Commit graph

1,403,262 commits

Author SHA1 Message Date
Nikunj A Dadhania
38cc6495cd x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests
The hypervisor should not be intercepting GUEST_TSC_FREQ MSR(0xcOO10134)
when Secure TSC is enabled. A #VC exception will be generated otherwise. If
this should occur and Secure TSC is enabled, terminate guest execution.

Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-8-nikunj@amd.com
2025-01-07 21:26:19 +01:00
Nikunj A Dadhania
0f0502b886 x86/sev: Change TSC MSR behavior for Secure TSC enabled guests
Secure TSC enabled guests should not write to the MSR_IA32_TSC (0x10) register
as the subsequent TSC value reads are undefined. On AMD, MSR_IA32_TSC is
intercepted by the hypervisor by default. MSR_IA32_TSC read/write accesses
should not exit to the hypervisor for such guests.

Accesses to MSR_IA32_TSC need special handling in the #VC handler for the
guests with Secure TSC enabled. Writes to MSR_IA32_TSC should be ignored and
flagged once with a warning, and reads of MSR_IA32_TSC should return the
result of the RDTSC instruction.

  [ bp: Massage commit message. ]

Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250106124633.1418972-7-nikunj@amd.com
2025-01-07 21:26:06 +01:00
Lukas Wunner
15b8968dcb PCI/bwctrl: Fix NULL pointer deref on unbind and bind
The interrupt handler for bandwidth notifications, pcie_bwnotif_irq(),
dereferences a "data" pointer.

On unbind, that pointer is set to NULL by pcie_bwnotif_remove().  However
the interrupt handler may still be invoked afterwards and will dereference
that NULL pointer.

That's because the interrupt is requested using a devm_*() helper and the
driver core releases devm_*() resources *after* calling ->remove().

pcie_bwnotif_remove() does clear the Link Bandwidth Management Interrupt
Enable and Link Autonomous Bandwidth Interrupt Enable bits in the Link
Control Register, but that won't prevent execution of pcie_bwnotif_irq():
The interrupt for bandwidth notifications may be shared with AER, DPC,
PME, and hotplug.  So pcie_bwnotif_irq() may be executed as long as the
interrupt is requested.

There's a similar race on bind:  pcie_bwnotif_probe() requests the
interrupt when the "data" pointer still points to NULL.  A NULL pointer
deref may thus likewise occur if AER, DPC, PME or hotplug raise an
interrupt in-between the bandwidth controller's call to devm_request_irq()
and assignment of the "data" pointer.

Drop the devm_*() usage and reorder requesting of the interrupt to fix the
issue.

While at it, drop a stray but harmless no_free_ptr() invocation when
assigning the "data" pointer in pcie_bwnotif_probe().

Ilpo points out that the locking on unbind and bind needs to be symmetric,
so move the call to pcie_bwnotif_disable() inside the critical section
protected by pcie_bwctrl_setspeed_rwsem and pcie_bwctrl_lbms_rwsem.

Evert reports a hang on shutdown of an ASUS ROG Strix SCAR 17 G733PYV.
The issue is no longer reproducible with the present commit.

Evert found that attaching a USB-C monitor prevented the hang.  The
machine contains an ASMedia USB 3.2 controller below a hotplug-capable
Root Port.  So one possible explanation is that the controller gets
hot-removed on shutdown unless something is connected.  And the ensuing
hotplug interrupt occurs exactly when the bandwidth controller is
unregistering.  The precise cause could not be determined because the
screen had already turned black when the hang occurred.

Link: https://lore.kernel.org/r/ae2b02c9cfbefff475b6e132b0aa962aaccbd7b2.1736162539.git.lukas@wunner.de
Fixes: 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Evert Vorster <evorster@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219629
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Evert Vorster <evorster@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-01-07 14:24:06 -06:00
Charles Keepax
5bc493bf0c
regmap: sdw-mbq: Add support for SDCA deferred controls
The SDCA specification allows for controls to be deferred. In the case
of a deferred control the device will return COMMAND_IGNORED to the
8-bit operation that would cause the value to commit. Which is the
final 8-bits on a write, or the first 8-bits on a read. In the case of
receiving a defer, the regmap will poll the SDCA function busy bit,
after which the transaction will be retried, returning an error if the
function busy does not clear within a chip specific timeout. Since
this is common SDCA functionality which is the 99% use-case for MBQs
it makes sense to incorporate this functionality into the register
map. If no MBQ configuration is specified, the behaviour will default
to the existing behaviour.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-5-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-07 20:21:00 +00:00
Charles Keepax
fdd9ef3dce
regmap: sdw-mbq: Add support for further MBQ register sizes
SoundWire MBQ register maps typically contain a variety of register
sizes, which doesn't map ideally to the regmap abstraction which
expects register maps to have a consistent size. Currently the MBQ
register map only allows 16-bit registers to be defined, however
this leads to complex CODEC driver implementations with an 8-bit
register map and a 16-bit MBQ, every control will then have a custom
get and put handler that allows them to access different register
maps. Further more 32-bit MBQ quantities are not currently supported.

