Link IRQs to NAPI instances via netdev-genl API so that users can query
this information with netlink.
Compare the output of /proc/interrupts (noting that IRQ 128 is the
"other" IRQ which does not appear to have a NAPI instance):
$ cat /proc/interrupts | grep enp86s0 | cut --delimiter=":" -f1
128
129
130
131
132
The output from netlink shows the mapping of NAPI IDs to IRQs (again
noting that 128 is absent as it is the "other" IRQ):
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8196,
'ifindex': 2,
'irq': 132},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8195,
'ifindex': 2,
'irq': 131},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8194,
'ifindex': 2,
'irq': 130},
{'defer-hard-irqs': 0,
'gro-flush-timeout': 0,
'id': 8193,
'ifindex': 2,
'irq': 129}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-14-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement "mdd-auto-reset-vf" priv-flag to handle Tx and Rx MDD events for VFs.
This flag is also used in other network adapters like ICE.
Usage:
- "on" - The problematic VF will be automatically reset
if a malformed descriptor is detected.
- "off" - The problematic VF will be disabled.
In cases where a VF sends malformed packets classified as malicious, it can
cause the Tx queue to freeze, rendering it unusable for several minutes. When
an MDD event occurs, this new implementation allows for a graceful VF reset to
quickly restore operational state.
Currently, VF queues are disabled if an MDD event occurs. This patch adds the
ability to reset the VF if a Tx or Rx MDD event occurs. It also includes MDD
event logging throttling to avoid dmesg pollution and unifies the format of
Tx and Rx MDD messages.
Note: Standard message rate limiting functions like dev_info_ratelimited()
do not meet our requirements. Custom rate limiting is implemented,
please see the code for details.
Co-developed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Co-developed-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbevf_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
ixgbevf_clean_rx_irq(). Remove this error pointer handing instead use
plain int return value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbe_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
ixgbe_clean_rx_irq(). Remove this error pointer handing instead use
plain int return value.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
igb_run_xdp() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
igb_clean_rx_irq(). Remove this error pointer handing instead use plain
int return value.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
igc_xdp_run_prog() converts customed xdp action to a negative error code
with the sk_buff pointer type which be checked with IS_ERR in
igc_clean_rx_irq(). Remove this error pointer handing instead use plain
int return value to fix this smatch warnings:
drivers/net/ethernet/intel/igc/igc_main.c:2533
igc_xdp_run_prog() warn: passing zero to 'ERR_PTR'
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the driver would always close and reopen the network interface
when setting/removing the XDP program, regardless of the presence of XDP
resources. This could cause unnecessary disruptions.
To avoid this, introduces a check to determine if there is a need to
close and reopen the interface, allowing for seamless hot-swapping of
XDP programs.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for AF_XDP zero-copy transmit path.
A new TX buffer type IGB_TYPE_XSK is introduced to indicate that the Tx
frame was allocated from the xsk buff pool, so igb_clean_tx_ring() and
igb_clean_tx_irq() can clean the buffers correctly based on type.
igb_xmit_zc() performs the actual packet transmit when AF_XDP zero-copy is
enabled. We share the TX ring between slow path, XDP and AF_XDP
zero-copy, so we use the netdev queue lock to ensure mutual exclusion.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Set olinfo_status in igb_xmit_zc() so that frames are transmitted,
Use READ_ONCE() for xsk_pool and check Tx disabled and carrier in
igb_xmit_zc(), Add FIXME for RS bit]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for AF_XDP zero-copy receive path.
When AF_XDP zero-copy is enabled, the rx buffers are allocated from the
xsk buff pool using igb_alloc_rx_buffers_zc().
Use xsk_pool_get_rx_frame_size() to set SRRCTL rx buf size when zero-copy
is enabled.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Port to v6.12 and provide napi_id for xdp_rxq_info_reg(),
RCT, remove NETDEV_XDP_ACT_XSK_ZEROCOPY, update NTC handling,
READ_ONCE() xsk_pool, likelyfy for XDP_REDIRECT case]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move XDP finalize and Rx statistics update into separate functions. This
way, they can be reused by the XDP and XDP/ZC code later.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the following ring flag:
- IGB_RING_FLAG_TX_DISABLED (when xsk pool is being setup)
Add a xdp_buff array for use with XSK receive batch API, and a pointer
to xsk_pool in igb_adapter.
