Commit graph

1,403,262 commits

Author SHA1 Message Date
Jarkko Nikula
30bb1ce712 i3c: mipi-i3c-hci: Add support for MIPI I3C HCI on PCI bus
Add a glue code for the MIPI I3C HCI on PCI bus with Intel Panther Lake
I3C controller PCI IDs.

MIPI I3C HCI on Intel platforms has additional logic around the MIPI I3C
HCI core logic. Those together create so called I3C slice on PCI bus.
Intel specific initialization code does a reset cycle to the I3C slice
before probing the MIPI I3C HCI part.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20241231115904.620052-2-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-01-12 23:54:39 +01:00
Jarkko Nikula
ccdb2e0e3b i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming
MIPI I3C HCI on Intel hardware requires a quirk where ring needs to stop
and set to run again after resuming the halted controller. This is not
expected from the MIPI I3C HCI specification and is Intel specific.

Add this quirk to generic aborted transfer handling and execute it only
when ring is not in running state after a transfer error and attempted
controller resume. This is the case on Intel hardware.

It is not fully clear to me what is the ring running state in generic
hardware in such case. I would expect if ring is not running, then stop
request is a no-op and run request is either required or does the same
what controller resume would do.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20241231115904.620052-1-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-01-12 23:54:39 +01:00
Jean-Michel Hautbois
a0a8306c82 m68k: coldfire: Use proper clock rate for timers
The DMA and PIT timers are clocked at fsys/2. Fix it.
While at it, fix the comment naming for DMA timers (duplicated tmr.2).

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
2025-01-13 08:51:07 +10:00
Wolfram Sang
0d2c022ffa i3c: fix kdoc parameter description for module_i3c_i2c_driver()
A typo mentioned I3C when it should have been I2C.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219220338.10315-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-01-12 23:49:23 +01:00
Pei Xiao
b75439c945 i3c: dw: Fix use-after-free in dw_i3c_master driver due to race condition
In dw_i3c_common_probe, &master->hj_work is bound with
dw_i3c_hj_work. And dw_i3c_master_irq_handler can call
dw_i3c_master_irq_handle_ibis function to start the work.

If we remove the module which will call dw_i3c_common_remove to
make cleanup, it will free master->base through i3c_master_unregister
while the work mentioned above will be used. The sequence of operations
that may lead to a UAF bug is as follows:

CPU0                                      CPU1

                                     | dw_i3c_hj_work
dw_i3c_common_remove                 |
i3c_master_unregister(&master->base) |
device_unregister(&master->dev)      |
device_release                       |
//free master->base                  |
                                     | i3c_master_do_daa(&master->base)
                                     | //use master->base

Fix it by ensuring that the work is canceled before proceeding with
the cleanup in dw_i3c_common_remove.

Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/bfc49c9527be5b513e7ceafeba314ca40a5be4bc.1732703537.git.xiaopei01@kylinos.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2025-01-12 23:48:47 +01:00
Linus Torvalds
5bc55a333a Linux 6.13-rc7 v6.13-rc7 2025-01-12 14:37:56 -08:00
Linus Torvalds
0cbe10470b Char/Misc/IIO driver fixes for 6.13-rc7
Here are a bunch of small IIO and interconnect and other driver fixes
 for 6.13-rc7 to resolve reported issues.  Included in here are:
   - loads of iio driver fixes as a result of an audit of places where
     uninitialized data would leak to userspace.
   - other smaller, and normal, iio driver fixes.
   - mhi driver fix
   - interconnect driver fixes
   - pci1xxxx driver fix
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PK3g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymClACgyFB9Ce/jlUWUKvX1eCY9xWVMrmwAoMe0nrLG
 a2lNOpIQM5K+P7iGz4cT
 =Yq71
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc/IIO driver fixes from Greg KH:
 "Here are a bunch of small IIO and interconnect and other driver fixes
  to resolve reported issues. Included in here are:

   - loads of iio driver fixes as a result of an audit of places where
    uninitialized data would leak to userspace.

   - other smaller, and normal, iio driver fixes.

   - mhi driver fix

   - interconnect driver fixes

   - pci1xxxx driver fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (32 commits)
  misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set config
  misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling
  interconnect: icc-clk: check return values of devm_kasprintf()
  interconnect: qcom: icc-rpm: Set the count member before accessing the flex array
  iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
  iio: temperature: tmp006: fix information leak in triggered buffer
  iio: inkern: call iio_device_put() only on mapped devices
  iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
  iio: adc: at91: call input_free_device() on allocated iio_dev
  iio: adc: ad7173: fix using shared static info struct
  iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
  iio: adc: ti-ads1119: fix information leak in triggered buffer
  iio: pressure: zpa2326: fix information leak in triggered buffer
  iio: adc: rockchip_saradc: fix information leak in triggered buffer
  iio: imu: kmx61: fix information leak in triggered buffer
  iio: light: vcnl4035: fix information leak in triggered buffer
  iio: light: bh1745: fix information leak in triggered buffer
  iio: adc: ti-ads8688: fix information leak in triggered buffer
  iio: dummy: iio_simply_dummy_buffer: fix information leak in triggered buffer
  iio: test: Fix GTS test config
  ...
2025-01-12 14:34:00 -08:00
Linus Torvalds
083f9fac67 Driver core and debugfs fixes for 6.13-rc7
Here are some small driver core and debugfs fixes for 6.13-rc7 that
 resolve some reported problems:
   - debugfs runtime error reporting fixes
   - topology cpumask race-condition fix
   - MAINTAINERS file email update
 
 All of these have been in linux-next this week with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PLEA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynA9gCeJBLQ3bq6Gmmikx3iNEYFwl7mym8An3uKRXPQ
 F7WBfhPwR7n+vVwbSqAj
 =cEAK
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and debugfs fixes from Greg KH:
 "Here are some small driver core and debugfs fixes that resolve some
  reported problems:

   - debugfs runtime error reporting fixes

   - topology cpumask race-condition fix

   - MAINTAINERS file email update

  All of these have been in linux-next this week with no reported
  issues"

* tag 'driver-core-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  fs: debugfs: fix open proxy for unsafe files
  MAINTAINERS: align Danilo's maintainer entries
  topology: Keep the cpumask unchanged when printing cpumap
  debugfs: fix missing mutex_destroy() in short_fops case
  fs: debugfs: differentiate short fops with proxy ops
2025-01-12 14:26:31 -08:00
Linus Torvalds
91fff6fa94 Staging driver fixes for 6.13-rc7
Here are some small staging driver fixes that resolve some reported
 issues and have been in my tree for too long due to the holiday break.
 They resolve the following issues:
   - lots of gpib build-time fixes as reported by testers and 0-day
   - gpib logical fixes
   - mailmap fix (already in your tree, but git merge should handle it.)
 
 All of these have been in linux-next for a while, with no reported
 issues other than the duplicated change.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PLTg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yknEACfRy/G6h1DvC9/9WqQA9aWIJLKwcgAn03Rz2Pm
 86aUV6HmW1Vh7Ypfbsv+
 =6dRm
 -----END PGP SIGNATURE-----

Merge tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes that resolve some reported
  issues and have been in my tree for too long due to the holiday break.
  They resolve the following issues:

   - lots of gpib build-time fixes as reported by testers and 0-day

   - gpib logical fixes

   - mailmap fix

  All of these have been in linux-next for a while, with no reported
  issues other than the duplicated change"

* tag 'staging-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: gpib: mite: remove unused global functions
  staging: gpib: refer to correct config symbol in tnt4882 Makefile
  mailmap: update Bingwu Zhang's email address
  staging: gpib: fix address space mixup
  staging: gpib: use ioport_map
  staging: gpib: fix pcmcia dependencies
  staging: gpib: add module author and description fields
  staging: gpib: fix Makefiles
  staging: gpib: make global 'usec_diff' functions static
  staging: gpib: Modify mismatched function name
  staging: gpib: Add lower bound check for secondary address
  staging: gpib: Fix erroneous removal of blank before newline
2025-01-12 14:22:13 -08:00
Francis Pravin
4a324970fa nvme-pci: use correct size to free the hmb buffer
dev->host_mem_size value is updated only after the successful buffer
allocation of hmb descriptor. Otherwise, it may have some undefined value.
So, use the correct size to free the hmb buffer when the hmb descriptor
buffer allocation failed.

