Breno Leitao says:
====================
netconsole: Add support for CPU population
The current implementation of netconsole sends all log messages in
parallel, which can lead to an intermixed and interleaved output on the
receiving side. This makes it challenging to demultiplex the messages
and attribute them to their originating CPUs.
As a result, users and developers often struggle to effectively analyze
and debug the parallel log output received through netconsole.
Example of a message got from produciton hosts:
------------[ cut here ]------------
------------[ cut here ]------------
refcount_t: saturated; leaking memory.
WARNING: CPU: 2 PID: 1613668 at lib/refcount.c:22 refcount_warn_saturate+0x5e/0xe0
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 26 PID: 4139916 at lib/refcount.c:25 refcount_warn_saturate+0x7d/0xe0
Modules linked in: bpf_preload(E) vhost_net(E) tun(E) vhost(E)
This series of patches introduces a new feature to the netconsole
subsystem that allows the automatic population of the CPU number in the
userdata field for each log message. This enhancement provides several
benefits:
* Improved demultiplexing of parallel log output: When multiple CPUs are
sending messages concurrently, the added CPU number in the userdata
makes it easier to differentiate and attribute the messages to their
originating CPUs.
* Better visibility into message sources: The CPU number information
gives users and developers more insight into which specific CPU a
particular log message came from, which can be valuable for debugging
and analysis.
The changes in this series are as follows Patches::
Patch "consolidate send buffers into netconsole_target struct"
=================================================
Move the static buffers to netconsole target, from static declaration
in send_msg_no_fragmentation() and send_msg_fragmented().
Patch "netconsole: Rename userdata to extradata"
=================================================
Create the a concept of extradata, which encompasses the concept of
userdata and the upcoming sysdatao
Sysdata is a new concept being added, which is basically fields that are
populated by the kernel. At this time only the CPU#, but, there is a
desire to add current task name, kernel release version, etc.
Patch "netconsole: Helper to count number of used entries"
===========================================================
Create a simple helper to count number of entries in extradata. I am
separating this in a function since it will need to count userdata and
sysdata. For instance, when the user adds an extra userdata, we need to
check if there is space, counting the previous data entries (from
userdata and cpu data)
Patch "Introduce configfs helpers for sysdata features"
======================================================
Create the concept of sysdata feature in the netconsole target, and
create the configfs helpers to enable the bit in nt->sysdata
Patch "Include sysdata in extradata entry count"
================================================
Add the concept of sysdata when counting for available space in the
buffer. This will protect users from creating new userdata/sysdata if
there is no more space
Patch "netconsole: add support for sysdata and CPU population"
===============================================================
This is the core patch. Basically add a new option to enable automatic
CPU number population in the netconsole userdata Provides a new "cpu_nr"
sysfs attribute to control this feature
Patch "netconsole: selftest: test CPU number auto-population"
=============================================================
Expands the existing netconsole selftest to verify the CPU number
auto-population functionality Ensures the received netconsole messages
contain the expected "cpu=<CPU>" entry in the message. Test different
permutation with userdata
Patch "netconsole: docs: Add documentation for CPU number auto-population"
=============================================================================
Updates the netconsole documentation to explain the new CPU number
auto-population feature Provides instructions on how to enable and use
the feature
I believe these changes will be a valuable addition to the netconsole
subsystem, enhancing its usefulness for kernel developers and users.
PS: This patchset is on top of the patch that created
netcons_fragmented_msg selftest:
https://lore.kernel.org/all/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@debian.org/
---
Changes in v5:
- Fixed a kernel doc syntax syntax (Simon)
- Link to v4: https://lore.kernel.org/r/20250204-netcon_cpu-v4-0-9480266ef556@debian.org
Changes in v4:
- Fixed Kernel doc for netconsole_target (Simon)
- Fixed a typo in disable_sysdata_feature (Simon)
- Improved sysdata_cpu_nr_show() to return !! in a bit-wise operation
- Link to v3: https://lore.kernel.org/r/20250124-netcon_cpu-v3-0-12a0d286ba1d@debian.org
Changes in v3:
- Moved the buffer into netconsole_target, avoiding static functions in
the send path (Jakub).