Add support for additional MBQ sizes and to avoid the complexity
of multiple register maps treat the val_size as a maximum size for
the register map. Within the regmap use an ancillary callback to
determine how many bytes to actually read/write to the hardware for
a specific register. In the case that no callback is defined the
behaviour defaults back to the existing behaviour of a fixed size
register map.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-4-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-07 20:20:59 +00:00
Charles Keepax
b21468e83b
ASoC: SDCA: Update list of entity_0 controls
Update the list of entity_0 controls to better match version v1.0 of the
SDCA specification. Remove both INTSTAT_CLEAR and INT_ENABLE as these are
no longer used, and add some missing controls and bits into the enum. Also
rename the SDCA_CONTROL prefix to SDCA_CTL because this better matches the
macros in the sdw_registers.h header, and the names can get quite long so
saving a few characters is definitely a plus.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-07 20:20:58 +00:00
Charles Keepax
7b16e60b31
soundwire: SDCA: Add additional SDCA address macros
Compliment the existing macro to construct an SDCA control address
with macros to extract the constituent parts, and validation of such
an address. Also update the masks for the original macro to use
GENMASK to make mental comparisons with the included comment on the
address format easier.

Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107154408.814455-2-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-01-07 20:20:57 +00:00
Su Hui
95978931d5 eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"
There is a garbage value problem in fbnic_mac_get_sensor_asic(). 'fw_cmpl'
is uninitialized which makes 'sensor' and '*val' to be stored garbage
value. Revert commit d85ebade02 ("eth: fbnic: Add hardware monitoring
support via HWMON interface") to avoid this problem.

Fixes: d85ebade02 ("eth: fbnic: Add hardware monitoring support via HWMON interface")
Signed-off-by: Su Hui <suhui@nfschina.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250106023647.47756-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-07 12:13:04 -08:00
Shubhrajyoti Datta
7681f64e64 clk: clocking-wizard: calculate dividers fractional parts
Calculate dividers fractional parts to optimally modulate output frequency.
Clocking wizard supports having multiplier m and divisors d and o.
Currently the fractional parts of m and o are not utilised.
For the pixel clock usecases a higher accuracy is needed..
Adding support for m and o to have fractional values.

Co-developed-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Tested-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Link: https://lore.kernel.org/r/20250106082937.29555-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-07 11:50:07 -08:00
Rohit Visavalia
b00b08a596 dt-bindings: clock: xilinx: Add reset GPIO for VCU
It is marked as optional as some of the ZynqMP designs are having vcu_reset
(reset pin of VCU IP) driven by proc_sys_reset, proc_sys_reset is another
PL IP driven by the PS pl_reset. So, here the VCU reset is not driven by
axi_gpio or PS GPIO so there will be no GPIO entry.

Signed-off-by: Rohit Visavalia <rohit.visavalia@amd.com>
Link: https://lore.kernel.org/r/20250107044038.100945-3-rohit.visavalia@amd.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-07 11:48:23 -08:00
Rohit Visavalia
b51adc7755 dt-bindings: clock: xilinx: Convert VCU bindings to dtschema
Convert AMD (Xilinx) VCU bindings to yaml format.
Additional changes:
   - move xlnx_vcu DT binding to clock from soc following commit
     a2fe7baa27 ("clk: xilinx: move xlnx_vcu clock driver from soc")
   - corrected clock sequence as per xilinx device-tree generator

Signed-off-by: Rohit Visavalia <rohit.visavalia@xilinx.com>
Link: https://lore.kernel.org/r/20250107044038.100945-2-rohit.visavalia@amd.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2025-01-07 11:48:14 -08:00
Shizhao Chen
a73bca3d9c sched_ext: Add option -l in selftest runner to list all available tests
The selftest runner currently allows selecting tests via the -t
option. This patch adds a new -l option that lists all available tests,
providing users with an overview of the tests they can choose from. This
enhancement is especially useful for scripting and automation purposes,
making it easier to discover and run tests.

