Refactor all thermal control methods to use the newly defined awcc_priv
state container instead of global variables. While at it, rename
create_thermal_profile() to awcc_platform_profile_init() and introduce
alienware_awcc_setup() to set up the "AWCC" WMI device driver data.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-4-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add WMI drivers for LEGACY and WMAX devices.
This involves moving the platform device registration to a helper
function that is now called from the driver's preferred WMI device
driver probe. In the case of the WMAX this is done only if
`!quirks->thermal` because the newer WMAX interface doesn't support any
of the LED features of this driver. This also eliminates the need to
check for `quirks->num_zones > 0` inside alienfx_probe().
Only one WMI driver is registered on module initialization to prevent
registering a duplicate platform device.
Additionally, create_thermal_profile() now takes wmi_device * instead of
platform_device *.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-3-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a state container for the "alienware-wmi" platform device and
initialize it on the new alienfx_probe(). Migrate all LED control functions
to use this state container to support upcoming file split.
Additionally move the led_classdev registration to the platform driver
probe and make it device managed.
Drop alienware_zone_init() and alienware_zone_exit() because they are no
longer needed and mimic the `quirks->num_zone > 0` check by failing the
platform device probe.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250207154610.13675-2-kuurtb@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Commit 8c87215dd3 ("ata: libahci_platform: support non-consecutive
port numbers") modified ahci_platform_get_resources() to allow
identifying the ports of a controller that are defined as child nodes of
the controller node in order to support non-consecutive port numbers (as
defined by the platform device tree).
However, this commit also erroneously sets bit 0 of
hpriv->mask_port_map when the platform devices tree does not define port
child nodes, to match the fact that the temporary default number of
ports used in that case is 1 (which is also consistent with the fact
that only index 0 of hpriv->phys[] is initialized with the call to
ahci_platform_get_phy(). But doing so causes ahci_platform_init_host()
to initialize and probe only the first port, even if this function
determines that the controller has in fact multiple ports using the
capability register of the controller (through a call to
ahci_nr_ports()). This can be seen with the ahci_mvebu driver (Armada
385 SoC) with the second port declared as "dummy":
ahci-mvebu f10a8000.sata: masking port_map 0x3 -> 0x1
ahci-mvebu f10a8000.sata: AHCI vers 0001.0000, 32 command slots, 6 Gbps, platform mode
ahci-mvebu f10a8000.sata: 1/2 ports implemented (port mask 0x1)
ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
scsi host0: ahci-mvebu
scsi host1: ahci-mvebu
ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 40 lpm-pol 0
ata2: DUMMY
Fix this issue by removing setting bit 0 of hpriv->mask_port_map when
the platform device tree does not define port child nodes.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Fixes: 8c87215dd3 ("ata: libahci_platform: support non-consecutive port numbers")
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20250207232915.1439174-1-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Device specific schemas should not allow undefined properties which is
what 'additionalProperties: true' allows. Add the missing child nodes
and fix this constraint.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250203213056.13827-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
So far, the main condition for using LMTT has been to check that
the device is a discrete gfx.
Let's add a dedicated function to check if the device supports LMTT
as not all future discrete GPU platforms will require LMTT.
v2:
- use xe_has_device_lmtt only when necessary - leave IS_DGFX for other
things related to LMEM provisioning
v3:
- remove IS_SRIOV_PF condition from xe_device_has_lmtt (Michal
Wajdeczko)
- keep IS_SRIOV_PF asserts in LMTT-related code (Michal Wajdeczko)
v4:
- update commit description
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207113111.853821-2-piotr.piorkowski@intel.com
Don't use an uninitialised stack variable, and just return 0
on the non-error path.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502100911.8c9DbtKD-lkp@intel.com/
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add power_profile firmware boot param and set it to 0 by default
which is default FW power profile.
Implement IVPU_TEST_MODE_D0I2_DISABLE which is used for setting
power profile boot param value to 1 which prevents NPU from entering
d0i2 power state.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-7-jacek.lawrynowicz@linux.intel.com
Add IVPU_TEST_MODE_CLK_RELINQ_[DISABLE|ENABLE] that overrides
workaround for disabling clock relinquish for testing purposes.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-6-jacek.lawrynowicz@linux.intel.com
Use ivpu_gem_prime_import() based on drm_gem_prime_import_dev()
for importing buffers, removing optimization for same device
imports. This optimization reused the same ivpu_bo object in multiple
contexts but a single buffer can be MMU-mapped only to a single context.