Add enable/disable functions for TX and RX rings.
Add enable/disable functions for XSK pool.
Add xsk wakeup function.
None of the above functionality will be active until
NETDEV_XDP_ACT_XSK_ZEROCOPY is advertised in netdev->xdp_features.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Add READ/WRITE_ONCE(), synchronize_net(),
remove IGB_RING_FLAG_AF_XDP_ZC]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce igb_xdp_is_enabled() to check if an XDP program is assigned to
the device. Use that wherever xdp_prog is read and evaluated.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Split patches and use READ_ONCE()]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove static qualifiers on the following functions to be able to call
from XSK specific file that is added in the later patches:
- igb_xdp_tx_queue_mapping()
- igb_xdp_ring_update_tail()
- igb_clean_tx_ring()
- igb_clean_rx_ring()
- igb_xdp_xmit_back()
- igb_process_skb_fields()
While at it, inline igb_xdp_tx_queue_mapping() and
igb_xdp_ring_update_tail(). These functions are small enough and used in
XDP hot paths.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
[Kurt: Split patches, inline small XDP functions]
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to access EC memory region HOST command and ACPI memory
region directly.
The memory region comes from the CRS ACPI resource descriptor.
The driver retrieves the memory information by adding a resource walker
for the CRS region. If a memory region is found, it is mapped and the
driver uses a new set of read/write primitives to access the EC doorbell
and external registers.
Once the memory is mapped, it belongs to the driver:
grep GOOG0004 /proc/iomem
fe0b0000-fe0bffff : GOOG0004:00
We can verify the communication is established checking the EC version,
or monitoring the commands using the cros-ec kernel tracer.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20250107174514.2748108-3-gwendal@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Remove cros_ec_lpc_ops global variable, since EC specific info can be
stored in the device private structure, introduced in
commit e4dbf9d65e ("platform/chrome: cros_ec_lpc: add a "quirks" system").
Add ec_lpc pointer to read/write function to be able to access ec
specific data.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20250107174514.2748108-2-gwendal@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: decode link types present in tests
Using a kernel built for the net selftest target to run drivers/net
tests currently fails, because the net kernel automatically spawns
a handful of tunnel devices which YNL can't decode.
Fill in those missing link types in rt_link. We need to extend subset
support a bit for it to work.
v1: https://lore.kernel.org/20250105012523.1722231-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250107022820.2087101-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some of our tests load vti and ip6tnl so not being able to decode
the link attrs gets in the way of using Python YNL for testing.
Decode link attributes for ip6tnl, vti and vti6.
ip6tnl uses IFLA_IPTUN_FLAGS as u32, while ipv4 and sit expect
a u16 attribute, so we have a (first?) subset type override...
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250107022820.2087101-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When parsing throws an exception one often has to figure out which
attribute couldn't be parsed from first principles. For families
with large message parsing trees like rtnetlink guessing the
attribute can be hard.
Print a bit of information as the exception travels out, e.g.:
# when dumping rt links
Error decoding 'flags' from 'linkinfo-ip6tnl-attrs'
Error decoding 'data' from 'linkinfo-attrs'
Error decoding 'linkinfo' from 'link-attrs'
Traceback (most recent call last):
File "/home/kicinski/linux/./tools/net/ynl/cli.py", line 119, in <module>
main()
File "/home/kicinski/linux/./tools/net/ynl/cli.py", line 100, in main
reply = ynl.dump(args.dump, attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1064, in dump
return self._op(method, vals, dump=True)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1058, in _op
return self._ops(ops)[0]
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 1045, in _ops
rsp_msg = self._decode(decoded.raw_attrs, op.attr_set.name)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 738, in _decode
subdict = self._decode(NlAttrs(attr.raw), attr_spec['nested-attributes'], search_attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 763, in _decode
decoded = self._decode_sub_msg(attr, attr_spec, search_attrs)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 714, in _decode_sub_msg
subdict = self._decode(NlAttrs(attr.raw, offset), msg_format.attr_set)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 749, in _decode
decoded = attr.as_scalar(attr_spec['type'], attr_spec.byte_order)
File "/home/kicinski/linux/tools/net/ynl/lib/ynl.py", line 147, in as_scalar
return format.unpack(self.raw)[0]
struct.error: unpack requires a buffer of 2 bytes
The Traceback is what we would previously see, the "Error..."
messages are new. We print a message per level (in the stack
order). Printing single combined message gets tricky quickly
given sub-messages etc.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250107022820.2087101-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f85949f982 ("xdp: add xdp_set_features_flag utility routine")
added routines to inform the core about XDP flag changes.
