The HW suspend flow kills all PXP HWDRM sessions, so we need to mark all
the queues and BOs as invalid and do a full termination when PXP is next
used.
v2: rebase
v3: rebase on new status flow, defer termination to next PXP use as it
makes things much easier and allows us to use the same function for all
types of suspend.
v4: fix the documentation of the suspend function (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-12-daniele.ceraolospurio@intel.com
The driver needs to know if a BO is encrypted with PXP to enable the
display decryption at flip time.
Furthermore, we want to keep track of the status of the encryption and
reject any operation that involves a BO that is encrypted using an old
key. There are two points in time where such checks can kick in:
1 - at VM bind time, all operations except for unmapping will be
rejected if the key used to encrypt the BO is no longer valid. This
check is opt-in via a new VM_BIND flag, to avoid a scenario where a
malicious app purposely shares an invalid BO with a non-PXP aware
app (such as a compositor). If the VM_BIND was failed, the
compositor would be unable to display anything at all. Allowing the
bind to go through means that output still works, it just displays
garbage data within the bounds of the illegal BO.
2 - at job submission time, if the queue is marked as using PXP, all
objects bound to the VM will be checked and the submission will be
rejected if any of them was encrypted with a key that is no longer
valid.
Note that there is no risk of leaking the encrypted data if a user does
not opt-in to those checks; the only consequence is that the user will
not realize that the encryption key is changed and that the data is no
longer valid.
v2: Better commnnts and descriptions (John), rebase
v3: Properly return the result of key_assign up the stack, do not use
xe_bo in display headers (Jani)
v4: improve key_instance variable documentation (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-11-daniele.ceraolospurio@intel.com
PXP prerequisites (SW proxy and HuC auth via GSC) are completed
asynchronously from driver load, which means that userspace can start
submitting before we're ready to start a PXP session. Therefore, we need
a query that userspace can use to check not only if PXP is supported but
also to wait until the prerequisites are done.
v2: Improve doc, do not report TYPE_NONE as supported (José)
v3: Better comments, remove unneeded copy_from_user (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-10-daniele.ceraolospurio@intel.com
Userspace is required to mark a queue as using PXP to guarantee that the
PXP instructions will work. In addition to managing the PXP sessions,
when a PXP queue is created the driver will set the relevant bits in
its context control register.
On submission of a valid PXP queue, the driver will validate all
encrypted objects mapped to the VM to ensured they were encrypted with
the current key.
v2: Remove pxp_types include outside of PXP code (Jani), better comments
and code cleanup (John)
v3: split the internal PXP management to a separate patch for ease of
review. re-order ioctl checks to always return -EINVAL if parameters are
invalid, rebase on msix changes.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-9-daniele.ceraolospurio@intel.com
We expect every queue that uses PXP to be marked as doing so, to allow
the driver to correctly manage the encryption status. The API for doing
this from userspace is coming in the next patch, while this patch
implement the management side of things. When a PXP queue is created,
the driver will do the following:
- Start the default PXP session if it is not already running;
- assign an rpm ref to the queue to keep for its lifetime (this is
required because PXP HWDRM sessions are killed by the HW suspend flow).
Since PXP start and termination can race each other, this patch also
introduces locking and a state machine to keep track of the pending
operations. Note that since we'll need to take the lock from the
suspend/resume paths as well, we can't do submissions while holding it,
which means we need a slightly more complicated state machine to keep
track of intermediate steps.
v4: new patch in the series, split from the following interface patch to
keep review manageable. Lock and status rework to not do submissions
under lock.
v5: Improve comments and error logs (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-8-daniele.ceraolospurio@intel.com
A session is initialized (i.e. started) by sending a message to the GSC.
The initialization will be triggered when a user opts-in to using PXP;
the interface for that is coming in a follow-up patch in the series.
v2: clean up error messages, use new ARB define (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-7-daniele.ceraolospurio@intel.com
When something happen to the session, the HW generates a termination
interrupt. In reply to this, the driver is required to submit an inline
session termination via the VCS, trigger the global termination and
notify the GSC FW that the session is now invalid.
v2: rename ARB define to make it cleaner to move it to uapi (John)
v3: fix parameter name in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-6-daniele.ceraolospurio@intel.com
After a session is terminated, we need to inform the GSC so that it can
clean up its side of the allocation. This is done by sending an
invalidation command with the session ID.
The invalidation will be triggered in response to a termination,
interrupt, whose handling is coming in the next patch in the series.
v2: Better comment and error messages (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-5-daniele.ceraolospurio@intel.com
The key termination is done with a specific submission to the VCS
engine. This flow will be triggered in response to a termination
interrupt, whose handling is coming in a follow-up patch in the series.
v2: clean up defines and command emission code. (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-4-daniele.ceraolospurio@intel.com
PXP requires submissions to the HW for the following operations
1) Key invalidation, done via the VCS engine
2) Communication with the GSC FW for session management, done via the
GSCCS.
