Remove unnecessary casts of constant values to u16.
C's integer promotion rules make them ints no matter what.
Additionally replace E1000_MNG_VLAN_NONE with resulting value
rather than casting -1 to u16.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove unnecessary casts of constant values to u16.
C's integer promotion rules make them ints no matter what.
Additionally replace E1000_MNG_VLAN_NONE with resulting value
rather than casting -1 to u16.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info>
Suggested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
rx_long_byte_count shows the value of the GORC (Good Octets Received
Count) register. However, the register value is already shown as
rx_bytes and they always show the same value.
Remove rx_long_byte_count as the Intel ethernet driver e1000e did in
commit 0a939912cf ("e1000e: cleanup redundant statistics counter").
Tested on Intel Corporation I350 Gigabit Network Connection.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently ethtool shows lbrx_packets and lbrx_bytes (Good RX
Packets/Octets loopback Count), but doesn't show the TX-side equivalents
(lbtx_packets and lbtx_bytes). Add visibility of those missing
statistics by adding them to ethtool statistics.
In addition, the order of lbrx_bytes and lbrx_packets is not consistent
with non-loopback statistics (rx_packets, rx_bytes). Therefore,
align the order by swapping positions of lbrx_bytes and lbrx_packets.
Tested on Intel Corporation I350 Gigabit Network Connection.
Before:
# ethtool -S ens5 | grep -E "x_(bytes|packets)"
rx_packets: 135
tx_packets: 106
rx_bytes: 16010
tx_bytes: 12451
lbrx_bytes: 1148
lbrx_packets: 12
After:
# ethtool -S ens5 | grep -E "x_(bytes|packets)"
rx_packets: 748
tx_packets: 304
rx_bytes: 81513
tx_bytes: 33698
lbrx_packets: 97
lbtx_packets: 109
lbrx_bytes: 12090
lbtx_bytes: 12401
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, during locating the CIVD section, the ixgbe driver loops
over the OROM area and at each iteration reads only OROM-datastruct-size
amount of data. This results in many small reads and is inefficient.
Optimize this by reading the entire OROM bank into memory once before
entering the loop. This significantly reduces the probing time.
Without this patch probing time may exceed over 25s, whereas with this
patch applied average time of probe is not greater than 5s.
without the patch:
[14:12:22] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[14:12:25] ixgbe 0000:21:00.0: Multiqueue Enabled: Rx Queue count = 63, Tx Queue count = 63 XDP Queue count = 0
[14:12:25] ixgbe 0000:21:00.0: 63.012 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x4 link)
[14:12:26] ixgbe 0000:21:00.0: MAC: 7, PHY: 27, PBA No: N55484-001
[14:12:26] ixgbe 0000:21:00.0: 20:3a:43:09:3a:12
[14:12:26] ixgbe 0000:21:00.0: Intel(R) 10 Gigabit Network Connection
[14:12:50] ixgbe 0000:21:00.0 ens2f0np0: renamed from eth0
with the patch:
[14:18:18] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[14:18:19] ixgbe 0000:21:00.0: Multiqueue Enabled: Rx Queue count = 63, Tx Queue count = 63 XDP Queue count = 0
[14:18:19] ixgbe 0000:21:00.0: 63.012 Gb/s available PCIe bandwidth (16.0 GT/s PCIe x4 link)
[14:18:19] ixgbe 0000:21:00.0: MAC: 7, PHY: 27, PBA No: N55484-001
[14:18:19] ixgbe 0000:21:00.0: 20:3a:43:09:3a:12
[14:18:19] ixgbe 0000:21:00.0: Intel(R) 10 Gigabit Network Connection
[14:18:22] ixgbe 0000:21:00.0 ens2f0np0: renamed from eth0
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The auto-negotiation limitation for 2.5G and 5G speeds is no longer true
for X550 successors like E610 adapter. Enable the 2.5G and 5G speeds in
auto-negotiation for E610 at driver load.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The SDMMC in this IP currently only supports legacy mode
due to a hardware quirk, setting the flags to reflect the limitation.