Signed-off-by: Francis Pravin <francis.p@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-01-12 14:11:29 -08:00
Keisuke Nishimura
d4a95adeab nvme: Add error path for xa_store in nvme_init_effects
The xa_store() may fail due to memory allocation failure because there
is no guarantee that the index NVME_CSI_NVM is already used. This fix
introduces a new function to handle the error path.

Fixes: cc115cbe12 ("nvme: always initialize known command effects")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-01-12 14:11:29 -08:00
Baruch Siach
e4a0a3058d nvme-pci: fix comment typo
envent -> event.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-01-12 14:11:29 -08:00
Dave Airlie
255e094a30 Merge tag 'drm-intel-gt-next-2025-01-10' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:

- More robust engine resets on Haswell and older (Nitin)

- Dead code removal (David)
- Selftest, logging and tracing improvements (Sk, Nitin, Sebastian,
  Apoorva)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4DidoEACFu7D6iG@jlahtine-mobl.ger.corp.intel.com
2025-01-13 08:05:00 +10:00
Rob Herring (Arm)
6e5773d52f of/address: Fix WARN when attempting translating non-translatable addresses
The recently added WARN() for deprecated #address-cells and #size-cells
triggered a WARN when of_platform_populate() (which calls
of_address_to_resource()) is used on nodes with non-translatable
addresses. This case is expected to return an error.

Rework the bus matching to allow no match and make the default require
an #address-cells property. That should be safe to do as any platform
missing #address-cells would have a warning already.

Fixes: 045b14ca5c ("of: WARN on deprecated #address-cells/#size-cells handling")
Tested-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://lore.kernel.org/r/20250110215030.3637845-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-12 15:31:47 -06:00
Rob Herring (Arm)
44748065ed of/unittest: Add test that of_address_to_resource() fails on non-translatable address
of_address_to_resource() on a non-translatable address should return an
error. Additionally, this case also triggers a spurious WARN for
missing #address-cells/#size-cells.

Link: https://lore.kernel.org/r/20250110215030.3637845-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-12 15:31:47 -06:00
Linus Torvalds
4bd9e3b4c5 Serial driver fixes for 6.13-rc7
Here are 3 small serial driver fixes tree.  They resolve some reported
 issues:
   - stm32 break control fix
   - 8250 runtime pm usage counter fix
   - imx driver locking fix.
 
 All have been in my tree and linux-next for 3 weeks now, with no
 reported issues:
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PLgQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yn4CgCg2grVo/DXCMTPNPfA3IgxnJngCzIAoMIYTEAs
 754uq2E3qLijW/FbLuKa
 =3Cgn
 -----END PGP SIGNATURE-----

Merge tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull serial driver fixes from Greg KH:
 "Here are three small serial driver fixes tree. They resolve some
  reported issues:

   - stm32 break control fix

   - 8250 runtime pm usage counter fix

   - imx driver locking fix

  All have been in my tree and linux-next for three weeks now, with no
  reported issues"

* tag 'tty-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: stm32: use port lock wrappers for break control
  serial: imx: Use uart_port_lock_irq() instead of uart_port_lock()
  tty: serial: 8250: Fix another runtime PM usage counter underflow
2025-01-12 13:27:15 -08:00
Linus Torvalds
196856db7c USB fixes for 6.13-rc7
Here are some small USB driver fixes and new device ids for 6.13-rc7.
 Included in here are:
   - usb serial new device ids
   - typec bugfixes for reported issues
   - dwc3 driver fixes
   - chipidea driver fixes
   - gadget driver fixes
   - other minor fixes for reported problems.
 
 All of these have been in linux-next for a while, with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ4PLvw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylwBACgzaEeezzORCot4IG4EZS7WJ6ViQsAnjPSno04
 F3JzZwPuZ+xkWbAo+wGk
 =uUiH
 -----END PGP SIGNATURE-----

Merge tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB driver fixes and new device ids for 6.13-rc7.
  Included in here are:

   - usb serial new device ids

   - typec bugfixes for reported issues

   - dwc3 driver fixes

   - chipidea driver fixes

   - gadget driver fixes

   - other minor fixes for reported problems.

  All of these have been in linux-next for a while, with no reported
  issues"

* tag 'usb-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add Neoway N723-EA support
  USB: serial: option: add MeiG Smart SRM815
  USB: serial: cp210x: add Phoenix Contact UPS Device
  usb: typec: fix pm usage counter imbalance in ucsi_ccg_sync_control()
  usb-storage: Add max sectors quirk for Nokia 208
  usb: gadget: midi2: Reverse-select at the right place
  usb: gadget: f_fs: Remove WARN_ON in functionfs_bind
  USB: core: Disable LPM only for non-suspended ports
  usb: fix reference leak in usb_new_device()
  usb: typec: tcpci: fix NULL pointer issue on shared irq case
  usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null
  usb: chipidea: ci_hdrc_imx: decrement device's refcount in .remove() and in the error path of .probe()
  usb: typec: ucsi: Set orientation as none when connector is unplugged
  usb: gadget: configfs: Ignore trailing LF for user strings to cdev
  USB: usblp: return error when setting unsupported protocol
  usb: gadget: f_uac2: Fix incorrect setting of bNumEndpoints
  usb: typec: tcpm/tcpci_maxim: fix error code in max_contaminant_read_resistance_kohm()
  usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property
  usb: dwc3-am62: Disable autosuspend during remove
  usb: dwc3: gadget: fix writing NYET threshold
2025-01-12 13:09:00 -08:00
Linus Torvalds
be54864552 s390:
* fix a latent bug when the kernel is compiled in debug mode
 
 * two small UCONTROL fixes and their selftests
 
 arm64:
 
 * always check page state in hyp_ack_unshare()
 
 * align set_id_regs selftest with the fact that ASIDBITS field is RO
 
 * various vPMU fixes for bugs that only affect nested virt
 
 PPC e500:
 
 * Fix a mostly impossible (but just wrong) case where IRQs were
   never re-enabled
 
 * Observe host permissions instead of mapping readonly host pages as
   guest-writable.  This fixes a NULL-pointer dereference in 6.13
 
 * Replace brittle VMA-based attempts at building huge shadow TLB entries
   with PTE lookups.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmeDrZkUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMX/wf/VPTDn+T0EcWBduH+hJ/g0uxM0TqM
 vHmoL8sXrH9yVrqcdlOVXDc9R6h7q44cuOM/ZPBZuR4QAJqcL7b9KDDQWyOphzQt
 U6rKDbnDZyEAC5Ti586qncKGoEv7vgL2LOVW5MUyyYzyWAKmNs2HNSIQkKmDEPiQ
 KXWMhtncC3x+TbesbwMxwE/F94M7PFVynaoODH/dY8C7ZsPykIBRuUz4WSE/411b
 Dy8TOYyesPg4pCT8YASHCt8PIwwBUXpEUfhEqElOGM4I3rOfWXFe1w1VyizXLyO5
 lULZ3zfP6+jlWxbz9Nyvb5rSRJO8a6PfmqhsbFavGQau0u/3AR2cLTA92w==
 =UpHe
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "The largest part here is for KVM/PPC, where a NULL pointer dereference
  was introduced in the 6.13 merge window and is now fixed.

