Set SoundWire manager device power state during suspend and resume
sequence for ACP7.0 & ACP7.1 platforms.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-5-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
During runtime suspend scenario, SoundWire wake should be enabled and
during system level suspend scenario SoundWire wake should be disabled.
Implement the SoundWire wake enable/disable sequence as per design flow
for SoundWire poweroff mode.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now, we can support more than 1 soundwire bus clock frequency.
This reverts commit c326356188 ("soundwire: intel_auxdevice: start
the bus at default frequency")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://lore.kernel.org/r/20250205074232.87537-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Frame shape and curr_dr_freq could be updated by sdw_compute_bus_params().
Peripherals will set curr_dr_freq as their frequency. Managers
should do the same. Then update frame shape according to the actual
bus frequency.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://lore.kernel.org/r/20250205074232.87537-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f0 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c_of_match_device() is not used anymore outside of I²C framework,
unexport it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Get matching data in one step by switching to use i2c_get_match_data().
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Switch to use my kernel.org address for I2C ACPI work.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In some cases observed during ESD tests, the TI SN65DSI83 cannot recover
from errors by itself. A full restart of the bridge is needed in those
cases to have the bridge output LVDS signals again.
Also, during tests, cases were observed where reading the status of the
bridge was not even possible. Indeed, in those cases, the bridge stops
to acknowledge I2C transactions. Only a full reset of the bridge (power
off/on) brings back the bridge to a functional state.
The TI SN65DSI83 has some error detection capabilities. Introduce an
error recovery mechanism based on this detection.
The errors detected are signaled through an interrupt. On system where
this interrupt is not available, the driver uses a polling monitoring
fallback to check for errors. When an error is present or when reading
the bridge status leads to an I2C failure, the recovery process is
launched.
Restarting the bridge needs to redo the initialization sequence. This
initialization sequence has to be done with the DSI data lanes driven in
LP11 state. In order to do that, the recovery process resets the whole
output path (i.e the path from the encoder to the connector) where the
bridge is located.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-5-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The current code uses a the reset_pipe() local function to reset the
CRTC outputs.
drm_atomic_helper_reset_crtc() has been introduced recently and it
performs exact same operations.
In order to avoid code duplication, use the new helper instead of the
local function.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-4-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
drm_atomic_helper_reset_crtc() allows to reset the CRTC active outputs.
This resets all active components available between the CRTC and
connectors.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-3-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Both the TI SN65DSI83 and SN65DSI84 bridges have an IRQ pin to signal
errors using interrupt.
This interrupt is not documented in the binding.
Add the missing interrupts property.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210132620.42263-2-herve.codina@bootlin.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes and changes for netfslib:
(1) Fix a number of read-retry hangs, including:
(a) Incorrect getting/putting of references on subreqs as we retry
them.
(b) Failure to track whether a last old subrequest in a retried set is
superfluous.
(c) Inconsistency in the usage of wait queues used for subrequests
(ie. using clear_and_wake_up_bit() whilst waiting on a private
waitqueue).
(Note that waitqueue consistency also needs looking at for
netfs_io_request structs.)
(2) Add stats counters for retries and publish in /proc/fs/netfs/stats.
This is not a fix per se, but is useful in debugging and shouldn't
otherwise change the operation of the code.
(3) Fix the ordering of queuing subrequests with respect to setting the
request flag that says we've now queued them all.
* patches from https://lore.kernel.org/r/20250212222402.3618494-1-dhowells@redhat.com:
netfs: Fix setting NETFS_RREQ_ALL_QUEUED to be after all subreqs queued
netfs: Add retry stat counters
netfs: Fix a number of read-retry hangs
Link: https://lore.kernel.org/r/20250212222402.3618494-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Due to the code that queues a subreq on the active subrequest list getting
moved to netfs_issue_read(), the NETFS_RREQ_ALL_QUEUED flag may now get set
before the list-add actually happens. This is not a problem if the
collection worker happens after the list-add, but it's a race - and, for
9P, where the read from the server is synchronous and done in the
submitting thread, this is a lot more likely.
The result is that, if the timing is wrong, a ref gets leaked because the
collector thinks that all the subreqs have completed (because it can't see
the last one yet) and clears NETFS_RREQ_IN_PROGRESS - at which point, the
collection worker no longer goes into the collector.