Fixes: deaa14ab6b ("ARM: dts: microchip: add support for sama7d65_curiosity board")
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250819170528.126010-1-Ryan.Wanner@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Like with the ARM64 Microchip platforms, lets add a generic ARCH_MICROCHIP
symbol and select it so that drivers that are reused for multiple product
generation or lines, can just depend on it instead of adding each SoC
symbol as their dependencies.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20250813174720.540015-3-robert.marko@sartura.hr
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Add the hdp devicetree node for stm32mp15 SoC family
Keep the node disabled as HDP needs the pinctrl SoC configuration to be
able to output its mux output signal outside of the SoC, on the SoC pad.
This configuration is provided in the board dtsi file through 'pinctrl-*'
properties as well as HDP mux configuration.
Thus, if needed, HDP should be enabled in board dtsi file.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250711-hdp-upstream-v7-5-faeecf7aaee1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the hdp devicetree node for stm32mp13 SoC family.
Keep the node disabled as HDP needs the pinctrl SoC configuration to be
able to output its mux output signal outside of the SoC, on the SoC pad.
This configuration is provided in the board dtsi file through 'pinctrl-*'
properties as well as HDP mux configuration.
Thus, if needed, HDP should be enabled in board dtsi file.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250711-hdp-upstream-v7-4-faeecf7aaee1@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add to the node m4_rproc the pinctrl property corresponding to the
orange LED.
The GPIO is reserved for the coprocessor Cortex-M4 and will be
ignored by Linux.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/r/20250610152309.299438-5-antonio.borneo@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The GPIO H7 on boards stm32mp15xx-dkx and the GPIO D8 on boards
stm32mp15xx-ed1 are used by the coprocessor Cortex-M4.
Linux running on Cortex-A should not use the GPIO and should left
it available for the coprocessor.
Add two pinmux groups, one for each families of boards, setting
the GPIO function as Reserved (RSVD).
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Link: https://lore.kernel.org/r/20250610152309.299438-4-antonio.borneo@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Move startup code out of the __head section, now that this no longer has
a special significance. Move everything into .text or .init.text as
appropriate, so that startup code is not kept around unnecessarily.
[ bp: Fold in hunk to fix 32-bit CPU hotplug:
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202509022207.56fd97f4-lkp@intel.com ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-45-ardb+git@google.com
Recent EFI x86 systems are more strict when it comes to mapping boot
images, and require that mappings are either read-write or read-execute.
Now that the boot code is being cleaned up and refactored, most of it is
being moved into .init.text [where it arguably belongs] but that implies
that when booting on such strict EFI firmware, we need to take care to
map .init.text (and the .altinstr_aux section that follows it)
read-execute as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-44-ardb+git@google.com
In order to be able to have tight control over which code may execute
from the early 1:1 mapping of memory, but still link vmlinux as a single
executable, prefix all symbol references in startup code with __pi_, and
invoke it from outside using the __pi_ prefix.
Use objtool to check that no absolute symbol references are present in
the startup code, as these cannot be used from code running from the 1:1
mapping.
Note that this also requires disabling the latent-entropy GCC plugin, as
the global symbol references that it injects would require explicit
exports, and given that the startup code rarely executes more than once,
it is not a useful source of entropy anyway.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-43-ardb+git@google.com
Using core-y is not the correct way to get kbuild to descend into
arch/x86/boot/startup. For instance, building an individual object does
not work as expected when the pattern rule is local to the Makefile
$ make arch/x86/boot/startup/map_kernel.pi.o
GEN Makefile
CALL /home/ardb/linux/scripts/checksyscalls.sh
DESCEND objtool
INSTALL libsubcmd_headers
make[3]: *** No rule to make target 'arch/x86/boot/startup/map_kernel.pi.o'. Stop.
