We have an IPv6 routing regression with the relevant fix still
a WiP. This v2 includes a last-minute revert to avoid more
problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth: igb: fix NULL pointer dereference in ethtool loopback test
- eth: i40e: fix Jumbo Frame support after iPXE boot
- eth: macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=XjZM
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, netfilter and wireless.
We have an IPv6 routing regression with the relevant fix still a WiP.
This includes a last-minute revert to avoid more problems.
Current release - new code bugs:
- wifi: nl80211: completely disable per-link stats for now
Previous releases - regressions:
- dev_ioctl: take ops lock in hwtstamp lower paths
- netfilter:
- fix spurious set lookup failures
- fix lockdep splat due to missing annotation
- genetlink: fix genl_bind() invoking bind() after -EPERM
- phy: transfer phy_config_inband() locking responsibility to phylink
- can: xilinx_can: fix use-after-free of transmitted SKB
- hsr: fix lock warnings
- eth:
- igb: fix NULL pointer dereference in ethtool loopback test
- i40e: fix Jumbo Frame support after iPXE boot
- macsec: sync features on RTM_NEWLINK
Previous releases - always broken:
- tunnels: reset the GSO metadata before reusing the skb
- mptcp: make sync_socket_options propagate SOCK_KEEPOPEN
- can: j1939: implement NETDEV_UNREGISTER notification hanidler
- wifi: ath12k: fix WMI TLV header misalignment"
* tag 'net-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"
hsr: hold rcu and dev lock for hsr_get_port_ndev
hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsr
hsr: use rtnl lock when iterating over ports
wifi: nl80211: completely disable per-link stats for now
net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups
net: ethtool: fix wrong type used in struct kernel_ethtool_ts_info
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
...
- ptep_modify_prot_start() may be called in a loop, which might lead
to the preempt_count overflow due to the unnecessary preemption
disabling. Do not disable preemption to prevent the overflow
- Events of type PERF_TYPE_HARDWARE are not tested for sampling and
return -EOPNOTSUPP eventually. Instead, deny all sampling events by
CPUMF counter facility and return -ENOENT to allow other PMUs to be
tried
- The PAI PMU driver returns -EINVAL if an event out of its range.
That aborts a search for an alternative PMU driver. Instead, return
-ENOENT to allow other PMUs to be tried
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaMLF8hccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8IB/AP9qreFJZBVctpXAlwa+ZEE+ne07
0nWtan8mP/GpdTvx7gD+LhsJwYtmWUO6RWUOcQP2wJg+AZDJUp8c+A2M0eAn+w8=
=F/H0
-----END PGP SIGNATURE-----
Merge tag 's390-6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- ptep_modify_prot_start() may be called in a loop, which might lead to
the preempt_count overflow due to the unnecessary preemption
disabling. Do not disable preemption to prevent the overflow
- Events of type PERF_TYPE_HARDWARE are not tested for sampling and
return -EOPNOTSUPP eventually.
Instead, deny all sampling events by CPUMF counter facility and
return -ENOENT to allow other PMUs to be tried
- The PAI PMU driver returns -EINVAL if an event out of its range. That
aborts a search for an alternative PMU driver.
Instead, return -ENOENT to allow other PMUs to be tried
* tag 's390-6.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpum_cf: Deny all sampling events by counter PMU
s390/pai: Deny all events not handled by this PMU
s390/mm: Prevent possible preempt_count overflow
Repeatedly marking the same eraseblock bad inflates
mtd->ecc_stats.badblocks because mtd_block_markbad() unconditionally
increments the counter on success, while some implementations (e.g.
NAND) return 0 both when the block was already bad and when it has just
been marked[1].
Fix by checking if the block is already bad before calling
->_block_markbad() when _block_isbad is available. Only skip the counter
increment when we can confirm the block was already bad. In all other
cases continue incrementing the counter.
This keeps the logic centralized in mtdcore without requiring driver
changes.
Link: https://lore.kernel.org/all/ef573188-9815-4a6b-bad1-3d8ff7c9b16f@huaweicloud.com/ [1]
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Remove array_size() calls and replace vmalloc(array_size()) with
vmalloc_array() and vzalloc(array_size()) with vcalloc() to simplify
the code.