Each import now creates a new instance of ivpu_bo object that shares
the same sg_table but have separate MMU mappings.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-5-jacek.lawrynowicz@linux.intel.com
Add debugfs interface to modify following priority bands properties:
* grace period
* process grace period
* process quantum
This allows for the adjustment of hardware scheduling algorithm parameters
for each existing priority band, facilitating validation and fine-tuning.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-4-jacek.lawrynowicz@linux.intel.com
Increment the runtime PM counter when entering
ivpu_context_abort_work_fn() to prevent the device
from suspending while the function is executing.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204084622.2422544-3-jacek.lawrynowicz@linux.intel.com
The LOOKUP_ bits are not in order, which can make it awkward when adding
new bits. Two bits have recently been added to the end which makes them
look like "scoping flags", but in fact they aren't.
Also LOOKUP_PARENT is described as "internal use only" but is used in
fs/nfs/
This patch:
- Moves these three flags into the "pathwalk mode" section
- changes all bits to use the BIT(n) macro
- Allocates bits in order leaving gaps between the sections,
and documents those gaps.
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250206054504.2950516-8-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Lenovo IdeaPad Z570 with NVIDIA GeForce Ge 540M doesn't have sound on
the discrete GPU. The HDA controller in DGPU is disabled by BIOS, but
then reenabled by quirk_nvidia_hda(). The probe fails and ends up with
the "GPU sound probed, but not operational" error.
Add this laptop to DMI-based denylist to prevent probe early. DMI is
used, because the audio device has zero subsystem IDs, and this entry
would be too much, blocking all 540M chips:
PCI_DEVICE_SUB(0x10de, 0x0bea, 0x0000, 0x0000)
Also, this laptop comes in a variety of modifications with different
NVIDIA GPUs, so the DMI check will cover them all.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://patch.msgid.link/20250208214602.39607-3-maxtram95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
quirk_nvidia_hda() forcefully enables HDA controller on all NVIDIA GPUs,
because some buggy BIOSes leave it disabled. However, some dual-GPU
laptops do not have a functional HDA controller in DGPU, and BIOS
disables it on purpose. After quirk_nvidia_hda() reenables this dummy
HDA controller, attempting to probe it fails at azx_first_init(), which
is too late to cancel the probe, as it happens in azx_probe_continue().
The sna_hda_intel driver calls azx_free() and stops the chip, however,
it stays probed, and from the runtime PM point of view, the device
remains active (it was set as active by the PCI subsystem on probe). It
prevents vga_switcheroo from turning off the DGPU, because
pci_create_device_link() syncs power management for video and audio
devices.
Affected devices should be added to driver_denylist to prevent them from
probing early. This patch helps identify such devices by printing a
warning, and also forces the device to the suspended state to allow
vga_switcheroo turn off DGPU.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://patch.msgid.link/20250208214602.39607-2-maxtram95@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Document the MYIR Remi Pi" which is based on the Renesas
RZ/G2L ("R9A07G044L2") SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/20250131-myir-remi-pi-v3-1-2dda53e79291@collabora.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gen P7 VF support the extended stats and is prevented
by a VF check. Fix the check to issue the FW command
for GenP7 VFs also.
Fixes: 1801d87b35 ("RDMA/bnxt_re: Support new 5760X P7 devices")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1738657285-23968-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The cited comment removed the netdev notifier register call
from the driver. But, it did not remove the cleanup code from
the unload path. As a result, driver unload is not clean and
resulted in undesired behaviour.
Fixes: d3b15fcc42 ("RDMA/bnxt_re: Remove deliver net device event")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1738657285-23968-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is a possibility that ulp_irq_stop and ulp_irq_start
callbacks will be called when the device is in detached state.
This can cause a crash due to NULL pointer dereference as
the rdev is already freed.
Fixes: cc5b9b48d4 ("RDMA/bnxt_re: Recover the device when FW error is detected")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1738657285-23968-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the bnxt_re_async_notifier() callback, the way driver retrieves
rdev pointer is wrong. The rdev pointer should be parsed from
adev pointer as while registering with the L2 for ULP, driver uses
the aux device pointer for the handle.
