Commit graph

1,403,262 commits

Author SHA1 Message Date
Yangyu Chen
21bef40ad1 riscv: defconfig: enable SpacemiT SoC
Enable SpacemiT SoC config in defconfig to allow the default upstream
kernel booting on Banana Pi BPI-F3 board.

Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jesse Taube <jesse@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:52 +08:00
Yangyu Chen
d60d57ab6b riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
Banana Pi BPI-F3 [1] is a industrial grade RISC-V development board, it
design with SpacemiT K1 8 core RISC-V chip [2].

Currently only support booting into console with only uart enabled,
other features will be added soon later.

Link: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 [1]
Link: https://www.spacemit.com/en/spacemit-key-stone-2/ [2]
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Jesse Taube <jesse@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:52 +08:00
Yangyu Chen
d8fe646919 riscv: dts: add initial SpacemiT K1 SoC device tree
Banana Pi BPI-F3 motherboard is powered by SpacemiT K1[1].

Key features:
- 4 cores per cluster, 2 clusters on chip
- UART IP is Intel XScale UART

Some key considerations:
- ISA string is inferred from vendor documentation[2]
- Cluster topology is inferred from datasheet[1] and L2 in vendor dts[3]
- No coherent DMA on this board
    Inferred by taking vendor ethernet and MMC drivers to the mainline
    kernel. Without dma-noncoherent in soc node, the driver fails.
- Add cache nodes
    K1 SoC has 128 sets of 32KiB L1 I/D Cache for each hart, and 512 sets
    of 512KiB L2 Cache for each cluster.

Currently only support booting into console with only uart, other
features will be added soon later.

Link: https://docs.banana-pi.org/en/BPI-F3/SpacemiT_K1_datasheet [1]
Link: https://developer.spacemit.com/#/documentation?token=BWbGwbx7liGW21kq9lucSA6Vnpb [2]
Link: https://gitee.com/bianbu-linux/linux-6.1/blob/bl-v1.0.y/arch/riscv/boot/dts/spacemit/k1-x.dtsi [3]
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Jesse Taube <jesse@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:52 +08:00
Yangyu Chen
8814aa123a riscv: add SpacemiT SoC family Kconfig support
The first SoC in the SpacemiT series is K1, which contains 8 RISC-V
cores with RISC-V Vector v1.0 support.

Link: https://www.spacemit.com/en/spacemit-key-stone-2/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:51 +08:00
Yixun Lan
dfe6d083ed dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
Found SpacemiT's K1 uart controller is compatible with
Intel's Xscale uart, but it's still worth to introduce a new compatible.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:51 +08:00
Yangyu Chen
562272a287 dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
Add compatible string for SpacemiT K1 PLIC.

Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:51 +08:00
Yangyu Chen
e5164af2a2 dt-bindings: timer: Add SpacemiT K1 CLINT
Add compatible string for SpacemiT K1 CLINT.

Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:50 +08:00
Yangyu Chen
244fe889b9 dt-bindings: riscv: add SpacemiT K1 bindings
Add DT binding documentation for the SpacemiT K1 SoC[1] and the Banana
Pi BPi-F3 board[2] which used it.

Link: https://www.spacemit.com/en/spacemit-key-stone-2/ [1]
Link: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 [2]
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:50 +08:00
Yangyu Chen
16c9147e6a dt-bindings: riscv: Add SpacemiT X60 compatibles
The X60 is RISC-V CPU cores from SpacemiT and currently used in their K1
SoC.

Link: https://www.spacemit.com/en/spacemit-x60-core/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:50 +08:00
Yixun Lan
6055c764fc MAINTAINERS: setup support for SpacemiT SoC tree
Add myself as maintainer of SpacemiT's SoC tree, which
suggested by Conor [1].

Link: https://lore.kernel.org/all/20241018234615-GYA2124001@gentoo/ [1]
Signed-off-by: Yixun Lan <dlan@gentoo.org>
2025-01-17 07:53:50 +08:00
Pu Lehui
556a399406 selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
When redirecting the split BTF to the vmlinux base BTF, we need to mark
the distilled base struct/union members of split BTF structs/unions in
id_map with BTF_IS_EMBEDDED. This indicates that these types must match
both name and size later. So if a needed composite type, which is the
member of composite type in the split BTF, has a different size in the
base BTF we wish to relocate with, btf__relocate() should error out.

Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115100241.4171581-4-pulehui@huaweicloud.com
2025-01-16 15:34:18 -08:00
Pu Lehui
5ca681a86e libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
When redirecting the split BTF to the vmlinux base BTF, we need to mark
the distilled base struct/union members of split BTF structs/unions in
id_map with BTF_IS_EMBEDDED. This indicates that these types must match
both name and size later. Therefore, we need to traverse the entire
split BTF, which involves traversing type IDs from nr_dist_base_types to
nr_types. However, the current implementation uses an incorrect
traversal end type ID, so let's correct it.

Fixes: 19e00c897d ("libbpf: Split BTF relocation")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115100241.4171581-3-pulehui@huaweicloud.com
2025-01-16 15:34:18 -08:00
Pu Lehui
5436a54332 libbpf: Fix return zero when elf_begin failed
The error number of elf_begin is omitted when encapsulating the
btf_find_elf_sections function.

Fixes: c86f180ffc ("libbpf: Make btf_parse_elf process .BTF.base transparently")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115100241.4171581-2-pulehui@huaweicloud.com
2025-01-16 15:34:18 -08:00
Pu Lehui
4a04cb326a selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
Fix btf leak on new btf alloc failure in btf_distill test.

Fixes: affdeb5061 ("selftests/bpf: Extend distilled BTF tests to cover BTF relocation")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115100241.4171581-1-pulehui@huaweicloud.com
2025-01-16 15:34:18 -08:00
Eduard Zingerman
7c311b7cb3 veristat: Load struct_ops programs only once
libbpf automatically adjusts autoload for struct_ops programs,
see libbpf.c:bpf_object_adjust_struct_ops_autoload.

For example, if there is a map:

    SEC(".struct_ops.link")
    struct sched_ext_ops ops = {
    	.enqueue = foo,
        .tick = bar,
    };

Both 'foo' and 'bar' would be loaded if 'ops' autocreate is true,
both 'foo' and 'bar' would be skipped if 'ops' autocreate is false.

This means that when veristat processes object file with 'ops',
it would load 4 programs in total: two programs per each
'process_prog' call.

The adjustment occurs at object load time, and libbpf remembers
association between 'ops' and 'foo'/'bar' at object open time.
The only way to persuade libbpf to load one of two is to adjust map
initial value, such that only one program is referenced.
This patch does exactly that, significantly reducing time to process
object files with big number of struct_ops programs.

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250115223835.919989-1-eddyz87@gmail.com
2025-01-16 15:33:58 -08:00
Tony Ambardar
a8d1c48d07 selftests/bpf: Fix undefined UINT_MAX in veristat.c
Include <limits.h> in 'veristat.c' to provide a UINT_MAX definition and
avoid multiple compile errors against mips64el/musl-libc:

veristat.c: In function 'max_verifier_log_size':
veristat.c:1135:36: error: 'UINT_MAX' undeclared (first use in this function)
 1135 |         const int SMALL_LOG_SIZE = UINT_MAX >> 8;
      |                                    ^~~~~~~~
veristat.c:24:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
   23 | #include <math.h>
  +++ |+#include <limits.h>
   24 |

Fixes: 1f7c336307 ("selftests/bpf: Increase verifier log limit in veristat")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250116075036.3459898-1-tony.ambardar@gmail.com
2025-01-16 15:20:21 -08:00
Dnyaneshwar Bhadane
3630a47b70 drm/i915/cx0_phy: Update HDMI TMDS C20 algorithm value
In the C20 algorithm for HDMI TMDS, certain fields have been updated
in the BSpec to set values for SRAM_GENERIC_<A/B>_TX_CNTX_CFG_1,
such as tx_misc and dac_ctrl_range for Xe2LPD, Xe2HPD and MTL/ARL.
This patch covers fields that need to be set based on the platform type.

Some ARLs SoCs cannot be directly distinguished by their GMD version Id,
Specifically to set value of tx_misc, so PCI Host Bridge IDs are used
for differentiation.

v2:
- Relocate defines and Restructure the code(Jani)

v3:
- Replace conditions with display.platform.<platform> (jani)
- Move host bridge check to new function (Jani)

v4:
- Identify/Replace arrowlake_u as meteorlake_u(Jani)

Bspec:74165,74491
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217201301.3593054-3-dnyaneshwar.bhadane@intel.com
2025-01-16 15:05:36 -08:00
Dnyaneshwar Bhadane
e35ecd95ec drm/i915/display: Add MTL subplatforms definition
Separate MTL-U platform PCI ids in one define macro.