Compile-tested only.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add two new debugfs files which allows to determine the OOB layout
used by a given MTD device. This can be useful to verify the current
layout during driver development without adding extra debug code.
The exposed information also makes it easier to analyze NAND dumps
without the need of crawling out the layout from the driver code.
The content of the new debugfs files is similar to this:
# cat /sys/kernel/debug/mtd/mtd0/ooblayout_ecc
0 0 49
1 65 63
# cat /sys/kernel/debug/mtd/mtd0/ooblayout_free
0 49 16
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
There is an extraneous space before a newline in a handful of printk
messages. Remove the spaces.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
There is a extraneous space before a newline in a pr_debug message.
Remove the space and remove a space after ( and before literal string
to clean up checkpatch warning.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The mb() macro is used in this header:
In file included from include/linux/mtd/qinfo.h:5,
from include/linux/mtd/pfow.h:8,
from drivers/mtd/lpddr/lpddr_cmds.c:14:
include/linux/mtd/map.h: In function 'inline_map_write':
include/linux/mtd/map.h:428:9: error: implicit declaration of function 'mb' [-Wimplicit-function-declaration]
Fixes: 56eb7c13b9 ("mtd: map: Don't use "proxy" headers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tegra264 has 17 generic I2C controllers, two of which are in always-on
partition of the SoC. In addition to the features supported by Tegra194
it also supports a SW mutex register to allow sharing the same I2C
instance across multiple firmware.
Document compatible string "nvidia,tegra264-i2c" for Tegra264 I2C.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use devm_mutex_init() instead of hand-writing it.
This saves some LoC, improves readability and saves some space in the
generated .o file.
Before:
======
text data bss dec hex filename
20011 6752 128 26891 690b drivers/leds/leds-is31fl319x.o
After:
=====
text data bss dec hex filename
19715 6680 128 26523 679b drivers/leds/leds-is31fl319x.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/267aba6eab12be67c297fcd52fcf45a0856338bb.1757240150.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lee Jones <lee@kernel.org>
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot() that
was removed incorrectly during the 6.16 development cycle (Rafael
Wysocki)
- Introduce a function for registering a perf domain without triggering
a system-wide CPU capacity update and make the intel_pstate driver
use it to avoid reocurring unsuccessful attempts to update capacities
of all CPUs in the system (Rafael Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario Limonciello)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjCw/YSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1SP8H/3O8D4ZFg7CxwuTn5MofPH5BBAg3FkwB
RhXZ3WA/qjz+0CusYBJO3hsJVIfUrDUzow47zi0H4tbdqqdI7CUbOPoWnGt/N2hd
ngxL4m+t91XkngLi0eOorxFPQ1/dA1p0g5BHXrzVpuMdE94V3gxb92g3SPrvjcAF
N6fVCL3RMQqDwl5ZbadvWfXdE+07nxwogKTF/NKa+DF3SHSy3SOznKgn/AlhQEo3
RKqAhaO3+RxzfTn8M0ie/flYUFApkMbdLdxYau2Lg4Ne3MhrID3ljhssGEFaQdQ0
8z3OGmfOOOLu21F1iYaZiWWXc8wB6v47NchJvuU1FF/JQ+uXdsZZdNA=
=ZGx1
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a nasty hibernation regression introduced during the 6.16
cycle, an issue related to energy model management occurring on Intel
hybrid systems where some CPUs are offline to start with, and two
regressions in the amd-pstate driver:
- Restore a pm_restrict_gfp_mask() call in hibernation_snapshot()
that was removed incorrectly during the 6.16 development cycle
(Rafael Wysocki)
- Introduce a function for registering a perf domain without
triggering a system-wide CPU capacity update and make the
intel_pstate driver use it to avoid reocurring unsuccessful
attempts to update capacities of all CPUs in the system (Rafael
Wysocki)
- Fix setting of CPPC.min_perf in the active mode with performance
governor in the amd-pstate driver to restore its expected behavior
changed recently (Gautham Shenoy)
- Avoid mistakenly setting EPP to 0 in the amd-pstate driver after
system resume as a result of recent code changes (Mario
Limonciello)"
* tag 'pm-6.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
PM: EM: Add function for registering a PD without capacity update
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after resume
cpufreq/amd-pstate: Fix setting of CPPC.min_perf in active mode for performance governor
