Commit graph

1,403,262 commits

Author SHA1 Message Date
Yu Zhang(Yuriy)
9d13950acb wifi: ath11k: fix wrong overriding for VHT Beamformee STS Capability
Current code in ath11k_mac_set_txbf_conf overrides nsts, which is
incorrect as it confuses nss and nsts. nss is Number of Spatial
Streams,nsts is Number of Space-Time Streams.

As mentioned in Fixes: 55b5ee3357, the nss used when acting as a
beamformee in VHT mode should be reported by the firmware and should not
be greater than the number of receiving antennas - 1. The num_rx_chains
related nss rather than nsts.

If STBC is enabled, nsts is greater than nss. About nss are mapped to
nsts, refer to IEEE Std 802.11-2020: 19.3.11.9.2 Space-time block coding
(STBC), Table 19-18—Constellation mapper output to spatial mapper input
for STBC.

Remove wrong overriding for nsts of VHT Beamformee STS Capability,
acting DL MU-MIMO in VHT mode is working properly.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04479-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1

Fixes: 55b5ee3357 ("wifi: ath11k: fix number of VHT beamformee spatial streams")
Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124075953.2282354-1-quic_yuzha@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:29 -08:00
Yu Zhang(Yuriy)
b78c02f7c7 wifi: ath11k: add support for MU EDCA
The current code does not have the MU EDCA feature, so it cannot support
the use of EDCA by STA in specific UL MU HE TB PPDU transmissions. Refer
to IEEE Std 802.11ax-2021 "9.4.2.251 MU EDCA Parameter Set element",
"26.2.7 EDCA operation using MU EDCA parameters".

Add ath11k_mac_op_conf_tx_mu_edca() to construct the MU EDCA parameters
received from mac80211 into WMI WMM parameters,and send to the firmware
according to the different WMM type flags.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04523-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1

Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124061343.2263467-1-quic_yuzha@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:29 -08:00
Lingbo Kong
0a43c3a520 wifi: ath12k: Add support for reading variant from ACPI to download board data file
Currently, ath12k does not support reading variant from ACPI board data
filename extension for downloading board data file.

To address this issue, obtain the string of the ACPI data filename
extension and use it as part of the string to search for the board data
file from board-2.bin.

This patch will not affect QCN9274, because only WCN7850 supports ACPI.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20250113074810.29729-5-quic_lingbok@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:29 -08:00
Lingbo Kong
33fdeb544e wifi: ath12k: Adjust the timing to access ACPI table
Currently, the timing for accessing the ACPI table is inappropriate.

Due to special ACPI requirements, the ACPI table must be obtained before
downloading the board data file. Therefore, adjust the timing for accessing
the ACPI table accordingly.

This patch will not affect QCN9274, because only WCN7850 supports ACPI.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20250113074810.29729-4-quic_lingbok@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:29 -08:00
Lingbo Kong
c6a7c0b09d wifi: ath12k: Add Support for enabling or disabling specific features based on ACPI bitflag
Currently, ath12k does not support enable or disable specific features by
ACPI bitflag.

To address this issue, obtain the ACPI bitflag value and use it to
selectively enable or disable specific features.

This patch will not affect QCN9274, because only WCN7850 supports ACPI.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20250113074810.29729-3-quic_lingbok@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:29 -08:00
Lingbo Kong
b59d1f8207 wifi: ath12k: Add support for obtaining the buffer type ACPI function bitmap
Currently, ath12k does not support obtaining the buffer type ACPI function
bitmap.

To solve this issue, change the code to support obtaining the buffer type
ACPI function bitmap.

This patch will not affect QCN9274, because only WCN7850 supports ACPI.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://patch.msgid.link/20250113074810.29729-2-quic_lingbok@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:29 -08:00
Aditya Kumar Singh
2fc98b24ad wifi: ath12k: handle ath12k_mac_ieee80211_sta_bw_to_wmi() for link sta
Currently ath12k_mac_ieee80211_sta_bw_to_wmi() handles the bandwidth from
sta's deflink member. This works only for non-ML station. Now that MLO
support is there, extend this function to use link sta instead of deflink.