make[2]: *** [/home/ardb/linux/scripts/Makefile.build:461: arch/x86] Error 2
make[1]: *** [/home/ardb/linux/Makefile:2011: .] Error 2
make: *** [/home/ardb/linux/Makefile:248: __sub-make] Error 2
So use obj-y from arch.x86/Kbuild instead, which makes things work as
expected.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-42-ardb+git@google.com
This reverts commit
faf0ed4874 ("x86/boot: Reject absolute references in .head.text")
The startup code is checked directly for the absence of absolute symbol
references, so checking the .head.text section in the relocs tool is no
longer needed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-41-ardb+git@google.com
Invoke objtool on each startup code object individually to check for the
absence of absolute relocations. This is needed because this code will
be invoked from the 1:1 mapping of memory before those absolute virtual
addresses (which are derived from the kernel virtual base address
provided to the linker and possibly shifted at boot) are mapped.
Only objects built under arch/x86/boot/startup/ have this restriction,
and once they have been incorporated into vmlinux.o, this distinction is
difficult to make. So force the invocation of objtool for each object
file individually, even if objtool is deferred to vmlinux.o for the rest
of the build. In the latter case, only pass --noabs and nothing else;
otherwise, append it to the existing objtool command line.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-40-ardb+git@google.com
The x86 startup code must not use absolute references to code or data,
as it executes before the kernel virtual mapping is up.
Add an action to objtool to check all allocatable sections (with the
exception of __patchable_function_entries, which uses absolute
references for nebulous reasons) and raise an error if any absolute
references are found.
Note that debug sections typically contain lots of absolute references
too, but those are not allocatable so they will be ignored.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/20250828102202.1849035-39-ardb+git@google.com
Create aliases that expose routines that are part of the startup code to
other code in the core kernel, so that they can be called later as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-38-ardb+git@google.com
Rename sev-nmi.c to noinstr.c, and move the get/put GHCB routines into it too,
which are also annotated as 'noinstr' and suffer from the same problem as the
NMI code, i.e., that GCC may ignore the __no_sanitize_address__ function
attribute implied by 'noinstr' and insert KASAN instrumentation anyway.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-37-ardb+git@google.com
Provide PIC aliases for data objects that are shared between the SEV startup
code and the SEV code that executes later. This is needed so that the confined
startup code is permitted to access them.
This requires some of these variables to be moved into a source file that is
not part of the startup code, as the PIC alias is already implied, and
exporting variables in the opposite direction is not supported.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-36-ardb+git@google.com
Provide PIC aliases for the global variables related to 5-level paging, so
that the startup code can access them in order to populate the kernel page
tables.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-35-ardb+git@google.com
snp_vmpl will be assigned a non-zero value when executing at a VMPL other than
0, and this is inferred from a call to RMPADJUST, which only works when
running at VMPL0.
This means that testing snp_vmpl is sufficient, and there is no need to
perform the same check again.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-34-ardb+git@google.com
To avoid having to reason about whether or not to use the per-CPU SVSM calling
area when running startup and init code on the boot CPU, reuse the boot SVSM
calling area as the per-CPU area for the BSP.
Thus, remove the need to make the per-CPU variables and associated state in
sev_cfg accessible to the startup code once confined.
[ bp: Massage commit message. ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-33-ardb+git@google.com
The early page state change API is mostly only used very early, when only the
boot time SVSM calling area is in use. However, this API is also called by the
kexec finishing code, which runs very late, and potentially from a different
CPU (which uses a different calling area).
To avoid pulling the per-CPU SVSM calling area pointers and related SEV state
into the startup code, refactor the page state change API so the SVSM calling
area virtual and physical addresses can be provided by the caller.
No functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-32-ardb+git@google.com
Both the decompressor and the SEV startup code implement the exact same
sequence for invoking the MSR based communication protocol to effectuate
a page state change.
Before tweaking the internal APIs used in both versions, merge them and
share them so those tweaks are only needed in a single place.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-31-ardb+git@google.com
The boottime SVSM calling area is used both by the startup code running from
a 1:1 mapping, and potentially later on running from the ordinary kernel
mapping.
This SVSM calling area is statically allocated, and so its physical address
doesn't change. However, its virtual address depends on the calling context
(1:1 mapping or kernel virtual mapping), and even though the variable that
holds the virtual address of this calling area gets updated from 1:1 address
to kernel address during the boot, it is hard to reason about why this is
guaranteed to be safe.