After a recent change that started using FIELD_GET() in tps6594-core.c,
there is an error when bitfield.h is not implicitly included, such as
when building allmodconfig for ARCH=hexagon:
drivers/mfd/tps6594-core.c:767:7: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
767 | if (FIELD_GET(TPS65224_MASK_EN_PB_VSENSE_CONFIG, pwr_on) == TPS65224_EN_SEL_PB ||
| ^
Explicitly include bitfield.h to resolve the errors.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: d766ca01c2 ("mfd: tps6594: Add power button functionality")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202509032356.LGa5hygM-lkp@intel.com/
Link: https://lore.kernel.org/r/20250904-mfd-tps6594-core-fix-bitfield-h-v1-1-5d0f00cfe58f@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XrCl
-----END PGP SIGNATURE-----
Merge tag 'for-6.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix delayed inode tracking in xarray, eviction can race with
insertion and leave behind a disconnected inode
- on systems with large page (64K) and small block size (4K) fix
compression read that can return partially filled folio
- slightly relax compression option format for backward compatibility,
allow to specify level for LZO although there's only one
- fix simple quota accounting of compressed extents
- validate minimum device size in 'device add'
- update maintainers' entry
* tag 'for-6.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't allow adding block device of less than 1 MB
MAINTAINERS: update btrfs entry
btrfs: fix subvolume deletion lockup caused by inodes xarray race
btrfs: fix corruption reading compressed range when block size is smaller than page size
btrfs: accept and ignore compression level for lzo
btrfs: fix squota compressed stats leak
Rectify the reference of i915 to Xe in a comment.
v2: Cosmetic changes. (Karthik)
v3: Rephrased the commit message. (Karthik)
Signed-off-by: Varun Gupta <varun.gupta@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Link: https://lore.kernel.org/r/20250911111712.811524-1-varun.gupta@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add support for the boost regulator found in the Texas Instruments
BQ25703. The boost regulator is capable of outputting between 4.48
and 20.8 volts and between 0 and 6.35 amps.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250904160530.66178-5-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Currently, x86, Riscv and Loongarch use the generic entry code, which
makes maintainer's work easier and code more elegant. Start converting
arm64 to use the generic entry infrastructure from kernel/entry/* by
switching it to generic IRQ entry, which removes 100+ lines of duplicate
code. arm64 will completely switch to generic entry in a later series.
The changes are below:
- Remove *enter_from/exit_to_kernel_mode(), and wrap with generic
irqentry_enter/exit() as their code and functionality are almost
identical.
- Define ARCH_EXIT_TO_USER_MODE_WORK and implement
arch_exit_to_user_mode_work() to check arm64-specific thread flags
"_TIF_MTE_ASYNC_FAULT" and "_TIF_FOREIGN_FPSTATE".
So also remove *enter_from/exit_to_user_mode(), and wrap with
generic enter_from/exit_to_user_mode() because they are
exactly the same.
- Remove arm64_enter/exit_nmi() and use generic irqentry_nmi_enter/exit()
because they're exactly the same, so the temporary arm64 version
irqentry_state can also be removed.
- Remove PREEMPT_DYNAMIC code, as generic irqentry_exit_cond_resched()
has the same functionality.
- Implement arch_irqentry_exit_need_resched() with
arm64_preempt_schedule_irq() for arm64 which will allow arm64 to do
its architecture specific checks.
Tested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The arm64 entry code only preempts a kernel context upon a return from
a regular IRQ exception. The generic entry code may preempt a kernel
context for any exception return where irqentry_exit() is used, and so
may preempt other exceptions such as faults.
In preparation for moving arm64 over to the generic entry code, align
arm64 with the generic behaviour by calling
arm64_preempt_schedule_irq() from exit_to_kernel_mode(). To make this
possible, arm64_preempt_schedule_irq()
and dynamic/raw_irqentry_exit_cond_resched() are moved earlier in
the file, with no changes.
As Mark pointed out, this change will have the following 2 key impact:
- " We'll preempt even without taking a "real" interrupt. That
shouldn't result in preemption that wasn't possible before,
but it does change the probability of preempting at certain points,
and might have a performance impact, so probably warrants a
benchmark."