Additionally, in ath12k_mac_handle_link_sta_state(), the link sta structure
is not accessible, making it difficult to fetch the bandwidth there.
However, ath12k_mac_station_assoc() does reference the link sta structure.
Therefore, move the initial assignment of the arsta bandwidth member to
ath12k_mac_station_assoc().

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250110-fix_link_sta_bandwidth_update-v1-2-61b6f3ef2ea3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:28 -08:00
Aditya Kumar Singh
090c645b2a wifi: ath12k: relocate ath12k_mac_ieee80211_sta_bw_to_wmi()
An upcoming change will invoke ath12k_mac_ieee80211_sta_bw_to_wmi() from a
line located above its current definition. Hence, relocate it to above
so that it can be invoked later on.

No functionality changes. Compile tested only.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250110-fix_link_sta_bandwidth_update-v1-1-61b6f3ef2ea3@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:28 -08:00
Avula Sri Charan
268c73d470 wifi: ath12k: Avoid napi_sync() before napi_enable()
In case of MHI error a reset work will be queued which will try
napi_disable() after napi_synchronize().

As the napi will be only enabled after qmi_firmware_ready event,
trying napi_synchronize() before napi_enable() will result in
indefinite sleep in case of a firmware crash in QMI init sequence.

To avoid this, introduce napi_enabled flag to check if napi is enabled
or not before calling napi_synchronize().

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250124090058.3194299-1-quic_tamizhr@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:28 -08:00
Aditya Kumar Singh
36f002a3e3 wifi: ath12k: prevent CSA counter to reach 0 and hit WARN_ON_ONCE
Currently, when the driver receives a channel switch count WMI event from
the firmware with a count greater than 1, it calls
ieee80211_beacon_update_cntdwn(). If the beacon transmission fails, the
event will be received again with the previous count value. In this
scenario, the host decrements the mac80211 counter again, causing it to
move ahead of the firmware counter. Ultimately, when the firmware count
reaches 1, the mac80211 counter will reach zero, triggering a
WARN_ON_ONCE(). Therefore, there is a need to check the count value in the
event.

Hence to fix this, maintain the current ongoing counter in arvif. If the
count in the event does not match the expected value, silently discard the
event.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-4-420c42fcfecf@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:28 -08:00
Aditya Kumar Singh
e26a6989b1 wifi: ath12k: update the latest CSA counter
At present, the driver configures the firmware to send the Channel Switch
(CS) count event only when the count reaches zero during a Channel Switch
Announcement (CSA). For frames managed by the upper layer, where the driver
does not update the counter, the CS count in these frames remains unchanged
throughout the entire CSA period. This is because the upper layer is not
aware of the latest ongoing count. Indicating same count value throughout
the CSA time is wrong and could lead to connection instabilities.

Fix this by configuring firmware to send CS count event for every count and
then accordingly decrementing the count in mac80211.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-3-420c42fcfecf@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:28 -08:00
Aditya Kumar Singh
f9c88d65e8 wifi: ath12k: fix handling of CSA offsets in beacon template command
The driver is informed of the counter offsets in the beacon during CSA
through the ieee80211_mutable_offsets structure. According to the
documentation for the cntdwn_counter_offs member, "This array can contain
zero values which should be ignored." However, the current implementation
uses these values unconditionally, without checking for zeros.

Whenever CSA is active, these offsets are guaranteed to be set. Therefore,
add a check for CSA active status before setting the CSA switch count
offsets. This ensures that the offsets are only set when CSA is active,
preventing incorrect configurations.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-2-420c42fcfecf@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:28 -08:00
Aditya Kumar Singh
4094445969 wifi: ath12k: update beacon template function to use arvif structure
The current code has ath12k_wmi_bcn_tmpl() accepting separate ar and
vdev_id parameters. However, ath12k_link_vif structure can be used to
derive both of these.