Add the MTL U/ARL U as subplatform member in MTL platform description
structure to use display.platform.<platform> from intel_display
structure instead of IS_<PLATFORM>() in display code path.

v2:
- Club ARL-u in MTL and identify ARL-u as MTL-u subplatform(Jani)

Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217201301.3593054-2-dnyaneshwar.bhadane@intel.com
2025-01-16 15:05:14 -08:00
Dave Airlie
cfaf51adaf Merge tag 'drm-intel-fixes-2025-01-15' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Relax clear color alignment to 64 bytes [fb] (Ville Syrjälä)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4fdIVf68qsqIpiN@linux
2025-01-17 08:48:12 +10:00
Bo Gan
d7f12857f0 clk: analogbits: Fix incorrect calculation of vco rate delta
In wrpll_configure_for_rate() we try to determine the best PLL
configuration for a target rate. However, in the loop where we try
values of R, we should compare the derived `vco` with `target_vco_rate`.
However, we were in fact comparing it with `target_rate`, which is
actually after Q shift. This is incorrect, and sometimes can result in
suboptimal clock rates. Fix it.

Fixes: 7b9487a9a5 ("clk: analogbits: add Wide-Range PLL library")
Signed-off-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240830061639.2316-1-ganboing@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16 13:43:49 -08:00
Dmitry Vyukov
8b4799e4f0 perf hist: Fix bogus profiles when filters are enabled
When a filtered column is not present in the sort order, profiles become
arbitrary broken. Filtered and non-filtered entries are collapsed
together, and the filtered-by field ends up with a random value (either
from a filtered or non-filtered entry). If we end up with filtered
entry/value, then the whole collapsed entry will be filtered out and will
be missing in the profile. If we end up with non-filtered entry/value,
then the overhead value will be wrongly larger (include some subset
of filtered out samples).

This leads to very confusing profiles. The problem is hard to notice,
and if noticed hard to understand. If the filter is for a single value,
then it can be fixed by adding the corresponding field to the sort order
(provided user understood the problem). But if the filter is for multiple
values, it's impossible to fix b/c there is no concept of binary sorting
based on filter predicate (we want to group all non-filtered values in
one bucket, and all filtered values in another).

Examples of affected commands:
perf report --tid=123
perf report --sort overhead,symbol --comm=foo,bar

Fix this by considering filtered status as the highest priority
sort/collapse predicate.

As a side effect this effectively adds a new feature of showing profile
where several lines are combined based on arbitrary filtering predicate.
For example, showing symbols from binaries foo and bar combined together,
but not from other binaries; or showing combined overhead of several
particular threads.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/359dc444ce94d20e59d3a9e360c36fbeac833a04.1736927981.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-01-16 13:43:28 -08:00
Dmitry Vyukov
cd57c04c38 perf hist: Deduplicate cmp/sort/collapse code
Application of cmp/sort/collapse fmt callbacks is duplicated 6 times.
Factor it into a common helper function. NFC.

Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/84c4b55614e24a344f86ae0db62e8fa8f251f874.1736927981.git.dvyukov@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-01-16 13:43:28 -08:00
Jens Axboe
63492a2d7e Merge tag 'md-6.14-20250116' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-6.14/block
Pull MD fix from Song.

* tag 'md-6.14-20250116' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
  md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
2025-01-16 14:42:37 -07:00
Pierre-Loup A. Griffais
92600f3295 Input: xpad - add QH Electronics VID/PID
Add support for QH Electronics Xbox 360-compatible controller

Signed-off-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250116012518.3476735-1-vi@endrift.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2025-01-16 13:35:54 -08:00
Maxime Ripard
e7d0b02395 clk: bcm: rpi: Add disp clock
BCM2712 has an extra clock exposed by the firmware called DISP, and used
by (at least) the HVS. Let's add it to the list of clocks to register in
Linux.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-5-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16 13:27:12 -08:00
Maxime Ripard
4af2cfc2cc clk: bcm: rpi: Create helper to retrieve private data
The RaspberryPi firmware clocks driver uses in several instances a
container_of to retrieve the struct raspberrypi_clk_data from a pointer
to struct clk_hw. Let's create a small function to avoid duplicating it
all over the place.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-4-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16 13:27:12 -08:00
Dom Cobley
4d85abb0fb clk: bcm: rpi: Enable minimize for all firmware clocks
There isn't a reason not to minimise the clocks, and it saves
some power.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-3-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16 13:27:11 -08:00
Dom Cobley
c911a66059 clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
For performance/power it is beneficial to adjust gpu clocks with arm clock.
This is how the downstream cpufreq driver works