GVE support was added around the same time and missed using them.
GVE only changes the flags on error recover or resume.
Presumably the flags may change during resume if VM migrated.
User would not get the notification and upper devices would
not get a chance to recalculate their flags.
Fixes: 75eaae158b ("gve: Add XDP DROP and TX support for GQI-QPL format")
Reviewed-By: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250106180210.1861784-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While merging net to net-next I noticed that the kdoc above
__vlan_get_protocol_offset() has the wrong function name.
Fix that and all the other kdoc warnings in this file.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250106174620.1855269-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: dsa: cleanup EEE (part 2)
This is part 2 of the DSA EEE cleanups, removing what has become dead
code as a result of the EEE management phylib now does.
Patch 1 removes the useless setting of tx_lpi parameters in the
ksz driver.
Patch 2 does the same for mt753x.
Patch 3 removes the DSA core code that calls the get_mac_eee() operation.
This needs to be done before removing the implementations because doing
otherwise would cause dsa_user_get_eee() to return -EOPNOTSUPP.
Patches 4..8 remove the trivial get_mac_eee() implementations from DSA
drivers.
Patch 9 finally removes the get_mac_eee() method from struct
dsa_switch_ops.
====================
Link: https://patch.msgid.link/Z3vDwwsHSxH5D6Pm@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The get_mac_eee() is no longer called by the core DSA code, nor are
there any implementations of this method. Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllU-007UzL-KV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mv88e6xxx_get_mac_eee() is no longer called by the core DSA code.
Remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUllK-007Uz9-D7@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt753x_get_mac_eee() is no longer called by the core DSA code. Remove
it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/E1tUllF-007Uz3-95@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All implementations of get_mac_eee() now just return zero without doing
anything useful. Remove the call to this method in preparation to
removing the method from each DSA driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUlkz-007Uyl-UA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa_user_get_eee() calls the DSA switch get_mac_eee() method followed
by phylink_ethtool_get_eee(), which goes on to call
phy_ethtool_get_eee(). This overwrites all members of the passed
ethtool_keee, which means anything written by the DSA switch
get_mac_eee() method will be discarded.
Remove setting any members in mt753x_get_mac_eee().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://patch.msgid.link/E1tUlku-007Uyc-RP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa_user_get_eee() calls the DSA switch get_mac_eee() method followed
by phylink_ethtool_get_eee(), which goes on to call
phy_ethtool_get_eee(). This overwrites all members of the passed
ethtool_keee, which means anything written by the DSA switch
get_mac_eee() method will be discarded.
Remove setting any members in ksz_get_mac_eee().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tUlkp-007UyW-OR@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(un)?register_netdevice_notifier_dev_net() hold RTNL before triggering
the notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that move_netdevice_notifiers_dev_net() is assumed to be (but not
yet) protected by per-netns RTNL of both src and dst netns; we need to
convert wireless and hyperv drivers that call dev_change_net_namespace().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
(un)?register_netdevice_notifier_net() hold RTNL before triggering the
notifier for all netdev in the netns.
Let's convert the RTNL to rtnl_net_lock().
Note that the per-netns netdev notifier is protected by per-netns RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250106070751.63146-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The const struct ixgbevf_hv_mbx_ops was added in 2016 as part of
commit c6d45171d7 ("ixgbevf: Support Windows hosts (Hyper-V)")
but has remained unused.
The functions it references are still referenced elsewhere.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250105122847.27341-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit d7811e623d ("[NET]: Drop tx lock in dev_watchdog_up")
dev_watchdog_up() became a simple wrapper for __netdev_watchdog_up()
Herbert also said : "In 2.6.19 we can eliminate the unnecessary
__dev_watchdog_up and replace it with dev_watchdog_up."
This patch consolidates things to have only two functions, with
a common prefix.
