver used the CLK API to retrieve
this clock, get its rate and calculate the appropriate multiplier, but
that door has closed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ8-003w70-VT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are hooks in the stmmac driver into XPCS to control the EEE
settings when LPI is configured at the MAC. This bypasses the layering.
To allow this to be removed from the stmmac driver, add two new
methods for PCS to inform them when the LPI/EEE enablement state
changes at the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ3-003w6u-RH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
inet: better inet_sock_set_state() for passive flows
Small series to make inet_sock_set_state() more interesting for
LISTEN -> TCP_SYN_RECV changes : The 4-tuple parts are now correct.
First patch is a cleanup.
====================
Link: https://patch.msgid.link/20250212131328.1514243-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current inet_sock_set_state trace from inet_csk_clone_lock() is missing
many details :
... sock:inet_sock_set_state: family=AF_INET6 protocol=IPPROTO_TCP \
sport=4901 dport=0 \
saddr=127.0.0.6 daddr=0.0.0.0 \
saddrv6=:: daddrv6=:: \
oldstate=TCP_LISTEN newstate=TCP_SYN_RECV
Only the sport gives the listener port, no other parts of the n-tuple are correct.
In this patch, I initialize relevant fields of the new socket before
calling inet_sk_set_state(newsk, TCP_SYN_RECV).
We now have a trace including all the source/destination bits.
... sock:inet_sock_set_state: family=AF_INET6 protocol=IPPROTO_TCP \
sport=4901 dport=47648 \
saddr=127.0.0.6 daddr=127.0.0.6 \
saddrv6=2002:a05:6830:1f85:: daddrv6=2001:4860:f803:65::3 \
oldstate=TCP_LISTEN newstate=TCP_SYN_RECV
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250212131328.1514243-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return early from inet_csk_clone_lock() if the socket
allocation failed, to reduce the indentation level.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250212131328.1514243-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is
constantly being filled with errors related to a "sequence number glitch",
e.g.:
[ 1903.284538] sequence number glitch prev=16 curr=0
[ 1913.812205] sequence number glitch prev=50 curr=0
[ 1923.698219] sequence number glitch prev=142 curr=0
[ 2029.248276] sequence number glitch prev=1555 curr=0
[ 2046.333059] sequence number glitch prev=70 curr=0
[ 2076.520067] sequence number glitch prev=272 curr=0
[ 2158.704202] sequence number glitch prev=2655 curr=0
[ 2218.530776] sequence number glitch prev=2349 curr=0
[ 2225.579092] sequence number glitch prev=6 curr=0
Internet connectivity is working fine, so this error seems harmless. It
looks like modem does not preserve the sequence number when entering low
power state; the amount of errors depends on how actively the modem is
being used.
A similar issue has also been seen on USB-based MBIM modems [1]. However,
in cdc_ncm.c the "sequence number glitch" message is a debug message
instead of an error. Apply the same to the mhi_wwan_mbim.c driver to
silence these errors when using the modem.
[1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.html
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-503735977cbd@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor clock management in EQoS driver for code reuse and to avoid
redundancy. This way, only minimal changes are required when a new platform
is added.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Swathi K S <swathi.ks@samsung.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250213041559.106111-1-swathi.ks@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For GSO packets, skb_cow_head() will reallocate the skb for TSO header
cloned skbs in airoha_dev_xmit(). For this reason, sinfo pointer can be
no more valid. Fix the issue relying on skb_shinfo() macro directly in
airoha_dev_xmit().
The problem exists since
commit 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
but it is not a user visible, since we can't currently enable TSO
for DSA user ports since we are missing to initialize net_device
vlan_features field.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250213-airoha-en7581-flowtable-offload-v4-1-b69ca16d74db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use EXPORT_IPV6_MOD[_GPL]() for symbols that don't need
to be exported unless CONFIG_IPV6=m
udp_table is no longer used from any modules, and does not
need to be exported anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use EXPORT_IPV6_MOD[_GPL]() for symbols that don't need
to be exported unless CONFIG_IPV6=m
tcp_hashinfo and tcp_openreq_init_rwin() are no longer
used from any module anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use EXPORT_IPV6_MOD[_GPL]() for symbols that do not need to
to be exported unless CONFIG_IPV6=m
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have many EXPORT_SYMBOL(x) in networking tree because IPv6
can be built as a module.
CONFIG_IPV6=y is becoming the norm.
