There's no corresponding call to platform_get_drvdata() or
dev_get_drvdata(). Remove the call to platform_set_drvdata() from
.probe().
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-4-356b4b1d5110@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no reason for this driver to touch the gpio-mmio internals, we
have a dedicated flag passed to bgpio_init() indicating to the module
that the DIR register is unreadable.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-3-356b4b1d5110@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Provide helpers wrapping the read_reg() and write_reg() callbacks of the
generic GPIO API that are called directly by many users. This is done to
hide their implementation ahead of moving them into the separate generic
GPIO struct.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250825-gpio-mmio-gpio-conv-v1-2-356b4b1d5110@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add #io-channel-cells property with a constant value of 1 because it is
multi-channel ADC.
Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dtb: adc@35 (maxim,max1239): '#io-channel-cells' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/maxim,max1238.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250818200014.3700738-1-Frank.Li@nxp.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
GPD devices originally used BMI160 sensors with the "BMI0160" PNP ID.
When they switched to BMI260 sensors in newer hardware, they reused
the existing Windows driver which accepts both "BMI0160" and "BMI0260"
IDs. Consequently, they kept "BMI0160" in DSDT tables for new BMI260
devices, causing driver mismatches in Linux.
1. GPD updated BIOS v0.40+[1] for newer devices to report "BMI0260" for
BMI260 sensors to avoid loading the bmi160 driver on Linux. While this
isn't Bosch's VID;
2. Bosch's official Windows driver uses "BMI0260" as a compatible ID
3. We're seeing real devices shipping with "BMI0260" in DSDT
The DSDT excerpt of GPD G1619-04 with BIOS v0.40:
Scope (_SB.I2CC)
{
Device (BMA2)
{
Name (_ADR, Zero) // _ADR: Address
Name (_HID, "BMI0260") // _HID: Hardware ID
Name (_CID, "BMI0260") // _CID: Compatible ID
Name (_DDN, "Accelerometer") // _DDN: DOS Device Name
Name (_UID, One) // _UID: Unique ID
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x0069, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2CC",
0x00, ResourceConsumer, , Exclusive,
)
})
Return (RBUF) /* \_SB_.I2CC.BMA2._CRS.RBUF */
}
# omit some noise
}
}
Link: http://download.softwincn.com/WIN%20Max%202024/Max2-7840-BIOS-V0.41.zip#1
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Alex Lanzano <lanzano.alex@gmail.com>
Link: https://patch.msgid.link/20250821-bmi270-gpd-acpi-v4-1-5279b471d749@uniontech.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are two problems with the chip configuration in this driver:
- First, is that writing 12 bytes (ARRAY_SIZE(regs)) would anyhow
lead to a config overflow due to HW auto increment implementation
in the chip.
- Second, the i2c_smbus_write_block_data write ends up in writing
unexpected value to the channel_dis register, this is because
the smbus size that is 0x03 in this case gets written to the
register. The PAC1931/2/3/4 data sheet does not really specify
that block write is indeed supported.
This problem is probably not visible on PAC1934 version where all
channels are used as the chip is properly configured by luck,
but in our case whenusing PAC1931 this leads to nonfunctional device.
Fixes: 0fb528c825 (iio: adc: adding support for PAC193x)
Suggested-by: Rene Straub <mailto:rene.straub@belden.com>
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com>
Reviewed-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://patch.msgid.link/20250811130904.2481790-1-aleksandar.gerasimovski@belden.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace calls of devm_kzalloc() with devm_kcalloc() in scmi_alloc_iiodev()
and scmi_iio_set_sampling_freq_avail() for safer memory allocation with
built-in overflow protection.
Similarly, use array_size() instead of explicit multiplication for
'sensor->sensor_info->intervals.count * 2'.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250819125017.635182-1-rongqianfeng@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
dt-bindings documentation for this driver claims to support
thermocouple-type, but the driver does not actually make use of
the property.
Implement usage of the property to configure the chip for the
selected thermocouple-type.
Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250822-upstream-changes-v8-5-40bb1739e3e2@watter.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current driver works with mcp9601, but emits a warning because it
does not recognize the chip id.
MCP9601 is a superset of MCP9600. The drivers works without changes
on this chipset.
However, the 9601 chip supports open/closed-circuit detection if wired
properly, so we'll need to be able to differentiate between them.