- Fix a documentation error (Randy Dunlap)
- Created a function that handle all the extradata, consolidating it in
a single place (Jakub)
- Split the patch even more, trying to simplify the review.
- Link to v2: https://lore.kernel.org/r/20250115-netcon_cpu-v2-0-95971b44dc56@debian.org
Changes in v2:
- Create the concept of extradata and sysdata. This will make the design
easier to understand, and the code easier to read.
* Basically extradata encompasses userdata and the new sysdata.
Userdata originates from user, and sysdata originates in kernel.
- Improved the test to send from a very specific CPU, which can be
checked to be correct on the other side, as suggested by Jakub.
- Fixed a bug where CPU # was populated at the wrong place
- Link to v1: https://lore.kernel.org/r/20241113-netcon_cpu-v1-0-d187bf7c0321@debian.org
====================
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the netconsole documentation to explain the new feature that
allows automatic population of the CPU number.
The key changes include introducing a new section titled "CPU number
auto population in userdata", explaining how to enable the CPU number
auto-population feature by writing to the "populate_cpu_nr" file in the
netconsole configfs hierarchy.
This documentation update ensures users are aware of the new CPU number
auto-population functionality and how to leverage it for better
demultiplexing and visibility of parallel netconsole output.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new selftest to verify that the netconsole module correctly
handles CPU runtime data in sysdata. The test validates three scenarios:
1. Basic CPU sysdata functionality - verifies that cpu=X is appended to
messages
2. CPU sysdata with userdata - ensures CPU data works alongside userdata
3. Disabled CPU sysdata - confirms no CPU data is included when disabled
The test uses taskset to control which CPU sends messages and verifies
the reported CPU matches the one used. This helps ensure that netconsole
accurately tracks and reports the originating CPU of messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add infrastructure to automatically append kernel-generated data (sysdata)
to netconsole messages. As the first use case, implement CPU number
population, which adds the CPU that sent the message.
This change introduces three distinct data types:
- extradata: The complete set of appended data (sysdata + userdata)
- userdata: User-provided key-value pairs from userspace
- sysdata: Kernel-populated data (e.g. cpu=XX)
The implementation adds a new configfs attribute 'cpu_nr' to control CPU
number population per target. When enabled, each message is tagged with
its originating CPU. The sysdata is dynamically updated at message time
and appended after any existing userdata.
The CPU number is formatted as "cpu=XX" and is added to the extradata
buffer, respecting the existing size limits.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify count_extradata_entries() to include sysdata fields when
calculating the total number of extradata entries. This change ensures
that the sysdata feature, specifically the CPU number field, is
correctly counted against the MAX_EXTRADATA_ITEMS limit.
The modification adds a simple check for the CPU_NR flag in the
sysdata_fields, incrementing the entry count accordingly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a bitfield to store sysdata features in the
netconsole_target struct. It also adds configfs helpers to enable
or disable the CPU_NR feature, which populates the CPU number in
sysdata.
The patch provides the necessary infrastructure to set or unset the
CPU_NR feature, but does not modify the message itself.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper function nr_extradata_entries() to count the number of used
extradata entries in a netconsole target. This refactors the duplicate
code for counting entries into a single function, which will be reused
by upcoming CPU sysdata changes.
The helper uses list_count_nodes() to count the number of children in
the userdata group configfs hierarchy.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename "userdata" to "extradata" since this structure will hold both
user and system data in future patches. Keep "userdata" term only for
data that comes from userspace (configfs), while "extradata" encompasses
both userdata and future kerneldata.