- netdev_watchdog_up(), exported for the sake of one freescale driver.
This replaces __netdev_watchdog_up() and dev_watchdog_up().
- netdev_watchdog_down(), static to net/sched/sch_generic.c
This replaces dev_watchdog_down().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250105090924.1661822-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the earlier fixes meant for sm8x50 and x1e platforms,
we have to stop using the shared clk ops for sdm845 QUPs as well.
As Stephen Boyd pointed out in earlier fixes, there wasn't a problem
to mark QUP clks shared until we started parking shared RCGs at clk
registration time in commit 01a0a6cc8c ("clk: qcom: Park shared RCGs
upon registration"). Parking at init is actually harmful to the UART
when earlycon is used. If the device is pumping out data while the
frequency changes and we see garbage on the serial console until the
driver can probe and actually set a proper frequency.
This patch reverts the QUP clk sharing ops part of commit 06391eddb6
("clk: qcom: Add Global Clock controller (GCC) driver for SDM845"), so
that the QUPs on sdm845 don't get parked during clk registration and
break UART operations.
Fixes: 01a0a6cc8c ("clk: qcom: Park shared RCGs upon registration")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20241209174912.2526928-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We've noticed that NFS can hang when using RPC over TLS on an unstable
connection, and investigation shows that the RPC layer is stuck in a tight
loop attempting to transmit, but forever getting -EBADMSG back from the
underlying network. The loop begins when tcp_sendmsg_locked() returns
-EPIPE to tls_tx_records(), but that error is converted to -EBADMSG when
calling the socket's error reporting handler.
Instead of converting errors from tcp_sendmsg_locked(), let's pass them
along in this path. The RPC layer handles -EPIPE by reconnecting the
transport, which prevents the endless attempts to transmit on a broken
connection.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Link: https://patch.msgid.link/9594185559881679d81f071b181a10eb07cd079f.1736004079.git.bcodding@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
scsi_execute_cmd() function can return both negative (linux codes) and
positive (scsi_cmnd result field) error codes.
Currently the driver just passes error codes of scsi_execute_cmd() to
hwmon core, which is incorrect because hwmon only checks for negative
error codes. This leads to hwmon reporting uninitialized data to
userspace in case of SCSI errors (for example if the disk drive was
disconnected).
This patch checks scsi_execute_cmd() output and returns -EIO if it's
error code is positive.
Fixes: 5b46903d8b ("hwmon: Driver for disk and solid state drives with temperature sensors")
Signed-off-by: Daniil Stas <daniil.stas@posteo.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Cc: linux-hwmon@vger.kernel.org
Link: https://lore.kernel.org/r/20250105213618.531691-1-daniil.stas@posteo.net
[groeck: Avoid inline variable declaration for portability]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Currently, when the vdev start WMI cmd is sent from host, vdev related
parameters such as max_reg_power, max_power, and max_antenna_gain are
multiplied by 2 before being sent to the firmware. This is incorrect
because the firmware uses 1 dBm steps for power calculations.
This leads to incorrect power values being used in the firmware and
radio, potentially causing incorrect behavior.
Fix the update of max_reg_power, max_power, and max_antenna_gain values
in the ath12k_mac_vdev_start_restart function, ensuring accurate
power settings in the firmware by sending these values as-is,
without multiplication.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sathishkumar Muruganandam <quic_murugana@quicinc.com>
Signed-off-by: Santhosh Ramesh <quic_santrame@quicinc.com>
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240909073049.3423035-1-quic_santrame@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
IEEE80211_TX_STAT_NOACK_TRANSMITTED flag signifies that frame was
successfully transmitted without any errors when no-ack is requested.
In WMI Tx management completion path, driver is not setting
IEEE80211_TX_STAT_NOACK_TRANSMITTED flag for the frames with
IEEE80211_TX_CTL_NO_ACK. Without this flag, the management frame
statistics will not track such frames.
Add IEEE80211_TX_STAT_NOACK_TRANSMITTED flag as part of the flags in
skb transmit information when WMI is processing Tx completion for
management frames.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Signed-off-by: Muna Sinada <quic_msinada@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241219190845.605116-1-quic_msinada@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The current firmware coredump collection in ath12k does not include
the MLO_GLOBAL_MEM_REGION_TYPE memory. This memory region is essential
for debugging issues related to Multi-Link Operation (MLO).