So instead, take the RIP-relative address of the boottime SVSM calling area
whenever its virtual address is required, and only use a global variable for
the physical address.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250828102202.1849035-30-ardb+git@google.com
Both the decompressor and the core kernel implement an early #VC handler,
which only deals with CPUID instructions, and full featured one, which can
handle any #VC exception.
The former communicates with the hypervisor using the MSR based protocol,
whereas the latter uses a shared GHCB page, which is configured a bit later
during the boot, when the kernel runs from its ordinary virtual mapping,
rather than the 1:1 mapping that the startup code uses.
Accessing this shared GHCB page from the core kernel's startup code is
problematic, because it involves converting the GHCB address provided by the
caller to a physical address. In the startup code, virtual to physical address
translations are problematic, given that the virtual address might be a 1:1
mapped address, and such translations should therefore be avoided.
This means that exposing startup code dealing with the GHCB to callers that
execute from the ordinary kernel virtual mapping should be avoided too. So
move all GHCB page based communication out of the startup code, now that all
communication occurring before the kernel virtual mapping is up relies on the
MSR protocol only.
As an exception, add a flag representing the need to apply the coherency
fix in order to avoid exporting CPUID* helpers because of the code
running too early for the *cpu_has* infrastructure.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250828102202.1849035-29-ardb+git@google.com
The "if" condition is also part of the "while" condition, remove the
"if" to reduce the amount of code.
Reported-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-12-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change tree nodes to having a value of either Metric or PmuEvent,
these values have the ability to match searches, be parsed to create
evlists and to give a value per CPU and per thread to display.
Use perf.metrics to generate a tree of metrics. Most metrics are placed
under their metric group, if the metric group name ends with '_group'
then the metric group is placed next to the associated metric.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-11-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The metrics function returns a list dictionaries describing metrics as
strings mapping to strings, except for metric groups that are a string
mapping to a list of strings. For example:
```
>>> import perf
>>> perf.metrics()[0]
{'MetricGroup': ['Power'], 'MetricName': 'C10_Pkg_Residency',
'PMU': 'default_core', 'MetricExpr': 'cstate_pkg@c10\\-residency@ / TSC',
'ScaleUnit': '100%', 'BriefDescription': 'C10 residency percent per package'}
```
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-10-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a compute_metric function that computes a metric double value for a
given evlist, metric name, CPU and thread. For example:
```
>>> import perf
>>> x = perf.parse_metrics("TopdownL1")
>>> x.open()
>>> x.enable()
>>> x.disable()
>>> x.metrics()
['tma_bad_speculation', 'tma_frontend_bound', 'tma_backend_bound', 'tma_retiring']
>>> x.compute_metric('tma_bad_speculation', 0, -1)
0.08605342847131037
```
Committer notes:
Initialize thread_idx and cpu_idx to zero as albeit them not possibly
coming out unitialized from the loop as mexp would be not NULL only if
they were initialized, some older compilers don't notice that and error
with:
GEN /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so
/git/perf-6.17.0-rc3/tools/perf/util/python.c: In function ‘pyrf_evlist__compute_metric’:
/git/perf-6.17.0-rc3/tools/perf/util/python.c:1363:3: error: ‘thread_idx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
evsel__read_counter(metric_events[i], cpu_idx, thread_idx);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/git/perf-6.17.0-rc3/tools/perf/util/python.c:1389:41: note: ‘thread_idx’ was declared here
int ret, cpu = 0, cpu_idx, thread = 0, thread_idx;
^~~~~~~~~~
/git/perf-6.17.0-rc3/tools/perf/util/python.c:1363:3: error: ‘cpu_idx’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
evsel__read_counter(metric_events[i], cpu_idx, thread_idx);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/git/perf-6.17.0-rc3/tools/perf/util/python.c:1389:20: note: ‘cpu_idx’ was declared here
int ret, cpu = 0, cpu_idx, thread = 0, thread_idx;
^~~~~~~
/git/perf-6.17.0-rc3/tools/perf/util/python.c: At top level:
cc1: error: unrecognized command line option ‘-Wno-cast-function-type’ [-Werror]
cc1: all warnings being treated as errors
error: command 'gcc' failed with exit status 1
cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function returns a list of the names of metrics within the
evlist. For example:
```
>>> import perf
>>> perf.parse_metrics("TopdownL1").metrics()
['tma_bad_speculation', 'tma_frontend_bound', 'tma_backend_bound', 'tma_retiring']
```
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add parse_metrics function that takes a string of metrics and/or
metric groups and returns the evlist containing the events and
metrics.
