Commit 4a91fe4c0d ("ASoC: tegra: Add interconnect support") exported
tegra_isomgr_adma_setbw, tegra_isomgr_adma_register and
tegra_isomgr_adma_register APIs, but there are no users of these that
required these symbols to be exported.
Hence, remove the exporting of the symbols.
Fixes: 4a91fe4c0d ("ASoC: tegra: Add interconnect support")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20250213111216.1238344-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Today a PV guest (including dom0) can create 2MB contiguous memory
regions for DMA buffers at max. This has led to problems at least
with the megaraid_sas driver, which wants to allocate a 2.3MB DMA
buffer.
The limiting factor is the frame array used to do the hypercall for
making the memory contiguous, which has 512 entries and is just a
static array in mmu_pv.c.
In order to not waste memory for non-PV guests, put the initial
frame array into .init.data section and dynamically allocate an array
from the .init_after_bootmem hook of PV guests.
In case a contiguous memory area larger than the initially supported
2MB is requested, allocate a larger buffer for the frame list. Note
that such an allocation is tried only after memory management has been
initialized properly, which is tested via a flag being set in the
.init_after_bootmem hook.
Fixes: 9f40ec84a7 ("xen/swiotlb: add alignment check for dma buffers")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When mapping a buffer for DMA via .map_page or .map_sg DMA operations,
there is no need to check the machine frames to be aligned according
to the mapped areas size. All what is needed in these cases is that the
buffer is contiguous at machine level.
So carve out the alignment check from range_straddles_page_boundary()
and move it to a helper called by xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() directly.
Fixes: 9f40ec84a7 ("xen/swiotlb: add alignment check for dma buffers")
Reported-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz>
Tested-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Starting with Rust 1.85.0 (to be released 2025-02-20), `rustc` warns
[1] about disabling neon in the aarch64 hardfloat target:
warning: target feature `neon` cannot be toggled with
`-Ctarget-feature`: unsound on hard-float targets
because it changes float ABI
|
= note: this was previously accepted by the compiler but
is being phased out; it will become a hard error
in a future release!
= note: for more information, see issue #116344
<https://github.com/rust-lang/rust/issues/116344>
Thus, instead, use the softfloat target instead.
While trying it out, I found that the kernel sanitizers were not enabled
for that built-in target [2]. Upstream Rust agreed to backport
the enablement for the current beta so that it is ready for
the 1.85.0 release [3] -- thanks!
However, that still means that before Rust 1.85.0, we cannot switch
since sanitizers could be in use. Thus conditionally do so.
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Ralf Jung <post@ralfj.de>
Cc: Jubilee Young <workingjubilee@gmail.com>
Link: https://github.com/rust-lang/rust/pull/133417 [1]
Link: https://rust-lang.zulipchat.com/#narrow/channel/131828-t-compiler/topic/arm64.20neon.20.60-Ctarget-feature.60.20warning/near/495358442 [2]
Link: https://github.com/rust-lang/rust/pull/135905 [3]
Link: https://github.com/rust-lang/rust/issues/116344
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Ralf Jung <post@ralfj.de>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250210163732.281786-1-ojeda@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
This makes ptrace/get_syscall_info selftest pass on mips o32 and
mips64 o32 by fixing the following two test assertions:
1. get_syscall_info test assertion on mips o32:
# get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432)
# get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch
2. get_syscall_info test assertion on mips64 o32:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
# get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch
The first assertion happens due to mips_get_syscall_arg() trying to access
another task's context but failing to do it properly because get_user() it
calls just peeks at the current task's context. It usually does not crash
because the default user stack always gets assigned the same VMA, but it
is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack
was switched (via setcontext(3) or however) or a non-default process's
thread peeked at, and in any case irrelevant data is obtained just as
observed with the test case.
mips_get_syscall_arg() ought to be using access_remote_vm() instead to
retrieve the other task's stack contents, but given that the data has been
already obtained and saved in `struct pt_regs' it would be an overkill.
The first assertion is fixed for mips o32 by using struct pt_regs.args
instead of get_user() to obtain syscall arguments. This approach works
due to this piece in arch/mips/kernel/scall32-o32.S:
/*
* Ok, copy the args from the luser stack to the kernel stack.