These are the rules of the design
1. extradata_complete will hold userdata and sysdata (coming)
2. sysdata will come after userdata_length
3. extradata_complete[userdata_length] string will be replaced at every
message
5. userdata is replaced when configfs changes (update_userdata())
6. sysdata is replaced at every message
Example:
extradata_complete = "userkey=uservalue cpu=42"
userdata_length = 17
sysdata_length = 7 (space (" ") is part of sysdata)
Since sysdata is still not available, you will see the following in the
send functions:
extradata_len = nt->userdata_length;
The upcoming patches will, which will add support for sysdata, will
change it to:
extradata_len = nt->userdata_length + sysdata_len;
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the static buffers from send_msg_no_fragmentation() and
send_msg_fragmented() into the netconsole_target structure. This
simplifies the code by:
- Eliminating redundant static buffers
- Centralizing buffer management in the target structure
- Reducing memory usage by 1KB (one buffer instead of two)
The buffer in netconsole_target is protected by target_list_lock,
maintaining the same synchronization semantics as the original code.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Newer Thinkpad AMD platforms are using V9 DYTC and this changes the
profiles used for PSC mode. Add support for this update.
Tested on P14s G5 AMD
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250206193953.58365-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On ThinkPad X120e, fan speed is reported in ticks per revolution
rather than RPM.
Recalculate the fan speed value reported for ThinkPad X120e
to RPM based on a 22.5 kHz clock.
Based on the information on
https://www.thinkwiki.org/wiki/How_to_control_fan_speed,
the same problem is highly likely to be relevant to at least Edge11,
but Edge11 is not addressed in this patch.
Signed-off-by: Sybil Isabel Dorsett <sybdorsett@proton.me>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250203163255.5525-1-sybdorsett@proton.me
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Support for OTP area access on ESMT F50L1G41LB and F50D1G41LB chips.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Support for OTP area access on Micron MT29F2G01ABAGD chip.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The global functions spinand_otp_read() and spinand_otp_write() have
been introduced. Since most SPI-NAND flashes read/write OTP in the same
way, let's define global functions to avoid code duplication.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change the functions spinand_wait() and spinand_otp_page_size() from
static to global so that SPI NAND flash drivers don't duplicate it.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The MTD subsystem already supports accessing two OTP areas: user and
factory. User areas can be written by the user.
This patch provides the SPINAND_FACT_OTP_INFO and SPINAND_USER_OTP_INFO
macros to add parameters to spinand_info.
To implement OTP operations, the client (flash driver) is provided with
callbacks for user area:
.read(), .write(), .info(), .lock(), .erase();
and for factory area:
.read(), .info();
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change these functions from static to global so that to use them later
in OTP operations. Since reading OTP pages is no different from reading
pages from the main area.
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The !CONFIG_SECURITY dummy function was declared as an "extern int"
instead of "static inline" (likely a copy-n-paste error), which was
was causing the compiler to complain about a missing prototype. This
patch converts the dummy definition over to a "static inline" to resolve
the compiler problems.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/oe-kbuild-all/202502081912.TeokpAAe-lkp@intel.com/
Fixes: c6ad9fdbd4 ("io_uring,lsm,selinux: add LSM hooks for io_uring_setup()")
Signed-off-by: Paul Moore <paul@paul-moore.com>
The "saved_evl" pointer is a offset into the middle of a non-NULL struct.
It can't be NULL and the check is slightly confusing. Delete the check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/ec38214e-0bbb-4c5a-94ff-b2b2d4c3f245@stanley.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> #dw-edma
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20250114191021.854080-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Due to job transition, I am stepping down as IDXD maintainer.
Vinicius will take over maintainership responsibilities moving forward.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250131173551.3979408-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Have additional check for max channel page during the probe
to cover if any offset overshoot happens due to wrong DT
configuration.
Fixes: 68811c928f ("dmaengine: tegra210-adma: Support channel page")
Cc: stable@vger.kernel.org
Signed-off-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250210135413.2504272-3-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ADMA base and page address are represented using a 64-bit variable.
To accurately derive the exact ADMA page number provided from the DT
properties, use the div_u64() to divide the address difference between
adma page and base address by the page offset.