Signed-off-by: Shizhao Chen <shichen@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2025-01-07 09:42:30 -10:00
Stephen Boyd
83f6c3dea9 clk: renesas: Updates for v6.14 (take two)
- Add support for the RZ/G3E (R9A09G047) SoC,
   - Add Module Stop (MSTOP) support on RZ/V2H,
   - Add Image Signal Processor helper block (FCPVX and VSPX) clocks on
     R-Car V4H SoC,
   - Add System Controller (SYS) reset and Generic Interrupt Controller
     (GIC) clock and reset entries on RZ/V2H,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ31TagAKCRCKwlD9ZEnx
 cF/tAPwL4pfnnJdDPiwi+GLkUEYLlgo2nOdeqIwNu1dnGbmELQEAqHtONJHMYNsW
 +ixEdQjb3I+6HK0uQMOI111mzWyAxwo=
 =bHWA
 -----END PGP SIGNATURE-----

Merge tag 'renesas-clk-for-v6.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

  - Add support for the RZ/G3E (R9A09G047) SoC
  - Add Module Stop (MSTOP) support on RZ/V2H
  - Add Image Signal Processor helper block (FCPVX and VSPX) clocks on
    R-Car V4H SoC
  - Add System Controller (SYS) reset and Generic Interrupt Controller
    (GIC) clock and reset entries on RZ/V2H

* tag 'renesas-clk-for-v6.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  dt-bindings: clock: renesas,r9a08g045-vbattb: Fix include guard
  clk: renesas: r9a09g057: Add clock and reset entries for GIC
  clk: renesas: r9a09g057: Add reset entry for SYS
  clk: renesas: r8a779g0: Add VSPX clocks
  clk: renesas: r8a779g0: Add FCPVX clocks
  clk: renesas: r9a09g047: Add I2C clocks/resets
  clk: renesas: r9a09g047: Add CA55 core clocks
  clk: renesas: rzv2h: Add support for RZ/G3E SoC
  clk: renesas: rzv2h: Add MSTOP support
  dt-bindings: clock: renesas: Document RZ/G3E SoC CPG
  dt-bindings: soc: renesas: Document RZ/G3E SMARC SoM and Carrier-II EVK
  dt-bindings: soc: renesas: Document Renesas RZ/G3E SoC variants
2025-01-07 11:42:23 -08:00
Stephen Boyd
765ea12f8a Microchip clock updates for v6.14
This update include:
 - support for the SAMA7D65 SoC
 - clock IDs for for the slow clock controller
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZ3qS6QAKCRCejrg/N2X7
 /TB9AP4sHkmqt/fSF37cfAfRB4KhaREp+F3QGRU0k4ZUbpTRmQEA1KRSntSbegk+
 de49iMhGKabMKbhIDOGECt/kEngENQ0=
 =XycM
 -----END PGP SIGNATURE-----

Merge tag 'clk-microchip-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-microchip

Pull Microchip clk driver updates from Claudiu Beznea:

 - Support for the SAMA7D65 SoC
 - Clock IDs for for the slow clock controller

* tag 'clk-microchip-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  clk: at91: sama7d65: add sama7d65 pmc driver
  dt-bindings: clock: Add SAMA7D65 PMC compatible string
  dt-bindings: clocks: atmel,at91sam9x5-sckc: add sama7d65
  clk: at91: sckc: Use SCKC_{TD, MD}_SLCK IDs for clk32k clocks
  dt-bindings: clk: at91: Add clock IDs for the slow clock controller
2025-01-07 11:37:05 -08:00
Nikunj A Dadhania
85b60ca9ad x86/sev: Add Secure TSC support for SNP guests
Add support for Secure TSC in SNP-enabled guests. Secure TSC allows guests
to securely use RDTSC/RDTSCP instructions, ensuring that the parameters used
cannot be altered by the hypervisor once the guest is launched.

Secure TSC-enabled guests need to query TSC information from the AMD Security
Processor. This communication channel is encrypted between the AMD Security
Processor and the guest, with the hypervisor acting merely as a conduit to
deliver the guest messages to the AMD Security Processor. Each message is
protected with AEAD (AES-256 GCM).

  [ bp: Zap a stray newline over amd_cc_platform_has() while at it,
    simplify CC_ATTR_GUEST_SNP_SECURE_TSC check ]

Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250106124633.1418972-6-nikunj@amd.com
2025-01-07 20:27:23 +01:00
Joe Hattori
9164e0912a thermal: of: fix OF node leak in of_thermal_zone_find()
of_thermal_zone_find() calls of_parse_phandle_with_args(), but does not
release the OF node reference obtained by it.

