Kernel initializes the "jiffies" timer as 5 minutes below zero, as shown
in include/linux/jiffies.h
/*
* Have the 32 bit jiffies value wrap 5 minutes after boot
* so jiffies wrap bugs show up earlier.
*/
#define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
And jiffies comparison help functions cast unsigned value to signed to
cover wraparound
#define time_after_eq(a,b) \
(typecheck(unsigned long, a) && \
typecheck(unsigned long, b) && \
((long)((a) - (b)) >= 0))
When quota->charged_from is initialized to 0, time_after_eq() can
incorrectly return FALSE even after reset_interval has elapsed. This
occurs when (jiffies - reset_interval) produces a value with MSB=1, which
is interpreted as negative in signed arithmetic.
This issue primarily affects 32-bit systems because: On 64-bit systems:
MSB=1 values occur after ~292 million years from boot (assuming HZ=1000),
almost impossible.
On 32-bit systems: MSB=1 values occur during the first 5 minutes after
boot, and the second half of every jiffies wraparound cycle, starting from
day 25 (assuming HZ=1000)
When above unexpected FALSE return from time_after_eq() occurs, the
charging window will not reset. The user impact depends on esz value at
that time.
If esz is 0, scheme ignores configured quotas and runs without any limits.
If esz is not 0, scheme stops working once the quota is exhausted. It
remains until the charging window finally resets.
So, change quota->charged_from to jiffies at damos_adjust_quota() when it
is considered as the first charge window. By this change, we can avoid
unexpected FALSE return from time_after_eq()
Link: https://lkml.kernel.org/r/20250822025057.1740854-1-ekffu200098@gmail.com
Fixes: 2b8a248d58 ("mm/damon/schemes: implement size quota for schemes application speed control") # 5.16
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When restoring a reservation for an anonymous page, we need to check to
freeing a surplus. However, __unmap_hugepage_range() causes data race
because it reads h->surplus_huge_pages without the protection of
hugetlb_lock.
And adjust_reservation is a boolean variable that indicates whether
reservations for anonymous pages in each folio should be restored.
Therefore, it should be initialized to false for each round of the loop.
However, this variable is not initialized to false except when defining
the current adjust_reservation variable.
This means that once adjust_reservation is set to true even once within
the loop, reservations for anonymous pages will be restored
unconditionally in all subsequent rounds, regardless of the folio's state.
To fix this, we need to add the missing hugetlb_lock, unlock the
page_table_lock earlier so that we don't lock the hugetlb_lock inside the
page_table_lock lock, and initialize adjust_reservation to false on each
round within the loop.
Link: https://lkml.kernel.org/r/20250823182115.1193563-1-aha310510@gmail.com
Fixes: df7a6d1f64 ("mm/hugetlb: restore the reservation if needed")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reported-by: syzbot+417aeb05fd190f3a6da9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=417aeb05fd190f3a6da9
Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In do_migrate_range(), the hwpoisoned folio may be large folio, which
can't be handled by unmap_poisoned_folio().
I can reproduce this issue in qemu after adding delay in memory_failure()
BUG: kernel NULL pointer dereference, address: 0000000000000000
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:try_to_unmap_one+0x16a/0xfc0
<TASK>
rmap_walk_anon+0xda/0x1f0
try_to_unmap+0x78/0x80
? __pfx_try_to_unmap_one+0x10/0x10
? __pfx_folio_not_mapped+0x10/0x10
? __pfx_folio_lock_anon_vma_read+0x10/0x10
unmap_poisoned_folio+0x60/0x140
do_migrate_range+0x4d1/0x600
? slab_memory_callback+0x6a/0x190
? notifier_call_chain+0x56/0xb0
offline_pages+0x3e6/0x460
memory_subsys_offline+0x130/0x1f0
device_offline+0xba/0x110
acpi_bus_offline+0xb7/0x130
acpi_scan_hot_remove+0x77/0x290
acpi_device_hotplug+0x1e0/0x240
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x186/0x340
Besides, do_migrate_range() may be called between memory_failure set
hwpoison flag and isolate the folio from lru, so remove WARN_ON(). In other
places, unmap_poisoned_folio() is called when the folio is isolated, obey
it in do_migrate_range() too.