Define a EXPORT_IPV6_MOD(x) which only exports x
for modular IPv6.
Same principle applies to EXPORT_IPV6_MOD_GPL()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250212132418.1524422-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The goal is for me to get a kernel.org account and then send pull requests
in order to relieve some pressure from Palmer and make our workflow
smoother.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Enthusiastically-Supported-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241212131134.288819-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The init_rt_signal_env() funciton is called before the alternative patch
is applied, so using the alternative-related API to check the availability
of an extension within this function doesn't have the intended effect.
This patch reorders the init_rt_signal_env() and apply_boot_alternatives()
to get the correct signal_minsigstksz.
Fixes: e92f469b07 ("riscv: signal: Report signal frame size to userspace via auxv")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-3-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The signal context of certain RISC-V extensions will be appended after
struct __riscv_extra_ext_header, which already includes an empty context
header. Therefore, there is no need to preserve a separate hdr for the
END of signal context.
Fixes: 8ee0b41898 ("riscv: signal: Add sigcontext save/restore for vector")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <AndybnAC@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-2-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes: 171586a6ab ("selftests/rseq: riscv: Template memory ordering and percpu access mode")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250114170721.3613280-1-shorne@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Make sure the compare value in the lr/sc loop is sign extended to match
what lr.w does. Fortunately, due to the compiler keeping the register
contents sign extended anyway the lack of the explicit extension didn't
result in wrong code so far, but this cannot be relied upon.
Fixes: b90edb3301 ("RISC-V: Add futex support.")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/mvmfrkv2vhz.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sign extend also an unsigned compare value to match what lr.w is doing.
Otherwise try_cmpxchg may spuriously return true when used on a u32 value
that has the sign bit set, as it happens often in inode_set_ctime_current.
Do this in three conversion steps. The first conversion to long is needed
to avoid a -Wpointer-to-int-cast warning when arch_cmpxchg is used with a
pointer type. Then convert to int and back to long to always sign extend
the 32-bit value to 64-bit.
Fixes: 6c58f25e69 ("riscv/atomic: Fix sign extension for RV64I")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Xi Ruoyao <xry111@xry111.site>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/mvmed0k4prh.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Comparison of bitmaps should be done using bitmap_equal(), not memcmp(),
use the former one to compare isa bitmaps.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Fixes: 625034abd5 ("riscv: add ISA extensions validation callback")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250210155615.1545738-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Link: https://lore.kernel.org/r/20241104190314.270095-1-robh@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It's recently changed to allocate dynamically but misses to update some
arch-dependent codes to use perf_sample__user_regs().
Fixes: dc6d2bc2d8 ("perf sample: Make user_regs and intr_regs optional")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250214191641.756664-1-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Not registering hwmon because it's not available (SRIOV_VF and DGFX) is
different from failing the initialization. Handle the errors
appropriately.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-13-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Now that previous callers in xe_device_probe() are handling the errors,
that can be done for xe_pmu_register() as well.
Cc: Riana Tauro <riana.tauro@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-12-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This is not really display-related and needed for any sequence on driver
removal that has to interact with drm_dev_enter()/drm_dev_exit().
Just remove xe_device_remove_display() and inline it in the single
caller to make clear this is not done only for display.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-10-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Like done with other functions, cleanup the error handling in
xe_device_probe() by moving the OA fini to be handled by xe_oa
itself, which relies on devm to call the cleanup function.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-9-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Now that xe_gt_remove is handled entirely by xe_gt, it's clear there are
some extra calls to xe_hw_fence_irq_finish() that aren't necessary.
Neither all_fw_domain_init() or gt_fw_domain_init() need to do that
since it's handled by the caller on any error.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-8-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The only thing in xe_gt_remove() that really needs to happen on the
device remove callback is the xe_uc_remove(). That's because of the
following call chain:
xe_gt_remove()
xe_uc_remove()
xe_gsc_remove()
xe_gsc_proxy_remove()
Move xe_gsc_proxy_remove() to be handled as a xe_device_remove_action,
so it's recorded when it should run during device removal. The rest can
be handled normally by devm infra.
Besides removing the deep call chain above, xe_device_probe() doesn't
have to unwind the gt loop and it's also more in line with the
xe_device_probe() style.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-7-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Not being able to initialize pxp is fatal if the platform is expected to
have it. Update comment after commit 9c9dc9ba4a ("drm/xe/pxp: Fail the
load if PXP fails to initialize").