This change fixes the below error
"ERROR: modpost: "__udivdi3" [drivers/dma/tegra210-adma.ko] undefined!
ld: drivers/dma/tegra210-adma.o: in function `tegra_adma_probe':
tegra210-adma.c:(.text+0x12cf): undefined reference to `__udivdi3'"
Fixes: 68811c928f ("dmaengine: tegra210-adma: Support channel page")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412250204.GCQhdKe3-lkp@intel.com/
Signed-off-by: Mohan Kumar D <mkumard@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250210135413.2504272-2-mkumard@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The iopf_queue_remove_device() helper removes a device from the per-iommu
iopf queue when PRI is disabled on the device. It responds to all
outstanding iopf's with an IOMMU_PAGE_RESP_INVALID code and detaches the
device from the queue.
However, it fails to release the group structure that represents a group
of iopf's awaiting for a response after responding to the hardware. This
can cause a memory leak if iopf_queue_remove_device() is called with
pending iopf's.
Fix it by calling iopf_free_group() after the iopf group is responded.
Fixes: 1991123271 ("iommu: Track iopf group instead of last fault")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250117055800.782462-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Using of_property_read_bool() for non-boolean properties has been
deprecated in favour of of_property_present() and since commit
c141ecc3ce ("of: Warn when of_property_read_bool() is used on
non-boolean properties") this also generates a warning:
OF: /soc@0/soundwire@3330000/wcd9380-tx@0,3: Read of boolean property 'qcom,tx-port-mapping' with a value.
Switch to using of_property_present() to look for "qcom,tx-port-mapping"
properties.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://patch.msgid.link/20250210132128.7734-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a compatible string for SPDIF on RK3588, which is similar to the
one on RK3568.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250120-rk3588-spdif-v1-1-1415f5871dc7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a description, required properties, appropriate compatibles and
missing properties like clocks and clock-names which are not defined in
the text binding for all the SoCs that are supported by microchip.
Update the text binding name `atmel-dma.txt` to
`atmel,at91sam9g45-dma.yaml` for the files which reference to
`atmel-dma.txt`. Drop Tudor name from maintainers.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Signed-off-by: Charan Pedumuru <charan.pedumuru@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250203-test-v4-1-a9ec3eded1c7@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The conditional involving sdev->first_boot in acp_sof_ipc_irq_thread()
will succeed only once, i.e. during the very first run of the
DSP firmware.
Use the unlikely() annotation to help improve branch prediction
accuracy.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-4-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases, e.g. during resuming from suspend, there is a possibility
that some IPC reply messages get received by the host while the DSP
firmware has not yet reached the complete boot state.
Detect when this happens and do not attempt to process the unexpected
replies from DSP. Instead, provide proper debugging support.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-3-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove all the includes for headers which are not (directly) used from
the Vangogh SOF driver sources.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-2-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stress testing resume from suspend on Valve Steam Deck OLED (Galileo)
revealed that the DSP firmware could enter an unrecoverable faulty
state, where the kernel ring buffer is flooded with IPC related error
messages:
[ +0.017002] snd_sof_amd_vangogh 0000:04:00.5: acp_sof_ipc_send_msg: Failed to acquire HW lock
[ +0.000054] snd_sof_amd_vangogh 0000:04:00.5: ipc3_tx_msg_unlocked: ipc message send for 0x30100000 failed: -22
[ +0.000005] snd_sof_amd_vangogh 0000:04:00.5: Failed to setup widget PIPELINE.6.ACPHS1.IN
[ +0.000004] snd_sof_amd_vangogh 0000:04:00.5: Failed to restore pipeline after resume -22
[ +0.000003] snd_sof_amd_vangogh 0000:04:00.5: PM: dpm_run_callback(): pci_pm_resume returns -22
[ +0.000009] snd_sof_amd_vangogh 0000:04:00.5: PM: failed to resume async: error -22
[...]
[ +0.002582] PM: suspend exit
[ +0.065085] snd_sof_amd_vangogh 0000:04:00.5: ipc tx error for 0x30130000 (msg/reply size: 12/0): -22
[ +0.000499] snd_sof_amd_vangogh 0000:04:00.5: error: failed widget list set up for pcm 1 dir 0
[ +0.000011] snd_sof_amd_vangogh 0000:04:00.5: error: set pcm hw_params after resume
[ +0.000006] snd_sof_amd_vangogh 0000:04:00.5: ASoC: error at snd_soc_pcm_component_prepare on 0000:04:00.5: -22
[...]