Moved "struct mcp9600_data" up in the file since a later patch will
need it and chip_info before the declarations.
Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250822-upstream-changes-v8-4-40bb1739e3e2@watter.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Make tabs consistent for register definitions and also fix width
to byte size.
Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <abdy@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibrc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20250822-upstream-changes-v8-3-40bb1739e3e2@watter.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add microchip,mcp9601 compatible in addition to the original
microchip,mcp9600 to designate support between these two chips.
The current dt-binding has open-circuit and short-circuit as interrupt
names, but these are only supported in mcp9601.
The OC and SC detection requires that mcp9601 VSENSE be wired up, which
not only enables the OC SC interrupts, but also the OC and SC status
register bits.
Add a microchip,vsense boolean to show the chip is wired for this
support.
Add constraints so this feature only applies if the mcp9601 compatible
is selected.
Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250822-upstream-changes-v8-2-40bb1739e3e2@watter.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Document the clock property in sc7280 LPASS LPI pinctrl node.
Clock settings required for Audioreach solution.
The existing SC7280 platform only supports non-ADSP audio solutions.
To enable audio functionality on ADSP with the AudioReach solution.
additional core and audio hardware clocks must be configured.
Without these clocks, the ADSP will crash.
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Co-developed-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20250821044914.710044-3-quic_pkumpatl@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
apic_pending_intr_clear() is fundamentally voodoo programming. It's primary
purpose is to clear stale ISR bits in the local APIC, which would otherwise
lock the corresponding interrupt priority level.
The comments and the implementation claim falsely that after clearing the
stale ISR bits, eventually stale IRR bits would be turned into ISR bits and
can be cleared as well. That's just wishful thinking because:
1) If interrupts are disabled, the APIC does not propagate an IRR bit to
the ISR.
2) If interrupts are enabled, then the APIC propagates the IRR bit to the
ISR and raises the interrupt in the CPU, which means that code _cannot_
observe the ISR bit for any of those IRR bits.
Rename the function to reflect the purpose and make exactly _one_ attempt
to EOI the pending ISR bits and add comments why traversing the pending bit
map in low to high priority order is correct.
Instead of trying to "clear" IRR bits, simply print a warning message when
the IRR is not empty.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/871ppwih4s.ffs@tglx
Introduce virt/ directory to collect virtchnl files.
We are going to implement a few sizable extensions soon, each of them
increasing virt/ size, so it looks sensible to introduce a new dir.
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As is already documented in this file, Type-K is the default, so make
that explicit in the dt-bindings.
Signed-off-by: Ben Collins <bcollins@watter.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250822-upstream-changes-v8-1-40bb1739e3e2@watter.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev_err_probe() doesn't do anything when the error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Acked-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250821080723.525379-8-zhao.xichao@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev_err_probe() doesn't do anything when the error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250821080723.525379-7-zhao.xichao@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev_err_probe() doesn't do anything when the error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250821080723.525379-6-zhao.xichao@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev_err_probe() doesn't do anything when the error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250821080723.525379-5-zhao.xichao@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev_err_probe() doesn't do anything when the error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Gustavo Silva <gustavograzs@gmail.com> # for ens160
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250821080723.525379-4-zhao.xichao@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev_err_probe() doesn't do anything when the error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> # meson_saradc
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250821080723.525379-3-zhao.xichao@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The dev_err_probe() doesn't do anything when the error is '-ENOMEM'.
Therefore, remove the useless call to dev_err_probe(), and just return the
value instead.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250821080723.525379-2-zhao.xichao@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Anand left AMD/Xilinx some time ago. Salih and Connall are new
maintainers of xilinx-ams driver.
Signed-off-by: Salih Erim <salih.erim@amd.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: O'Griofa, Conall <conall.ogriofa@amd.com>
Link: https://patch.msgid.link/20250820100519.2272509-1-salih.erim@amd.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove the call to `dev_set_drvdata()` and the associated comment
since private data is never read.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/aKSRpTuwA0P-ZaUS@pc
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 65e8202f03 ("iio: Remove error prints for
devm_add_action_or_reset()") accidentally introduced a bug where we
returned "ret" but the error code was stored in "error" if
devm_add_action_or_reset() failed. Using two variables to store error
codes is unnecessary and confusing. Delete the "error" variable and use
"ret" everywhere instead.