This can be provoked with AFS by injecting an msleep() right before the
final subreq is queued.
Fix this by splitting the queuing part out of netfs_issue_read() into a new
function, netfs_queue_read(), and calling it separately. The setting of
NETFS_RREQ_ALL_QUEUED is then done by netfs_queue_read() whilst it is
holding the spinlock (that's probably unnecessary, but shouldn't hurt).
It might be better to set a flag on the final subreq, but this could be a
problem if an error occurs and we can't queue it.
Fixes: e2d46f2ec3 ("netfs: Change the read result collector to only use one work item")
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Closes: https://lore.kernel.org/r/a7x33d4dnMdGTtRivptq6S1i8btK70SNBP2XyX_xwDAhLvgQoPox6FVBOkifq4eBinfFfbZlIkMZBe3QarlWTxoEtHZwJCZbNKtaqrR7PvI=@pm.me/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250212222402.3618494-4-dhowells@redhat.com
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix a number of hangs in the netfslib read-retry code, including:
(1) netfs_reissue_read() doubles up the getting of references on
subrequests, thereby leaking the subrequest and causing inode eviction
to wait indefinitely. This can lead to the kernel reporting a hang in
the filesystem's evict_inode().
Fix this by removing the get from netfs_reissue_read() and adding one
to netfs_retry_read_subrequests() to deal with the one place that
didn't double up.
(2) The loop in netfs_retry_read_subrequests() that retries a sequence of
failed subrequests doesn't record whether or not it retried the one
that the "subreq" pointer points to when it leaves the loop. It may
not if renegotiation/repreparation of the subrequests means that fewer
subrequests are needed to span the cumulative range of the sequence.
Because it doesn't record this, the piece of code that discards
now-superfluous subrequests doesn't know whether it should discard the
one "subreq" points to - and so it doesn't.
Fix this by noting whether the last subreq it examines is superfluous
and if it is, then getting rid of it and all subsequent subrequests.
If that one one wasn't superfluous, then we would have tried to go
round the previous loop again and so there can be no further unretried
subrequests in the sequence.
(3) netfs_retry_read_subrequests() gets yet an extra ref on any additional
subrequests it has to get because it ran out of ones it could reuse to
to renegotiation/repreparation shrinking the subrequests.
Fix this by removing that extra ref.
(4) In netfs_retry_reads(), it was using wait_on_bit() to wait for
NETFS_SREQ_IN_PROGRESS to be cleared on all subrequests in the
sequence - but netfs_read_subreq_terminated() is now using a wait
queue on the request instead and so this wait will never finish.
Fix this by waiting on the wait queue instead. To make this work, a
new flag, NETFS_RREQ_RETRYING, is now set around the wait loop to tell
the wake-up code to wake up the wait queue rather than requeuing the
request's work item.
Note that this flag replaces the NETFS_RREQ_NEED_RETRY flag which is
no longer used.
(5) Whilst not strictly anything to do with the hang,
netfs_retry_read_subrequests() was also doubly incrementing the
subreq_counter and re-setting the debug index, leaving a gap in the
trace. This is also fixed.
One of these hangs was observed with 9p and with cifs. Others were forced
by manual code injection into fs/afs/file.c. Firstly, afs_prepare_read()
was created to provide an changing pattern of maximum subrequest sizes:
static int afs_prepare_read(struct netfs_io_subrequest *subreq)
{
struct netfs_io_request *rreq = subreq->rreq;
if (!S_ISREG(subreq->rreq->inode->i_mode))
return 0;
if (subreq->retry_count < 20)
rreq->io_streams[0].sreq_max_len =
umax(200, 2222 - subreq->retry_count * 40);
else
rreq->io_streams[0].sreq_max_len = 3333;
return 0;
}
and pointed to by afs_req_ops. Then the following:
struct netfs_io_subrequest *subreq = op->fetch.subreq;
if (subreq->error == 0 &&
S_ISREG(subreq->rreq->inode->i_mode) &&
subreq->retry_count < 20) {
subreq->transferred = subreq->already_done;
__clear_bit(NETFS_SREQ_HIT_EOF, &subreq->flags);
__set_bit(NETFS_SREQ_NEED_RETRY, &subreq->flags);
afs_fetch_data_notify(op);
return;
}
was inserted into afs_fetch_data_success() at the beginning and struct
netfs_io_subrequest given an extra field, "already_done" that was set to
the value in "subreq->transferred" by netfs_reissue_read().