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-2-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16 13:27:11 -08:00
Dom Cobley
410cf8252e clk: bcm: rpi: Add ISP to exported clocks
The ISP clock can be controlled by the driver, so register it
with the clock subsystem.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20250116-bcm2712-clk-updates-v1-1-10bc92ffbf41@raspberrypi.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-16 13:27:11 -08:00
Konrad Knitter
1de25c6b98 ice: support FW Recovery Mode
Recovery Mode is intended to recover from a fatal failure scenario in
which the device is not accessible to the host, meaning the firmware is
non-responsive.

The purpose of the Firmware Recovery Mode is to enable software tools to
update firmware and/or device configuration so the fatal error can be
resolved.

Recovery Mode Firmware supports a limited set of admin commands required
for NVM update.
Recovery Firmware does not support hardware interrupts so a polling mode
is used.

The driver will expose only the minimum set of devlink commands required
for the recovery of the adapter.

Using an appropriate NVM image, the user can recover the adapter using
the devlink flash API.

Prior to 4.20 E810 Adapter Recovery Firmware supports only the update
and erase of the "fw.mgmt" component.

E810 Adapter Recovery Firmware doesn't support selected preservation of
cards settings or identifiers.

The following command can be used to recover the adapter:

$ devlink dev flash <pci-address> <update-image.bin> component fw.mgmt
  overwrite settings overwrite identifier

Newer FW versions (4.20 or newer) supports update of "fw.undi" and
"fw.netlist" components.

$ devlink dev flash <pci-address> <update-image.bin>

Tested on Intel Corporation Ethernet Controller E810-C for SFP
FW revision 3.20 and 4.30.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-16 13:05:06 -08:00
Konrad Knitter
0502bd2e06 devlink: add devl guard
Add devl guard for scoped_guard().

Example usage:

scoped_guard(devl, priv_to_devlink(pf)) {
	err = init_devlink(pf);
	if (err)
		return err;
}

Co-developed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-16 13:04:58 -08:00
Konrad Knitter
d4679b79ff pldmfw: enable selected component update
This patch enables to update a selected component from PLDM image
containing multiple components.

Example usage:

struct pldmfw;
data.mode = PLDMFW_UPDATE_MODE_SINGLE_COMPONENT;
data.compontent_identifier = DRIVER_FW_MGMT_COMPONENT_ID;

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Konrad Knitter <konrad.knitter@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-16 13:04:41 -08:00
Nicolin Chen
3f4818ec13 iommufd/fault: Destroy response and mutex in iommufd_fault_destroy()
Both were missing in the initial patch.

Fixes: 07838f7fd5 ("iommufd: Add iommufd fault object")
Link: https://patch.msgid.link/r/bc8bb13e215af27e62ee51bdba3648dd4ed2dce3.1736923732.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2025-01-16 16:40:33 -04:00
Krzysztof Kozlowski
ad9afd7503 PCI: dra7xx: Use syscon_regmap_lookup_by_phandle_args
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument.  Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.

There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data.  Dtschema and Devicetree bindings offer the
static/build-time check for this already.

Link: https://lore.kernel.org/r/20250112-syscon-phandle-args-pci-v1-1-fcb6ebcc0afc@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2025-01-16 14:38:53 -06:00
Krzysztof Kozlowski
149fc35734 PCI: layerscape: Use syscon_regmap_lookup_by_phandle_args
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument.  Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.

Link: https://lore.kernel.org/r/20250112-syscon-phandle-args-pci-v1-2-fcb6ebcc0afc@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Roy Zang <Roy.Zang@nxp.com>
2025-01-16 14:38:36 -06:00
Richard Zhu
6dd24b0a85 PCI: imx6: Remove surplus imx7d_pcie_init_phy() function
This function essentially duplicates imx7d_pcie_enable_ref_clk(). So remove
it.

Link: https://lore.kernel.org/r/20241126075702.4099164-8-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16 14:29:38 -06:00
Richard Zhu
93d883f890 PCI: imx6: Add missing reference clock disable logic
Ensure the *_enable_ref_clk() function is symmetric by addressing missing
disable parts on some platforms.