[david@redhat.com: don't abort offlining, fixed typo, add comment]
Link: https://lkml.kernel.org/r/3c214dff-9649-4015-840f-10de0e03ebe4@redhat.com
Fixes: b15c87263a ("hwpoison, memory_hotplug: allow hwpoisoned pages to be offlined")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Raghav <kernel@pankajraghav.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 8ee53820ed ("thp: mmu_notifier_test_young") introduced
mmu_notifier_test_young(), but we are passing the wrong address.
In xxx_scan_pmd(), the actual iteration address is "_address" not
"address". We seem to misuse the variable on the very beginning.
Change it to the right one.
[akpm@linux-foundation.org fix whitespace, per everyone]
Link: https://lkml.kernel.org/r/20250822063318.11644-1-richard.weiyang@gmail.com
Fixes: 8ee53820ed ("thp: mmu_notifier_test_young")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Bernard Pidoux reported a regression apparently caused by commit
c353e8983e ("net: introduce per netns packet chains").
skb->dev becomes NULL and we crash in __netif_receive_skb_core().
Before above commit, different kind of bugs or corruptions could happen
without a major crash.
But the root cause is that ax25_kiss_rcv() can queue/mangle input skb
without checking if this skb is shared or not.
Many thanks to Bernard Pidoux for his help, diagnosis and tests.
We had a similar issue years ago fixed with commit 7aaed57c5c
("phonet: properly unshare skbs in phonet_rcv()").
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Bernard Pidoux <f6bvp@free.fr>
Closes: https://lore.kernel.org/netdev/1713f383-c538-4918-bc64-13b3288cd542@free.fr/
Tested-by: Bernard Pidoux <f6bvp@free.fr>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joerg Reuter <jreuter@yaina.de>
Cc: David Ranch <dranch@trinnet.net>
Cc: Folkert van Heusden <folkert@vanheusden.com>
Reviewed-by: Dan Cross <crossd@gmail.com>
Link: https://patch.msgid.link/20250902124642.212705-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An exchange with a NFC target must complete within NCI_DATA_TIMEOUT.
A delay of 700 ms is not sufficient for cryptographic operations on smart
cards. CardOS 6.0 may need up to 1.3 seconds to perform 256-bit ECDH
or 3072-bit RSA. To prevent brute-force attacks, passports and similar
documents introduce even longer delays into access control protocols
(BAC/PACE).
The timeout should be higher, but not too much. The expiration allows
us to detect that a NFC target has disappeared.
Signed-off-by: Juraj Šarinay <juraj@sarinay.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250902113630.62393-1-juraj@sarinay.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mctp_getsockopt(), unrecognized options currently return -EINVAL.
In contrast, mctp_setsockopt() returns -ENOPROTOOPT for unknown
options.
Update mctp_getsockopt() to also return -ENOPROTOOPT for unknown
options. This aligns the behavior of getsockopt() and setsockopt(),
and matches the standard kernel socket API convention for handling
unsupported options.
Fixes: 99ce45d5e7 ("mctp: Implement extended addressing")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250902102059.1370008-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently SMC code is validating the reserved bits while parsing the incoming
CLC decline message & when this validation fails, its treated as a protocol
error. As a result, the SMC connection is terminated instead of falling back to
TCP. As per RFC7609[1] specs we shouldn't be validating the reserved bits that
is part of CLC message. This patch fixes this issue.
CLC Decline message format can viewed here[2].
[1] https://datatracker.ietf.org/doc/html/rfc7609#page-92
[2] https://datatracker.ietf.org/doc/html/rfc7609#page-105
Fixes: 8ade200c26 ("net/smc: add v2 format of CLC decline message")
Signed-off-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20250902082041.98996-1-mjambigi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The inetdev_init() function never returns NULL. Check for error
pointers instead.
Fixes: 22600596b6 ("ipv4: give an IPv4 dev to blackhole_netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/aLaQWL9NguWmeM1i@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All paths in probe that call goto defer do so before assigning phydev
and thus it makes sense to cleanup the prior index. It also fixes a bug
where index 0 does not get cleaned up.