*/
.set push
.set noreorder
.set nomacro
load_a4: user_lw(t5, 16(t0)) # argument #5 from usp
load_a5: user_lw(t6, 20(t0)) # argument #6 from usp
load_a6: user_lw(t7, 24(t0)) # argument #7 from usp
load_a7: user_lw(t8, 28(t0)) # argument #8 from usp
loads_done:
sw t5, PT_ARG4(sp) # argument #5 to ksp
sw t6, PT_ARG5(sp) # argument #6 to ksp
sw t7, PT_ARG6(sp) # argument #7 to ksp
sw t8, PT_ARG7(sp) # argument #8 to ksp
.set pop
.section __ex_table,"a"
PTR_WD load_a4, bad_stack_a4
PTR_WD load_a5, bad_stack_a5
PTR_WD load_a6, bad_stack_a6
PTR_WD load_a7, bad_stack_a7
.previous
arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that
allows fixing the issue by obtaining syscall arguments from struct
pt_regs.regs[4..11] instead of the erroneous use of get_user().
The second assertion is fixed by truncating 64-bit values to 32-bit
syscall arguments.
Fixes: c0ff3c53d4 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <ldv@strace.io>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
We have several places across the kernel where we want to access another
task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making
a call to syscall_get_arguments().
This works for register arguments right away by accessing the task's
`regs' member of `struct pt_regs', however for stack arguments seen with
32-bit/o32 kernels things are more complicated. Technically they ought
to be obtained from the user stack with calls to an access_remote_vm(),
but we have an easier way available already.
So as to be able to access syscall stack arguments as regular function
arguments following the MIPS calling convention we copy them over from
the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in
handle_sys(), to the current stack frame's outgoing argument space at
the top of the stack, which is where the handler called expects to see
its incoming arguments. This area is also pointed at by the `pt_regs'
pointer obtained by task_pt_regs().
Make the o32 stack argument space a proper member of `struct pt_regs'
then, by renaming the existing member from `pad0' to `args' and using
generated offsets to access the space. No functional change though.
With the change in place the o32 kernel stack frame layout at the entry
to a syscall handler invoked by handle_sys() is therefore as follows:
$sp + 68 -> | ... | <- pt_regs.regs[9]
+---------------------+
$sp + 64 -> | $t0 | <- pt_regs.regs[8]
+---------------------+
$sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7]
+---------------------+
$sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6]
+---------------------+
$sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5]
+---------------------+
$sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4]
+---------------------+
$sp + 44 -> | $v1 | <- pt_regs.regs[3]
+---------------------+
$sp + 40 -> | $v0 | <- pt_regs.regs[2]
+---------------------+
$sp + 36 -> | $at | <- pt_regs.regs[1]
+---------------------+
$sp + 32 -> | $zero | <- pt_regs.regs[0]
+---------------------+
$sp + 28 -> | stack argument #8 | <- pt_regs.args[7]
+---------------------+
$sp + 24 -> | stack argument #7 | <- pt_regs.args[6]
+---------------------+
$sp + 20 -> | stack argument #6 | <- pt_regs.args[5]
+---------------------+
$sp + 16 -> | stack argument #5 | <- pt_regs.args[4]
+---------------------+
$sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3]
+---------------------+
$sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2]
+---------------------+
$sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1]
+---------------------+
$sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0]
+---------------------+
holding user data received and with the first 4 frame slots reserved by
the psABI for the compiler to spill the incoming arguments from $a0-$a3
registers (which it sometimes does according to its needs) and the next
4 frame slots designated by the psABI for any stack function arguments
that follow. This data is also available for other tasks to peek/poke
at as reqired and where permitted.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When defer probe happens, there may be below error:
platform 59820000.sai: Resources present before probing
The cpu_mclk clock is from the cpu dai device, if it is not released,
then the cpu dai device probe will fail for the second time.
The cpu_mclk is used to get rate for rate constraint, rate constraint
may be specific for each platform, which is not necessary for machine
driver, so remove it.
Fixes: b86ef53677 ("ASoC: fsl: Add Audio Mixer machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250213070518.547375-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 819935464c ("arm64/hwcap: Describe 2024 dpISA extensions to
userspace") added definitions for HWCAP_FPRCVT, HWCAP_F8MM8 and
HWCAP_F8MM4 but did not include the crucial registration in
arm64_elf_hwcaps. Add it.
Fixes: 819935464c ("arm64/hwcap: Describe 2024 dpISA extensions to userspace")
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250212-arm64-fix-2024-dpisa-v2-1-67a1c11d6001@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Perhaps unsurprisingly there are some platforms where the GTDT isn't
quite right and the Platforms Timer array overflows the length of the
overall table.
While the recently-added sanity checking isn't wrong, it makes it
impossible to boot the kernel on offending platforms. Try to hobble
along and limit the Platform Timer count to the bounds of the table.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Zheng Zengkai <zhengzengkai@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 263e22d6bd ("ACPI: GTDT: Tighten the check for the array of platform timer structures")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20250128001749.3132656-1-oliver.upton@linux.dev
Signed-off-by: Will Deacon <will@kernel.org>
Add keymap for the Siemens Gigaset RC20 remote (RC-5).
Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
If streamzap_callback() receives an urb with any non-critical error
status, i.e. any error code other than -ECONNRESET, -ENOENT or -ESHUTDOWN,
it will try to process IR data, ignoring a possible transfer failure.
Make streamzap_callback() process IR data only when urb->status is 0.
Move processing logic to a separate function to make code cleaner and
more similar to the URB completion handlers in other RC drivers.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 19770693c3 ("V4L/DVB: staging/lirc: add lirc_streamzap driver")
Cc: stable@vger.kernel.org
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Syzkaller has reported a general protection fault at function
ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer
dereference of dev->raw pointer, even though it is checked for NULL in
the same function, which means there is a race condition. It occurs due
to the incorrect order of actions in the streamzap_disconnect() function:
rc_unregister_device() is called before usb_kill_urb(). The dev->raw
pointer is freed and set to NULL in rc_unregister_device(), and only
after that usb_kill_urb() waits for in-progress requests to finish.
If rc_unregister_device() is called while streamzap_callback() handler is
not finished, this can lead to accessing freed resources. Thus
rc_unregister_device() should be called after usb_kill_urb().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 8e9e606400 ("V4L/DVB: staging/lirc: port lirc_streamzap to ir-core")
Cc: stable@vger.kernel.org
Reported-by: syzbot+34008406ee9a31b13c73@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34008406ee9a31b13c73
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
For the time being, the amu_fie_cpus cpumask is being exclusively used
by the AMU-related internals of FIE support and is guaranteed to be
valid on every access currently made. Still the mask is not being
invalidated on one of the error handling code paths, which leaves
a soft spot with theoretical risk of UAF for CPUMASK_OFFSTACK cases.
To make things sound, delay allocating said cpumask
(for CPUMASK_OFFSTACK) avoiding otherwise nasty sanitising case failing
to register the cpufreq policy notifications.
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250131155842.3839098-1-beata.michalska@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a node for the third instance of the eMMC/SD/SDIO controller
found on the MT8188 SoC and keep it disabled.
It is expected that only boards that are using this controller
instance will configure and enable it.
Link: https://lore.kernel.org/r/20241218105409.39165-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add nodes for the DSC0 and MERGE0 blocks, located in VDOSYS0 and
necessary to add support for Display Stream Compression with a
display pipeline that looks like:
[other components] -> DSC0 -> MERGE0 -> Display Interface
Link: https://lore.kernel.org/r/20241218105356.39111-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Certain registers in the AFE IO space require the apll1 clock to be
enabled in order to be read, otherwise the machine hangs (registers like
0x280, 0x410 (AFE_GAIN1_CON0) and 0x830 (AFE_CONN0_5)). During AFE
driver probe, when initializing the regmap for the AFE IO space those
registers are read, resulting in a hang during boot.
This has been observed on the Genio 700 EVK, Genio 510 EVK and
MT8188-Geralt-Ciri Chromebook, all of which are based on the MT8188 SoC.
Assign CLK_TOP_APLL1_D4 as the parent for CLK_TOP_A1SYS_HP, which is
enabled during register read and write, to make sure the apll1 is
enabled during register operations and prevent the MT8188 machines from
hanging during boot.
Cc: stable@vger.kernel.org
Fixes: bd568ce198 ("arm64: dts: mediatek: mt8188: Add audio support")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20250207-mt8188-afe-fix-hang-disabled-apll1-clk-v2-1-a636d844c272@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
ioctl(SIOCDARP/SIOCSARP) operates on a single netns fetched from
an AF_INET socket in inet_ioctl().
Let's hold rtnl_net_lock() for SIOCDARP and SIOCSARP.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250211045057.10419-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marvell 88Q2XXX devices support up to two configurable Light Emitting
Diode (LED). Add minimal LED controller driver supporting the most common
uses with the 'netdev' trigger.
Reviewed-by: Stefan Eichenberger <eichest@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Link: https://patch.msgid.link/20250210-marvell-88q2xxx-leds-v4-1-3a0900dc121f@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The drm_writeback_cleanup_job() function frees "pos" so call
list_del(&pos->list_entry) first to avoid a use after free.
Fixes: 1914ba2b91 ("drm: writeback: Create drmm variants for drm_writeback_connector initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/78abd541-71e9-4b3b-a05d-2c7caf8d5b2f@stanley.mountain
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Going forward, struct intel_display is the main display device data
pointer. Convert as much as possible of intel_combo_phy.[ch] to struct
intel_display, along with intel_phy_is_combo() in intel_display.c.
