Add fan-shutdown-percent property, used to describe fan RPM in percent set
during shutdown. This is used to keep the fan running at fixed RPM after
the kernel shut down, which is useful on hardware that does keep heating
itself even after the kernel did shut down, for example from some sort of
management core. The current behavior of pwm-fan is to unconditionally
stop the fan on shutdown, which is not always the safe and correct thing
to do, so let the hardware description include the expected behavior.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250904202157.170600-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document fan-shutdown-percent property, used to describe fan RPM in percent
set during shutdown. This is used to keep the fan running at fixed RPM after
the kernel shut down, which is useful on hardware that does keep heating
itself even after the kernel did shut down, for example from some sort of
management core.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250904202157.170600-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sort all the declarations in the source file. Contributors are asked
to insert new entries keeping alphabetical order, but the existing
ones were not completely sorted.
Signed-off-by: Michael Tandy <git@mjt.me.uk>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250903184753.5876-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ti,maximum-expected-current-microamp, ti,shunt-gain, and shunt-resistor
properties are not supported on all chips described in this bindings file.
Update the bindings accordingly.
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250901155902.2667063-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for label sysfs attribute similar to other hwmon devices.
This is particularly useful for systems with multiple sensors on the
same board, where identifying individual sensors is much easier since
labels can be defined via device tree.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Link: https://lore.kernel.org/r/20250825180248.1943607-2-flaviu.nistor@gmail.com
[groeck: Fixed continuation line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for an optional label property similar to other hwmon devices.
This allows, in case of boards with multiple TMP102 sensors, to assign
distinct names to each instance.
Signed-off-by: Flaviu Nistor <flaviu.nistor@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250825180248.1943607-1-flaviu.nistor@gmail.com
[groeck: Dropped unnecessary "|" after "description:"]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Remove outdated mention of the supported mmotherboard families and add a
hint which sensor readings are available via the module.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250830131224.748481-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Change the 'ret' variable from u32 to int in nct6775_asuswmi_read() to
store negative error codes or zero;
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250830095105.3271-1-rongqianfeng@vivo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Intel CPUs have been using Family 6 for a while. The Family-model checks
in the coretemp driver implicitly assume Family 6. With the upcoming
Family 18 and 19 models, some of these checks fall apart.
While reading the temperature target MSR, cpu_has_tjmax() performs model
checks only to determine if a device warning should be printed. Instead
of expanding the checks, get rid of the function and print the warning
once unconditionally if the MSR read fails. The checks aren't worth
preventing a single line warning to dmesg.
Update the rest of the x86_model checks with VFM ones to make them more
robust. This automatically covers the upcoming Family 18 and 19 as well
as any future extended families.
Add a code comment to reflect that none of the CPUs in Family 5 or
Family 15 set X86_FEATURE_DTHERM. The VFM checks do not impact these
CPUs since the driver does not load on them.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250828201729.1145420-1-sohil.mehta@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Many AMD CPUs can support this feature now. We would get a wrong CPU DIE
temperature if don't consider this. In low-temperature environments,
the CPU die temperature can drop below zero. So many platforms would like
to make extended temperature range as their default configuration.
Default temperature range (0C to 255.875C).
Extended temperature range (-49C to +206.875C).
Ref Doc: AMD V3000 PPR (Doc ID #56558).
Signed-off-by: Chuande Chen <chuachen@cisco.com>
Link: https://lore.kernel.org/r/20250814053940.96764-1-chenchuande@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This fixes differences for the P8 system that was initially set to
the same thermal values as the P7, also adds in the PSU sensor for
all of the supported systems
Signed-off-by: David Ober <dober@lenovo.com>
Signed-off-by: David Ober <dober6023@gmail.com>
Link: https://lore.kernel.org/r/20250807103228.10465-1-dober6023@gmail.com
[groeck: Update subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The device ID of Strix Halo Data Fabric Function 3 has been in the tree
since commit 0e640f0a47 ("x86/amd_nb: Add new PCI IDs for AMD family
0x1a"), but is somehow missing from k10temp_id_table.
Add it so that it works out of the box.
Tested on Beelink GTR9 Pro Mini PC.
Signed-off-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250823180443.85512-1-i@rong.moe
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the Lantiq cpu temperature sensor bindings to yaml format.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250814080708.3054732-1-olek2@wp.pl
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Logging messages that show some type of "out of memory" error are generally
unnecessary as there is a generic message and a stack dump done by the
memory subsystem. These messages generally increase kernel size without
much added value[1].
The dev_err_probe() doesn't do anything when error is '-ENOMEM'. Therefore,
remove the useless call to dev_err_probe(), and just return the value
instead.
[1]: https://lore.kernel.org/lkml/1402419340.30479.18.camel@joe-AO725/
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250820131509.502007-1-liaoyuanhong@vivo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
I haven't been active in maintaining the hwmon subsystem in the last
decade, so I think it's about time to admit that I do not have the
time for this duty and update the MAINTAINERS file to reflect that.
I would like to thank Guenter Roeck for taking over and doing an
excellent work for so many years.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20250827111344.0debba2a@endymion
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for sq24905c Hot-Swap Controller and Digital Power Monitor.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: ChiShih Tsai <tomtsai764@gmail.com>
Link: https://lore.kernel.org/r/20250806223724.1207-2-tomtsai764@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for lm75 compatible NXP P3T1750
temperature sensor.