Hence, simplify the function signature.

Later change needs arvif pointer access within the function hence it is
better if arvif is directly passed now.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20250124-ath12k_mlo_csa-v2-1-420c42fcfecf@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03 14:43:28 -08:00
Christophe JAILLET
14807b4a4e scsi: Constify struct pci_error_handlers
'struct pci_error_handlers' are not modified in these drivers.

Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.

On a x86_64, with allmodconfig, as an example:
Before:
======
   text	   data	    bss	    dec	    hex	filename
  39049	   6429	    112	  45590	   b216	drivers/scsi/aacraid/linit.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
  39113	   6365	    112	  45590	   b216	drivers/scsi/aacraid/linit.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/efdec8425981e10fc398fa2ac599c9c45d930561.1737318548.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 17:35:58 -05:00
Seunghui Lee
1a78a56ea6 scsi: ufs: core: Fix error return with query response
There is currently no mechanism to return error from query responses.
Return the error and print the corresponding error message with it.

Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250118023808.24726-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 17:34:24 -05:00
Long Li
87c4b5e8a6 scsi: storvsc: Set correct data length for sending SCSI command without payload
In StorVSC, payload->range.len is used to indicate if this SCSI command
carries payload. This data is allocated as part of the private driver data
by the upper layer and may get passed to lower driver uninitialized.

For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
REQUEST_SENSE while reusing the buffer from a failed command. The private
data section may have stale data from the previous command.

If the SCSI command doesn't carry payload, the driver may use this value as
is for communicating with host, resulting in possible corruption.

Fix this by always initializing this value.

Fixes: be0cf6ca30 ("scsi: storvsc: Set the tablesize based on the information given by the host")
Cc: stable@kernel.org
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 17:28:07 -05:00
André Draszik
f8fb2403dd scsi: ufs: core: Fix use-after free in init error and remove paths
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.

During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:

  Call trace:
   kfree+0x60/0x2d8 (P)
   kvfree+0x44/0x60
   blk_crypto_profile_destroy_callback+0x28/0x70
   devm_action_release+0x1c/0x30
   release_nodes+0x6c/0x108
   devres_release_all+0x98/0x100
   device_unbind_cleanup+0x20/0x70
   really_probe+0x218/0x2d0

In other words, the initialisation code flow is:

  platform-device probe
    ufshcd_pltfrm_init()
      ufshcd_alloc_host()
        scsi_host_alloc()
          allocation of struct ufs_hba
          creation of scsi-host devices
    devm_blk_crypto_profile_init()
      devm registration of cleanup handler using platform-device

and during error handling of ufshcd_pltfrm_init() or during driver
removal:

  ufshcd_dealloc_host()
    scsi_host_put()
      put_device(scsi-host)
        release of struct ufs_hba
  put_device(platform-device)
    crypto cleanup handler

To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:

    * the crypto profile and all other ufs_hba-owned resources are
      destroyed before SCSI (as they've been registered after)
    * a memleak is plugged in tc-dwc-g210-pci.c remove() as a
      side-effect
    * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
      it's not needed anymore
    * no future drivers using ufshcd_alloc_host() could ever forget
      adding the cleanup

Fixes: cb77cb5abe ("blk-crypto: rename blk_keyslot_manager to blk_crypto_profile")
Fixes: d76d9d7d10 ("scsi: ufs: use devm_blk_ksm_init()")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250124-ufshcd-fix-v4-1-c5d0144aae59@linaro.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 17:20:01 -05:00
Igor Pylypiv
9ff7c383b8 scsi: core: Do not retry I/Os during depopulation
Fail I/Os instead of retry to prevent user space processes from being
blocked on the I/O completion for several minutes.