Hence, add support to include MLO_GLOBAL_MEM_REGION_TYPE memory in
firmware coredump collection.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241218040149.4041728-1-quic_rajkbhag@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ieee80211_radar_detected() expects the driver to pass a channel context
configuration during MLO. This is used to identify exactly which link
detected the radar.
Add support to pass this to mac80211. Since the link arvif is not known in
the WMI event, introduce a helper iterator API,
ath12k_mac_get_any_chanctx_conf_iter(), to get the channel context
configuration.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241218-ath12k_mlo_dfs-v1-3-058e783bcfc7@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the DFS CAC time and the usable state of the primary channel in
the channel definition are used to set the CAC_RUNNING flag for the ath12k
radio structure. However, this approach is flawed because there are channel
definitions where the primary channel is not a DFS channel, but the
secondary channel is. For example, in 5 GHz band, channel 36 with 160 MHz
bandwidth. In such cases, the flag is not set correctly and hence places
where this flag is tested will not operate as expected. For example, Rx
packets will not be dropped.
To fix this issue, use the cfg80211_chandef_dfs_usable() function from
cfg80211, which returns true if at least one channel is in a usable state.
This will ensure the CAC_RUNNING flag is set properly.
Additionally, update the CAC running debug log message to include the CAC
time in milliseconds and also print the center frequency segment 1.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241218-ath12k_mlo_dfs-v1-2-058e783bcfc7@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Rename the flag ATH12K_CAC_RUNNING to ATH12K_FLAG_CAC_RUNNING to correct
the naming inconsistency in the enum ath12k_dev_flags.
No functionality changes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241218-ath12k_mlo_dfs-v1-1-058e783bcfc7@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Meta (Facebook) has a preference for all of our secondary flash
chips to be labelled "alt-bmc" for consistency of userspace tools
deal with updates. Bletchley, Harma, Minerva, and Catalina all
follow this convention but for some reason Yosemite4 is different.
Adjust the label in the dts to match the other platforms.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://patch.msgid.link/20250107162726.232402-1-patrick@stwcx.xyz
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
The x86 shadow stack support has its own set of registers. Those registers
are XSAVE-managed, but they are "supervisor state components" which means
that userspace can not touch them with XSAVE/XRSTOR. It also means that
they are not accessible from the existing ptrace ABI for XSAVE state.
Thus, there is a new ptrace get/set interface for it.
The regset code that ptrace uses provides an ->active() handler in
addition to the get/set ones. For shadow stack this ->active() handler
verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the
thread struct. The ->active() handler is checked from some call sites of
the regset get/set handlers, but not the ptrace ones. This was not
understood when shadow stack support was put in place.
As a result, both the set/get handlers can be called with
XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to
return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an
ssp_active() check to avoid surprising the kernel with shadow stack
behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That
check just happened to avoid the warning.
But the ->get() side wasn't so lucky. It can be called with shadow stacks
disabled, triggering the warning in practice, as reported by Christina
Schimpe:
WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0
[...]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? ssp_get+0x89/0xa0
? __warn+0x91/0x150
? ssp_get+0x89/0xa0
? report_bug+0x19d/0x1b0
? handle_bug+0x46/0x80
? exc_invalid_op+0x1d/0x80
? asm_exc_invalid_op+0x1f/0x30
? __pfx_ssp_get+0x10/0x10
? ssp_get+0x89/0xa0
? ssp_get+0x52/0xa0
__regset_get+0xad/0xf0
copy_regset_to_user+0x52/0xc0
ptrace_regset+0x119/0x140
ptrace_request+0x13c/0x850
? wait_task_inactive+0x142/0x1d0
? do_syscall_64+0x6d/0x90
arch_ptrace+0x102/0x300
[...]
Ensure that shadow stacks are active in a thread before looking them up
in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are
set at the same time, the active check ensures that there will be
something to find in the XSAVE buffer.
[ dhansen: changelog/subject tweaks ]
Fixes: 2fab02b25a ("x86: Add PTRACE interface for shadow stack")
Reported-by: Christina Schimpe <christina.schimpe@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Christina Schimpe <christina.schimpe@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250107233056.235536-1-rick.p.edgecombe%40intel.com