  There's some "holiday-induced lateness", as the s390 submaintainer put
  it, but otherwise things looks fine.

  s390:

   - fix a latent bug when the kernel is compiled in debug mode

   - two small UCONTROL fixes and their selftests

  arm64:

   - always check page state in hyp_ack_unshare()

   - align set_id_regs selftest with the fact that ASIDBITS field is RO

   - various vPMU fixes for bugs that only affect nested virt

  PPC e500:

   - Fix a mostly impossible (but just wrong) case where IRQs were never
     re-enabled

   - Observe host permissions instead of mapping readonly host pages as
     guest-writable. This fixes a NULL-pointer dereference in 6.13

   - Replace brittle VMA-based attempts at building huge shadow TLB
     entries with PTE lookups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: e500: perform hugepage check after looking up the PFN
  KVM: e500: map readonly host pages for read
  KVM: e500: track host-writability of pages
  KVM: e500: use shadow TLB entry as witness for writability
  KVM: e500: always restore irqs
  KVM: s390: selftests: Add has device attr check to uc_attr_mem_limit selftest
  KVM: s390: selftests: Add ucontrol gis routing test
  KVM: s390: Reject KVM_SET_GSI_ROUTING on ucontrol VMs
  KVM: s390: selftests: Add ucontrol flic attr selftests
  KVM: s390: Reject setting flic pfault attributes on ucontrol VMs
  KVM: s390: vsie: fix virtual/physical address in unpin_scb()
  KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
  KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
  KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
  KVM: arm64: Add unified helper for reprogramming counters by mask
  KVM: arm64: Always check the state from hyp_ack_unshare()
  KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
2025-01-12 12:04:53 -08:00
Linus Torvalds
a603abe345 - Fix a #GP in the perf user callchain code caused by a race between uprobe
freeing the task and the bpf profiler unwinding the task's user stack
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmeDphkACgkQEsHwGGHe
 VUrFjxAAickP9S3nlduOzjOO9Pa85MUbQ5wgzrpa29KV75xez9w7IWmambBbYkrY
 zxV/vJqVEjuaJki/kqgtPNmp7tHjDBwW/sTqSI8TTeIwogfht4WPPA2YEHR2pDK4
 t8XNEHGnP38o1oJ6j+zLO9vktieJ/T65yZurmGwVfmGpNOIHNBSzCFopGFCXV41k
 WcNi1E3dOgSbAQESvF+J1ZtkcmBXovoyE7k+H5bbuRcoyFF1RhIDvKcGGY5m7FDo
 Cb92wJTbm9kQaWdOc8oa808pyVtmh0wy+1I9dvoQ+sPlhLzy4p32uOpWUlJkpV51
 lZgPO0NunnLlHNL4zK4M7OBphlEbr8JaXQbgDLtn8TnfPKlh1sZ0DWoVcyXqB77g
 cOlsSEDYzSbf/5TKDZMfeh4koEZvtNmDH6SjUYxC6bdfpfd8D5zp8TbvPJ6XmM8m
 tFn4rhTY5rf2+AjgZs16jkpNlDk+pmwXiczxhldMR/U9y5meea96pe+r8HPpQk27
 1t9N0ixt+EhY1xkITYkS06UV/nJJzejbtrCytkh/FLePQCSi+IbgpxUASVHnJSur
 4ctWZTm+1CxZ7SRZ9VEsPYXfRfRtJjPKOqheQR2RNRi9SnBi7AlJfMOffEZqj8/p
 q8C2qtwOlBdxo/t87NnTsvmZE3mfWJBgN2KmO/5YsshRx15qPis=
 =oobp
 -----END PGP SIGNATURE-----

Merge tag 'perf_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fix from Borislav Petkov:

 - Fix a #GP in the perf user callchain code caused by a race between
   uprobe freeing the task and the bpf profiler unwinding the task's
   user stack

* tag 'perf_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  uprobes: Fix race in uprobe_free_utask
2025-01-12 11:57:45 -08:00
Linus Torvalds
f31acaef55 - Check whether shadow stack is active before using the ptrace regset getter
- Remove a wrong BUG_ON in the early static call code which breaks Xen PVH
   when booting as dom0
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmeDpCEACgkQEsHwGGHe
 VUriexAAgI+uUA8YuyTbX9vFiqbu1lijWiNc9uC+2lqiXAz4gEZ8pA6JlxCR+qIx
 rO5u9wB889NOp8NGmeicEH6vt3eEKN8kSNO3tCE1qBVzrcsJtTqp92kMq0PPom5u
 EDhxCFwWIvkcarxt7E0tQI1jkRraI1repwXAFBkIjifr4FzXQ+BsoVpY9CFoKQtl
 HhWtLzCpyVK9T8WbzJ3SQ3mzykk7MRdvoobIrKMYSgeFUxzCmTM1eMY5zMkKHwIF
 SmfjpboJFqWrjxTLvU+7McrcFnTuy3sNOERZIquksGfPd8UDdB2xCdZqXKpvYHnW
 e6+NBPPO9Ht3zIRQKRz+/+oxX83zj0t8iGyBti/lUms33FBL00WhVl8IXT3xt+au
 lkdL5jVEmnqcOKQsRUGZB+dmm8W9bcEETijx42O0pODrvhE/vOb+AC/n9Wo1ArrP
 6JuZ7V1A/mU6Cjrij5IrXcj4TBJbDbRxPR2i+jGdb58DgqwwRBNEaFEmm/Cr0aZx
 eoSxgTzT6ZrBs/+duffHWb8ALrM4JUJd/9StORpwDNmBj9FA7Gqig2MkDfbQweeg
 4s5RT1AYHwTTbmnS3GELmUnkyTREdexzu3gXYovR+xAK/3zqBccvESnLRPS2Z7oA
 6AwfhyI5k/8A8oyafeXwQCOZTOxJmwmuDzCizyGc1k+aYDxCp4Q=
 =d+mX
 -----END PGP SIGNATURE-----

Merge tag 'x86_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:

 - Check whether shadow stack is active before using the ptrace regset
   getter

 - Remove a wrong BUG_ON in the early static call code which breaks Xen
   PVH when booting as dom0

* tag 'x86_urgent_for_v6.13_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Ensure shadow stack is active before "getting" registers
  x86/static-call: Remove early_boot_irqs_disabled check to fix Xen PVH dom0
2025-01-12 11:55:48 -08:00
Krzysztof Kozlowski
3a48b38f48 fbdev: omapfb: Use syscon_regmap_lookup_by_phandle_args
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument.  Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.

There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data.  Dtschema and Devicetree bindings offer the
static/build-time check for this already.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2025-01-12 18:12:35 +01:00
Krzysztof Kozlowski
65ea3b4d38 fbdev: omapfb: Use of_property_present() to test existence of DT property
of_property_read_bool() should be used only on boolean properties.

Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2025-01-12 18:12:34 +01:00
Thorsten Blum
ed3f274b86 fbdev: sm501fb: Use str_enabled_disabled() helper in sm501fb_init_fb()
Remove hard-coded strings by using the str_enabled_disabled() helper
function.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Helge Deller <deller@gmx.de>
2025-01-12 18:10:01 +01:00
Thorsten Blum
74a2594a27 hwmon: (asus_atk0110) Use str_enabled_disabled() and str_enable_disable() helpers
Remove hard-coded strings by using the str_enabled_disabled() and
str_enable_disable() helper functions.

Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250112105128.86653-2-thorsten.blum@linux.dev
[groeck: Fixed subject and continuation line alignments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-12 08:46:23 -08:00
Joel Stanley
c8571eab11 hwmon: Fix help text for aspeed-g6-pwm-tach
The help text has the wrong module name mentioned, and the capitalisation
of the title is inconsistent.