Fixes: b7d3e3d3d2 ("net: thunderx: Don't leak phy device references on -EPROBE_DEFER condition.")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901213314.48599-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_np needs to get freed, just like the other child nodes.
Fixes: 5fc7cf1794 ("net: thunderx: Cleanup PHY probing code.")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250901213018.47392-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gatien Chevallier says:
====================
net: stmmac: allow generation of flexible PPS relative to MAC time
When doing some testing on stm32mp2x platforms(MACv5), I noticed that
the command previously used with a MACv4 for genering a PPS signal:
echo "0 0 0 1 1" > /sys/class/ptp/ptp0/period
did not work.
This is because the arguments passed through this command must contain
the start time at which the PPS should be generated, relative to the
MAC system time. For some reason, a time set in the past seems to work
with a MACv4.
Because passing such an argument is tedious, consider that any time
set in the past is an offset regarding the MAC system time. This way,
this does not impact existing scripts and the past time use case is
handled. Edit: But maybe that's not important and we can just change
the default behavior to this.
Example to generate a flexible PPS signal that has a 1s period 3s
relative to when the command was entered:
echo "0 3 0 1 1" > /sys/class/ptp/ptp0/period
====================
Link: https://patch.msgid.link/20250901-relative_flex_pps-v4-0-b874971dfe85@foss.st.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case the time arguments used for flexible PPS signal generation are in
the past, consider the arguments to be a time offset relative to the MAC
system time.
This way, past time use case is handled and it avoids the tedious work
of passing an absolute time value for the flexible PPS signal generation
while not breaking existing scripts that may rely on this behavior.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://patch.msgid.link/20250901-relative_flex_pps-v4-2-b874971dfe85@foss.st.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Export the timespec64_add_safe() symbol so that this function can be used
in modules where computation of time related is done.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20250901-relative_flex_pps-v4-1-b874971dfe85@foss.st.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4b30209255 ("selftests/xsk: Add tail adjustment tests and support
check") added a new global to xsk_xdp_progs.c, but left out the access in
the testapp_xdp_metadata_copy() function. Since bpf_map_update_elem() will
write to the whole bss section, it gets truncated. Fix by writing to
skel_rx->bss->count directly.
Fixes: 4b30209255 ("selftests/xsk: Add tail adjustment tests and support check")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250829-selftests-bpf-xsk_regression_fix-v1-1-5f5acdb9fe6b@suse.com
Currently, even if some subtests fails, the end result will still yield
"ok 1 selftests: bpf: test_xsk.sh". Fix it by exiting with 1 if there are
any failures.
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20250828-selftests-bpf-test_xsk_ret-v1-1-e6656c01f397@suse.com
The blamed commit added code which could return an error after we
requested the PHY interrupt. When we return an error, the caller
will call phy_detach() which fails to free the interrupt.
Rearrange the code such that failing operations happen before the
interrupt is requested, thereby allowing phy_detach() to be used.
Note that replacing phy_detach() with phy_disconnect() in these
paths could lead to freeing an interrupt which was never requested.
Fixes: 1942b1c6f6 ("net: phylink: make configuring clock-stop dependent on MAC support")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1ut35k-00000001UEl-0iq6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add i.MX91 specific settings for EQoS.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://patch.msgid.link/20250901103632.3409896-7-joy.zou@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ublk_ch_uring_cmd_local() is a thin wrapper around __ublk_ch_uring_cmd()
that copies the ublksrv_io_cmd from user-mapped memory to the stack
using READ_ONCE(). This ublksrv_io_cmd is passed by pointer to
__ublk_ch_uring_cmd() and __ublk_ch_uring_cmd() is a large function
unlikely to be inlined, so __ublk_ch_uring_cmd() will have to load the
ublksrv_io_cmd fields back from the stack. Inline __ublk_ch_uring_cmd()
into ublk_ch_uring_cmd_local() and load the ublksrv_io_cmd fields into
local variables with READ_ONCE(). This allows the compiler to delay
loading the fields until they are needed and choose whether to store
them in registers or on the stack.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250808153251.282107-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_cmd_iopoll_done()'s only caller was removed in commit
9ce6c9875f ("nvme: always punt polled uring_cmd end_io work to
task_work"). So remove the unused function too.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250902013328.1517686-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_cmd_done() takes the result code for the CQE as a ssize_t ret
argument. However, the CQE res field is a s32 value, as is the argument
to io_req_set_res(). To clarify that only s32 values can be faithfully
represented without truncation, change io_uring_cmd_done()'s ret
argument type to s32.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250902012609.1513123-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-02 (ice, idpf, i40e, ixgbe, e1000e)
For ice:
Jake adds checks for initialization of Tx timestamp tracking structure
to prevent NULL pointer dereferences.