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-6-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Make sure to differentiate normal behavior, e.g. there's no stolen, from
allocation errors or failure to initialize lower layers.
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Propagate the error to the caller so initialization properly stops if
sysfs creation fails.
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When devm_add_action_or_reset() fails, it already calls the function
passed as parameter and that function is already free'ing the irqs.
Drop the goto and just return.
The caller, xe_device_probe(), should also do the same thing instead of
wrongly doing `goto err` and calling the unrelated xe_display_fini()
function.
Fixes: 14d25d8d68 ("drm/xe: change old msi irq api to a new one")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
xe_display_fini() undoes things from xe_display_init() (technically from
intel_display_driver_probe()). Those `goto err` in xe_device_probe()
were wrong and being accumulated over time.
Commit 65e366ace5 ("drm/xe/display: Use a single early init call for
display") made it easier to fix now that we don't have xe_display_* init
calls spread on xe_device_probe(). Change xe_display_init() to use
devm_add_action_or_reset() that will finalize display in the right
order.
While at it, also add a newline and comment about calling
xe_driver_flr_fini.
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
xe device probe uses devm cleanup in most places. However there are a
few cases where this is not possible: when the driver interacts with
component add/del. In that case, the resource group would be cleanup
while the entire device resources are in the process of cleanup. One
example is the xe_gsc_proxy and display using that to interact with mei
and audio.
Add a callback-based remove so the exception doesn't make the probe
use multiple error handling styles.
v2: Change internal API to mimic the devm API. This will make it easier
to migrate in future when devm can be used.
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add a helper to enable a port instead of open-coding it.
While at it rename intel_disable_ddi_buf() to intel_ddi_buf_disable()
for consistency.
v2: (Jani)
- s/intel_enable_ddi_buf/intel_ddi_buf_enable
- s/intel_disable_ddi_buf/intel_ddi_buf_disable
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-11-imre.deak@intel.com
The functions disabling a port for MTL+ and earlier platforms only
differ by an extra step on MTL+ (to disable the D2D link) and the point
at which the port's idle state is waited for. Combine the two functions
accounting for the above differences, removing the duplication.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-10-imre.deak@intel.com
The prefix of the mtl_ddi_enable_d2d() / mtl_ddi_disable_d2d_link()
names show already what are the relevant platforms, so the corresponding
platform check is a detail that can be hidden in the functions, do so.
While at it rename mtl_ddi_disable_d2d_link() to mtl_ddi_disable_d2d()
for symmetry with mtl_ddi_enable_d2d().
v2: s/mtl_ddi_disable_d2d_link/mtl_ddi_disable_d2d (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-9-imre.deak@intel.com
When waiting for a port to get active/idle there is no point in the
complexity of specifying an exact timeout and for that the suitable wait
API instead of just using the maximum timeout. The sequence in
particular is not performance critical at all either and due to
scheduling it's not guaranteed anyhow how long the wait will last at the
given timescale. In the usual case where the wait succeeds the actual
time waited does not change with the increased timeout.
Simplify things accordingly, describing the bspec platform specific
timeouts in code comments.
v2: Clarify the rationale in the commit log. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-8-imre.deak@intel.com
A port can be disabled only via a modeset (or during HW state
sanitization) when the port is enabled. Thus it's not required to check
the port's enabled state before disabling it. In any case if the port
happened to be disabled, the following disabling would be just a nop and
waiting for the buffer's idle state should succeed. Simplify the
disabling sequence accordingly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-7-imre.deak@intel.com
In the past intel_digital_port::dp.prepare_link_retrain() could be
called directly (vs. from a modeset) to retrain an enabled link. In that
case the port had to be first disabled and then re-enabled. That changed
with commit 2885d283cc ("drm/i915/dp: Retrain SST links via a modeset
commit"), after which the only way prepare_link_retrain() can be called
is from a modeset during link training when the port is still disabled.
Simplify things accordingly, assuming the disabled port state.
v2: Don't use drm_i915_private in intel_ddi_prepare_link_retrain(). (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-6-imre.deak@intel.com
Add the missing PHY lane stagger delay programming for ICL-ADL
platforms on TypeC DP outputs.
v2: (Jani)
- Clarify code comment about lane stagger programming.
- Robustify macro calls with parens.
Bspec: 7534, 49533
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214142001.552916-5-imre.deak@intel.com