Fixes: 7e1449cd15 ("hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20250110114737.64035-1-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-12 08:46:23 -08:00
Angelo Dureghello
012b8276f0 iio: dac: ad3552r-hs: clear reset status flag
Clear reset status flag, to keep error status register
clean after reset (ad3552r manual, rev B table 38).

Reset error flag was left to 1, so debugging registers, the
"Error Status Register" was dirty (0x01). It is important
to clear this bit, so if there is any reset event over normal
working mode, it is possible to detect it.

Fixes: 0b4d9fe58b ("iio: dac: ad3552r: add high-speed platform driver")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250108-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v2-2-2dac02f04638@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-01-12 13:36:01 +00:00
Angelo Dureghello
1e758b6132 iio: dac: ad3552r-common: fix ad3541/2r ranges
Fix ad3541/2r voltage ranges to be as per ad3542r datasheet,
rev. C, table 38 (page 57).

The wrong ad354xr ranges was generating erroneous Vpp output.

In more details:
- fix wrong number of ranges, they are 5 ranges, not 6,
- remove non-existent 0-3V range,
- adjust order, since ad3552r_find_range() get a wrong index,
  producing a wrong Vpp as output.

Retested all the ranges on real hardware, EVALAD3542RFMCZ:

adi,output-range-microvolt (fdt):
<(000000) (2500000)>;   ok (Rfbx1, switch 10)
<(000000) (5000000)>;   ok (Rfbx1, switch 10)
<(000000) (10000000)>;  ok (Rfbx1, switch 10)
<(-5000000) (5000000)>; ok (Rfbx2, switch +/- 5)
<(-2500000) (7500000)>; ok (Rfbx2, switch -2.5/7.5)

Fixes: 8f2b54824b ("drivers:iio:dac: Add AD3552R driver support")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250108-wip-bl-ad3552r-axi-v0-iio-testing-carlos-v2-1-2dac02f04638@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-01-12 13:35:06 +00:00
Dan Carpenter
20eb1fae41 iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
The bme680_read_temp() function takes a pointer to s16 but we're passing
an int pointer to it.  This will not work on big endian systems and it
also means that the other 16 bits are uninitialized.

Pass an s16 type variable.

Fixes: f51171ce22 ("iio: chemical: bme680: Add SCALE and RAW channels")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/4addb68c-853a-49fc-8d40-739e78db5fa1@stanley.mountain
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-01-12 13:12:48 +00:00
Greg Kroah-Hartman
44cefdf1cc MHI Host
========
 
 - Free the "img_info::mhi_buf" in the error path of mhi_alloc_bhie_table() to
   avoid memory leak.
 
 - Add support for Qualcomm X100 5G RAN Accelerator card with relevant channel
   and event config.
 
 - Enable MSI-X if the endpoint supports.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmeDQNIACgkQVZ8R5v6R
 zvWhbwf/fGgfkXamkShATibCIPn0aL8kCA67OUmdxo6wVSdv3/EX/1xF7Be2fwGG
 1uyMFQdt/CpD8bo3I4YfNgUFG3F2VkwnPoYUXMlSpyyres6vCawW99gM3PqU6XZF
 zk3vDcofWHgevHAe5GEU0ntIOwg/orTZJsTVN75EME2qVjpVrEiRE/hqjXfWd1s+
 1H1e+9KIn3r2Vg6q2JH0+/i4OUwtUNteUPdERWRl4T0pKiiu7e0ZxAnybiD3oP5z
 zTQY5zzQFUpgS0Nzka18+h42emSW12CyC7kTz39XHoFQgUEL1hD0e91/sWy7n66W
 paVDtFEBwt5xFMexaJfkI+T83MelPg==
 =D+sS
 -----END PGP SIGNATURE-----

Merge tag 'mhi-for-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next

Pull MHI update from Manivannan:

MHI Host
========

- Free the "img_info::mhi_buf" in the error path of mhi_alloc_bhie_table() to
  avoid memory leak.

- Add support for Qualcomm X100 5G RAN Accelerator card with relevant channel
  and event config.

- Enable MSI-X if the endpoint supports.

* tag 'mhi-for-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
  bus: mhi: host: pci_generic: Enable MSI-X if the endpoint supports
  bus: mhi: host: pci_generic: Add support for QDU100 device
  bus: mhi: host: Free mhi_buf vector inside mhi_alloc_bhie_table()
2025-01-12 13:57:24 +01:00
James Clark
aaf69eff6c coresight: Pass guest TRFCR value to KVM
Currently the userspace and kernel filters for guests are never set, so
no trace will be generated for them. Add support for tracing guests by
passing the desired TRFCR value to KVM so it can be applied to the
guest.

By writing either E1TRE or E0TRE, filtering on either guest kernel or
guest userspace is also supported. And if both E1TRE and E0TRE are
cleared when exclude_guest is set, that option is supported too. This
change also brings exclude_host support which is difficult to add as a
separate commit without excess churn and resulting in no trace at all.

cpu_prohibit_trace() gets moved to TRBE because the ETM driver doesn't
need the read, it already has the base TRFCR value. TRBE only needs
the read to disable it and then restore.

Testing
=======

The addresses were counted with the following:

  $ perf report -D | grep -Eo 'EL2|EL1|EL0' | sort | uniq -c

Guest kernel only:

  $ perf record -e cs_etm//Gk -a -- true
    535 EL1
      1 EL2

Guest user only (only 5 addresses because the guest runs slowly in the
model):

  $ perf record -e cs_etm//Gu -a -- true
    5 EL0

Host kernel only:

  $  perf record -e cs_etm//Hk -a -- true
   3501 EL2

Host userspace only:

  $  perf record -e cs_etm//Hu -a -- true
    408 EL0
      1 EL2

Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20250106142446.628923-8-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-12 12:50:11 +00:00
James Clark
054b88391b KVM: arm64: Support trace filtering for guests
For nVHE, switch the filter value in and out if the Coresight driver
asks for it. This will support filters for guests when sinks other than
TRBE are used.

For VHE, just write the filter directly to TRFCR_EL1 where trace can be
used even with TRBE sinks.

Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-7-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-12 12:50:11 +00:00
James Clark
a665e3bc88 KVM: arm64: coresight: Give TRBE enabled state to KVM
Currently in nVHE, KVM has to check if TRBE is enabled on every guest
switch even if it was never used. Because it's a debug feature and is
more likely to not be used than used, give KVM the TRBE buffer status to
allow a much simpler and faster do-nothing path in the hyp.

Protected mode now disables trace regardless of TRBE (because
trfcr_while_in_guest is always 0), which was not previously done.
However, it continues to flush whenever the buffer is enabled
regardless of the filter status. This avoids the hypothetical case of a
host that had disabled the filter but not flushed which would arise if
only doing the flush when the filter was enabled.

Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-6-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-12 12:50:11 +00:00
James Clark
a2b579c41f coresight: trbe: Remove redundant disable call
trbe_drain_and_disable_local() just clears TRBLIMITR and drains.
TRBLIMITR is already cleared on the next line after this call, so
replace it with only drain. This is so we can make a kvm call that has a
preempt enabled warning from set_trbe_disabled() in the next commit,
where trbe_reset_local() is called from a preemptible hotplug path.

Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-5-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-12 12:50:11 +00:00
James Clark
c382ee674c arm64/sysreg/tools: Move TRFCR definitions to sysreg
Convert TRFCR to automatic generation. Add separate definitions for ELx
and EL2 as TRFCR_EL1 doesn't have CX. This also mirrors the previous
definition so no code change is required.

Also add TRFCR_EL12 which will start to be used in a later commit.

Unfortunately, to avoid breaking the Perf build with duplicate
definition errors, the tools copy of the sysreg.h header needs to be
updated at the same time rather than the usual second commit. This is
because the generated version of sysreg
(arch/arm64/include/generated/asm/sysreg-defs.h), is currently shared
and tools/ does not have its own copy.

Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-4-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-12 12:50:11 +00:00
James Clark
38138762fa tools: arm64: Update sysreg.h header files
Created with the following:

  cp include/linux/kasan-tags.h tools/include/linux/
  cp arch/arm64/include/asm/sysreg.h tools/arch/arm64/include/asm/

Update the tools copy of sysreg.h so that the next commit to add a new
register doesn't have unrelated changes in it. Because the new version
of sysreg.h includes kasan-tags.h, that file also now needs to be copied
into tools.

Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250106142446.628923-3-james.clark@linaro.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-12 12:50:11 +00:00
Greg Kroah-Hartman
6d699ca165 IIO: 1st set of new device support, features and cleanup for 6.14
Fairly quiet cycle. Usual mix of new drivers, device support in
 existing drivers, features and more general rework and cleanup.
 There are a few late breaking or long standing but complex fixes
 in here as well.
 
 There is one expected merge conflict due to an upstream fix touching
 neighboring code in ti-ads1119. The trivial resolution is the right one with
 the result ending up as:
 
 	struct {
 		s16 sample;
 		aligned_s64 timestamp;
 	} scan;
 
 New device support
 ==================
 
 adi,ad4000
 - Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688,
   AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984,
   AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series
   but with lower sampling rates and no configuration registers.
   Includes addition of timestamp channels.
 adi,adis16480
 - Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks
   to existing driver and addition of tables.
 kionix,kx022a
 - Add support for KX134ACR-LBZ accelerometer that is similar to the
   KX132ACR-LBZ but with a wider (+-64G) sensor range.
 - Add support for KX134-1211 accelerometer that is similar to the
   KX132-1211 but with a wider (+-16G) sensor range.
 nxp,fxls8962af
 - Add support for fxls8974cf and fxls8967af accelerometers, Both are
   compatible with fxls8962af but with different device IDs which are used in
   presence checks.
 renesas,rzg2l
 - Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors
   precede this to allow for chip differences).
 rohm,bd79704
 - New driver for this 6 channel DAC.
 st,mpu6050
 - Support he IAM20380 which is effectively a cut down IAM20608 IMU with only
   a gyroscope (no accelerometer).
 st,stm-timmer-trigger
 - Add support for ADC trigger use case for the STM32MP25 SOC. Do not support
   the counter functionality in this driver as that is handled by the
   counter subsystem.
 ti,opt4060
 - New driver for this RGBW color sensor.
 
 Driver drop
 ===========
 
 rohm,bu20008
 - Drop as decision was made to not mass produce this light sensor after
   Matti had done all the work to get a driver upstream.
 
 Features
 ========
 
 adi,ad_sigma_delta library + ad7124
 - Allow for GPIO to check interrupt status, enabling this device on
   more platforms that don't obey prior (non general) assumptions on
   how the interrupt chips work.
 - Allow variation in reset sequence length allowing chip specific
   optimizations rather than always using worst case.
 adi,ad7124
 - Add temperature channel support.
 adi,ad7173
 - Add support calibration modes for this family of ADCs.
 adi,adxl345
 - Binding update to allow specification of which interrupt line is
   connected (or none).
 - Support interrupts and FIFO based data capture.
 bosch,bme680
 - Add regulators support. Note this required a new binding doc rather than
   use of trivial-devices
 - Runtime PM support.
 microchip,pac1921
 - Add ACPI support including _DSM for shunt value and label.
 renesas,rzg2l
 - Enable runtime autosuspend.
 - Add suspend and resume support.
 tyhx,hx9023s
 - Add loading of a firmware file used to set defaults for some
   configuration registers.
 vishay,veml6030
 - Support triggered buffers allowing efficient data capture at
   higher speeds.
 - Add regmap cache to reduce access to device.
 
 Cleanup and minor fixes
 =======================
 
 cross-tree
 - Another batch of conversions to devm_regulator_get_enable_read_voltage()
   helper and related conversions to full devm that this enables.
 - Various patches using guard() to allow early returns and simpler
   code flow.
 - Various conversions from s64 timestamp __aligned(8) to aligned_s64 type.
   Includes a few cleanups where this unsigned and it should have been
   signed.
 - Fix up some missing types for drive-open-drain in dt-binding docs.
 core
 - Add missing documentation for iio_dmaengine_buffer_setup_ext()
 - Add check that all buffers passed to iio_read_channel_ext_info()
   and iio_read_channel_label() are page sized and page aligned.
   Done this way because the callbacks are almost always only used
   to fill sysfs attributes. The check covers the tiny percentage
   of cases where use is made of this data in a consumer driver.
 - Mark scan_timestamp memory of struct iio_dev private ensuring no
   drivers change the value which belongs to the IIO core.
 documentation
 - Various missing ABI docs added.
 - ABI docs made to use Y consistently as the wildcard for channel
   number.
 - Combine duplicate in_currentY_raw entries in ABI docs.
 iio-mux
 - Fix alignment of buffers passed to iio_channel_read_ext_info().
 adi,ad_sigma_delta library
 - Respect keep_cs_asserted flag in read path.
 - Close a race condition around irq enabling and disabling.
 - Use explicit unsigned int in place of unsigned.
 adi,ad6695
 - Move dt-binding header under adc sub-directory and fix include path in dt
   example.
 adi,ad7124
 - Check number of channels in DT doesn't exceed what the driver can handle.
 - Check input specified in DT are possible.
 - Improved error reporting during probe.
 adi,ad7173
 - Drop unused structure element.
 adi,ad7293
 - Ensure power is turned on before resetting.
 adi,adxl345
 - Some documentation simplification and parameter renames.
 - Add a function than unifies handling of power up and power down.
 - Add defines to have a complete set of registers defined.
 - Add missing \n to end of error messages.
 amlogic,meson_saradc
 - Simplify handling of the REG11 register access.
 awinic,aw96104
 - Constify iio_info structure.
 bosch,bmp085
 - Add to dt-binding to indicate devices support SPI.
 bosch,bmp280
 - Use sizeof() to replace a somewhat magic 2.
 - Rename sleep related variables so the unit is included and use
   fsleep() to replace usleep_range() calls.
 bosch,bno055
 - Constify struct bin_attribute
 capella,cm3232
 - Reset device before checking hardware ID inline with suggested flow
   from datasheet.
 diolan,dln2
 - Simplify zeroing of structure used to gather up data by just
   clearing the whole thing before writing rather than trying to
   clear out he padding after write.
 freescale,vf610
 - Use devm_ and dev_error_probe() to simplify code and allow dropping
   of explicit remove() callback.
 invensense,timestamp library
 - Use a cast to remove possibility of integer overflow.
 kionix,kx022a
 - Increase reset delay a little.
 maxim,max1363
 - Use a buffer of sufficient size in iio_priv() rather than allocating
   variable sized buffer at use time.
 microchip,mcp4725
 - Replace of_property_read_bool() with of_property_present() for
   detecting presence of regulator which is obviously not a bool.
 nxp,fxls8962af
 - Add wakeup-source property to the dt binding to allow these sensors
   to wake the system up from suspend.
 - Enable finer grained build when not all bus types need to be supported.
 renesas,rzg2l
 - Use dev_err_probe(), improving handling of probe errors and simplifying
   code.
 - Convert to devm_ based cleanup.
 - Remove unnecessary runtime PM complexity as clocks are managed through
   PM domains.
 - Switch pm_ptr() removing need for __maybe_unused markings.
 - use read_poll_timeout() to replace open coded equivalent.
 samsung, ssp_sensors
 - Simplify code by always providing timestamp whether or not it
   is enabled.
 st,lsm6dsx
 - Avoid need to include linux/i3c/master by using i3cdev_to_dev() to
   get to the contained struct device.
 st,stm32-timer-trigger
 - Check for clk_enable() fails.
 vishay,veml6030
 - Use new gts-helper functions and fix the _scale attribute to take into
   account changes in gain and integration time.
 