For idpf:
Josh moves freeing of auxiliary device id to prevent use-after-free issue.
Emil sets, expected, MAC type value when sending virtchnl add/delete MAC
commands.
For i40e:
Jake removes read debugfs access as 'netdev_ops' has the possibility to
overflow.
Zhen Ni adds handling for when MAC list is empty.
For ixgbe:
Alok Tiwari corrects bitmap being used for link speeds.
For e1000e:
Vitaly adds check to ensure overflow does not occur in
e1000_set_eeprom().
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: fix heap overflow in e1000_set_eeprom
ixgbe: fix incorrect map used in eee linkmode
i40e: Fix potential invalid access when MAC list is empty
i40e: remove read access to debugfs files
idpf: set mac type when adding and removing MAC filters
idpf: fix UAF in RDMA core aux dev deinitialization
ice: fix NULL access of tx->in_use in ice_ll_ts_intr
ice: fix NULL access of tx->in_use in ice_ptp_ts_irq
====================
Link: https://patch.msgid.link/20250902232131.2739555-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a vast majority of Qualcomm chipsets DisplayPort controller can
support several MST streams (up to 4x). To support MST these chipsets
use up to 4 stream pixel clocks for the DisplayPort controller and
several extra register regions. Expand corresponding region and clock
bindings for these platforms and fix example schema files to follow
updated bindings.
Note: On chipsets that support MST, the number of streams supported
can vary between controllers. For example, SA8775P supports 4 MST
streams on mdss_dp0 but only 2 streams on mdss_dp1.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/672585/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-7-7526f0311eaa@oss.qualcomm.com
DP controller schema documents assigned-clocks and
assigned-clock-parents. However these assignments should not be a part
of the ABI: there are no actual requirements on the order of the
assignments, MST cases require different number of clocks to be
assigned, etc.
Instead of fixing up the documentation, drop the assigned-clock-parents
and assigned-clocks from the bindings. The generic clock/clock.yaml
already covers these properties.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672586/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-6-7526f0311eaa@oss.qualcomm.com
Fix c&p error and correct example to use 32-bit addressing (as the rest
of the example DT does) instead of 64-bit (as the platform does). It
got unnoticed before since DP controller node wasn't validated against
DT schema because of the missing compatible.
Fixes: 81de267367 ("dt-bindings: display/msm: Document MDSS on X1E80100")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672574/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-4-7526f0311eaa@oss.qualcomm.com
Currently SM6350 uses qcom,sm8350-dp as a fallback compatible entry.
This works, but adding DP MST support will reveal that this SoC is
not fully compatible with SM8350 platform: the former one doesn't
provide MST support, while the latter one will get it. DT schema for
SM8350 is going to demand MST-related clocks which SM6350 doesn't
provide.
Add new entry for SM6350 with fallback to SC7180 (which belongs to the
same generation and also doesn't have MST support). SC7180 has been
supported by the Linux kernel long ago (and long before SM8350 support
was added).
Fixes: 3908615159 ("dt-bindings: display: msm: dp-controller: document SM6350 compatible")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/672571/
Link: https://lore.kernel.org/r/20250903-dp_mst_bindings-v8-2-7526f0311eaa@oss.qualcomm.com
Add support for Global clock controller for Glymur SoC which would
enable the consumers to enable/disable the required clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-7-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add clock operations and register offsets to enable control of the Taycan
EKO_T PLL, allowing for proper configuration and management of the PLL.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-5-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a clock driver for the TCSR clock controller found on Glymur SoC,
which provides refclks for PCIE, USB, and UFS subsystems.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-3-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Glymur SoC TCSR block provides CLKREF clocks for EDP, PCIe and USB.