Fixes: 65e8202f03 ("iio: Remove error prints for devm_add_action_or_reset()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/aKSSHTdJf5QoYiRx@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoid triggering a dereference of an error pointer on cleanup in
xe_vm_free_scratch() by clearing any scratch_pt error pointer.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 06951c2ee7 ("drm/xe: Use NULL PTEs as scratch PTEs")
Cc: Brian Welty <brian.welty@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821143045.106005-4-thomas.hellstrom@linux.intel.com
This member is set when exporting using prime. However
the xe_gem_prime_export() alone doesn't set it, since it's done
later in the prime export flow.
For the test, set it manually and remove the hack that set it
temporarily when it was really needed.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821143045.106005-3-thomas.hellstrom@linux.intel.com
The pinning has the odd side-effect that unlocking *any* resv
during validation triggers an "unlocking pinned lock" warning.
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: 9d5558649f ("drm/xe: Rework eviction rejection of bound external bos")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821143045.106005-2-thomas.hellstrom@linux.intel.com
Currently we are ignoriong drm_dp_dpcd_read return values when reading PSR
and Panel Replay capability DPCD register. Rework intel_psr_dpcd a bit to
take care of checking the return value.
v2: use drm_dp_dpcd_read_data
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250821045918.17757-1-jouni.hogander@intel.com
Marking ufence as signalled after copy_to_user() is too late.
Worker thread which signals ufence by memory write might be raced
with another userspace vm-bind call. In map/unmap scenario unmap
may still see ufence is not signalled causing -EBUSY. Change the
order of marking / write to user-fence fixes this issue.
Fixes: 977e5b82e0 ("drm/xe: Expose user fence from xe_sync_entry")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5536
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250820083903.2109891-2-zbigniew.kempczynski@intel.com
The userspace load can put up to 2048 bits into an xlen bit stack
buffer. We want only xlen bits, so check the size beforehand.
Fixes: 2fa290372d ("RISC-V: KVM: add 'vlenb' Vector CSR")
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Link: https://lore.kernel.org/r/20250805104418.196023-4-rkrcmar@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, kvm_riscv_gstage_ioremap() is used to map IMSIC gpa to the
spa of IMSIC guest interrupt file.
The PAGE_KERNEL_IO property includes global setting whereas it does not
include user mode settings, so when accessing the IMSIC address in the
virtual machine, a guest page fault will occur, this is not expected.
According to the RISC-V Privileged Architecture Spec, for G-stage address
translation, all memory accesses are considered to be user-level accesses
as though executed in U-mode.
Fixes: 659ad6d82c ("RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Radim Krčmář <rkrcmar@ventanamicro.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://lore.kernel.org/r/20250807070729.89701-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
We need override certain link rates in favour of the next available
higher link rate. The Link rates that need to be overridden are
indicated by a mask in VBT. To make sure these modes are skipped we
don't add them in them in the sink rates array.
--v2
-Update the link rates after we have a final set of link rates [Ankit]
-Break this patch up [Ankit]
-Optimize the assingment during loop [Ankit]
--v3
-Add protection against broken VBTs [Jani]
--v4
-Fix build errors
-Create a seprate function to check if edp data override is selected
and using the correct vbt
--v5
-Use correct number to check the num of edp rates [Ankit]
--v6
-No seprate function check if vbt is broken in the reject rate function
[Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250821042653.269227-4-suraj.kandpal@intel.com
Add a function that helps identify if the rate provided needs to
be overridden. For this we need a function that compares the rate
provided and bitmask of rates provided in VBT.
--v2
-Rename functions [Jani]
-Return the mask instead of parsing it in function [Jani]
-Move the declaration in header [Jani]
--v3
-Change function name to depict what the function does [Ankit]
--v4
-Lets not use hweight [Ankit]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250821042653.269227-3-suraj.kandpal@intel.com
Add edp_data_rate_override field VBT which gives us a mask
of rates which needs to be skipped in favour of
subsequent higher rate.
--v2
-Rename vbt field [Jani]
-Fix comment to 263+ [Jani]
-Use BIT_U32 [Jani]
-Fix the bits assignment in vbt [Jani]
--v3
-Add a mask which represents all link rates [Ankit]
Bspec: 20124
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250821042653.269227-2-suraj.kandpal@intel.com