Key invalidation submissions are serialized (only 1 termination can be
serviced at a given time) and done via GGTT, so we can allocate a simple
BO and a kernel queue for it.
Submissions for session management are tied to a PXP client (identified
by a unique host_session_id); from the GSC POV this is a user-accessible
construct, so all related submission must be done via PPGTT. The driver
does not currently support PPGTT submission from within the kernel, so
to add this support, the following changes have been included:
- a new type of kernel-owned VM (marked as GSC), required to ensure we
don't use fault mode on the engine and to mark the different lock
usage with lockdep.
- a new function to map a BO into a VM from within the kernel.
v2: improve comments and function name, remove unneeded include (John)
v3: fix variable/function names in documentation
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-3-daniele.ceraolospurio@intel.com
As the first step towards adding PXP support, hook in the PXP init
function, allocate the PXP structure and initialize the KCR register to
allow PXP HWDRM sessions.
v2: remove unneeded includes, free PXP memory on error (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129174140.948829-2-daniele.ceraolospurio@intel.com
Fix make dt_binding_check warning:
DTC [C] Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb
.../adc/adi,axi-adc.example.dtb: adc@0: pwm-names: ['convst1'] is too short
from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#
Add "minItems" to pwm-names, it allows to use one single pwm when
connected to both adc conversion inputs.
Fixes: 7c2357b104 ("dt-bindings: iio: adc: ad7606: Add iio backend bindings")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250129-wip-bl-ad7606_add_backend_sw_mode-v3-1-c3aec77c0ab7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Clear reset status flag, to keep error status register clean after reset
(ad3552r manual, rev B table 38).
Reset error flag was left to 1, so debugging registers, the "Error
Status Register" was dirty (0x01). It is important to clear this bit, so
if there is any reset event over normal working mode, it is possible to
detect it.
Fixes: 8f2b54824b ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250125-wip-bl-ad3552r-clear-reset-v2-1-aa3a27f3ff8c@baylibre.com
Cc: <Stable@vger..kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Channel configuration doesn't work as expected.
For FIELD_PREP the bit mask is needed and not the bit number.
Fixes: 874bbd1219 ("iio: adc: ad7192: Use bitfield access macros")
Signed-off-by: Markus Burri <markus.burri@mt.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250124150703.97848-1-markus.burri@mt.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the driver was originally created, it was decided that
sampling_frequency and hysteresis would be shared_per_type instead
of shared_by_all (even though it is internally shared by all). Eg:
in_proximity_raw
in_proximity_sampling_frequency
When we introduced support for more channels, we continued with
shared_by_type which. Eg:
in_proximity0_raw
in_proximity1_raw
in_proximity_sampling_frequency
in_attention_raw
in_attention_sampling_frequency
Ideally we should change to shared_by_all, but it is not an option,
because the current naming has been a stablished ABI by now. Luckily we
can use separate instead. That will be more consistent:
in_proximity0_raw
in_proximity0_sampling_frequency
in_proximity1_raw
in_proximity1_sampling_frequency
in_attention_raw
in_attention_sampling_frequency
Fixes: 596ef5cf65 ("iio: hid-sensor-prox: Add support for more channels")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20241216-fix-hid-sensor-v2-1-ff8c1959ec4a@chromium.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The number of valid bits in SAMA7G5 ADC channel data register are 16.
Hence changing the realbits value to 16
Fixes: 840bf6cb98 ("iio: adc: at91-sama5d2_adc: add support for sama7g5 device")
Signed-off-by: Nayab Sayed <nayabbasha.sayed@microchip.com>
Link: https://patch.msgid.link/20250115-fix-sama7g5-adc-realbits-v2-1-58a6e4087584@microchip.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This patch moves ACPI_FREE() in pac1921_match_acpi_device()
in order to cover all branches.
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 9fdf1d0333 ("iio: adc: pac1921: Add ACPI support to Microchip pac1921")
Acked-by: Matteo Martelli <matteomartelli3@gmail.com>
Signed-off-by: Victor Duicu <victor.duicu@microchip.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20250117065314.4431-1-victor.duicu@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The two provided max_scale_nano values must be multiplied by 100 and 10
respectively to achieve nano units. According to the comments:
Max scale for apds0306 is 16.326432 → the fractional part is 0.326432,
which is 326432000 in NANO. The current value is 3264320.
Max scale for apds0306-065 is 14.09721 → the fractional part is 0.09712,
which is 97120000 in NANO. The current value is 9712000.
Update max_scale_nano initialization to use the right NANO fractional
parts.