Drive-by convert some drm_dbg() to drm_dbg_kms() while at it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c2e0a6294a8eaa4c16632881edc4f2d23c576101.1739378096.git.jani.nikula@intel.com
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c965 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
Some users are reporting journal replay takes a long time when there is
excessive number of revoke blocks in the journal. Reported times are
like:
1048576 records - 95 seconds
2097152 records - 580 seconds
The problem is that hash chains in the revoke table gets excessively
long in these cases. Fix the problem by sizing the revoke table
appropriately before the revoke pass.
Thanks to Alexey Zhuravlev <azhuravlev@ddn.com> for benchmarking the
patch with large numbers of revoke blocks [1].
[1] https://lore.kernel.org/all/20250113183107.7bfef7b6@x390.bzzz77.ru
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250121140925.17231-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There's some expressed interest in having the compiler flag
-Wconversion detect at build time certain kinds of potential problems:
https://lore.kernel.org/lkml/20250103182532.GB781381@e132581.arm.com/
As feature detection passes -Wconversion from CFLAGS when set, the
feature detection compile tests need to not fail because of
-Wconversion as the failure will be interpretted as a missing
feature. Switch various types to avoid the -Wconversion issue, the
exact meaning of the code is unimportant as it is typically looking
for header file definitions.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106215443.198633-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
For XDP transmit case, swdata doesn't contain SKB but the
XDP Frame. Infer the correct swdata based on buffer type
and return the XDP Frame for XDP transmit case.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-3-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For successful XDP_TX and XDP_REDIRECT cases, the packet was received
successfully so update RX statistics. Use original received
packet length for that.
TX packets statistics are incremented on TX completion so don't
update it while TX queueing.
If xdp_convert_buff_to_frame() fails, increment tx_dropped.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-2-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
XDP_DROP test:
Before: 460256 rx/s 0 err/s
After: 784130 rx/s 0 err/s
Fixes: 8acacc40f7 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-1-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The struct dump_regs contains 512 bytes of cache_regs, meaning the two
values in perf_sample contribute 1088 bytes of its total 1384 bytes
size. Initializing this much memory has a cost reported by Tavian
Barnes <tavianator@tavianator.com> as about 2.5% when running `perf
script --itrace=i0`:
https://lore.kernel.org/lkml/d841b97b3ad2ca8bcab07e4293375fb7c32dfce7.1736618095.git.tavianator@tavianator.com/
Adrian Hunter <adrian.hunter@intel.com> replied that the zero
initialization was necessary and couldn't simply be removed.
This patch aims to strike a middle ground of still zeroing the
perf_sample, but removing 79% of its size by make user_regs and
intr_regs optional pointers to zalloc-ed memory. To support the
allocation accessors are created for user_regs and intr_regs. To
support correct cleanup perf_sample__init and perf_sample__exit
functions are created and added throughout the code base.
Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250113194345.1537821-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Now for dwmac-loongson {tx,rx}_fifo_size are uninitialised, which means
zero. This means dwmac-loongson doesn't support changing MTU because in
stmmac_change_mtu() it requires the fifo size be no less than MTU. Thus,
set the correct tx_fifo_size and rx_fifo_size for it (16KB multiplied by
queue counts).
Here {tx,rx}_fifo_size is initialised with the initial value (also the
maximum value) of {tx,rx}_queues_to_use. So it will keep as 16KB if we
don't change the queue count, and will be larger than 16KB if we change
(decrease) the queue count. However stmmac_change_mtu() still work well
with current logic (MTU cannot be larger than 16KB for stmmac).
Note: the Fixes tag picked here is the oldest commit and key commit of
the dwmac-loongson series "stmmac: Add Loongson platform support".
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250210134328.2755328-1-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PRMD register is only meaningful on the beginning stage of exception
entry, and it is overwritten with nested irq or exception.
When CPU runs in VM mode, interrupt need be enabled on host. And the
mode for host had better be kernel mode rather than random or user mode.
When VM is running, the running mode with top command comes from CRMD
register, and running mode should be kernel mode since kernel function
is executing with perf command. It needs be consistent with both top and
perf command.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Cache attribute comes from GPA->HPA secondary mmu page table and is
configured when kvm is enabled. It is the same for all VMs, so remove
duplicated cache attribute setting on vCPU context switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
This is typo issue and misusage about GCFG feature macro. The code
is wrong, only that it does not cause obvious problem since GCFG is
set again on vCPU context switch.
Fixes: 0d0df3c99d ("LoongArch: KVM: Implement kvm hardware enable, disable interface")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>