Add this to the TCSR clock controller binding together with identifiers
for the clocks.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-glymur-clock-controller-v5-v5-2-01b8c8681bcd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Followup of commit c51da3f7a1 ("net: remove sock_i_uid()")
A recent syzbot report was the trigger for this change.
Over the years, we had many problems caused by the
read_lock[_bh](&sk->sk_callback_lock) in sock_i_uid().
We could fix smc_diag_dump_proto() or make a more radical move:
Instead of waiting for new syzbot reports, cache the socket
inode number in sk->sk_ino, so that we no longer
need to acquire sk->sk_callback_lock in sock_i_ino().
This makes socket dumps faster (one less cache line miss,
and two atomic ops avoided).
Prior art:
commit 25a9c8a443 ("netlink: Add __sock_i_ino() for __netlink_diag_dump().")
commit 4f9bf2a2f5 ("tcp: Don't acquire inet_listen_hashbucket::lock with disabled BH.")
commit efc3dbc374 ("rds: Make rds_sock_lock BH rather than IRQ safe.")
Fixes: d2d6422f8b ("x86: Allow to enable PREEMPT_RT.")
Reported-by: syzbot+50603c05bbdf4dfdaffa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68b73804.050a0220.3db4df.01d8.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250902183603.740428-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wamJ
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
1) prefer vmalloc_array in ebtables, from Qianfeng Rong.
2) Use csum_replace4 instead of open-coding it, from Christophe Leroy.
3+4) Get rid of GFP_ATOMIC in transaction object allocations, those
cause silly failures with large sets under memory pressure, from
myself.
5) Remove test for AVX cpu feature in nftables pipapo set type,
testing for AVX2 feature is sufficient.
6) Unexport a few function in nf_reject infra: no external callers.
7) Extend payload offset to u16, this was restricted to values <=255
so far, from Fernando Fernandez Mancera.
* tag 'nf-next-25-09-02' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_payload: extend offset to 65535 bytes
netfilter: nf_reject: remove unneeded exports
netfilter: nft_set_pipapo: remove redundant test for avx feature bit
netfilter: nf_tables: all transaction allocations can now sleep
netfilter: nf_tables: allow iter callbacks to sleep
netfilter: nft_payload: Use csum_replace4() instead of opencoding
netfilter: ebtables: Use vmalloc_array() to improve code
====================
Link: https://patch.msgid.link/20250902133549.15945-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplifies error handling by replacing the manual check
of the return value with the `to_result` helper.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Elle Rhumsaa <elle@weathered-steel.dev>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://patch.msgid.link/20250821091235.800-1-work@onurozkan.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the SMBus Quick operation from this driver because it is not
natively supported by the hardware and is wrongly implemented in the
driver.
The I2C controllers in Realtek RTL9300 and RTL9310 are SMBus-compliant
but there doesn't seem to be native support for the SMBus Quick
operation. It is not explicitly mentioned in the documentation but
looking at the registers which configure an SMBus transaction, one can
see that the data length cannot be set to 0. This suggests that the
hardware doesn't allow any SMBus message without data bytes (except for
those it does on it's own, see SMBus Block Read).
The current implementation of SMBus Quick operation passes a length of
0 (which is actually invalid). Before the fix of a bug in a previous
commit, this led to a read operation of 16 bytes from any register (the
one of a former transaction or any other value.
This caused issues like soft-bricked SFP modules after a simple probe
with i2cdetect which uses Quick by default. Running this with SFP
modules whose EEPROM isn't write-protected, some of the initial bytes
are overwritten because a 16-byte write operation is executed instead of
a Quick Write. (This temporarily soft-bricked one of my DAC cables.)
Because SMBus Quick operation is obviously not supported on these
controllers (because a length of 0 cannot be set, even when no register
address is set), remove that instead of claiming there is support. There
also shouldn't be any kind of emulated 'Quick' which just does another
kind of operation in the background. Otherwise, specific issues occur
in case of a 'Quick' Write which actually writes unknown data to an
unknown register.