Retrying I/Os during "depopulation in progress" or "depopulation restore in
progress" results in a continuous retry loop until the depopulation
completes or until the I/O retry loop is aborted due to a timeout by the
scsi_cmd_runtime_exceeced().

Depopulation is slow and can take 24+ hours to complete on 20+ TB HDDs.
Most I/Os in the depopulation retry loop end up taking several minutes
before returning the failure to user space.

Cc: stable@vger.kernel.org # 4.18.x: 2bbeb8d scsi: core: Handle depopulation and restoration in progress
Cc: stable@vger.kernel.org # 4.18.x
Fixes: e37c7d9a03 ("scsi: core: sanitize++ in progress")
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20250131184408.859579-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 17:10:15 -05:00
Rik van Riel
5363ee9d11 scsi: core: Use GFP_NOIO to avoid circular locking dependency
Filesystems can write to disk from page reclaim with __GFP_FS
set. Marc found a case where scsi_realloc_sdev_budget_map() ends up in
page reclaim with GFP_KERNEL, where it could try to take filesystem
locks again, leading to a deadlock.

WARNING: possible circular locking dependency detected
6.13.0 #1 Not tainted
------------------------------------------------------
kswapd0/70 is trying to acquire lock:
ffff8881025d5d78 (&q->q_usage_counter(io)){++++}-{0:0}, at: blk_mq_submit_bio+0x461/0x6e0

but task is already holding lock:
ffffffff81ef5f40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x9f/0x760

The full lockdep splat can be found in Marc's report:

https://lkml.org/lkml/2025/1/24/1101

Avoid the potential deadlock by doing the allocation with GFP_NOIO, which
prevents both filesystem and block layer recursion.

Reported-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250129104525.0ae8421e@fangorn
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 17:08:13 -05:00
Daniel Brackenbury
9271af9d84 HID: topre: Fix n-key rollover on Realforce R3S TKL boards
Newer model R3* Topre Realforce keyboards share an issue with their older
R2 cousins where a report descriptor fixup is needed in order for n-key
rollover to work correctly, otherwise only 6-key rollover is available.
This patch adds some new hardware IDs for the R3S 87-key keyboard and
makes amendments to the existing hid-topre driver in order to change the
correct byte in the new model.

Signed-off-by: Daniel Brackenbury <daniel.brackenbury@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-03 22:59:42 +01:00
Zhang Lixu
18c966b628 HID: intel-ish-hid: ipc: Add Panther Lake PCI device IDs
Add device IDs of Panther Lake-H and Panther Lake-P into ishtp support
list.

Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-03 22:58:49 +01:00
Avri Altman
839a74b564 scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed
This commit addresses an issue where clk_gating.state is being toggled in
ufshcd_setup_clocks() even if clock gating is not allowed.

The fix is to add a check for hba->clk_gating.is_initialized before toggling
clk_gating.state in ufshcd_setup_clocks().

Since clk_gating.lock is now initialized unconditionally, it can no longer
lead to the spinlock being used before it is properly initialized, but
instead it is mostly for documentation purposes.

Fixes: 1ab27c9cf8 ("ufs: Add support for clock gating")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 16:53:00 -05:00
Avri Altman
3d4114a1d3 scsi: ufs: core: Ensure clk_gating.lock is used only after initialization
Address a lockdep warning triggered by the use of the clk_gating.lock before
it is properly initialized. The warning is as follows:

[    4.388838] INFO: trying to register non-static key.
[    4.395673] The code is fine but needs lockdep annotation, or maybe
[    4.402118] you didn't initialize this object before use?
[    4.407673] turning off the locking correctness validator.
[    4.413334] CPU: 5 UID: 0 PID: 58 Comm: kworker/u32:1 Not tainted 6.12-rc1 #185
[    4.413343] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[    4.413362] Call trace:
[    4.413364]  show_stack+0x18/0x24 (C)
[    4.413374]  dump_stack_lvl+0x90/0xd0
[    4.413384]  dump_stack+0x18/0x24
[    4.413392]  register_lock_class+0x498/0x4a8
[    4.413400]  __lock_acquire+0xb4/0x1b90
[    4.413406]  lock_acquire+0x114/0x310
[    4.413413]  _raw_spin_lock_irqsave+0x60/0x88
[    4.413423]  ufshcd_setup_clocks+0x2c0/0x490
[    4.413433]  ufshcd_init+0x198/0x10ec
[    4.413437]  ufshcd_pltfrm_init+0x600/0x7c0
[    4.413444]  ufs_qcom_probe+0x20/0x58
[    4.413449]  platform_probe+0x68/0xd8
[    4.413459]  really_probe+0xbc/0x268
[    4.413466]  __driver_probe_device+0x78/0x12c
[    4.413473]  driver_probe_device+0x40/0x11c
[    4.413481]  __device_attach_driver+0xb8/0xf8
[    4.413489]  bus_for_each_drv+0x84/0xe4
[    4.413495]  __device_attach+0xfc/0x18c
[    4.413502]  device_initial_probe+0x14/0x20
[    4.413510]  bus_probe_device+0xb0/0xb4
[    4.413517]  deferred_probe_work_func+0x8c/0xc8
[    4.413524]  process_scheduled_works+0x250/0x658
[    4.413534]  worker_thread+0x15c/0x2c8
[    4.413542]  kthread+0x134/0x200
[    4.413550]  ret_from_fork+0x10/0x20

To fix this issue, ensure that the spinlock is only used after it has been
properly initialized before using it in ufshcd_setup_clocks().  Do that
unconditionally as initializing a spinlock is a fast operation.

Fixes: 209f4e43b8 ("scsi: ufs: core: Introduce a new clock_gating lock")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-2-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 16:53:00 -05:00
junan
d73a4bfa28 HID: usbkbd: Fix the bit shift number for LED_KANA
Since "LED_KANA" was defined as "0x04", the shift number should be "4".

Signed-off-by: junan <junan76@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-03 22:52:47 +01:00
Sai Teja Pottumuttu
206fa53fe1 drm/xe: Refactor max_remote_tiles
max_remote_tiles is more related to the platform than the GT IP. Thus
move it to platform descriptor from graphics descriptor. Note that the
FIXME is no more required, thus it can be dropped.

v2: Rebase
v3: Change the position of comment (MattR)

Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130085804.4136497-3-sai.teja.pottumuttu@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-02-03 13:52:45 -08:00
Sai Teja Pottumuttu
e4afdef605 drm/xe: Refactor dma_mask_size
dma_mask_size is more related to the platform than the GT IP. Thus
move it to platform descriptors.

v2:
 - Rebase

Signed-off-by: Sai Teja Pottumuttu <sai.teja.pottumuttu@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250130085804.4136497-2-sai.teja.pottumuttu@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
2025-02-03 13:52:45 -08:00
Charles Han
9b8e2220d3 HID: multitouch: Add NULL check in mt_input_configured
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.

Fixes: 4794394635 ("HID: multitouch: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-03 22:48:54 +01:00
Charles Han
45ab5166a8 HID: winwing: Add NULL check in winwing_init_led()
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in winwing_init_led() is not checked.
Add NULL check in winwing_init_led(), to handle kernel NULL
pointer dereference error.

Fixes: 266c990deb ("HID: Add WinWing Orion2 throttle support")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2025-02-03 22:47:32 +01:00
Tanya Agarwal
75eb39f2f5 selinux: fix spelling error
Fix spelling error in selinux module comments that were identified
using the codespell tool.
No functional changes - documentation only.