A system reboot would be necessary to restore the speakers
functionality.
However, by delaying a bit any host to DSP transmission right after
the firmware boot completed, the issue could not be reproduced anymore
and sound continued to work flawlessly even after performing thousands
of suspend/resume cycles.
Introduce the post_fw_run_delay ACP quirk to allow providing the
aforementioned delay via the snd_sof_dsp_ops->post_fw_run() callback for
the affected devices.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20250207-sof-vangogh-fixes-v1-1-67824c1e4c9a@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from David Lechner <dlechner@baylibre.com>:
As a recap, here is the background and end goal of this series:
The AXI SPI Engine is a SPI controller that has the ability to record a
series of SPI transactions and then play them back using a hardware
trigger. This allows operations to be performed, repeating many times,
without any CPU intervention. This is needed for achieving high data
rates (millions of samples per second) from ADCs and DACs that are
connected via a SPI bus.
The offload hardware interface consists of a trigger input and a data
output for the RX data. These are connected to other hardware external
to the SPI controller.
To record one or more transactions, commands and TX data are written
to memories in the controller (RX buffer is not used since RX data gets
streamed to an external sink). This sequence of transactions can then be
played back when the trigger input is asserted.
This series includes core SPI support along with the first SPI
controller (AXI SPI Engine) and SPI peripheral (AD7944 ADC) that use
them. This enables capturing analog data at 2 million samples per
second.
The hardware setup looks like this:
+-------------------------------+ +------------------+
| | | |
| SOC/FPGA | | AD7944 ADC |
| +---------------------+ | | |
| | AXI SPI Engine | | | |
| | SPI Bus ============ SPI Bus |
| | | | | |
| | +---------------+ | | | |
| | | Offload 0 | | | +------------------+
| | | RX DATA OUT > > > > |
| | | TRIGGER IN < < < v |
| | +---------------+ | ^ v |
| +---------------------+ ^ v |
| | AXI PWM | ^ v |
| | CH0 > ^ v |
| +---------------------+ v |
| | AXI DMA | v |
| | CH0 < < < |
| +---------------------+ |
| |
+-------------------------------+
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
The MIPI SoundWire Device Class for Audio (SDCA) specification defines
most details of the hardware in ACPI using the MIPI Discovery and
Configuration (DisCo) specification. This patch chain adds support for
parsing most of this information into the kernel such that future work
can make use of it to construct CODEC devices and soundcards.
The most notable outstanding work here, is parsing the separate
properties for the Control Numbers (roughly equivalent to channels)
within an individual Control. The separate Control Numbers are
supported but currently only the scheme were a single default etc. is
supplied for all. This should not be super hard to add in the future
but isn't currently required by any of the hardware I am working to
support.
Merge series from Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>:
A rather aggressive but arguably much needed refactorization of the SOF
imx drivers. The refactorization is meant to address the code duplication
in the imx drivers and decrease the coding effort required for introducing
a new imx platform.
After refactorization and imx95 introduction, only two drivers remain:
imx8 (meant for the imx8 series: imx8 (imx8qm), imx8x (imx8qxp), imx8m,
and imx8ulp) and imx9 (meant for the imx9 series: imx95 (for now)).
The series also includes the introduction of the imx95 driver.
bos_lock is to protect list of bos used by client, it is
not required to protect bo->client so bring it outside of
bos_lock.