When reading a 4K file, the subrequests would get gradually smaller, a new
subrequest would be allocated around the 3rd retry and then eventually be
rendered superfluous when the 20th retry was hit and the limit on the first
subrequest was eased.
Fixes: e2d46f2ec3 ("netfs: Change the read result collector to only use one work item")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20250212222402.3618494-2-dhowells@redhat.com
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Steve French <stfrench@microsoft.com>
cc: Ihor Solodrai <ihor.solodrai@pm.me>
cc: Eric Van Hensbergen <ericvh@kernel.org>
cc: Latchesar Ionkov <lucho@ionkov.net>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Christian Schoenebeck <linux_oss@crudebyte.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: v9fs@lists.linux.dev
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove hard-coded strings by using the str_on_off() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250212091227.1217-3-thorsten.blum@linux.dev
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the driver initialization fails, the vkms_exit() function might
access an uninitialized or freed default_config pointer and it might
double free it.
Fix both possible errors by initializing default_config only when the
driver initialization succeeded.
Reported-by: Louis Chauvet <louis.chauvet@bootlin.com>
Closes: https://lore.kernel.org/all/Z5uDHcCmAwiTsGte@louis-chauvet-laptop/
Fixes: 2df7af93fd ("drm/vkms: Add vkms_config type")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmremann@suse.de>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212084912.3196-1-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Add PSR2_MAN_TRK_CTL writing into DSB commit in intel_atomic_dsb_finish.
Taking PSR lock over DSB commit is not needed because PSR2_MAN_TRK_CTL is
now written only by DSB.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-8-jouni.hogander@intel.com
Allow writing PSR2_MAN_TRK_CTL using DSB by using intel_de_write_dsb. Do
not check intel_dp->psr.lock being held when using DSB. This assertion
doesn't make sense as in case of using DSB the actual write happens later
and we are not taking intel_dp->psr.lock mutex over dsb commit.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-7-jouni.hogander@intel.com
In LunarLake we have SFF_CTL register which contains SFF bit ored with
respective SFF bit in PSR2_MAN_TRK_CTL register. Use this register instead
of the bit in PSR2_MAN_TRK_CTL on frontbuffer tracking callbacks. This
helps us avoiding taking psr mutex when performing atomic commit.
We don't need to set the CFF bit as selective update configuration in
PSR2_MAN_TRL_CTL is not overwritten anymore. I.e. we have valid
configuration in PSR2_MAN_TRK_CTL and in plane SEL_FETCH_* registers when
SFF bit gets cleared by the HW in case something triggers "frame change"
event after SFF bit is cleared.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-6-jouni.hogander@intel.com
We are preparing for a change where only frontbuffer flush will use
single full frame bit of a new register (SFF_CTL) available on LunarLake
onwards.
It shouldn't be necessary to have SFF bit set if CFF bit is set in
PSR2_MAN_TRK_CTL -> removing setting it on all platforms as there is not
reason to have it different on older platforms.
v2: commit message improved
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-2-jouni.hogander@intel.com
Here are some new modem device ids and a couple of related cleanups of
the device id table.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZ64AAwAKCRALxc3C7H1l
CEf5AP9m/cucRzOid2mOQiCYpD5zhMn/MZnH/AFB647nN2dFZwD/Rgs64qk2ZZUI
49XbIl6SeoLWp2CdUS/M7ra+jKqa3AE=
=OkGu
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.14-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.14-rc3
Here are some new modem device ids and a couple of related cleanups of
the device id table.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.14-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: drop MeiG Smart defines
USB: serial: option: fix Telit Cinterion FN990A name
USB: serial: option: add Telit Cinterion FN990B compositions
USB: serial: option: add MeiG Smart SLM828
The Mediatek MT7922 WiFi device advertises FLR support, but it apparently
does not work, and all subsequent config reads return ~0:
pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint
pciback 0000:01:00.0: not ready 65535ms after FLR; giving up
After an FLR, pci_dev_wait() waits for the device to become ready. Prior
to d591f6804e ("PCI: Wait for device readiness with Configuration RRS"),
it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR
(~0). If it times out, pci_dev_wait() returns -ENOTTY and
__pci_reset_function_locked() tries the next available reset method.
Typically this is Secondary Bus Reset, which does work, so the MT7922 is
eventually usable.