Add a of_node_put() call when the call is successful.

Fixes: 3fd6d6e2b4 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://patch.msgid.link/20241224031809.950461-1-joe@pf.is.s.u-tokyo.ac.jp
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07 20:05:32 +01:00
Niravkumar L Rabara
456f3000f8 dt-bindings: soc: altera: convert socfpga-system.txt to yaml
Convert socfpga-system.txt to altr,socfpga-sys-mgr.yaml and move to
soc directory.

Add platform names in description for clarity. ARM(32-bit) platforms
Cyclone5, Arria5 and Arria10 is using "altr,sys-mgr" compatible,
while ARM64 is using "altr,sys-mgr-s10" compatible.
Removed "cpu1-start-addr" for ARM64 as it is not required.

Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Link: https://lore.kernel.org/r/20250107105129.2784203-1-niravkumar.l.rabara@intel.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-01-07 12:58:36 -06:00
Mark Brown
c51187903f
ASoC: codecs: Add aw88083 amplifier driver
Merge series from wangweidong.a@awinic.com:

Add the awinic,aw88083 property to support the aw88083 chip.

The driver is for amplifiers aw88083 of Awinic Technology
Corporation. The AW88083 is an intelligent digital audio
amplifier with low noise.
2025-01-07 18:50:45 +00:00
Mark Brown
8227c7510b
Minor debugging improvements
Merge series from Stephen Gordon <gordoste@iinet.net.au>:

Some minor tweaks to debugging for dai_links.
2025-01-07 18:50:41 +00:00
Hans de Goede
cd4a7b2e6a ACPI: resource: acpi_dev_irq_override(): Check DMI match last
acpi_dev_irq_override() gets called approx. 30 times during boot (15 legacy
IRQs * 2 override_table entries). Of these 30 calls at max 1 will match
the non DMI checks done by acpi_dev_irq_override(). The dmi_check_system()
check is by far the most expensive check done by acpi_dev_irq_override(),
make this call the last check done by acpi_dev_irq_override() so that it
will be called at max 1 time instead of 30 times.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241228165253.42584-1-hdegoede@redhat.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07 19:26:48 +01:00
Hans de Goede
7ed4e4a659 ACPI: resource: Add TongFang GM5HG0A to irq1_edge_low_force_override[]
The TongFang GM5HG0A is a TongFang barebone design which is sold under
various brand names.

The ACPI IRQ override for the keyboard IRQ must be used on these AMD Zen
laptops in order for the IRQ to work.

At least on the SKIKK Vanaheim variant the DMI product- and board-name
strings have been replaced by the OEM with "Vanaheim" so checking that
board-name contains "GM5HG0A" as is usually done for TongFang barebones
quirks does not work.

The DMI OEM strings do contain "GM5HG0A". I have looked at the dmidecode
for a few other TongFang devices and the TongFang code-name string being
in the OEM strings seems to be something which is consistently true.

Add a quirk checking one of the DMI_OEM_STRING(s) is "GM5HG0A" in the hope
that this will work for other OEM versions of the "GM5HG0A" too.

Link: https://www.skikk.eu/en/laptops/vanaheim-15-rtx-4060
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219614
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241228164845.42381-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07 19:23:05 +01:00
Hans de Goede
66d337fede ACPI: resource: Add Asus Vivobook X1504VAP to irq1_level_low_skip_override[]
Like the Vivobook X1704VAP the X1504VAP has its keyboard IRQ (1) described
as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh which
breaks the keyboard.

Add the X1504VAP to the irq1_level_low_skip_override[] quirk table to fix
this.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20241220181352.25974-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07 19:19:44 +01:00
Sunil V L
bff7165da9 ACPI: tables: Use string choice helpers
Use str_enabled_disabled string helpers for better readability and to
fix cocci warning.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202501010947.0e3GVHNa-lkp@intel.com/
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202501010947.0e3GVHNa-lkp@intel.com/
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Link: https://patch.msgid.link/20250103035122.50315-1-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-01-07 19:12:43 +01:00
Danilo Krummrich
b4aee757f1 MAINTAINERS: align Danilo's maintainer entries
Some entries use my kernel.org address, while others use my Red Hat one.

Since this is a bit of an inconvinience for me, align them to all use the
same (kernel.org) address.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241204152248.8644-1-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07 19:01:50 +01:00
Romain Sioen
deaa14ab6b ARM: dts: microchip: add support for sama7d65_curiosity board
Add device tree support for the SAMA7D65 Curiosity board.
Update the Makefile to include the new device tree file.

uart6 is related to flexcom6, hence not sorted in alphabetical order.

Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/20250107160850.120537-6-Ryan.Wanner@microchip.com
[claudiu.beznea: moved chosen node after alias for aphanumerically
 sortage, added a space in front of <PIN_PD19__FLEXCOM6_IO1> for
 alignment]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-07 19:33:17 +02:00
Ryan Wanner
261dcfad1b ARM: dts: microchip: add sama7d65 SoC DT
Add Device Tree for sama7d65 SoC.

Co-developed-by: Dharma Balasubiramani <dharma.b@microchip.com>
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Co-developed-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Co-developed-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20250107160850.120537-5-Ryan.Wanner@microchip.com
[claudiu.beznea: dropped comma typo from copyright, dropped space in
 front of slow_xtal node, dropped empty space after slow_xtal node]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
2025-01-07 19:32:55 +02:00
Jani Nikula
1513358246 drm/i915/display: convert global state to struct intel_display
Going forward, struct intel_display is the main display device
structure. Convert intel_global_state.[ch] to it.

This allows us to make intel_pmdemand.c completely independent of
i915_drv.h.

Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2b5e743b285a86a59ee87085727847c758c8d552.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-07 19:31:39 +02:00
Jani Nikula
445fc68549 drm/i915/pmdemand: convert to struct intel_display
Going forward, struct intel_display is the main display device
structure. Convert pmdemand to it.

Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c1d92e9490013d5aba50fc1d1ebc0ee18e82cf7e.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-07 19:31:39 +02:00
Jani Nikula
0a08320bfa drm/i915/pmdemand: make struct intel_pmdemand_state opaque
Only intel_pmdemand.c should look inside the struct
intel_pmdemand_state. Indeed, this is already the case. Finish the job
and make struct intel_pmdemand_state opaque, preventing any direct pokes
at the guts of it in the future.

Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bc5f418785ecd51454761e9a55f21340470a92e3.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-07 19:31:39 +02:00
Jani Nikula
eb18e25b60 drm/i915/pmdemand: convert to_intel_pmdemand_state() to a function
In preparation for making struct intel_pmdemand_state an opaque type,
convert to_intel_pmdemand_state() to a function.

Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/10324781f9f7eae5a92506aaa7a40403efd345dd.1735662324.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-01-07 19:31:38 +02:00
Yicong Yang
555c6e9b03 drivers/perf: hisi: Set correct IRQ affinity for PMUs with no association
For PMUs with no association, the hisi_pmu->on_cpu is initialized
according to the NUMA locality but use a wrong CPU for the interrupt
affinity. The CPU selected from cpumask_local_spread() can be different
from the CPU by the cpuhp callback. Fix this by setting the IRQ affinity
to hisi_pmu->on_cpu.

Fixes: 6cd137088f ("drivers/perf: hisi: Refactor the detection of associated CPUs")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241223125134.57885-1-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2025-01-07 17:17:32 +00:00
Dzmitry Sankouski
898b72fa44 clk: qcom: gcc-sdm845: Add general purpose clock ops
SDM845 has "General Purpose" clocks that can be muxed to
SoC pins to clock various external devices.
Those clocks may be used as e.g. PWM sources for external peripherals.

GPCLK can in theory have arbitrary value depending on the use case, so
the concept of frequency tables, used in rcg2 clock driver, is not
efficient, because it allows only defined frequencies.

Introduce clk_rcg2_gp_ops, which automatically calculate clock
mnd values for arbitrary clock rate. The calculation done as follows:
- upon determine rate request, we calculate m/n/pre_div as follows:
  - find parent(from our client's assigned-clock-parent) rate
  - find scaled rates by dividing rates on its greatest common divisor
  - assign requested scaled rate to m
  - factorize scaled parent rate, put multipliers to n till max value
    (determined by mnd_width)
- validate calculated values with *_width:
  - if doesn't fit, delete divisor and multiplier by 2 until fit
- return determined rate

Limitations:
- The driver doesn't select a parent clock (it may be selected by client
  in device tree with assigned-clocks, assigned-clock-parents properties)

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20241118-starqltechn_integration_upstream-v8-3-ac8e36a3aa65@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07 11:16:27 -06:00
Dzmitry Sankouski
faddad527c clk: qcom: clk-rcg2: split __clk_rcg2_configure function
__clk_rcg2_configure function does 2 things -
configures parent and mnd values. In order to
be able to add new clock options, we should split.