For example:
```
>>> import perf
>>> perf.parse_metrics("TopdownL1")
evlist([cpu/TOPDOWN.SLOTS/,cpu/topdown-retiring/,cpu/topdown-fe-bound/,
cpu/topdown-be-bound/,cpu/topdown-bad-spec/,cpu/INT_MISC.CLEARS_COUNT/,
cpu/INT_MISC.UOP_DROPPING/])
```
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf ilist command is a textual app [1] similar to perf list. In
the top-left pane a tree of PMUs is displayed. Selecting a PMU expands
the events within it. Selecting an event displays the `perf list`
style event information in the top-right pane.
When an event is selected it is opened and the counters on each CPU
the event is for are periodically read. The bottom of the screen
contains a scrollable set of sparklines showing the events in total
and on each CPU. Scrolling below the sparklines shows the same data as
raw counts. The sparklines are small graphs where the height of the
bar is in relation to maximum of the other counts in the graph.
By default the counts are read with an interval of 0.1 seconds (10
times per second). A -I/--interval command line option allows the
interval to be changed. The oldest read counts are dropped when the
counts fill the line causing the sparkline to move from right to left.
A search box can be pulled up with the 's' key. 'n' and 'p' iterate
through the search results. As some PMUs have hundreds of events a 'c'
key will collapse the events in the current PMU to make navigating the
PMUs easier.
[1] https://textual.textualize.io/
Committer testing:
This needs a bit more polishing, to test it I had to go thru some hops:
$ python ilist
python: can't open file '/home/acme/git/perf-tools-next/ilist': [Errno 2] No such file or directory
$
$ python tools/perf/python/ilist.py
Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/ilist.py", line 8, in <module>
from textual import on
ModuleNotFoundError: No module named 'textual'
$
$ sudo dnf install textual
Updating and loading repositories:
Repositories loaded.
Failed to resolve the transaction:
No match for argument: textual
You can try to add to command line:
--skip-unavailable to skip unavailable packages
$
After some searching I installed the 'python3-textual' and it starts,
allowing traversing the various pmus and events, see descriptions on the
upper right side and a view of the events on the lower half of the
screen.
Interesting for quickly iterating thru the available events.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow all events on a PMU to be gathered, similar to how perf list
gathers event information.
An example usage:
```
$ python
Python 3.12.9 (main, Feb 5 2025, 01:31:18) [GCC 14.2.0] on linux
>>> import perf
>>> for pmu in perf.pmus():
... print(pmu.events())
...
[{'name': 'mem_load_retired.l3_hit', 'desc': 'Retired load instructions...
```
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracepoint function just returns the tracepoint id, this doesn't
require libtraceevent which is only used for parsing the event format
data.
Implement the function using the id function in tp_pmu. No current code
in perf is using this, the previous code migrated to perf.parse_events,
but it feels good to have less ifdef HAVE_LIBTRACEEVENT.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Returning NULL will cause the python interpreter to fail but not
report an error. If none wants to be returned then Py_None needs
returning.
Set the error for the cases returning NULL so that more meaningful
interpreter behavior is had.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Gautam Menghani <gautam@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Falcon <thomas.falcon@intel.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20250819013941.209033-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf's synthetic-events.c will ensure 8-byte alignment of tracing
data, writing it after a perf_record_header_tracing_data event.