Signed-off-by: Tanya Agarwal <tanyaagarwal25699@gmail.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2025-02-03 16:47:20 -05:00
Linus Torvalds
0de63bb7d9 Fix a braino in d_revalidate series
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ6Ey3AAKCRBZ7Krx/gZQ
 61CzAP9fn68btv0R7pFJjbw5yAnrQHRDJ1i7PjI2NKLz05AwnQD/eD5oNakTbqMd
 LRCNb1awaEaEwnv4kf4vHEi9ykBEXQE=
 =0QhL
 -----END PGP SIGNATURE-----

Merge tag 'pull-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull d_revalidate fix from Al Viro:
 "Fix a braino in d_revalidate series: check ->d_op for NULL"

* tag 'pull-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix braino in "9p: fix ->rename_sem exclusion"
2025-02-03 13:39:55 -08:00
Martin K. Petersen
16b047c9a4 Merge branch '6.14/scsi-queue' into 6.14/scsi-fixes
Pull outstanding fixes bound for this release into 6.14/scsi-fixes.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-03 16:28:51 -05:00
Jakub Kicinski
0e6dc66b5c Merge branch 'maintainers-recognize-kuniyuki-iwashima-as-a-maintainer'
Jakub Kicinski says:

====================
MAINTAINERS: recognize Kuniyuki Iwashima as a maintainer

Kuniyuki Iwashima has been a prolific contributor and trusted reviewer
for some core portions of the networking stack for a couple of years now.
Formalize some obvious areas of his expertise and list him as a maintainer.
====================

Link: https://patch.msgid.link/20250202014728.1005003-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-03 13:27:53 -08:00
Jakub Kicinski
8a2e22f665 MAINTAINERS: add entry for UNIX sockets
Add a MAINTAINERS entry for UNIX socket, Kuniyuki has been
the de-facto maintainer of this code for a while.

Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-03 13:27:51 -08:00
Jakub Kicinski
ae0585b04a MAINTAINERS: add a general entry for BSD sockets
Create a MAINTAINERS entry for BSD sockets. List the top 3
reviewers as maintainers. The entry is meant to cover core
socket code (of which there isn't much) but also reviews
of any new socket families.

Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-03 13:27:50 -08:00
Jakub Kicinski
4d896b3539 MAINTAINERS: add Kuniyuki Iwashima to TCP reviewers
List Kuniyuki as an official TCP reviewer.

Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250202014728.1005003-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-03 13:27:50 -08:00
Jakub Kicinski
3a4e7193ec MAINTAINERS: list openvswitch docs under its entry
Submissions to the docs seem to not get properly CCed.

Acked-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20250202005024.964262-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-03 13:27:28 -08:00
Jakub Kicinski
88be092224 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
ice: fix Rx data path for heavy 9k MTU traffic

Maciej Fijalkowski says:

This patchset fixes a pretty nasty issue that was reported by RedHat
folks which occurred after ~30 minutes (this value varied, just trying
here to state that it was not observed immediately but rather after a
considerable longer amount of time) when ice driver was tortured with
jumbo frames via mix of iperf traffic executed simultaneously with
wrk/nginx on client/server sides (HTTP and TCP workloads basically).

The reported splats were spanning across all the bad things that can
happen to the state of page - refcount underflow, use-after-free, etc.
One of these looked as follows:

[ 2084.019891] BUG: Bad page state in process swapper/34  pfn:97fcd0
[ 2084.025990] page:00000000a60ee772 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x97fcd0
[ 2084.035462] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 2084.041990] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
[ 2084.049730] raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
[ 2084.057468] page dumped because: nonzero _refcount
[ 2084.062260] Modules linked in: bonding tls sunrpc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm mgag200 irqd
[ 2084.137829] CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Not tainted 5.14.0-427.37.1.el9_4.x86_64 #1
[ 2084.147039] Hardware name: Dell Inc. PowerEdge R750/0216NK, BIOS 1.13.2 12/19/2023
[ 2084.154604] Call Trace:
[ 2084.157058]  <IRQ>
[ 2084.159080]  dump_stack_lvl+0x34/0x48
[ 2084.162752]  bad_page.cold+0x63/0x94
[ 2084.166333]  check_new_pages+0xb3/0xe0
[ 2084.170083]  rmqueue_bulk+0x2d2/0x9e0
[ 2084.173749]  ? ktime_get+0x35/0xa0
[ 2084.177159]  rmqueue_pcplist+0x13b/0x210
[ 2084.181081]  rmqueue+0x7d3/0xd40
[ 2084.184316]  ? xas_load+0x9/0xa0
[ 2084.187547]  ? xas_find+0x183/0x1d0
[ 2084.191041]  ? xa_find_after+0xd0/0x130
[ 2084.194879]  ? intel_iommu_iotlb_sync_map+0x89/0xe0
[ 2084.199759]  get_page_from_freelist+0x11f/0x530
[ 2084.204291]  __alloc_pages+0xf2/0x250
[ 2084.207958]  ice_alloc_rx_bufs+0xcc/0x1c0 [ice]
[ 2084.212543]  ice_clean_rx_irq+0x631/0xa20 [ice]
[ 2084.217111]  ice_napi_poll+0xdf/0x2a0 [ice]
[ 2084.221330]  __napi_poll+0x27/0x170
[ 2084.224824]  net_rx_action+0x233/0x2f0
[ 2084.228575]  __do_softirq+0xc7/0x2ac
[ 2084.232155]  __irq_exit_rcu+0xa1/0xc0
[ 2084.235821]  common_interrupt+0x80/0xa0
[ 2084.239662]  </IRQ>
[ 2084.241768]  <TASK>

The fix is mostly about reverting what was done in commit 1dc1a7e7f4
("ice: Centrallize Rx buffer recycling") followed by proper timing on
page_count() storage and then removing the ice_rx_buf::act related logic
(which was mostly introduced for purposes from cited commit).

Special thanks to Xu Du for providing reproducer and Jacob Keller for
initial extensive analysis.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: stop storing XDP verdict within ice_rx_buf
  ice: gather page_count()'s of each frag right before XDP prog call
  ice: put Rx buffers after being done with current frame
====================

Link: https://patch.msgid.link/20250131185415.3741532-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-03 13:18:44 -08:00
Al Viro
902e09c8ac fix braino in "9p: fix ->rename_sem exclusion"
->d_op can bloody well be NULL

Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 30d61efe11 "9p: fix ->rename_sem exclusion"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2025-02-03 16:16:09 -05:00
Andy Shevchenko
1ddee69108 pinctrl: cy8c95x0: Respect IRQ trigger settings from firmware
Some of the platforms may connect the INT pin via inversion logic
effectively make the triggering to be active-low.
Remove explicit trigger flag to respect the settings from firmware.

Without this change even idling chip produces spurious interrupts
and kernel disables the line in the result:

  irq 33: nobody cared (try booting with the "irqpoll" option)
  CPU: 0 UID: 0 PID: 125 Comm: irq/33-i2c-INT3 Not tainted 6.12.0-00236-g8b874ed11dae #64
  Hardware name: Intel Corp. QUARK/Galileo, BIOS 0x01000900 01/01/2014
  ...
  handlers:
  [<86e86bea>] irq_default_primary_handler threaded [<d153e44a>] cy8c95x0_irq_handler [pinctrl_cy8c95x0]
  Disabling IRQ #33

Fixes: e6cbbe4294 ("pinctrl: Add Cypress cy8c95x0 support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250117142304.596106-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2025-02-03 21:51:35 +01:00
Thomas Weißschuh
c1f4a7a840 selftests/nolibc: always keep test kernel configuration up to date
Avoid using a stale test kernel configuration by always synchronizing
it to the current source tree.
kbuild is smart enough to avoid spurious rebuilds.