 Various other typo fixes in variable names + documentation and help text.
 A few whitespace cleanup patches.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmeCb2kRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foi3UA//e3HT75qbJbqtsSyVDCuYqCovWlb1HsBZ
 qsROx+56cQG+x0fTaJ1XfESQ9agRrm2+tVRPLrKGnwhp9Lz9b2ZcW+Je2h0rZi+l
 nwxdGNuv0wpatsZwmrF46ELcwaf0PSwpuTTbM9qXFiHSoulZ5wbDebelSJNGkdok
 vO4a6K5L4DcuiJ7uuEp9pgGC4k/jGZMGTUBTBGH8ViRC3A0fMcc1ZWKFH5mz6ZWM
 +1f+cfy09QORPcfSAqRE9j5md3OkmBcG9F8qux73raJfLQQTMWADDTh6rZS5bvqM
 4jueqlkIKOee9twlEzux7OZD/oZa+ppmZwuHEbv7M+nGWMFqEkRC6OKkSCKUrTFX
 do+gdJxsUNMirz6w+ZJ2oAo+jEbwvV7/BkpZ/C3ZeQKH4XPytboo4QYvIU9JXxEr
 JmcOfheaYqcNIM/CavJSAZmZCKZ+fx0nUkHu2C5KXezb6/qUJFxWO83gWKDmlgJv
 X+MewmYtBPSeGQSMOLoVIH+59Z3d/Fiz0O4ByfMY5yNhzqqaC5Ro9bEarcxeUUVS
 OAn8XXuX0IJ2pbWjp72E4Bu1VGjtsyYf4FIkFwt7179TTxUZ7qulHHviojj9AdWe
 VHlXuWKwwEZDdLbkLDOulLVc9OtCai7mQvjHHKqpZuLfOeQokkiP9cW5ojGChOGz
 KNnvygVhb3Q=
 =IRr2
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Pull IIO updaate from Jonathan:

IIO: 1st set of new device support, features and cleanup for 6.14

Fairly quiet cycle. Usual mix of new drivers, device support in
existing drivers, features and more general rework and cleanup.
There are a few late breaking or long standing but complex fixes
in here as well.

There is one expected merge conflict due to an upstream fix touching
neighboring code in ti-ads1119. The trivial resolution is the right one with
the result ending up as:

	struct {
		s16 sample;
		aligned_s64 timestamp;
	} scan;

New device support
==================

adi,ad4000
- Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688,
  AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984,
  AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series
  but with lower sampling rates and no configuration registers.
  Includes addition of timestamp channels.
adi,adis16480
- Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks
  to existing driver and addition of tables.
kionix,kx022a
- Add support for KX134ACR-LBZ accelerometer that is similar to the
  KX132ACR-LBZ but with a wider (+-64G) sensor range.
- Add support for KX134-1211 accelerometer that is similar to the
  KX132-1211 but with a wider (+-16G) sensor range.
nxp,fxls8962af
- Add support for fxls8974cf and fxls8967af accelerometers, Both are
  compatible with fxls8962af but with different device IDs which are used in
  presence checks.
renesas,rzg2l
- Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors
  precede this to allow for chip differences).
rohm,bd79704
- New driver for this 6 channel DAC.
st,mpu6050
- Support he IAM20380 which is effectively a cut down IAM20608 IMU with only
  a gyroscope (no accelerometer).
st,stm-timmer-trigger
- Add support for ADC trigger use case for the STM32MP25 SOC. Do not support
  the counter functionality in this driver as that is handled by the
  counter subsystem.
ti,opt4060
- New driver for this RGBW color sensor.

Driver drop
===========

rohm,bu20008
- Drop as decision was made to not mass produce this light sensor after
  Matti had done all the work to get a driver upstream.

Features
========

adi,ad_sigma_delta library + ad7124
- Allow for GPIO to check interrupt status, enabling this device on
  more platforms that don't obey prior (non general) assumptions on
  how the interrupt chips work.
- Allow variation in reset sequence length allowing chip specific
  optimizations rather than always using worst case.
adi,ad7124
- Add temperature channel support.
adi,ad7173
- Add support calibration modes for this family of ADCs.
adi,adxl345
- Binding update to allow specification of which interrupt line is
  connected (or none).
- Support interrupts and FIFO based data capture.
bosch,bme680
- Add regulators support. Note this required a new binding doc rather than
  use of trivial-devices
- Runtime PM support.
microchip,pac1921
- Add ACPI support including _DSM for shunt value and label.
renesas,rzg2l
- Enable runtime autosuspend.
- Add suspend and resume support.
tyhx,hx9023s
- Add loading of a firmware file used to set defaults for some
  configuration registers.
vishay,veml6030
- Support triggered buffers allowing efficient data capture at
  higher speeds.
- Add regmap cache to reduce access to device.

Cleanup and minor fixes
=======================

cross-tree
- Another batch of conversions to devm_regulator_get_enable_read_voltage()
  helper and related conversions to full devm that this enables.
- Various patches using guard() to allow early returns and simpler
  code flow.
- Various conversions from s64 timestamp __aligned(8) to aligned_s64 type.
  Includes a few cleanups where this unsigned and it should have been
  signed.
- Fix up some missing types for drive-open-drain in dt-binding docs.
core
- Add missing documentation for iio_dmaengine_buffer_setup_ext()
- Add check that all buffers passed to iio_read_channel_ext_info()
  and iio_read_channel_label() are page sized and page aligned.
  Done this way because the callbacks are almost always only used
  to fill sysfs attributes. The check covers the tiny percentage
  of cases where use is made of this data in a consumer driver.
- Mark scan_timestamp memory of struct iio_dev private ensuring no
  drivers change the value which belongs to the IIO core.
documentation
- Various missing ABI docs added.
- ABI docs made to use Y consistently as the wildcard for channel
  number.
- Combine duplicate in_currentY_raw entries in ABI docs.
iio-mux
- Fix alignment of buffers passed to iio_channel_read_ext_info().
adi,ad_sigma_delta library
- Respect keep_cs_asserted flag in read path.
- Close a race condition around irq enabling and disabling.
- Use explicit unsigned int in place of unsigned.
adi,ad6695
- Move dt-binding header under adc sub-directory and fix include path in dt
  example.
adi,ad7124
- Check number of channels in DT doesn't exceed what the driver can handle.
- Check input specified in DT are possible.
- Improved error reporting during probe.
adi,ad7173
- Drop unused structure element.
adi,ad7293
- Ensure power is turned on before resetting.
adi,adxl345
- Some documentation simplification and parameter renames.
- Add a function than unifies handling of power up and power down.
- Add defines to have a complete set of registers defined.
- Add missing \n to end of error messages.
amlogic,meson_saradc
- Simplify handling of the REG11 register access.
awinic,aw96104
- Constify iio_info structure.
bosch,bmp085
- Add to dt-binding to indicate devices support SPI.
bosch,bmp280
- Use sizeof() to replace a somewhat magic 2.
- Rename sleep related variables so the unit is included and use
  fsleep() to replace usleep_range() calls.
bosch,bno055
- Constify struct bin_attribute
capella,cm3232
- Reset device before checking hardware ID inline with suggested flow
  from datasheet.
diolan,dln2
- Simplify zeroing of structure used to gather up data by just
  clearing the whole thing before writing rather than trying to
  clear out he padding after write.
freescale,vf610
- Use devm_ and dev_error_probe() to simplify code and allow dropping
  of explicit remove() callback.
invensense,timestamp library
- Use a cast to remove possibility of integer overflow.
kionix,kx022a
- Increase reset delay a little.
maxim,max1363
- Use a buffer of sufficient size in iio_priv() rather than allocating
  variable sized buffer at use time.
microchip,mcp4725
- Replace of_property_read_bool() with of_property_present() for
  detecting presence of regulator which is obviously not a bool.
nxp,fxls8962af
- Add wakeup-source property to the dt binding to allow these sensors
  to wake the system up from suspend.
- Enable finer grained build when not all bus types need to be supported.
renesas,rzg2l
- Use dev_err_probe(), improving handling of probe errors and simplifying
  code.
- Convert to devm_ based cleanup.
- Remove unnecessary runtime PM complexity as clocks are managed through
  PM domains.
- Switch pm_ptr() removing need for __maybe_unused markings.
- use read_poll_timeout() to replace open coded equivalent.
samsung, ssp_sensors
- Simplify code by always providing timestamp whether or not it
  is enabled.
st,lsm6dsx
- Avoid need to include linux/i3c/master by using i3cdev_to_dev() to
  get to the contained struct device.
st,stm32-timer-trigger
- Check for clk_enable() fails.
vishay,veml6030
- Use new gts-helper functions and fix the _scale attribute to take into
  account changes in gain and integration time.