Move __clk_rcg2_configure logic on 2 functions:
- __clk_rcg2_configure_parent which configures clock parent
- __clk_rcg2_configure_mnd which configures mnd values

__clk_rcg2_configure delegates to mentioned functions.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20241118-starqltechn_integration_upstream-v8-2-ac8e36a3aa65@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07 11:16:00 -06:00
Dzmitry Sankouski
cef0523dd2 clk: qcom: clk-rcg2: document calc_rate function
Update calc_rate docs to reflect, that pre_div
is not pure divisor, but a register value, and requires conversion.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20241118-starqltechn_integration_upstream-v8-1-ac8e36a3aa65@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07 11:16:00 -06:00
Mark Brown
d3c7c48d00 arm64/sme: Move storage of reg_smidr to __cpuinfo_store_cpu()
In commit 892f7237b3 ("arm64: Delay initialisation of
cpuinfo_arm64::reg_{zcr,smcr}") we moved access to ZCR, SMCR and SMIDR
later in the boot process in order to ensure that we don't attempt to
interact with them if SVE or SME is disabled on the command line.
Unfortunately when initialising the boot CPU in init_cpu_features() we work
on a copy of the struct cpuinfo_arm64 for the boot CPU used only during
boot, not the percpu copy used by the sysfs code. The expectation of the
feature identification code was that the ID registers would be read in
__cpuinfo_store_cpu() and the values not modified by init_cpu_features().

The main reason for the original change was to avoid early accesses to
ZCR on practical systems that were seen shipping with SVE reported in ID
registers but traps enabled at EL3 and handled as fatal errors, SME was
rolled in due to the similarity with SVE. Since then we have removed the
early accesses to ZCR and SMCR in commits:

  abef0695f9 ("arm64/sve: Remove ZCR pseudo register from cpufeature code")
  391208485c ("arm64/sve: Remove SMCR pseudo register from cpufeature code")

so only the SMIDR_EL1 part of the change remains. Since SMIDR_EL1 is
only trapped via FEAT_IDST and not the SME trap it is less likely to be
affected by similar issues, and the factors that lead to issues with SVE
are less likely to apply to SME.

Since we have not yet seen practical SME systems that need to use a
command line override (and are only just beginning to see SME systems at
all) and the ID register read is much more likely to be safe let's just
store SMIDR_EL1 along with all the other ID register reads in
__cpuinfo_store_cpu().

This issue wasn't apparent when testing on emulated platforms that do not
report values in SMIDR_EL1.

Fixes: 892f7237b3 ("arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241217-arm64-fix-boot-cpu-smidr-v3-1-7be278a85623@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
2025-01-07 17:15:55 +00:00
Geert Uytterhoeven
574f5ee2c8 drm/bridge: ti-sn65dsi86: Fix multiple instances
Each bridge instance creates up to four auxiliary devices with different
names.  However, their IDs are always zero, causing duplicate filename
errors when a system has multiple bridges:

    sysfs: cannot create duplicate filename '/bus/auxiliary/devices/ti_sn65dsi86.gpio.0'

Fix this by using a unique instance ID per bridge instance.  The
instance ID is derived from the I2C adapter number and the bridge's I2C
address, to support multiple instances on the same bus.

Fixes: bf73537f41 ("drm/bridge: ti-sn65dsi86: Break GPIO and MIPI-to-eDP bridge into sub-drivers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7a68a0e3f927e26edca6040067fb653eb06efb79.1733840089.git.geert+renesas@glider.be
2025-01-07 09:12:50 -08:00
John Erasmus Mari Geronimo
adc52dd407 hwmon: (pmbus/adm1275) add adm1273 support
Add support for adm1273 which is similar to adm1275 and other chips
of the series.

Signed-off-by: John Erasmus Mari Geronimo <johnerasmusmari.geronimo@analog.com>
Link: https://lore.kernel.org/r/20250106131740.305988-3-johnerasmusmari.geronimo@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-07 09:08:10 -08:00
John Erasmus Mari Geronimo
2b2b62a911 dt-bindings: hwmon: adm1275: add adm1273
Add support for the adm1273 Hot-Swap Controller and Digital Power
and Energy Monitor

Signed-off-by: John Erasmus Mari Geronimo <johnerasmusmari.geronimo@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106131740.305988-2-johnerasmusmari.geronimo@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2025-01-07 09:07:35 -08:00
En-Wei Wu
bd2776e39c igc: return early when failing to read EECD register
When booting with a dock connected, the igc driver may get stuck for ~40
seconds if PCIe link is lost during initialization.