Fixes: b27970f3e1 ("drm/xe: Add tracking support for bos per client")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250205051042.1991192-1-tejas.upadhyay@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Currently, all zeroing ranges, punch holes, collapse ranges, and insert
ranges first wait for all existing direct I/O workers to complete, and
then they acquire the mapping's invalidate lock before performing the
actual work. These common components are nearly identical, so we can
simplify the code by factoring them out into the ext4_fallocate().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-11-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, all five sub-functions of ext4_fallocate() acquire the
inode's i_rwsem at the beginning and release it before exiting. This
process can be simplified by factoring out the management of i_rwsem
into the ext4_fallocate() function.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-10-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now the real job of normal fallocate are open coded in ext4_fallocate(),
factor out a new helper ext4_do_fallocate() to do the real job, like
others functions (e.g. ext4_zero_range()) in ext4_fallocate() do, this
can make the code more clear, no functional changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-9-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Simplify ext4_insert_range() and align its code style with that of
ext4_collapse_range(). Refactor it by: a) renaming variables, b)
removing redundant input parameter checks and moving the remaining
checks under i_rwsem in preparation for future refactoring, and c)
renaming the three stale error tags.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-8-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Simplify ext4_collapse_range() and align its code style with that of
ext4_zero_range() and ext4_punch_hole(). Refactor it by: a) renaming
variables, b) removing redundant input parameter checks and moving
the remaining checks under i_rwsem in preparation for future
refactoring, and c) renaming the three stale error tags.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-7-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The current implementation of ext4_zero_range() contains complex
position calculations and stale error tags. To improve the code's
clarity and maintainability, it is essential to clean up the code and
improve its readability, this can be achieved by: a) simplifying and
renaming variables, making the style the same as ext4_punch_hole(); b)
eliminating unnecessary position calculations, writing back all data in
data=journal mode, and drop page cache from the original offset to the
end, rather than using aligned blocks; c) renaming the stale out_mutex
tags.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The current implementation of ext4_punch_hole() contains complex
position calculations and stale error tags. To improve the code's
clarity and maintainability, it is essential to clean up the code and
improve its readability, this can be achieved by: a) simplifying and
renaming variables; b) eliminating unnecessary position calculations;
c) writing back all data in data=journal mode, and drop page cache from
the original offset to the end, rather than using aligned blocks,
d) renaming the stale error tags.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
There is no need to write back all data before punching a hole in
non-journaled mode since it will be dropped soon after removing space.
Therefore, the call to filemap_write_and_wait_range() can be eliminated.
Besides, similar to ext4_zero_range(), we must address the case of
partially punched folios when block size < page size. It is essential to
remove writable userspace mappings to ensure that the folio can be
faulted again during subsequent mmap write access.
In journaled mode, we need to write dirty pages out before discarding
page cache in case of crash before committing the freeing data
transaction, which could expose old, stale data, even if synchronization
has been performed.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 'ad5cd4f4ee ("ext4: fix fallocate to use file_modified to
update permissions consistently"), we can update mtime and ctime
appropriately through file_modified() when doing zero range, collapse
rage, insert range and punch hole, hence there is no need to explicit
update times in those paths, just drop them.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When zeroing a range of folios on the filesystem which block size is
less than the page size, the file's mapped blocks within one page will
be marked as unwritten, we should remove writable userspace mappings to
ensure that ext4_page_mkwrite() can be called during subsequent write
access to these partial folios. Otherwise, data written by subsequent
mmap writes may not be saved to disk.
$mkfs.ext4 -b 1024 /dev/vdb
$mount /dev/vdb /mnt
$xfs_io -t -f -c "pwrite -S 0x58 0 4096" -c "mmap -rw 0 4096" \
-c "mwrite -S 0x5a 2048 2048" -c "fzero 2048 2048" \
-c "mwrite -S 0x59 2048 2048" -c "close" /mnt/foo
$od -Ax -t x1z /mnt/foo
000000 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58
*
000800 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59
*
001000
$umount /mnt && mount /dev/vdb /mnt
$od -Ax -t x1z /mnt/foo
000000 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58
*
000800 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
001000
Fix this by introducing ext4_truncate_page_cache_block_range() to remove
writable userspace mappings when truncating a partial folio range.
Additionally, move the journal data mode-specific handlers and
truncate_pagecache_range() into this function, allowing it to serve as a
common helper that correctly manages the page cache in preparation for
block range manipulations.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>