Signed-off-by: Lakshay Piplani <lakshay.piplani@nxp.com>
Link: https://lore.kernel.org/r/20250728041913.3754236-2-lakshay.piplani@nxp.com
[groeck: Fixed alphabetic order for new chip entries]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the ROG STRIX Z790E GAMING WIFI II board.
Signed-off-by: Nicholas Flintham <nick@flinny.org>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250728205133.15487-4-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update call sites in `task.rs` to import `ARef` and
`AlwaysRefCounted` from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust 1.80.0 added:
align_of
align_of_val
size_of
size_of_val
from `core::mem` to the prelude [1].
For similar reasons, and to minimize potential confusion when code may
work in later versions but not in our current minimum, add it to our
prelude too.
Link: https://github.com/rust-lang/rust/pull/123168 [1]
Link: https://lore.kernel.org/rust-for-linux/CANiq72kOLYR2A95o0ji2mDmEqOKh9e9_60zZKmgF=vZmsW6DRg@mail.gmail.com/ [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The error codes come from several headers.
Thus, add the other header links.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
[ Sorted headers. Added line breaks. Reworded commit message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`srctree/` links may point to nonexistent files, e.g. due to renames
that missed to update the files or simply because of typos.
Since they can be easily checked for validity, do so and print a warning
in the file does not exist.
This found the following cases already in-tree:
warning: srctree/ link to include/linux/blk_mq.h does not exist
warning: srctree/ link to include/linux/drm/drm_gem.h does not exist
warning: srctree/ link to include/linux/drm/drm_drv.h does not exist
warning: srctree/ link to include/linux/drm/drm_ioctl.h does not exist
warning: srctree/ link to include/linux/drm/drm_file.h does not exist
warning: srctree/ link to include/linux/drm/drm_device.h does not exist
Inspired-by: Onur Özkan <work@onurozkan.dev>
Link: https://lore.kernel.org/rust-for-linux/CANiq72=xCYA7z7_rxpzzKkkhJs6m7L_xEaLMuArVn3ZAcyeHdA@mail.gmail.com/
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This `srctree/` link pointed to a file with an underscore, but the header
used a dash instead.
Thus fix it.
This cleans a future warning that will check our `srctree/` links.
Cc: stable@vger.kernel.org
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Update the in-file reference of sync/aref.rs to import `ARef` and
`AlwaysRefCounted` from `sync::aref` instead of `types`.
This aligns with the ongoing effort to move `ARef` and
`AlwaysRefCounted` to sync.
Suggested-by: Benno Lossin <lossin@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1173
Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Allocator:
- Provide information about the minimum alignment guarantees of
Kmalloc, Vmalloc and KVmalloc.
- Take minimum alignment guarantees of allocators for ForeignOwnable
into account.
- Remove the `allocator_test` incl. `Cmalloc`.
Box:
- Implement Box::pin_slice(), which constructs a pinned slice of
elements.
Vec:
- Simplify KUnit test module name to "rust_kvec".
- Add doc-test for Vec::as_slice().
- Constify various methods.
DMA:
- Update ARef and AlwaysRefCounted imports.
MISC:
- Remove support for unused host `#[test]`s.
- Constify ArrayLayout::new_unchecked().
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaLnByQAKCRBFlHeO1qrK
Lq1VAP4qZDK6vfjXWOwcDB/vqtSLBLY3bLTceXrtoFtHH7OdqAEAviY19NnGTwb5
gwOfbxjU+/9q1p/3ukmAiUQZiN93rwI=
=SBFK
-----END PGP SIGNATURE-----
Merge tag 'alloc-next-v6.18-2025-09-04' of https://github.com/Rust-for-Linux/linux into rust-next
Pull alloc and DMA updates from Danilo Krummrich:
Allocator:
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' incl. 'Cmalloc'.
Box:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
Vec:
- Simplify KUnit test module name to 'rust_kvec'.
- Add doc-test for 'Vec::as_slice()'.
- Constify various methods.
DMA:
- Update 'ARef' and 'AlwaysRefCounted' imports.
MISC:
- Remove support for unused host '#[test]'s.
- Constify 'ArrayLayout::new_unchecked()'.
* tag 'alloc-next-v6.18-2025-09-04' of https://github.com/Rust-for-Linux/linux:
rust: alloc: remove `allocator_test`
rust: kernel: remove support for unused host `#[test]`s
rust: alloc: implement Box::pin_slice()
rust: alloc: add ARCH_KMALLOC_MINALIGN to bindgen blocklist
rust: dma: Update ARef and AlwaysRefCounted imports from sync::aref
rust: alloc: take the allocator into account for FOREIGN_ALIGN
rust: alloc: specify the minimum alignment of each allocator
rust: make `kvec::Vec` functions `const fn`
rust: make `ArrayLayout::new_unchecked` a `const fn`
rust: alloc: kvec: simplify KUnit test module name to "rust_kvec"
rust: alloc: kvec: add doc example for as_slice method
The logic of the headphone detect pin seems to be inverted, with this
change headphones actually output sound when plugged in.
Does not need workaround of using pin-switches to enable output.
Verified by checking /sys/kernel/debug/gpio.
Fixes: ae46756faf ("arm64: dts: rockchip: analog audio on Orange Pi 5")
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250904030150.986042-1-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
FriendlyELEC NanoPC-T6 LTS schematics shows VCC_1V8_S3 being used to
power SPI NOR chip.
This fixes the following kernel message:
spi-nor spi5.0: supply vcc not found, using dummy regulator
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Link: https://lore.kernel.org/r/20250905-nanopc-t6-spi-nor-v2-1-098b476d9509@juszkiewicz.com.pl
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
