Enable Lunar Lake platforms to achieve PMC information from
Intel PMC SSRAM Telemetry driver and substate requirements data
from telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250910210629.11198-2-xi.pardee@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch adds debug logging capabilities to monitor early pending
requests and their associated custom BIOS inputs during runtime.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Call the amd_pmf_invoke_cmd_enact() function to manage early pending
requests and their associated custom BIOS inputs. Add a return statement
for cases of failure.
The PMF driver will adjust power settings according to custom BIOS inputs
after assessing the policy conditions.
Also, add a new common routine amd_pmf_handle_early_preq() to handle early
BIOS pending requests for both v1 and v2 variants.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-9-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current code fails to send multiple BIOS input data to the PMF-TA
for policy condition evaluation. Only the most recent BIOS input data is
properly sent to the PMF-TA, while previous inputs are overwritten with
the zeros.
To address this issue, the BIOS input data should be stored and passed on
to the PMF-TA.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-8-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The PMF ACPI Specification (APMF) has been revised to version 1.3 to allow
for additional custom BIOS inputs, enabling OEMs to have more precise
thermal management of the system. This update includes adding support to
the driver using the new data structure received from the BIOS through the
existing APMF interfaces.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-7-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Implement a helper function to check if BIOS input notifications are
enabled or disabled.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-6-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The latest PMF TA has been updated with the additional structure members
for internal evaluation. Since this same structure is utilized in the
driver, it also needs to be updated on the driver side. Otherwise, there
will be a mismatch in the byte sizes when copying data from shared memory.
Suggested-by: Yijun Shen <Yijun.Shen@dell.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-5-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The existing amd_pmf driver is limited to supporting just two custom BIOS
inputs. However, with the updates to the latest PMF TA, there's a
requirement to broaden this capacity to handle 10 inputs, aligning with
the TA firmware's capabilities.
The necessary logic should be implemented to facilitate this expansion of
functionality.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-4-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Originally, the 'amd_pmf_get_custom_bios_inputs()' function was written
under the assumption that the BIOS would only send a single pending
request for the driver to process. However, following OEM enablement, it
became clear that multiple pending requests for custom BIOS inputs might
be sent at the same time, a scenario that the current code logic does not
support when it comes to handling multiple custom BIOS inputs.
To address this, the code logic needs to be improved to not only manage
multiple simultaneous custom BIOS inputs but also to ensure it is scalable
for future additional inputs.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The most recent PMF Trusted Application includes enhanced features that
allow for modifications to PMF thermal parameters such as PPT and PPT APU.
This update introduces the necessary driver support to utilize these
capabilities.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20250901110140.2519072-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
TQMa91xx series is using NXP i.MX91 CPU on an LGA or socketable type board.
MBa91xxCA is a starterkit base board for TQMa91xx on an adapter board.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Allow clocks and clock-names to match existed dts file.
'hsrun_divcore' should be 'hsrun-divcore'. But use '_' to keep old dts back
compatible.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx7ulp-com.dtb: clock-controller@40410000 (fsl,imx7ulp-smc1): '#clock-cells', 'clock-names', 'clocks' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/arm/freescale/fsl,imx7ulp-pm.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add bindings for SolidRun i.MX8M Plus System on Module based boards:
- CuBox-M is a complete produc with enclosure including the SoM
- HummingBoard Mate/Pro/Pulse/Ripple are evaluation boards with common
design but different available interfaces.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After commit 8cc71fc3b8 ("wifi: cfg80211: Fix "no buffer
space available" error in nl80211_get_station() for MLO"),
the per-link data is only included in station dumps, where
the size limit is somewhat less of an issue. However, it's
still an issue, depending on how many links a station has
and how much per-link data there is. Thus, for now, disable
per-link statistics entirely.
A complete fix will need to take this into account, make it
opt-in by userspace, and change the dump format to be able
to split a single station's data across multiple netlink
dump messages, which all together is too much development
for a fix.
Fixes: 82d7f841d9 ("wifi: cfg80211: extend to embed link level statistics in NL message")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change "ret" from u8 to int type in redrat3_enable_detector() to store
negative error codes or zero returned by redrat3_send_cmd() and
usb_submit_urb() - this better aligns with the coding standards and
maintains code consistency.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Syzbot reports a KASAN issue as below:
BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline]
BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465
CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__create_pipe include/linux/usb.h:1945 [inline]
send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991
vfs_write+0x2d7/0xdd0 fs/read_write.c:576
ksys_write+0x127/0x250 fs/read_write.c:631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The iMON driver improperly releases the usb_device reference in
imon_disconnect without coordinating with active users of the
device.