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-4-jelonek.jonas@gmail.com
Add an explicit check for the xfer length to 'rtl9300_i2c_config_xfer'
to ensure the data length isn't within the supported range. In
particular a data length of 0 is not supported by the hardware and
causes unintended or destructive behaviour.
This limitation becomes obvious when looking at the register
documentation [1]. 4 bits are reserved for DATA_WIDTH and the value
of these 4 bits is used as N + 1, allowing a data length range of
1 <= len <= 16.
Affected by this is the SMBus Quick Operation which works with a data
length of 0. Passing 0 as the length causes an underflow of the value
due to:
(len - 1) & 0xf
and effectively specifying a transfer length of 16 via the registers.
This causes a 16-byte write operation instead of a Quick Write. For
example, on SFP modules without write-protected EEPROM this soft-bricks
them by overwriting some initial bytes.
For completeness, also add a quirk for the zero length.
[1] https://svanheule.net/realtek/longan/register/i2c_mst1_ctrl2
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-3-jelonek.jonas@gmail.com
Fix the current check for number of channels (child nodes in the device
tree). Before, this was:
if (device_get_child_node_count(dev) >= RTL9300_I2C_MUX_NCHAN)
RTL9300_I2C_MUX_NCHAN gives the maximum number of channels so checking
with '>=' isn't correct because it doesn't allow the last channel
number. Thus, fix it to:
if (device_get_child_node_count(dev) > RTL9300_I2C_MUX_NCHAN)
Issue occured on a TP-Link TL-ST1008F v2.0 device (8 SFP+ ports) and fix
is tested there.
Fixes: c366be7202 ("i2c: Add driver for the RTL9300 I2C controller")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250831100457.3114-2-jelonek.jonas@gmail.com
Renesas RZN1 GMAC uses three interrupts in in-kernel DTS and common
snps,dwmac.yaml binding is flexible, so define precise constraint for
this device.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250902154051.263156-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
STMMAC on SoCFPGA uses exactly one interrupt in in-kernel DTS and common
snps,dwmac.yaml binding is flexible, so define precise constraint for
this device.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Matthew Gerlach <matthew.gerlach@altera.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250902154051.263156-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The blamed commit introduced the concept of split attribute
counting, and later allocating an array to hold them, however
TypeArrayNest wasn't updated to use the new counting variable.
Abbreviated example from tools/net/ynl/generated/nl80211-user.c:
nl80211_if_combination_attributes_parse(...):
unsigned int n_limits = 0;
[...]
ynl_attr_for_each(attr, nlh, yarg->ys->family->hdr_len)
if (type == NL80211_IFACE_COMB_LIMITS)
ynl_attr_for_each_nested(attr2, attr)
dst->_count.limits++;
if (n_limits) {
dst->_count.limits = n_limits;
/* allocate and parse attributes */
}
In the above example n_limits is guaranteed to always be 0,
hence the conditional is unsatisfiable and is optimized out.
This patch changes the attribute counting to use n_limits++ in the
attribute counting loop in the above example.
Fixes: 58da455b31 ("tools: ynl-gen: improve unwind on parsing errors")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250902160001.760953-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In this context "not that ..." should properly be "note that ...".
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-4-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes the generated min-len check for binary
attributes to use the NLA_POLICY_MIN_LEN() macro, thereby the
generated code supports strict policy validation.
With this change TypeBinary will always generate a NLA_BINARY
attribute policy.
This doesn't change any currently generated code, as it isn't
used in any specs currently used for generating code.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While updating the binary min-len implementation, I noticed that
the only user, should AFAICT be using exact-len instead.
In net/ipv4/fou_core.c FOU_ATTR_LOCAL_V6 and FOU_ATTR_PEER_V6
are only used for singular IPv6 addresses, and there are AFAICT
no known implementations trying to send more, it therefore
appears safe to change it to an exact-len policy.
This patch therefore changes the local-v6/peer-v6 attributes to
use an exact-len check, instead of a min-len check.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