Various other typo fixes in variable names + documentation and help text.
A few whitespace cleanup patches.

* tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
  iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
  iio: adc: ad7625: Add ending newlines to error messages
  iio: accel: adxl345: complete the list of defines
  iio: accel: adxl345: add FIFO with watermark events
  iio: accel: adxl345: initialize FIFO delay value for SPI
  iio: accel: adxl345: introduce interrupt handling
  iio: light: veml3235: fix scale to conform to ABI
  iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
  iio: light: veml3235: extend regmap to add cache
  iio: light: veml3235: fix code style
  dt-bindings: iio: accel: adxl345: add interrupt-names
  dt-bindings: iio: accel: adxl345: make interrupts not a required property
  dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain
  dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
  dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain
  iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access
  iio: adc: meson: use tabs instead of spaces for some REG11 bit fields
  iio: adc: meson: fix voltage reference selection field name typo
  iio: adc: rockchip: correct alignment of timestamp
  iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
  ...
2025-01-12 13:45:22 +01:00
Greg Kroah-Hartman
b8ae08db7a Update extcon next for v6.14
Detailed description for this pull request:
 - Fix null pointer check of memory allocation on extcon-rtk-type-c.c.
 - Add EXTCON subsystem documentation including the detailed description/example.
 - Drop unneeded init of struct i2c_device_id:driver_data on extcon-fsa9480/pth5150.c.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEsSpuqBtbWtRe4rLGnM3fLN7rz1MFAmeCWgcACgkQnM3fLN7r
 z1Modg/9H5XR49+8pFZm69eGSvqWQqS5nbRDJoIDZvSpaib+zWN0VIpMRECj7n/6
 ZFqAiLrXi0r7JW3zss6O+nh5EoOM5GlpHBs2GtEPTEuLS8IDW1FTDZKvyEBG9Fzh
 FyPA1CKJEKoWe+6caivVR2s6ifaZDDx7gp8k6NhpXK1FVop+IhLv//yCCaR5jIN1
 WqyVme2iFbjR237CiRY4QccBgvuM4gCQEzswxmJZI8IZxjyjNXTRT7E5kUDu8Z8j
 IqYzGubqgoWVPUKCRmi0aw+WZ6EcjBjC8MuJJhopF6QiW4NG+EWF6ZXscVzTOys2
 6h24fypyaxM9cA76KbtXue2j/zVNHE62wfy+44IG1x58aT5U9tMWh3UVo9/PG3nJ
 jXwbAot0iV0yJtqK28Dcj1BE0oFEgWcluo2mNWO1H+i91AGzSl0APvm03Xrja9Mf
 k6zTbVixo9EKNM9Se9IQE9SyuvhD9C6UgVks3nG3doge8WmcXcyNnQAPF9dbNTBg
 Fc9t3biT2Du1bja7rCWhg5+4aX//NT54WxSNawm8AN4zMPBwxqmx5HcmvpNAMDDR
 8U6MH2mIhfP2cTSPi+BelveL9fj4cz7y7nCnPs4y9wyYJA6VIjUKiSJo5F3CrXFd
 uhR7gtTHpgVTluiGJbv3IskYUzqitnihKfUk62DNoB1oHktF/dQ=
 =tjVp
 -----END PGP SIGNATURE-----

Merge tag 'extcon-next-for-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Pull extcon updates from Chanwoo:

Update extcon next for v6.14

Detailed description for this pull request:
- Fix null pointer check of memory allocation on extcon-rtk-type-c.c.
- Add EXTCON subsystem documentation including the detailed description/example.
- Drop unneeded init of struct i2c_device_id:driver_data on extcon-fsa9480/pth5150.c.

* tag 'extcon-next-for-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  Documentation: extcon: add documentation for Extcon subsystem
  extcon: realtek: fix NULL deref check in extcon_rtk_type_c_probe
2025-01-12 13:44:27 +01:00
Greg Kroah-Hartman
25e7eded88 coresight: Updates for Linux v6.14
Coresight self-hosted tracing subsystem updates for v6.14 includes:
 
   - Support for static traceid allocation for devices
   - Support for impdef, static trace filtering in Qualcomm replicators
   - Miscellaneous fixes
 
 Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuFy0byloRoXZHaWBxcXRZPKyBqEFAmd/ru0ACgkQxcXRZPKy
 BqHXuQ//eetyHE3deK2syf0hCdVAkGO6S67HpGaES8ZOi1Wz/TQ3AakFpTMoDWf8
 +caMH6Fkr+2um9ogTeE3PQfDGjKa38xfR6AAG8WwgNPtQnOSgqE9H2tn7OhyUwAf
 rWKYd9pk8f7gYvsyShzvUqbNi5Qw7RGepT/NX55r8xltpp6bEFkDiPGjnMxZP87u
 69RDoiCGURWQCy5UF98G7T9c5nwiOuHKSlqd+ayPb66EzsBl4CdaqE2xyJ7SK3Fw
 Sc7Ir9Ett4SzhOx6UUVJ9X4Su0IOOAF7xgBpHZpX3OFGgzgns6epOb63JBjoAP+9
 v7OvXxuryp7diowg4ME6M8xY/LFYL1nWj19Wti+6y9VQ4+uXH4zQa2urUBm4ZvlY
 /bM7486TWcXIiURZqGXlItDH/3zjXPsTsP7WdNWkaRkN/aDaAoYTIxT6CxNhZuwM
 rDq6Y1ccpzozbukWJzrTR4oUYdBJ3JVTGH3XOhZJWtsbumyxxPEAkxnAKolHBIDn
 +s9YdCBiDPxFEl9T+mog4NjUpER2zK8+ijV64XlCClnOK5F2Qf97XhxqhS840w0I
 DfkxFhjuGUZZ3pZvYOtF0AE+xT6AR7sq1uR67VRkSh74+fZdCD5AlsvKj3WcgGks
 vxK+PMHGNg/uY3mrEQcW4i9XgXJO9r0ZunYeJFm7p12PUft3bas=
 =mJtf
 -----END PGP SIGNATURE-----

Merge tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next

Pull coresight updates from Suzuki:

coresight: Updates for Linux v6.14

Coresight self-hosted tracing subsystem updates for v6.14 includes:

  - Support for static traceid allocation for devices
  - Support for impdef, static trace filtering in Qualcomm replicators
  - Miscellaneous fixes

Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>

* tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
  coresight-tpda: Optimize the function of reading element size
  coresight: Add support for trace filtering by source
  coresight: Add a helper to check if a device is source
  dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
  coresight: Fix dsb_mode_store() unsigned val is never less than zero
  coresight: dummy: Add static trace id support for dummy source
  coresight: Add support to get static id for system trace sources
  dt-bindings: arm: Add arm,static-trace-id for coresight dummy source
  coresight: Drop atomics in connection refcounts
  Coresight: Narrow down the matching range of tpdm
2025-01-12 13:41:43 +01:00
Takashi Iwai
3ab4a3199c ALSA: seq: Notify UMP EP and FB changes
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed.  This is no ideal
behavior.