This happens because the driver access device after EECD register reads
return all F's, indicating failed reads. Consequently, hw->hw_addr is set
to NULL, which impacts subsequent rd32() reads. This leads to the driver
hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr
prevents retrieving the expected value.

To address this, a validation check and a corresponding return value
catch is added for the EECD register read result. If all F's are
returned, indicating PCIe link loss, the driver will return -ENXIO
immediately. This avoids the 40-second hang and significantly improves
boot time when using a dock with an igc NIC.

Log before the patch:
[    0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002)
[    0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity
[    1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[   43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set.
[   43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13
[   46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002)
[   46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity

Log after the patch:
[    1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002)
[    1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity
[    1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[    5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002)
[    5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity

Fixes: ab40561268 ("igc: Add NVM support")
Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07 09:01:15 -08:00
Przemyslaw Korba
6c5b989116 ice: fix incorrect PHY settings for 100 GB/s
ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
working case when using 100 GB/s cable.

This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.

To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.

Reproduction output:
ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf
ptp4l[5278.775]: master offset      12470 s2 freq  +41288 path delay -3002
ptp4l[5278.837]: master offset      10525 s2 freq  +39202 path delay -3002
ptp4l[5278.900]: master offset     -24840 s2 freq  -20130 path delay -3002
ptp4l[5278.963]: master offset      10597 s2 freq  +37908 path delay -3002
ptp4l[5279.025]: master offset       8883 s2 freq  +36031 path delay -3002
ptp4l[5279.088]: master offset       7267 s2 freq  +34151 path delay -3002
ptp4l[5279.150]: master offset       5771 s2 freq  +32316 path delay -3002
ptp4l[5279.213]: master offset       4388 s2 freq  +30526 path delay -3002
ptp4l[5279.275]: master offset     -30434 s2 freq  -28485 path delay -3002
ptp4l[5279.338]: master offset     -28041 s2 freq  -27412 path delay -3002
ptp4l[5279.400]: master offset       7870 s2 freq  +31118 path delay -3002

Fixes: 3a7496234d ("ice: implement basic E822 PTP support")
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07 09:01:15 -08:00
Arkadiusz Kubalewski
65104599b3 ice: fix max values for dpll pin phase adjust
Mask admin command returned max phase adjust value for both input and
output pins. Only 31 bits are relevant, last released data sheet wrongly
points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities
Command for reference. Fix of the datasheet itself is in progress.

Fix the min/max assignment logic, previously the value was wrongly
considered as negative value due to most significant bit being set.

Example of previous broken behavior:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
 'phase-adjust': 0,
 'phase-adjust-max': 16723,
 'phase-adjust-min': -16723,

Correct behavior with the fix:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
 'phase-adjust': 0,
 'phase-adjust-max': 2147466925,
 'phase-adjust-min': -2147466925,

[1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true

Fixes: 90e1c90750 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07 09:01:15 -08:00
Li Huafei
cbd399f78e topology: Keep the cpumask unchanged when printing cpumap
During fuzz testing, the following warning was discovered:

 different return values (15 and 11) from vsnprintf("%*pbl
 ", ...)

 test:keyward is WARNING in kvasprintf
 WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130
 Call Trace:
  kvasprintf+0x121/0x130
  kasprintf+0xa6/0xe0
  bitmap_print_to_buf+0x89/0x100
  core_siblings_list_read+0x7e/0xb0
  kernfs_file_read_iter+0x15b/0x270
  new_sync_read+0x153/0x260
  vfs_read+0x215/0x290
  ksys_read+0xb9/0x160
  do_syscall_64+0x56/0x100
  entry_SYSCALL_64_after_hwframe+0x78/0xe2

The call trace shows that kvasprintf() reported this warning during the
printing of core_siblings_list. kvasprintf() has several steps:

 (1) First, calculate the length of the resulting formatted string.

 (2) Allocate a buffer based on the returned length.

 (3) Then, perform the actual string formatting.

 (4) Check whether the lengths of the formatted strings returned in
     steps (1) and (2) are consistent.

If the core_cpumask is modified between steps (1) and (3), the lengths
obtained in these two steps may not match. Indeed our test includes cpu
hotplugging, which should modify core_cpumask while printing.

To fix this issue, cache the cpumask into a temporary variable before
calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged
during the printing process.