Fixes: d0a75c791f ("PCI: imx6: Factor out ref clock disable to match enable")
Link: https://lore.kernel.org/r/20241126075702.4099164-7-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16 14:29:38 -06:00
Richard Zhu
ef61c7d8d0 PCI: imx6: Deassert apps_reset in imx_pcie_deassert_core_reset()
Since the apps_reset is asserted in imx_pcie_assert_core_reset(), it should
be deasserted in imx_pcie_deassert_core_reset().

Fixes: 9b3fe6796d ("PCI: imx6: Add code to support i.MX7D")
Link: https://lore.kernel.org/r/20241126075702.4099164-6-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16 14:29:38 -06:00
Richard Zhu
f068ffdd03 PCI: imx6: Skip controller_id generation logic for i.MX7D
The i.MX7D only has one PCIe controller, so controller_id should always be
0. The previous code is incorrect although yielding the correct result.

Fix by removing "IMX7D" from the switch case branch.

Fixes: 2d8ed461db ("PCI: imx6: Add support for i.MX8MQ")
Link: https://lore.kernel.org/r/20241126075702.4099164-5-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16 14:29:29 -06:00
Richard Zhu
7ab93e6a08 PCI: imx6: Fetch dbi2 and iATU base addesses from DT
Since dw_pcie_get_resources() gets the dbi2 and iATU base addresses from
DT, remove the code from the imx6 driver that does the same.

Upstream DTSes have not enabled Endpoint function. So nothing is broken for
old upstream DTBs.

Link: https://lore.kernel.org/r/20241126075702.4099164-4-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-16 14:22:07 -06:00
Frank Li
de22e20589 PCI: imx6: Configure PHY based on Root Complex or Endpoint mode
Pass PHY_MODE_PCIE_EP if the PCI controller operates in Endpoint (EP) mode,
and fix the Root Complex (RC) mode being hardcoded using a drvdata mode
check.

Fixes: 8026f2d8e8 ("PCI: imx6: Call common PHY API to set mode, speed, and submode")
Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-6-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
2025-01-16 14:21:53 -06:00
Richard Zhu
137250911f PCI: imx6: Add Refclk for i.MX95 PCIe
Add "ref" clock to enable Refclk. To avoid breaking DT backwards
compatibility, the i.MX95 "ref" clock is optional. Use
devm_clk_get_optional() to fetch i.MX95 PCIe optional clocks in driver.

If using external clock, "ref" clock should point to external reference.

If using internal clock, CREF_EN in LAST_TO_REG controls reference output,
implemented in drivers/clk/imx/clk-imx95-blk-ctl.c.

Link: https://lore.kernel.org/r/20241126075702.4099164-3-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
2025-01-16 14:20:37 -06:00
Richard Zhu
d4627402bd dt-bindings: PCI: fsl,imx6q-pcie: Add Refclk for i.MX95 RC
Previous Refclk of i.MX95 PCIe RC is on when system boot to kernel. But
boot firmware change the behavior, it is off when boot. So it must be
turned on when it is used. Also it needs be turned off/on for suspend and
resume.

Add one Refclk for i.MX95 PCIe RC. Increase clocks' maxItems to 5 and keep
the same restriction with other compatible string.

Link: https://lore.kernel.org/r/20241126075702.4099164-2-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-01-16 14:18:24 -06:00
Frank Li
687aedb73a PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support
Add support for the i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe
Endpoint (EP). On the i.MX8Q platforms, the PCI bus addresses differ
from the CPU addresses. However, the DesignWare (DWC) driver already
handles this in the common code.

Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-7-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2025-01-16 14:18:14 -06:00
Frank Li
3d2207256a dt-bindings: PCI: fsl,imx6q-pcie-ep: Add compatible string fsl,imx8q-pcie-ep
Add new compatible string fsl,imx8q-pcie-ep for iMX8Q.

The 'reg-names' property only needs 'dbi' and 'addr_space' because the
others are located at a default offset. The new 'clock-names' property
aligns with the Root Complex (RC) naming.

Link: https://lore.kernel.org/r/20241119-pci_fixup_addr-v8-5-c4bfa5193288@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
2025-01-16 14:18:03 -06:00
Marcel Hamer
68abd0c4eb wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
On removal of the device or unloading of the kernel module a potential NULL
pointer dereference occurs.

The following sequence deletes the interface:

  brcmf_detach()
    brcmf_remove_interface()
      brcmf_del_if()

Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to
BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches.