Specifically, the fields usbdev_intf0 and usbdev_intf1 are not
protected by the users counter (ictx->users). During probe,
imon_init_intf0 or imon_init_intf1 increments the usb_device
reference count depending on the interface. However, during
disconnect, usb_put_dev is called unconditionally, regardless of
actual usage.
As a result, if vfd_write or other operations are still in
progress after disconnect, this can lead to a use-after-free of
the usb_device pointer.
Thread 1 vfd_write Thread 2 imon_disconnect
...
if
usb_put_dev(ictx->usbdev_intf0)
else
usb_put_dev(ictx->usbdev_intf1)
...
while
send_packet
if
pipe = usb_sndintpipe(
ictx->usbdev_intf0) UAF
else
pipe = usb_sndctrlpipe(
ictx->usbdev_intf0, 0) UAF
Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by
checking ictx->disconnected in all writer paths. Add early return
with -ENODEV in send_packet(), vfd_write(), lcd_write() and
display_open() if the device is no longer present.
Set and read ictx->disconnected under ictx->lock to ensure memory
synchronization. Acquire the lock in imon_disconnect() before setting
the flag to synchronize with any ongoing operations.
Ensure writers exit early and safely after disconnect before the USB
core proceeds with cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+f1a69784f6efe748c3bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f1a69784f6efe748c3bf
Fixes: 21677cfc56 ("V4L/DVB: ir-core: add imon driver")
Cc: stable@vger.kernel.org
Signed-off-by: Larshin Sergey <Sergey.Larshin@kaspersky.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
clang warned about two uninitialized variables used as return
values in the exhaustive eviction series.
Fix those.
Fixes: 1f1541720f ("drm/xe: Rework instances of variants of xe_bo_create_locked()")
Fixes: 7bcb6e38c1 ("drm/xe/display: Convert __xe_pin_fb_vma()")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250910151128.49693-1-thomas.hellstrom@linux.intel.com
The driver inserts a VLAN header into RoCE packets when the
traffic was untagged by modifying the existing GID entries.
This has caused the firmware to enforce only VLAN-based
priority mappings, ignoring other valid priority configurations
set via APP TLVs (e.g., DSCP selectors).
Driver now has support for selecting the service level (vlan id)
and traffic class (dscp) during modify_qp. So no need to override
the priority update using the update gid method. Hence removing
the code that handles the above operation.
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Link: https://patch.msgid.link/20250908094516.18222-3-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Updated the existing sysfs entries with correct data.
This change is to align the behavior with our OOB driver.
Added "board_id" sysfs entry which will provide the
VPD Part number, if exists.
Signed-off-by: Anantha Prabhu <anantha.prabhu@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250908094516.18222-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add ionic to the kernel build environment.
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-15-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement idbdev ops for device and port information.
Co-developed-by: Andrew Boyer <andrew.boyer@amd.com>
Signed-off-by: Andrew Boyer <andrew.boyer@amd.com>
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-13-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement device supported verb APIs for control path.
Co-developed-by: Andrew Boyer <andrew.boyer@amd.com>
Signed-off-by: Andrew Boyer <andrew.boyer@amd.com>
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-11-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Setup RDMA admin queues using device command exposed over
auxiliary device and manage these queues using ida.
Co-developed-by: Andrew Boyer <andrew.boyer@amd.com>
Signed-off-by: Andrew Boyer <andrew.boyer@amd.com>
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-10-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The RDMA device needs information of controller memory bar and
doorbell capability to share with user context. Discover CMB regions
and express doorbell capabilities on device init.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Co-developed-by: Pablo Cascón <pablo.cascon@amd.com>
Signed-off-by: Pablo Cascón <pablo.cascon@amd.com>
Co-developed-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-7-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA driver needs an interrupt for an event queue. Export
function from net driver to allocate an interrupt.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-6-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The Ethernet driver holds the privilege to execute the device commands.
Export the function to execute RDMA reset command for use by RDMA driver.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-5-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
RDMA driver needs to establish admin queues to support admin operations.