This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port.  The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).

The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.

The sequencer protocol version is bumped to 1.0.5 along with it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
2025-01-12 13:12:21 +01:00
Takashi Iwai
10a29de13b ALSA: seq: Allow system notification in atomic
Currently the system notification helper assumes only the non-atomic
delivery.  For allowing an event delivery in non-atomic context, add
the atomic flag to the helper function.

This is a preliminary change for the support of UMP EP/FB
notification.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-8-tiwai@suse.de
2025-01-12 13:12:21 +01:00
Takashi Iwai
aca5653595 ALSA: ump: Update rawmidi name per EP name update
The rawmidi name string should be updated dynamically when the device
receives the UMP EP name update, too.  Both the core and legacy
rawmidi names are updated.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-7-tiwai@suse.de
2025-01-12 13:12:21 +01:00
Takashi Iwai
85e8d66f30 ALSA: ump: Copy safe string name to rawmidi
The UMP helper didn't set up the rawmidi name string by itself but
left it to the driver.  But since the only user (USB MIDI2 driver)
picks up the UMP info name string to the rawmidi name as default, it's
better to set up in the UMP core side.

Meanwhile, UMP receives the EP name string from the device, and it
might contain garbage letters.  We should purify the string to be
usable for the kernel as done previously for UMP Group names.

This implements the copy of the UMP info name string into the rawmidi
name at the creation of UMP EP object in a safe way to strip the
non-ASCII or non-printable characters.  Also, change the reference
from the legacy rawmidi and other places to rawmidi name field instead
of ump info; this assures the sane strings.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-6-tiwai@suse.de
2025-01-12 13:12:20 +01:00
Takashi Iwai
e3f035edad ALSA: ump: Copy FB name string more safely
The UMP group names are referred as the corresponding sequencer port
names, hence they should be proper ASCII strings.  OTOH, the UMP group
names are composed from the UMP FB strings that are received from the
device; i.e. a device may give some bogus letters and we can't trust
them fully.

To assure that the group names consist of the proper ASCII strings,
replace the normal string copy and append operations with special ones
that strip the non-printable letters.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-5-tiwai@suse.de
2025-01-12 13:12:20 +01:00
Takashi Iwai
7bb49d2e8b ALSA: rawmidi: Bump protocol version to 2.0.5
Bump the protocol version to 2.0.5, as we extended the rawmidi ABI for
the new tied_device info and the substream inactive flag.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-4-tiwai@suse.de
2025-01-12 13:12:20 +01:00
Takashi Iwai
b8fefed73a ALSA: rawmidi: Show substream activity in info ioctl
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information.  So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.

This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream.  When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
2025-01-12 13:12:20 +01:00
Takashi Iwai
bdf46443f3 ALSA: rawmidi: Expose the tied device number in info ioctl
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.

This patch extends the rawmidi info ioctl to show the tied device
number.  As default it stores -1, indicating that no tied device.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
2025-01-12 13:12:20 +01:00
Paolo Bonzini
a5546c2f0d KVM: s390: three small bugfixes
Fix a latent bug when the kernel is compiled in debug mode.
 Two small UCONTROL fixes and their selftests.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoWuZBM6M3lCBSfTnuARItAMU6BMFAmd+aN0ACgkQuARItAMU
 6BOtohAApC3dPKw1pwlxnvZLSHm7TizFpvczHqqyF/sglz1js/YYRDmXPy0wJiw+
 mYa6qhhzDD1NsCw+7Fq8Zsh8kh0RjeiBLAJY/651wQUJzkXLed1dqei9uegXsGgi
 TqOZct07avQaxrlfH3VHsaE+QOeqQZai5INoEmk7G1U+zwoMBYRNCq2tyULEixCt
 8iMg+5cMbXICmiQ9X2KxkslkWwR3+hpSFpOvVATu6R1PO42fLT/Sqxk/YKAQIaq1
 9tNkHTUISjz5vLJgOUfuB5kLCQoCwwuONWBREoyKRtWsoy+QdevphIB4LfqDq43T
 XOFdSVZa2JNUZa3/HiZJ0UJAk2R1pYXsQJBYgOJMnclqThY677DOetrKR8QNmPwB
 +a+2WTLkeJzL7T0a2eChhXqpUd03W6MjAnG8AYAK05imV3PKlaZxiV/Nfzik9ghM
 ab75HzaofX6zgJK6VxfEAggMCi84jDmHzlrwwr6DLFqFcsZ7tV5PoPcWIm3f6SpG
 l0ARCHXGZ0cIeBwYG7ZIzHVMpzATwea61ov7LLTm9jUAIF0di67ry/e6KY/SJYiP
 uKI6S6iyjjUl1VbqK2gAiU8fTscAY9oxd54NYdQ9r3gHYjaWI3ikpWz6EMotIvnh
 bDWv0ZC9fF2qlajrenD+nc7q+s2N1UWaH8NYEkPBeMrY9FHmmD4=
 =NID3
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-master-6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: three small bugfixes

Fix a latent bug when the kernel is compiled in debug mode.
Two small UCONTROL fixes and their selftests.
2025-01-12 12:51:05 +01:00
Paolo Bonzini
5c99a684c9 KVM/arm64 changes for 6.13, part #3
- Always check page state in hyp_ack_unshare()
 
  - Align set_id_regs selftest with the fact that ASIDBITS field is RO
 
  - Various vPMU fixes for bugs that only affect nested virt
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZ3Cfbxccb2xpdmVyLnVw
 dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFuc4AQDcDPzJAmtA2xem+JOTPwTOl4Fk
 TKDfwes3zZ/42/BA8wEA2X4vKcSwQTujdCpRrRiQvegn3pcT4V9oo9TB0kzjoQU=
 =KEa8
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-6.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 changes for 6.13, part #3

 - Always check page state in hyp_ack_unshare()

 - Align set_id_regs selftest with the fact that ASIDBITS field is RO

 - Various vPMU fixes for bugs that only affect nested virt
2025-01-12 12:50:39 +01:00
Paolo Bonzini
71b7bf1702 Merge branch 'kvm-e500-check-writable-pfn' into HEAD
The new __kvm_faultin_pfn() function is upset by the fact that e500
KVM ignores host page permissions - __kvm_faultin requires a "writable"
outgoing argument, but e500 KVM is passing NULL.

While a simple fix would be possible that simply allows writable to
be NULL, it is quite ugly to have e500 KVM ignore completely the host
permissions and map readonly host pages as guest-writable.  Merge a more
complete fix and remove the VMA-based attempts at building huge shadow TLB
entries.  Using a PTE lookup, similar to what is done for x86, is better
and works with remap_pfn_range() because it does not assume that VM_PFNMAP
areas are contiguous.  Note that the same incorrect logic is there in
ARM's get_vma_page_shift() and RISC-V's kvm_riscv_gstage_ioremap().

Fortunately, for e500 most of the code is already there; it just has to
be changed to compute the range from find_linux_pte()'s output rather
than find_vma().  The new code works for both VM_PFNMAP and hugetlb
mappings, so the latter is removed.

Patches 2-5 were tested by the reporter, Christian Zigotzky.  Since
the difference with v1 is minimal, I am going to send it to Linus
today.
2025-01-12 12:48:14 +01:00
Quentin Perret
6f91d31d47 KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
Simplify the __pkvm_host_donate_hyp() and pkvm_hyp_donate_host() paths
by not using the pkvm_mem_transition machinery. As the last users of
this, also remove all the now unused code.

No functional changes intended.

Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250110121936.1559655-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-01-12 10:46:39 +00:00