- " We will not preempt when taking interrupts from a region of kernel
code where IRQs are enabled but RCU is not watching, matching the
behaviour of the generic entry code.
This has the potential to introduce livelock if we can ever have a
screaming interrupt in such a region, so we'll need to go figure out
whether that's actually a problem.
Having this as a separate patch will make it easier to test/bisect
for that specifically."
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
To align the structure of the code with irqentry_exit_cond_resched()
from the generic entry code, hoist the need_irq_preemption()
and IS_ENABLED() check earlier. And different preemption check functions
are defined based on whether dynamic preemption is enabled.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Compared to the generic entry code, ARM64 does additional checks
when deciding to reschedule on return from interrupt. So introduce
arch_irqentry_exit_need_resched() in the need_resched()
condition of the generic raw_irqentry_exit_cond_resched(), with
a NOP default. This will allow ARM64 to implement the architecture
specific version for switching over to the generic entry code.
Suggested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Kevin Brodsky <kevin.brodsky@arm.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The generic entry code uses preempt_count() and need_resched() helpers to
check if it should do preempt_schedule_irq(). Currently, arm64 use its own
check logic, that is "READ_ONCE(current_thread_info()->preempt_count == 0",
which is equivalent to "preempt_count() == 0 && need_resched()".
In preparation for moving arm64 over to the generic entry code, use
these helpers to replace arm64's own code and move it ahead.
No functional changes.
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The generic entry code has the form:
| raw_irqentry_exit_cond_resched()
| {
| if (!preempt_count()) {
| ...
| if (need_resched())
| preempt_schedule_irq();
| }
| }
In preparation for moving arm64 over to the generic entry code, align
the structure of the arm64 code with raw_irqentry_exit_cond_resched() from
the generic entry code.
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The generic entry code uses irqentry_state_t to track lockdep and RCU
state across exception entry and return. For historical reasons, arm64
embeds similar fields within its pt_regs structure.
In preparation for moving arm64 over to the generic entry code, pull
these fields out of arm64's pt_regs, and use a separate structure,
matching the style of the generic entry code.
No functional changes.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The generic entry code expects architecture code to provide
regs_irqs_disabled(regs) function, but arm64 does not have this and
provides interrupts_enabled(regs), which has the opposite polarity.
In preparation for moving arm64 over to the generic entry code,
relace arm64's interrupts_enabled() with regs_irqs_disabled() and
update its callers under arch/arm64.
For the moment, a definition of interrupts_enabled() is provided for
the GICv3 driver. Once arch/arm implement regs_irqs_disabled(), this
can be removed.
Delete the fast_interrupts_enabled() macro as it is unused and we
don't want any new users to show up.
No functional changes.
Reviewed-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add support for the charger function of the BQ257XX. The device is
capable of charging batteries with a layout of 1 to 4 cells in
series.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250904160530.66178-4-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Texas Instruments BQ25703A is an integrated charger manager and
boost converter.
The MFD driver initializes the device for the regulator driver
and power supply driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250904160530.66178-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Document the Texas instruments BQ25703A series of charger managers/
buck/boost regulators.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250904160530.66178-2-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
-----BEGIN PGP SIGNATURE-----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=09/9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
"A number of fixes accumulated due to summer vacations
- Fix out-of-bounds dynptr write in bpf_crypto_crypt() kfunc which
was misidentified as a security issue (Daniel Borkmann)
- Update the list of BPF selftests maintainers (Eduard Zingerman)
- Fix selftests warnings with icecc compiler (Ilya Leoshkevich)
- Disable XDP/cpumap direct return optimization (Jesper Dangaard
Brouer)
- Fix unexpected get_helper_proto() result in unusual configuration
BPF_SYSCALL=y and BPF_EVENTS=n (Jiri Olsa)
- Allow fallback to interpreter when JIT support is limited (KaFai
Wan)
- Fix rqspinlock and choose trylock fallback for NMI waiters. Pick
the simplest fix. More involved fix is targeted bpf-next (Kumar
Kartikeya Dwivedi)
- Fix cleanup when tcp_bpf_send_verdict() fails to allocate
psock->cork (Kuniyuki Iwashima)
- Disallow bpf_timer in PREEMPT_RT for now. Proper solution is being
discussed for bpf-next. (Leon Hwang)
- Fix XSK cq descriptor production (Maciej Fijalkowski)
- Tell memcg to use allow_spinning=false path in bpf_timer_init() to
avoid lockup in cgroup_file_notify() (Peilin Ye)
- Fix bpf_strnstr() to handle suffix match cases (Rong Tao)"
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Skip timer cases when bpf_timer is not supported
bpf: Reject bpf_timer for PREEMPT_RT
tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork.
bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()
bpf: Allow fall back to interpreter for programs with stack size <= 512
rqspinlock: Choose trylock fallback for NMI waiters
xsk: Fix immature cq descriptor production
bpf: Update the list of BPF selftests maintainers
selftests/bpf: Add tests for bpf_strnstr
selftests/bpf: Fix "expression result unused" warnings with icecc
bpf: Fix bpf_strnstr() to handle suffix match cases better
selftests/bpf: Extend crypto_sanity selftest with invalid dst buffer
bpf: Fix out-of-bounds dynptr write in bpf_crypto_crypt
bpf: Check the helper function is valid in get_helper_proto
bpf, cpumap: Disable page_pool direct xdp_return need larger scope
This is to make it easier to debug issues with AV software, which time and
again deadlocks with no indication of where the issue comes from, and the
kernel being blamed for the deadlock. Then we need to analyze dumps to
prove that the kernel is not in fact at fault.
The deadlock comes from recursion: handling the event triggers another
permission event, in some roundabout way, obviously, otherwise it would
have been found in testing.
With this patch a warning is printed when permission event is received by
userspace but not answered for more than the timeout specified in
/proc/sys/fs/fanotify/watchdog_timeout. The watchdog can be turned off by
setting the timeout to zero (which is the default).
The timeout is very coarse (T <= t < 2T) but I guess it's good enough for
the purpose.
Overhead should be minimal.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20250909143053.112171-1-mszeredi@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
The gen_sysreg.awk script processes the system register specification in
the sysreg text file to generate C macro definitions. The current script
will silently accept certain errors in the specification file, leading
to incorrect header generation.
For example, a Sysreg or SysregFields can be accidentally duplicated,
causing its macros to be emitted twice. An Enum can contain duplicate
values for different items, which is architecturally incorrect.
Add checks to catch these errors at build time. The script now tracks
all seen Sysreg and SysregFields definitions and checks for duplicates.
It also tracks values within each Enum block to ensure entries are
unique.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The `ID_AA64MMFR4_EL1.EIESB` field, is an unsigned enumeration, but was
incorrectly defined as a `SignedEnum` when introduced in commit
cfc680bb04 ("arm64: sysreg: Add layout for ID_AA64MMFR4_EL1"). This is
corrected to `UnsignedEnum`.
Conversely, the `ID_AA64DFR0_EL1.DoubleLock` field, is a signed
enumeration, but was incorrectly defined as an `UnsignedEnum`. This is
corrected to `SignedEnum`, which wasn't correctly set when annotated as
such in commit ad16d4cf0b ("arm64/sysreg: Initial unsigned annotations
for ID registers").
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Fix the value of ID_PFR1_EL1.Security NSACR_RFR to be 0b0010, as per
DDI0601/2025-06, which wasn't correctly set when introduced in commit
1224308075 ("arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation").
While at it, remove redundant definitions of CPACR_EL12 and
RCWSMASK_EL1 and fix some typos.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
tcp reject code won't reply to a tcp reset.
But the icmp reject 'netdev' family versions will reply to icmp
dst-unreach errors, unlike icmp_send() and icmp6_send() which are used
by the inet family implementation (and internally by the REJECT target).
Check for the icmp(6) type and do not respond if its an unreachable error.
Without this, something like 'ip protocol icmp reject', when used
in a netdev chain attached to 'lo', cause a packet loop.
Same for two hosts that both use such a rule: each error packet
will be replied to.
Such situation persist until the (bogus) rule is amended to ratelimit or
checks the icmp type before the reject statement.
As the inet versions don't do this make the netdev ones follow along.
Signed-off-by: Florian Westphal <fw@strlen.de>
KCSAN reported a data-race on the `ipvs->enable` flag, which is
written in the control path and read concurrently from many other
contexts.