Shuffle the code around a bit to keep all the commands with side-effects
together.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-config-v2-5-5701c35995d6@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 21:02:16 +01:00
Thomas Weißschuh
d7d271ec30 selftests/nolibc: execute defconfig before other targets
Some targets use the test kernel configuration.
Executing defconfig in the same make invocation as those targets results
in errors as the configuration may be in an inconsistent state during
reconfiguration.
Avoid this by introducing ordering dependencies between the defconfig
and some other targets.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-config-v2-4-5701c35995d6@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 21:02:15 +01:00
Thomas Weißschuh
25d5ef9e7c selftests/nolibc: drop call to mrproper target
"mrproper" unnecessarily cleans a lot of files.
kbuild is smart enough to handle changed configurations,
so the cleanup is not necessary and only leads to excessive rebuilds.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-config-v2-3-5701c35995d6@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 21:02:13 +01:00
Thomas Weißschuh
a75b763b51 selftests/nolibc: drop call to prepare target
The "prepare" target does not need to be run manually.
kbuild knows when to use it on its own and the target is not even
documented.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-config-v2-2-5701c35995d6@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 21:02:02 +01:00
Thomas Weißschuh
e16214dc1f selftests/nolibc: drop mips32be EXTRACONFIG
kbuild already contains logic to merge predefines snippets into a
defconfig file. For MIPS a snippet for big-endian is already provided.

Link: https://lore.kernel.org/r/20250123-nolibc-config-v2-1-5701c35995d6@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 21:01:32 +01:00
Thomas Weißschuh
cfb1bfe953 tools/nolibc: make signature of ioctl() more flexible
POSIX defines the signature of ioctl() as follows,
to allow passing a pointer or integer without casting:
	int ioctl(int fildes, int request, ... /* arg */);

Nolibc ioctl() expects a pointer, forcing the user to manually cast.
Using va_arg to make the signature more flexible would work but seems to
prevent inlining of the function. Instead use a macro. "fd" and "req"
will still be typechecked through sys_ioctl().

Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 20:57:39 +01:00
Thomas Weißschuh
4da4e35e9d selftests/nolibc: enable -Wmissing-prototypes
User code may want to use this compiler flag.
Make sure it is supported by nolibc.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-prototype-v1-3-e1afc5c1999a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 20:57:39 +01:00
Thomas Weißschuh
69ccba67d7 selftests/nolibc: ignore -Wmissing-prototypes
To make sure nolibc itself is compatible with -Wmissing-prototypes the
compiler flag should be enabled when building nolibc-test.
However some of its functions are non-static to ease debugging [0],
triggering the compiler warning.

Disable the warning inside nolibc-test while still enabling it for
nolibc itself.

[0] https://lore.kernel.org/lkml/ZMjM0UPRAqoC+goY@1wt.eu/

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-prototype-v1-2-e1afc5c1999a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 20:57:38 +01:00
Thomas Weißschuh
0de64754a5 tools/nolibc: add prototypes for non-static functions
With -Wmissing-prototypes the compiler will warn about non-static
functions which don't have a prototype defined.
This warning doesn't make much sense for nolibc itself but for user code
it is still useful.
To pacify the compiler add prototypes next to the function definitions,
similar to how it is handled elsewhere in the kernel.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-prototype-v1-1-e1afc5c1999a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-03 20:57:37 +01:00
Daniele Ceraolo Spurio
492f8d2030 drm/xe/pxp: Enable PXP for MTL and LNL
Now that are the pieces are there, we can turn the feature on.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-14-daniele.ceraolospurio@intel.com
2025-02-03 11:51:30 -08:00
Daniele Ceraolo Spurio
385a8015b2 drm/xe/pxp: Add PXP debugfs support
This patch introduces 2 PXP debugfs entries:

- info: prints the current PXP status and key instance
- terminate: simulate a termination interrupt

The first one is useful for debug, while the second one can be used for
testing the termination flow.

v2: move the info prints inside the lock (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-13-daniele.ceraolospurio@intel.com
2025-02-03 11:51:28 -08:00