Fixes: 7fea327840 ("RDMA/bnxt_re: Add Async event handling support")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1738657285-23968-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://patch.msgid.link/598031332ce738c82286a158cb66eb7e735b2e79.1738746904.git.namcao@linutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PTL-H uses the same configuration as PTL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-4-peter.ujfalusi@linux.intel.com
Use same recipes as PTL for PTL-H.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250210081730.22916-3-peter.ujfalusi@linux.intel.com
This commit makes use of appletb_bl_brightness_map instead of using if
statements and magic numbers to set default brightness, and thus simplifies
the code.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This commit addresses the sparse warning flagged by the kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502091105.ZsLoBSIh-lkp@intel.com/
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Rewrite __real_pte() and __rpte_to_hidx() as static inline in order to
avoid following warnings/errors when building with 4k page size:
CC arch/powerpc/mm/book3s64/hash_tlb.o
arch/powerpc/mm/book3s64/hash_tlb.c: In function 'hpte_need_flush':
arch/powerpc/mm/book3s64/hash_tlb.c:49:16: error: variable 'offset' set but not used [-Werror=unused-but-set-variable]
49 | int i, offset;
| ^~~~~~
CC arch/powerpc/mm/book3s64/hash_native.o
arch/powerpc/mm/book3s64/hash_native.c: In function 'native_flush_hash_range':
arch/powerpc/mm/book3s64/hash_native.c:782:29: error: variable 'index' set but not used [-Werror=unused-but-set-variable]
782 | unsigned long hash, index, hidx, shift, slot;
| ^~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501081741.AYFwybsq-lkp@intel.com/
Fixes: ff31e10546 ("powerpc/mm/hash64: Store the slot information at the right offset for hugetlb")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/e0d340a5b7bd478ecbf245d826e6ab2778b74e06.1736706263.git.christophe.leroy@csgroup.eu
Erhard reports the following KASAN hit on Talos II (power9) with kernel 6.13:
[ 12.028126] ==================================================================
[ 12.028198] BUG: KASAN: user-memory-access in copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028260] Write of size 8 at addr 0000187e458f2000 by task systemd/1
[ 12.028346] CPU: 87 UID: 0 PID: 1 Comm: systemd Tainted: G T 6.13.0-P9-dirty #3
[ 12.028408] Tainted: [T]=RANDSTRUCT
[ 12.028446] Hardware name: T2P9D01 REV 1.01 POWER9 0x4e1202 opal:skiboot-bc106a0 PowerNV
[ 12.028500] Call Trace:
[ 12.028536] [c000000008dbf3b0] [c000000001656a48] dump_stack_lvl+0xbc/0x110 (unreliable)
[ 12.028609] [c000000008dbf3f0] [c0000000006e2fc8] print_report+0x6b0/0x708
[ 12.028666] [c000000008dbf4e0] [c0000000006e2454] kasan_report+0x164/0x300
[ 12.028725] [c000000008dbf600] [c0000000006e54d4] kasan_check_range+0x314/0x370
[ 12.028784] [c000000008dbf640] [c0000000006e6310] __kasan_check_write+0x20/0x40
[ 12.028842] [c000000008dbf660] [c000000000578e8c] copy_to_kernel_nofault+0x8c/0x1a0
[ 12.028902] [c000000008dbf6a0] [c0000000000acfe4] __patch_instructions+0x194/0x210
[ 12.028965] [c000000008dbf6e0] [c0000000000ade80] patch_instructions+0x150/0x590
[ 12.029026] [c000000008dbf7c0] [c0000000001159bc] bpf_arch_text_copy+0x6c/0xe0
[ 12.029085] [c000000008dbf800] [c000000000424250] bpf_jit_binary_pack_finalize+0x40/0xc0
[ 12.029147] [c000000008dbf830] [c000000000115dec] bpf_int_jit_compile+0x3bc/0x930
[ 12.029206] [c000000008dbf990] [c000000000423720] bpf_prog_select_runtime+0x1f0/0x280
[ 12.029266] [c000000008dbfa00] [c000000000434b18] bpf_prog_load+0xbb8/0x1370
[ 12.029324] [c000000008dbfb70] [c000000000436ebc] __sys_bpf+0x5ac/0x2e00
[ 12.029379] [c000000008dbfd00] [c00000000043a228] sys_bpf+0x28/0x40
[ 12.029435] [c000000008dbfd20] [c000000000038eb4] system_call_exception+0x334/0x610
[ 12.029497] [c000000008dbfe50] [c00000000000c270] system_call_vectored_common+0xf0/0x280