Following a suggestion by Julian, this patch fixes the race by
converting all accesses to use `WRITE_ONCE()/READ_ONCE()`.
This lightweight approach ensures atomic access and acts as a
compiler barrier, preventing unsafe optimizations where the flag
is checked in loops (e.g., in ip_vs_est.c).
Additionally, the `enable` checks in the fast-path hooks
(`ip_vs_in_hook`, `ip_vs_out_hook`, `ip_vs_forward_icmp`) are
removed. These are unnecessary since commit 857ca89711
("ipvs: register hooks only with services"). The `enable=0`
condition they check for can only occur in two rare and non-fatal
scenarios: 1) after hooks are registered but before the flag is set,
and 2) after hooks are unregistered on cleanup_net. In the worst
case, a single packet might be mishandled (e.g., dropped), which
does not lead to a system crash or data corruption. Adding a check
in the performance-critical fast-path to handle this harmless
condition is not a worthwhile trade-off.
Fixes: 857ca89711 ("ipvs: register hooks only with services")
Reported-by: syzbot+1651b5234028c294c339@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1651b5234028c294c339
Suggested-by: Julian Anastasov <ja@ssi.bg>
Link: https://lore.kernel.org/lvs-devel/2189fc62-e51e-78c9-d1de-d35b8e3657e3@ssi.bg/
Signed-off-by: Zhang Tengfei <zhtfdev@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Expose the input bridge interface ethernet address so it can be used to
redirect the packet to the receiving physical device for processing.
Tested with nft command line tool.
table bridge nat {
chain PREROUTING {
type filter hook prerouting priority 0; policy accept;
ether daddr de:ad:00:00:be:ef meta pkttype set host ether daddr set meta ibrhwdr accept
}
}
Joint work with Pablo Neira.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Since the ahash_region() macro was redefined to calculate the region
index solely from HTABLE_REGION_BITS, the htable_bits parameter became
unused.
Remove the unused htable_bits argument and its call sites, simplifying
the code without changing semantics.
Fixes: 8478a729c0 ("netfilter: ipset: fix region locking in hash types")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
The gt24c256c is another 24c256 compatible EEPROM, and does not
follow the generic name matching, so add a separate compatible for it.
This ensures accurate device-tree representation and enables proper
kernel support for systems using this part.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250908-lemans-evk-bu-v4-5-5c319c696a7d@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The SPDIF receiver/transmitter can be connected to a DAI device via OF
graph port. It is already in use and supported.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250910233615.775397-2-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Texas Instruments PCM1754[1] is a simple stereo DAC without any
digital
management interface but soft mute, PCM input format and 44.1 kHz
digital de-emphasis can be configured via strapping pins. Only soft mute
and PCM input format selection is currently exposed via optional GPIOs
in the driver.
[1]: https://www.ti.com/product/PCM1754
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Co-developed-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Link: https://patch.msgid.link/20250910-v6-12-topic-pcm1754-v2-2-0917dbe73c65@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The Texas Instruments PCM1754 is a simple stereo DAC without any digital
management interface but soft mute, PCM input format and 44.1 kHz
digital de-emphasis can be configured via strapping pins. Only soft mute
and PCM input format selection is currently exposed via optional GPIOs
in the driver.
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250910-v6-12-topic-pcm1754-v2-1-0917dbe73c65@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
GuC has an interface to set a power profile for the SLPC algorithm.
Base mode is default and ensures a balanced performance, power_saving
mode has conservative up/down thresholds and is suitable for use with
apps that typically need to be power efficient. This will result in
lower GT frequencies, thus consuming lower power.
Selected power profile will be displayed in this format:
$ cat power_profile
[base] power_saving
$ echo power_saving > power_profile
$ cat power_profile
base [power_saving]
v2: Address review comments (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250903232120.390190-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Merge a hibernation regression fix and an fix related to energy model
management for 6.17-rc6
* pm-sleep:
PM: hibernate: Restrict GFP mask in hibernation_snapshot()
* pm-em:
PM: EM: Add function for registering a PD without capacity update
Add a Rust driver for ARM Mali CSF-based GPUs. It is a port of Panthor
and therefore exposes Panthor's uAPI and name to userspace, and the
product of a joint effort between Collabora, Arm and Google engineers.