After brcmf_remove_interface() call the brcmf_proto_detach() function is
called providing the following sequence:

  brcmf_detach()
    brcmf_proto_detach()
      brcmf_proto_msgbuf_detach()
        brcmf_flowring_detach()
          brcmf_msgbuf_delete_flowring()
            brcmf_msgbuf_remove_flowring()
              brcmf_flowring_delete()
                brcmf_get_ifp()
                brcmf_txfinalize()

Since brcmf_get_ip() can and actually will return NULL in this case the
call to brcmf_txfinalize() will result in a NULL pointer dereference inside
brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors.

This will only happen if a flowring still has an skb.

Although the NULL pointer dereference has only been seen when trying to
update the tx statistic, all other uses of the ifp pointer have been
guarded as well with an early return if ifp is NULL.

Cc: stable@vger.kernel.org
Signed-off-by: Marcel Hamer <marcel.hamer@windriver.com>
Link: https://lore.kernel.org/all/b519e746-ddfd-421f-d897-7620d229e4b2@gmail.com/
Acked-by: Arend van Spriel  <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116132240.731039-1-marcel.hamer@windriver.com
2025-01-16 21:26:30 +02:00
Ping-Ke Shih
b4bfbc50b1 wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
When using allmodconfig, .config has CONFIG_LEDS_CLASS=m but
autoconf.h has CONFIG_LEDS_CLASS_MODULE (additional suffix _MODULE)
instead of CONFIG_LEDS_CLASS, which condition CONFIG_LEDS_CLASS in
rtw88/led.h can't work properly.

Add RTW88_LEDS to Kconfig, and use it as condition to fix this problem.

drivers/net/wireless/realtek/rtw88/led.c:19:6: error: redefinition of 'rtw_led_init'
   19 | void rtw_led_init(struct rtw_dev *rtwdev)
      |      ^~~~~~~~~~~~
In file included from drivers/net/wireless/realtek/rtw88/led.c:7:
drivers/net/wireless/realtek/rtw88/led.h:15:20: note: previous definition of 'rtw_led_init' with type 'void(struct rtw_dev *)'
   15 | static inline void rtw_led_init(struct rtw_dev *rtwdev)
      |                    ^~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/led.c:64:6: error: redefinition of 'rtw_led_deinit'
   64 | void rtw_led_deinit(struct rtw_dev *rtwdev)
      |      ^~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/led.h:19:20: note: previous definition of 'rtw_led_deinit' with type 'void(struct rtw_dev *)'
   19 | static inline void rtw_led_deinit(struct rtw_dev *rtwdev)
      |                    ^~~~~~~~~~~~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-wireless/e19a87ad9cd54bfa9907f3a043b25d30@realtek.com/T/#me407832de1040ce22e53517bcb18e322ad0e2260
Fixes: 4b6652bc6d ("wifi: rtw88: Add support for LED blinking")
Cc: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250116120424.13174-1-pkshih@realtek.com
2025-01-16 21:26:05 +02:00
Chen Linxuan
41fb0fabc4 erofs: return SHRINK_EMPTY if no objects to free
Comments in file include/linux/shrinker.h says that
`count_objects` of `struct shrinker` should return SHRINK_EMPTY
when there are no objects to free.

> If there are no objects to free, it should return SHRINK_EMPTY,
> while 0 is returned in cases of the number of freeable items cannot
> be determined or shrinker should skip this cache for this time
> (e.g., their number is below shrinkable limit).

Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/149E6E64B5B6B5E8+20250116083303.199817-1-chenlinxuan@uniontech.com
[ Gao Xiang: should have no impact since it's not memcg-aware. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2025-01-17 03:24:30 +08:00
Gao Xiang
e180b8c4c2 erofs: convert z_erofs_bind_cache() to folios
The managed cache uses a pseudo inode to keep (necessary) compressed
data.

Currently, it still uses zero-order folios, so this is just a trivial
conversion, except that the use of the pagepool is temporarily dropped.

Drop some obsoleted comments too.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250114034429.431408-4-hsiangkao@linux.alibaba.com
2025-01-17 03:22:59 +08:00
Gao Xiang
6f435e94a1 erofs: tidy up zdata.c
All small code style adjustments, no logic changes:

 - z_erofs_decompress_frontend => z_erofs_frontend;
 - z_erofs_decompress_backend => z_erofs_backend;
 - Use Z_EROFS_DEFINE_FRONTEND() to replace DECOMPRESS_FRONTEND_INIT();
 - `nr_folios` should be `nrpages` in z_erofs_readahead();
 - Refine in-line comments.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250114034429.431408-3-hsiangkao@linux.alibaba.com
2025-01-17 03:22:43 +08:00