[ 12.029561] --- interrupt: 3000 at 0x3fff82f5cfa8
[ 12.029608] NIP: 00003fff82f5cfa8 LR: 00003fff82f5cfa8 CTR: 0000000000000000
[ 12.029660] REGS: c000000008dbfe80 TRAP: 3000 Tainted: G T (6.13.0-P9-dirty)
[ 12.029735] MSR: 900000000280f032 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI> CR: 42004848 XER: 00000000
[ 12.029855] IRQMASK: 0
GPR00: 0000000000000169 00003fffdcf789a0 00003fff83067100 0000000000000005
GPR04: 00003fffdcf78a98 0000000000000090 0000000000000000 0000000000000008
GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00003fff836ff7e0 c000000000010678 0000000000000000
GPR16: 0000000000000000 0000000000000000 00003fffdcf78f28 00003fffdcf78f90
GPR20: 0000000000000000 0000000000000000 0000000000000000 00003fffdcf78f80
GPR24: 00003fffdcf78f70 00003fffdcf78d10 00003fff835c7239 00003fffdcf78bd8
GPR28: 00003fffdcf78a98 0000000000000000 0000000000000000 000000011f547580
[ 12.030316] NIP [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030361] LR [00003fff82f5cfa8] 0x3fff82f5cfa8
[ 12.030405] --- interrupt: 3000
[ 12.030444] ==================================================================
Commit c28c15b6d2 ("powerpc/code-patching: Use temporary mm for
Radix MMU") is inspired from x86 but unlike x86 is doesn't disable
KASAN reports during patching. This wasn't a problem at the begining
because __patch_mem() is not instrumented.
Commit 465cabc97b ("powerpc/code-patching: introduce
patch_instructions()") use copy_to_kernel_nofault() to copy several
instructions at once. But when using temporary mm the destination is
not regular kernel memory but a kind of kernel-like memory located
in user address space. Because it is not in kernel address space it is
not covered by KASAN shadow memory. Since commit e4137f0881 ("mm,
kasan, kmsan: instrument copy_from/to_kernel_nofault") KASAN reports
bad accesses from copy_to_kernel_nofault(). Here a bad access to user
memory is reported because KASAN detects the lack of shadow memory and
the address is below TASK_SIZE.
Do like x86 in commit b3fd8e83ad ("x86/alternatives: Use temporary
mm for text poking") and disable KASAN reports during patching when
using temporary mm.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Close: https://lore.kernel.org/all/20250201151435.48400261@yea/
Fixes: 465cabc97b ("powerpc/code-patching: introduce patch_instructions()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/1c05b2a1b02ad75b981cfc45927e0b4a90441046.1738577687.git.christophe.leroy@csgroup.eu
There are some typos in comments/messages:
- althougth -> although
- asume -> assume
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250206082457.9148-1-algonell@gmail.com
This function tells the firmware what rates it can use.
Put the 3SS and 4SS HT rates supported by the other station into the
rate mask.
Remove the 3SS and 4SS rates from the rate mask if the hardware only has
2 spatial streams.
And finally, select the right rate ID (a parameter for the firmware)
when the hardware has 3 spatial streams.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/48d1d90f-2aeb-4ec5-9a24-0980e10eae1e@gmail.com
Although the RTL8814AU only has 3 spatial streams, maybe some other chip
has 4.
Correct the TX power index and TX power limit calculations for 3SS and
4SS HT/VHT rates.
With this the RTL8814AU can set the TX power correctly.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/d0c0e126-0794-4c4e-9203-ea39a707b673@gmail.com
These structs and arrays are never modified, so make them const:
rtw_band_2ghz
rtw_band_5ghz
rtw_pci_tx_queue_idx_addr
rtw_pci_ops
rtw_cck_rates
rtw_ofdm_rates
rtw_ht_1s_rates
rtw_ht_2s_rates
rtw_vht_1s_rates
rtw_vht_2s_rates
rtw_rate_section
rtw_rate_size
rtw_sdio_ops
rtw_usb_ops
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/502f124e-ccf3-4c09-80a4-1e5c5304822b@gmail.com
The existing code is suitable for chips with up to 2 spatial streams.