The aim is to incrementally develop Tyr with the abstractions that are
currently available until it is consider to be in parity with Panthor
feature-wise.
The development of Tyr itself started in January, after a few failed
attempts of converting Panthor piecewise through a mix of Rust and C
code. There is a downstream branch that's much further ahead in terms of
capabilities than this initial patch.
The downstream code is capable of booting the MCU, doing sync VM_BINDS
through the work-in-progress GPUVM abstraction and also doing (trivial)
submits through Asahi's drm_scheduler and dma_fence abstractions. So
basically, most of what one would expect a modern GPU driver to do,
except for power management and some other very important adjacent
pieces. It is not at the point where submits can correctly deal with
dependencies, or at the point where it can rotate access to the GPU
hardware fairly through a software scheduler, but that is simply a
matter of writing more code.
This first patch, however, only implements a subset of the current
features available downstream, as the rest is not implementable without
pulling in even more abstractions. In particular, a lot of things depend
on properly mapping memory on a given VA range, which itself depends on
the GPUVM abstraction that is currently work-in-progress. For this
reason, we still cannot boot the MCU and thus, cannot do much for the
moment.
This constitutes a change in the overall strategy that we have been
using to develop Tyr so far. By submitting small parts of the driver
upstream iteratively, we aim to:
a) evolve together with Nova and rvkms, hopefully reducing regressions
due to upstream changes (that may break us because we were not there, in
the first place)
b) prove any work-in-progress abstractions by having them run on a real
driver and hardware and,
c) provide a reason to work on and review said abstractions by providing
a user, which would be tyr itself.
Despite its limited feature-set, we offer IGT tests. It is only tested
on the rk3588, so any other SoC is probably not going to work at all for
now.
The skeleton is basically taken from Nova and also
rust_platform_driver.rs.
Lastly, the name "Tyr" is inspired by Norse mythology, reflecting ARM's
tradition of naming their GPUs after Nordic mythological figures and
places.
Co-developed-by: Beata Michalska <beata.michalska@arm.com>
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Co-developed-by: Carsten Haitzler <carsten.haitzler@foss.arm.com>
Signed-off-by: Carsten Haitzler <carsten.haitzler@foss.arm.com>
Co-developed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://www.collabora.com/news-and-blog/news-and-events/introducing-tyr-a-new-rust-drm-driver.html
Signed-off-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
[aliceryhl: minor Kconfig update on apply]
[aliceryhl: s/drm::device::/drm::/]
Link: https://lore.kernel.org/r/20250910-tyr-v3-1-dba3bc2ae623@collabora.com
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
1. Correct missing interrupts in IMX 1-Wire Devicetree bindings.
2. Drop old, dead code from Matrox driver.
-----BEGIN PGP SIGNATURE-----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=V4Gk
-----END PGP SIGNATURE-----
Merge tag 'w1-drv-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1 into char-misc-next
Krzysztof writes:
1-Wire bus drivers for v6.18
1. Correct missing interrupts in IMX 1-Wire Devicetree bindings.
2. Drop old, dead code from Matrox driver.
* tag 'w1-drv-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: matrox: Remove some deadcode in matrox_w1_remove()
dt-bindings: w1: imx: Add an entry for the interrupts property
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rmobile-sysc PM
domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rcar-gen4-sysc PM
domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The recent changes to genpd makes a genpd OF provider that is powered-on at
initialization to stay powered-on, until the ->sync_state() callback is
invoked for it.
This may not happen at all, if we wait for a consumer device to be probed,
leading to wasting energy. There are ways to enforce the ->sync_state()
callback to be invoked, through sysfs or via the probe-defer-timeout, but
none of them in its current form are a good fit for rcar-sysc PM domains.
Let's therefore opt-out from this behaviour of genpd for now, by using the
GENPD_FLAG_NO_STAY_ON.
Link: https://lore.kernel.org/all/20250701114733.636510-1-ulf.hansson@linaro.org/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 0e789b491b ("pmdomain: core: Leave powered-on genpds on until sync_state")
Fixes: 13a4b7fb62 ("pmdomain: core: Leave powered-on genpds on until late_initcall_sync")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