Cc: stable@vger.kernel.org
Fixes: 620d1e6c7a ("iio: light: Add support for APDS9306 Light Sensor")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Tested-by: subhajit.ghosh@tweaklogic.com
Link: https://patch.msgid.link/20250112-apds9306_nano_vals-v1-1-82fb145d0b16@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Batch sequential write transfers up to the max TX size (40 bytes).
This controller must specify a max transfer size of only 8 bytes for
RX operations.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/20250131200158.732898-1-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change suggested from the AXI HDL team, modify the function
axi_dac_data_stream_enable() to check for interface busy, to avoid
possible issues when starting the stream.
Fixes: e61d717842 ("iio: dac: adi-axi-dac: extend features")
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Link: https://patch.msgid.link/20250114-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v4-3-979402e33545@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make available scale building more clear. This hurts the performance
quite a bit by looping throgh the scales many times instead of doing
everything in one loop. It however simplifies logic by:
- decoupling the gain and scale allocations & computations
- keeping the temporary 'per_time_gains' table inside the
per_time_scales computation function.
- separating building the 'all scales' table in own function and doing
it based on the already computed per-time scales.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: subhajit.ghosh@tweaklogic.com
Link: https://patch.msgid.link/Z1_rRXqdhxhL6wBw@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
According to Documentation/timers/delay_sleep_functions.rst,
fsleep() is the preferred delay function to be used in non-atomic
context, so switch to it accordingly.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20241209181624.1260868-1-festevam@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a custom implementation of regmap read/write callbacks using the SPI
bus. This allows them to be performed at a lower SCLK rate than data
reads. Previously, all SPI transfers were being performed at a lower
speed, but with this change sample data is read at the max bus speed
while the register reads/writes remain at the lower rate.
Also remove .can_multi_write from the AD4695 driver's regmap_configs, as
this isn't implemented or needed.
For some background context, see:
https://lore.kernel.org/linux-iio/20241028163907.00007e12@Huawei.com/
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Tested-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241113-tgamblin-ad4695_improvements-v2-3-b6bb7c758fc4@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Ensure that conversion mode is successfully exited when the command is
issued by adding an extra transfer beforehand, matching the minimum CNV
high and low times from the AD4695 datasheet. The AD4695 has a quirk
where the exit command only works during a conversion, so guarantee this
happens by triggering a conversion in ad4695_exit_conversion_mode().
Then make this even more robust by ensuring that the exit command is run
at AD4695_REG_ACCESS_SCLK_HZ rather than the bus maximum.
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Tested-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241113-tgamblin-ad4695_improvements-v2-2-b6bb7c758fc4@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This change integrates mc3510c support into the mc3230 driver.
MC3510C uses the same registers as MC3230, but a different value scale.
Tested on Huawei MediaPad T3 10 (huawei-agassi)
Signed-off-by: Vasiliy Doylov <nekodevelopper@gmail.com>
Link: https://patch.msgid.link/20250116-mainlining-mc3510c-v4-5-a41308b85ec2@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor code to support multiple generations of MCUBE devices by
defining name, chip id and product code in mc3230_chip_info struct.
Signed-off-by: Vasiliy Doylov <nekodevelopper@gmail.com>
Link: https://patch.msgid.link/20250116-mainlining-mc3510c-v4-4-a41308b85ec2@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MC3510C is a 3 asix digital accelerometer. It handled by the same
driver as MC3230. Document it as a trivial device.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vasiliy Doylov <nekodevelopper@gmail.com>
Link: https://patch.msgid.link/20250116-mainlining-mc3510c-v4-1-a41308b85ec2@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250114192716.912476-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7625 driver was submitted under a dual BSD/GPL license, but this
isn't a requirement for the code, and adds extra complexity. To make it
consistent with similar drivers, drop the BSD tag and leave it as
GPL-2.0-only.
Suggested-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://patch.msgid.link/20250114-ad7625_license-v1-1-6555b7be05ab@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use two separate static const struct ad_sigma_delta_info instances
instead of making a copy for each driver instance.
Typically in the IIO subsystem, we use multiple static const instances
of the same struct when there are different variants of the same family
of devices as opposed to making a copy for each driver instance and
modifying it.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250113-iio-adc-ad7313-fix-non-const-info-struct-v4-2-b63be3ecac4a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move the call to fwnode_irq_get_byname() from the driver-specific
ad7173_fw_parse_device_config() to the shared ad_sd_init() function.
The main reason for this is that we want struct ad_sigma_delta_info to
be static const data that describes the actual ADC chip, not the
application-specific configuration or any runtime state.