After d591f6804e, if Configuration Request Retry Status Software
Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it
is something other than the special 0x0001 Vendor ID that indicates a
completion with RRS status.
When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001,
i.e., the config read was completed with RRS, or a valid Vendor ID. On the
MT7922, it seems that all config reads after FLR return ~0 indefinitely.
When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's
a valid Vendor ID and the device is now ready, so it returns with success.
After pci_dev_wait() returns success, we restore config space and continue.
Since the MT7922 is not actually ready after the FLR, the restore fails and
the device is unusable.
We considered changing pci_dev_wait() to continue polling if a
PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did
before d591f6804e, although we have to wait for the timeout and then fall
back to SBR. But it doesn't work for SR-IOV VFs, which *always* return
0xffff as the Vendor ID.
Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This
will cause fallback to another reset method, such as SBR.
Link: https://lore.kernel.org/r/20250212193516.88741-1-helgaas@kernel.org
Fixes: d591f6804e ("PCI: Wait for device readiness with Configuration RRS")
Link: https://github.com/QubesOS/qubes-issues/issues/9689#issuecomment-2582927149
Link: https://lore.kernel.org/r/Z4pHll_6GX7OUBzQ@mail-itl
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: stable@vger.kernel.org
'struct scmi_imx_misc_ctrl_set_in' has a zero length array in the end,
The sizeof will not count 'value[]', and hence Tx size will be smaller
than actual size for Tx,and SCMI firmware will flag this as protocol
error.
Fix this by enlarge the Tx size with 'num * sizeof(__le32)' to count in
the size of data.
Fixes: 61c9f03e22 ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Tested-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250123063441.392555-1-peng.fan@oss.nxp.com>
(sudeep.holla: Commit rewording and replace hardcoded sizeof(__le32) value)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This is part of a prandom cleanup, which removes
next_pseudo_random32 and replaces it with the standard PRNG.
Signed-off-by: Markus Theil <theil.markus@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211063332.16542-2-theil.markus@gmail.com
Merge the immutable branch rockchip into next, to allow it to be tested
together with the changes that are targeted for v6.15.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For some usecases a consumer driver requires its device to remain power-on
from the PM domain perspective during runtime. Using dev PM qos along with
the genpd governors, doesn't work for this case as would potentially
prevent the device from being runtime suspended too.
To support these usecases, let's introduce dev_pm_genpd_rpm_always_on() to
allow consumers drivers to dynamically control the behaviour in genpd for a
device that is attached to it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1738736156-119203-4-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add ROCKCHIP_SIP_SUSPEND_MODE to pass down parameters to Trusted Firmware
in order to decide suspend mode. Currently only add ROCKCHIP_SLEEP_PD_CONFIG
which teaches firmware to power down controllers or not.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/1738736156-119203-3-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Set flag GENPD_FLAG_ACTIVE_WAKEUP to bcm2835_power genpd, then when a
device is set as wakeup source using device_set_wakeup_enable, the power
domain could be kept on to make sure the device could wakeup the system.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250201111926.31278-1-wahrenst@gmx.net
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
During an earlier commit, the comment from SM6350 was copied without
modifying. Adjust the comment to reflect the defines.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241202-rpmpd-sm6375-v1-1-12a4f0182133@fairphone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On BeagleBone Black:
OF: /ocp: Read of boolean property 'clocks' with a value.
OF: /ocp/interconnect@44c00000: Read of boolean property 'clocks' with a value.
OF: /ocp/interconnect@48000000: Read of boolean property 'clocks' with a value.
OF: /ocp/interconnect@4a000000: Read of boolean property 'clocks' with a value.
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/accb12bd6d048d95bd1feea07dd1a799ad3f8b31.1737532423.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Instead of manually adding/removing attribute groups, set
(struct device_driver).dev_groups pointer to have the driver
core do it.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250210155333.1145867-1-ovidiu.panait.oss@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move arch specific action from core.c to the init() function of spt.c.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://lore.kernel.org/r/20250212010621.1003663-1-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove hard-coded strings by using the str_on_off() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250210123103.112938-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
"con_id" is an established variable name for the GPIO naming for drivers.
Use it instead of "func" in the int3472 driver, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250211072841.7713-4-sakari.ailus@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>