Export the APIs to send device commands for the RDMA driver.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-4-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Firmware sends the RDMA capability in a response for LIF_IDENTIFY
device command. Update the LIF indentify with additional RDMA
capabilities used by driver and firmware.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-3-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
To support RDMA capable ethernet device, create an auxiliary device in
the ionic Ethernet driver. The RDMA device is modeled as an auxiliary
device to the Ethernet device.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Link: https://patch.msgid.link/20250903061606.4139957-2-abhijit.gangurde@amd.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In bnxt_re_register_ib(), strscpy() is called with the length of the
source string rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'node_desc' has a fixed size, we
can safely omit the size argument and let strscpy() infer it using
sizeof().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250901150038.227036-2-thorsten.blum@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Change 'ret' from u32 to int in alloc_qpn() to store -EINVAL, and remove
the 'bail' label as it simply returns 'ret'.
Storing negative error codes in an u32 causes no runtime issues, but it's
ugly as pants, Change 'ret' from u32 to int type - this change has no
runtime impact.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://patch.msgid.link/20250826150556.541440-1-rongqianfeng@vivo.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When using KSM (Key Scatter-gather Memory) access mode, the HW requires
the IOVA to be aligned to the selected page size.
Without this alignment, the HW may not function correctly.
Currently, mlx5_umem_mkc_find_best_pgsz() does not filter out page sizes
that would result in misaligned IOVAs for KSM mode. This can lead to
selecting page sizes that are incompatible with the given IOVA.
Fix this by filtering the page size bitmap when in KSM mode, keeping
only page sizes to which the IOVA is aligned to.
Fixes: fcfb03597b ("RDMA/mlx5: Align mkc page size capability check to PRM")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20250824144839.154717-1-edwards@nvidia.com
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Before this patch, we used a hardcoded value of 500 msec as the default
value for L2 firmware message response timeout. With this commit,
the driver is using the firmware timeout value from the firmware.
As part of this change moved bnxt_re_query_hwrm_intf_version() to
bnxt_re_setup_chip_ctx() so that timeout value is queries before
sending first command.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Co-developed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-10-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
- Added support for create_flow and destroy_flow verbs. These
verbs are used on RawEth QP to add a specific flow action.
- To support TCP dump on RoCE, added IB_FLOW_ATTR_SNIFFER
attribute.
- In create_flow verb, driver allocates mirror_vnic and configure it
with RawEth QP. Once this is done, driver will enable mirroring.
- In destroy_flow, driver will disable mirroring and free the mirror
vnic.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-8-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Added below support:
- Querying the pre-reserved mirror_vnic_id
- Allocating/freeing mirror_vnic
- Configuring mirror vnic to associate it with raw qp
These functions will be used in the subsequent patch in this series.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-7-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
- RawEth QP requires unique GID so that per function stats_ctx
is not polluted by packets mirrored to RoCE vnic.
- Added support to add unique GID when RawEth type QP is created.
- Added support to destroy unique GID when RawEth type QP is
destroyed.
- Allocated exclusive stats_ctx to use for RawEth type QP.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Moved the stats context allocation logic to a new function.
The stats context memory allocation code has been moved from
bnxt_qplib_alloc_hwctx() to the newly added bnxt_re_get_stats_ctx()
function. Also, the code to send the firmware command has been moved.
This patch is in preparation for other patches in this series.
There is no functional changes intended.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-5-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This patch is in preparation for other patches in this series.
There is no functional changes intended.
1. Rename bnxt_qplib_alloc_ctx() to bnxt_qplib_alloc_hwctx().
2. Rename bnxt_qplib_free_ctx() to bnxt_qplib_free_hwctx().
3. Reduce the number of arguments of bnxt_qplib_alloc_hwctx()
by moving a check outside of it.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Added data structures required for supporting mirroring on
RoCE device.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When the firmware advertises that the device is capable of supporting
port mirroring on RoCE device, reserve one additional stat_ctx.
To support port mirroring feature, RDMA driver allocates one stat_ctx
for exclusive use in RawEth QP.
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250822040801.776196-2-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Make a error log message more user friendly.
When bnxt_re_register_netdev()() fails, the current
log does not convey much information.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250814112555.221665-10-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The Rockchip RK3588 MIPI CSI-2 DPHY can be supported using the existing
phy-rockchip-inno-csidphy driver, the notable differences being
- the control bits in the GRF
- the additional reset line
Add support for this variant.
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-6-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