Previously, this struct was being used to pass the IRQ number to the
shared ad_sd_init() function. Now, this is replaced by a boolean flag
that is set at compile time and the ad_sd_init() function handles
looking up the IRQ number instead. This also has the added benefit that
if any other drivers need to make use of this in the future, they just
have to set the flag and the shared code will take care of the rest
rather than duplicating the code in each driver.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250113-iio-adc-ad7313-fix-non-const-info-struct-v4-1-b63be3ecac4a@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There's no reason to check for regulator supply property presence before
calling devm_regulator_get_optional() as that will return -ENODEV if
the supply is not present.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20250109182325.3973684-2-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250107125848.226899-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a section for alert support, explaining how user can use iio events
attributes to enable alert and set thresholds.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20250108-ad7380-add-alert-support-v4-5-1751802471ba@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The alert functionality is an out of range indicator and can be used as
an early indicator of an out of bounds conversion result.
ALERT_LOW_THRESHOLD and ALERT_HIGH_THRESHOLD registers are common to all
channels.
When using 1 SDO line (only mode supported by the driver right now), i.e
data outputs only on SDOA, SDOB (or SDOD for 4 channels variants) is
used as an alert pin. The alert pin is updated at the end of the
conversion (set to low if an alert occurs) and is cleared on a falling
edge of CS.
The ALERT register contains information about the exact alert status:
channel and direction. ALERT register can be accessed using debugfs if
enabled.
User can set high/low thresholds and enable alert detection using the
regular iio events attributes:
events/in_thresh_falling_value events/in_thresh_rising_value
events/thresh_either_en
In most use cases, user will hardwire the alert pin to trigger a shutdown.
In theory, we could generate userspace IIO events for alerts, but this
is not implemented yet for several reasons [1]. This can be implemented
later if a real use case actually requires it.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
[1] https://lore.kernel.org/all/4be16272-5197-4fa1-918c-c4cdfcaee02e@baylibre.com/
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250108-ad7380-add-alert-support-v4-4-1751802471ba@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since regmap cache is now enabled, we don't need to store the
oversampling ratio in the private data structure.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20250108-ad7380-add-alert-support-v4-3-1751802471ba@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Conditionnal scoped handlers are turning out to be a real pain:
readability issues, compiler and linker handling issues among others so
rollback and remove the scoped version of iio_dvice_claim_direct_mode.
To impove code readability factorize code to set oversampling ratio.
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Link: https://patch.msgid.link/20250108-ad7380-add-alert-support-v4-1-1751802471ba@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
current-speed description has been added to uartlite description by commit
3de536a8c3 ("dt-bindings: serial: uartlite: Add properties for
synthesis-time parameters") that's why no reason to have in xilinx.txt too.
Fixes: 3de536a8c3 ("dt-bindings: serial: uartlite: Add properties for synthesis-time parameters")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/aa0b7f9a851c6b8d11f37050f84e0ec69cfa72a2.1738600116.git.michal.simek@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Fix incorrect format of compatible string (comma instead of hyphen) for
TI's AM62A7 SoC.
s/ti,am62a7,dss/ti,am62a7-dss
Fixes: 7959ceb767 ("dt-bindings: display: ti: Add support for am62a7 dss")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250203155431.2174170-1-devarsht@ti.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Fully migrate parisc to the IO functions from lib/iomem_copy.c. In a
recent patch the functions memset_io and memcpy_toio were removed, but
the memcpy_fromio was kept, because for very short sequences it does
half word accesses, whereas the functions in lib/iomem_copy.c do byte
accesses until the memory is naturally aligned and then do machine word
accesses. But I don't think the single half-word access merits keeping
the arch specific implementation, so, remove it as well.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Mutliple lines in the file contain tabs in lines where there is no
code. Just remove them.
Signed-off-by: Julian Vetter <julian@outer-limits.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Commit 70fb86a85d ("drm/xe: Revert some changes that break a mesa
debug tool") partially reverted some changes to workaround breakage
caused to mesa tools. However, in doing so it also broke fetching the
GuC log via debugfs since xe_print_blob_ascii85() simply bails out.
The fix is to avoid the extra newlines: the devcoredump interface is
line-oriented and adding random newlines in the middle breaks it. If a
tool is able to parse it by looking at the data and checking for chars
that are out of the ascii85 space, it can still do so. A format change
that breaks the line-oriented output on devcoredump however needs better
coordination with existing tools.
v2: Add suffix description comment
v3: Reword explanation of xe_print_blob_ascii85() calling drm_puts()
in a loop
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Fixes: 70fb86a85d ("drm/xe: Revert some changes that break a mesa debug tool")
Fixes: ec1455ce7e ("drm/xe/devcoredump: Add ASCII85 dump helper function")
Link: https://patchwork.freedesktop.org/patch/msgid/20250123202307.95103-2-jose.souza@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2c95bbf500)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>