Add padding to struct perf_record_header_tracing_data to make it 16-byte
rather than 12-byte sized.
Fixes: 055c67ed39 ("perf tools: Move event synthesizing routines to separate .c file")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250821163820.1132977-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In test_record_concurrent, as stderr is sent to /dev/null, error
messages are hidden. Change this to gather the error messages and dump
them on failure.
Some minor sh->bash changes to add some more diagnostics in
trap_cleanup.
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250821163820.1132977-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An evsel should typically have a leader of itself, however, in tests
like 'Sample parsing' a NULL leader may occur and the container_of
will return a corrupt pointer.
Avoid this with an explicit NULL test.
Fixes: fba7c86601 ("libperf: Move 'leader' from tools/perf to perf_evsel::leader")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250821163820.1132977-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Modify test behavior to skip if BPF calls fail with "Operation not
permitted".
Fixes: d66763fed3 ("perf test trace_btf_enum: Add regression test for the BTF augmentation of enums in 'perf trace'")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250821163820.1132977-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Incrementing NULL is undefined behavior and triggers ubsan during the
perf annotate test.
Split a compound statement over two lines to avoid this.
Fixes: 98f69a573c ("perf annotate: Split out util/disasm.c")
Reviewed-by: Collin Funk <collin.funk1@gmail.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250821163820.1132977-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PCIe and USB actually work, because the PCIe does share its lanes between
two ports and the usb needs to toggle a gpio to supply power.
The other interesting fix is the headphone detection on the Orange Pi 5+.
The rest are some added supplies to make the boot log less scary and a
number of styling fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmi4NDAQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXiZB/9r5AdLNI7FUVV9jPY7NrZTdWR9JW9EnVyp
EIEvmDoVDiLouB0DSf6jGtNOMoMRZoyUy2dXGjEIPDfIq/RrRzqKd+uWkxrtCRKB
TZ8SF+Sx8gwXjAYcenpdu9yPKKus8xvO/ge3khs7s0a0CGo3sXmazU2FZdv9y2og
SDVtk89bnvjW4gAkM0V4mr/BuAQbycMQDvdCSBUjXX7nIrMqCHFkjLaCfg8cRTiH
b7JFwYDrrTP0bAzhFjCWCQPTqvqRr0btLMyhFW+7vZlPCr99F6HUV5YQ1r197kPy
DoMs0durK3dV+P9MQHsD9qX9SBGKM3fBB+ftiR2aoIllkaCL/EF8
=x+X/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=m9dk
-----END PGP SIGNATURE-----
Merge tag 'v6.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
The newly added Rock 5T board needed slightly bigger fixes to make the
PCIe and USB actually work, because the PCIe does share its lanes between
two ports and the usb needs to toggle a gpio to supply power.
The other interesting fix is the headphone detection on the Orange Pi 5+.
The rest are some added supplies to make the boot log less scary and a
number of styling fixes.
* tag 'v6.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-pinebook-pro
arm64: dts: rockchip: mark eeprom as read-only for Radxa E52C
Link: https://lore.kernel.org/r/5909239.Y6S9NjorxK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, when a panel brightness quirk is applied, there is no log
indicating that a quirk was applied. Unwrap the drm device on its own
and use drm_info() to log when a quirk is applied.
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-7-lkml@antheas.dev
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
(Correct a missing -1 in the message math)
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
On the SteamOS kernel, Valve universally makes minimum brightness 0
for all devices. SteamOS is (was?) meant for the Steam Deck, so
enabling it universally is reasonable. However, it causes issues in
certain devices. Therefore, introduce it just for the Steam Deck here.
SteamOS kernel does not have a public mirror, but this replaces commit
806dd74bb225 ("amd/drm: override backlight min value from 12 -> 0")
in the latest, as of this writing, SteamOS kernel (6.11.11-valve24).
See unofficial mirror reconstructed from sources below.
Link: 806dd74bb2
Reviewed-by: Robert Beckett <bob.beckett@collabora.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://lore.kernel.org/r/20250829145541.512671-6-lkml@antheas.dev
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