Fixes: bb9ec13d15 ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: stable <stable@kernel.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241114110141.94725-1-lihuafei1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-07 17:58:08 +01:00
Zhenhua Huang
9ab2601dc4 arm64: mm: Test for pmd_sect() in vmemmap_check_pmd()
Commit 2045a3b891 ("mm/sparse-vmemmap: generalise vmemmap_populate_hugepages()")
introduces the vmemmap_check_pmd() while does not verify if the entry is a
section mapping, as is already done for Loongarch & X86.
The update includes a check for pmd_sect(). Only if pmd_sect() returns true,
further vmemmap population for the addr is skipped.

Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250102074047.674156-1-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
2025-01-07 16:51:42 +00:00
Masami Hiramatsu (Google)
80c3e28528 selftests/tracing: Add hist poll() support test
Add a testcase for poll() on hist file. This introduces a helper binary
to the ftracetest, because there is no good way to reliably execute
poll() on hist file.

Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173547867935.569911.10127126796879854182.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-07 11:48:07 -05:00
Anshuman Khandual
fe2169f556 arm64/mm: Replace open encodings with PXD_TABLE_BIT
[pgd|p4d]_bad() helpers have open encodings for their respective table bits
which can be replaced with corresponding macros. This makes things clearer,
thus improving their readability as well.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20250107015529.798319-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2025-01-07 16:47:45 +00:00
Anshuman Khandual
1692265830 arm64/mm: Rename pte_mkpresent() as pte_mkvalid()
pte_present() is no longer synonymous with pte_valid() as it also tests for
pte_present_invalid() as well. Hence pte_mkpresent() is misleading, because
all that does is make an entry mapped, via setting PTE_VALID. Hence rename
the helper as pte_mkvalid() which reflects its functionality appropriately.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250107023016.829416-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2025-01-07 16:47:33 +00:00
Masami Hiramatsu (Google)
66fc6f521a tracing/hist: Support POLLPRI event for poll on histogram
Since POLLIN will not be flushed until the hist file is read, the user
needs to repeatedly read() and poll() on the hist file for monitoring the
event continuously. But the read() is somewhat redundant when the user is
only monitoring for event updates.

Add POLLPRI poll event on the hist file so the event returns when a
histogram is updated after open(), poll() or read(). Thus it is possible
to wait for the next event without having to issue a read().

Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527248770.464571.2536902137325258133.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-07 11:46:32 -05:00
Yuanfang Zhang
256e6937e4 arm64: dts: qcom: sm8650: Add coresight nodes
Add coresight components: Funnel, ETE and ETF for SM8650.

Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Link: https://lore.kernel.org/r/20250107-sm8650-cs-dt-v4-1-2113b18754ea@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-01-07 10:46:18 -06:00
Masami Hiramatsu (Google)
1bd13edbbe tracing/hist: Add poll(POLLIN) support on hist file
Add poll syscall support on the `hist` file. The Waiter will be waken
up when the histogram is updated with POLLIN.

Currently, there is no way to wait for a specific event in userspace.
So user needs to peek the `trace` periodicaly, or wait on `trace_pipe`.
But it is not a good idea to peek at the `trace` for an event that
randomly happens. And `trace_pipe` is not coming back until a page is
filled with events.

This allows a user to wait for a specific event on the `hist` file. User
can set a histogram trigger on the event which they want to monitor
and poll() on its `hist` file. Since this poll() returns POLLIN, the next
poll() will return soon unless a read() happens on that hist file.

NOTE: To read the hist file again, you must set the file offset to 0,
but just for monitoring the event, you may not need to read the
histogram.

Cc: Shuah Khan <shuah@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/173527247756.464571.14236296701625509931.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-01-07 11:44:49 -05:00
Jani Nikula
ef0a0757bb drm/i915/dp: compute config for 128b/132b SST w/o DSC
Enable basic 128b/132b SST functionality without compression. Reuse
intel_dp_mtp_tu_compute_config() to figure out the TU after we've
determined we need to use an UHBR rate.

It's slightly complicated as the M/N computation is done in different
places in MST and SST paths, so we need to avoid trashing the values
later for UHBR.

If uncompressed UHBR fails, we drop to compressed non-UHBR, which is
quite likely to fail as well. We still lack 128b/132b SST+DSC.

We need mst_master_transcoder also for 128b/132b SST. Use cpu_transcoder
directly. Enhanced framing is "don't care" for 128b/132b link.

v2: mst_master_transcoder, enhanced framing (Imre)

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/084e4e05bf25a5dd396dd391014943d42b11c88d.1735912293.git.jani.nikula@intel.com
2025-01-07 18:44:26 +02:00