Inform the firmware about the rates it's allowed to use when
transmitting 3 spatial streams.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/08e2f328-1aab-4e50-93ac-c1e5dd9541ac@gmail.com
These members of struct rtw_chip_info each have a size of 2. Increase
their size to 4, which is the number of RF paths the RTL8814AU has.
This is required to read and write the RF registers of the RTL8814AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/7a4d8209-b8af-4943-b5de-f53d6edf591a@gmail.com
Currently this struct has the members required for chips with 2 RF
paths. Add more members to support chips with 4 RF paths, like the
RTL8814AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/be5a73f4-a0fe-43d6-9457-930cde199284@gmail.com
After the firmware is uploaded, download_firmware_validate() checks some
bits in REG_MCUFW_CTRL to see if everything went okay. The
RTL8814AU power on sequence sets bits 13 and 12 to 2, which this
function does not expect, so it thinks the firmware upload failed.
Make download_firmware_validate() ignore bits 13 and 12.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/049d2887-22fc-47b7-9e59-62627cb525f8@gmail.com
Don't call ltecoex_read_reg() and ltecoex_reg_write() when the
ltecoex_addr member of struct rtw_chip_info is NULL. The RTL8814AU
doesn't have this feature.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/55b5641f-094e-4f94-9f79-ac053733f2cf@gmail.com
There is a typo in debug messages:
- afer -> after
Fix it via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203180913.5435-1-algonell@gmail.com
Since there are two function features for now, func_bitmap[] has single
one element, which BITMAP_FROM_U64() generating two elements is exceeded.
Change to assign function bitmap barely.
With i386-allmodconfig (a 32 bit system), it throws
>> include/linux/bitmap.h:736:33: warning: excess elements in array initializer
736 | ((unsigned long) ((u64)(n) >> 32))
| ^
drivers/net/wireless/realtek/rtw89/regd.c:16:34: note: in expansion of macro 'BITMAP_FROM_U64'
16 | .func_bitmap = { BITMAP_FROM_U64(_fmap), }, \
| ^~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw89/regd.c:20:9: note: in expansion of macro 'COUNTRY_REGD'
20 | COUNTRY_REGD("00", RTW89_WW, RTW89_WW, RTW89_WW, 0x0);
| ^~~~~~~~~~~~
Fixes: 79a36fc56b ("wifi: rtw89: regd: handle supported regulatory functions by country")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502031932.BMQ4lhJT-lkp@intel.com/
Cc: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250205014051.13765-1-pkshih@realtek.com
The TWS(True wireless stereo) serials Bluetooth audio device need to keep
packet traffic not only with DUT, it also need to synchronize packet with
its assistant earbud. And all the BR/EDR Bluetooth device need to do page
scan to keep re-connect event sensitively between different DUT.
These behavior will make TWS Bluetooth device cost more time slot to keep
the good audio performance. This patch decrease half of Wi-Fi slot(from
40ms to 20ms) in a single cycle. Make the slot more flexible to prevent
audio lag. The single cycle will be shorter, then it will bring some slot
protection cost make Wi-Fi throughput decrease about 5%.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250205013233.10945-3-pkshih@realtek.com
If the slot duration is 0, the firmware timer will trigger timer hang at
the timer initializing state in a low rate due to hardware algorithm.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250205013233.10945-2-pkshih@realtek.com
A firmeware file contains multi-firmware with a header to represent
contents. The mfw_hdr->fw_nr is to define number of firmware in file.
+-----+-------+------+---------+--------------+
| sig | fw_nr | rsvd | version | reserved |
+---------------------------------------------+ --
fw 0 | cv | type | mp | rsvd | shift | size | rsvd | \
+---------------------------------------------+ |
fw 1 | cv | type | mp | rsvd | shift | size | rsvd | | mfw_hdr->fw_nr
+---------------------------------------------+ |
fw N-1 | ... | /
+=============================================+ --
| fw 0 content |
| (pointed by fw0 shift/size) |
+=============================================+
To avoid Coverity warning, validate header is in range of firmware size,
and also validate the range of actual firmware content is in range.
Addresses-Coverity-ID: 1494046 ("Untrusted loop bound")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203072911.47313-4-pkshih@realtek.com
Adding beacon BW offset, OP1dB table and rfe_type to lps_ml_cmn_info.
These information will help FW to configure RX more accurately.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250203072911.47313-3-pkshih@realtek.com