commit b6c3af46c2 upstream.
When code had been changed to use for_each_set_clump8(), it mistakenly
switched from chip->nport to chip->tpin since the cy8c9540 and cy8c9560
have a 4-pin gap. This, in particular, led to the missed read of
the last bank interrupt status register and hence missing interrupts
on those pins. Restore the upper limit in for_each_set_clump8() to take
into consideration that gap.
Fixes: 83e29a7a1f ("pinctrl: cy8c95x0; Switch to use for_each_set_clump8()")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a75281626f upstream.
The current code checks 'i + 5 < in_len' at the end of the if statement.
However, it accesses 'in_ie[i + 5]' before that check, which can lead
to an out-of-bounds read. Move the length check to the beginning of the
conditional to ensure the index is within bounds before accessing the
array.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260224132647.11642-2-luka.gejak@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0109b9d3e upstream.
Just like in commit 154828bf95 ("staging: rtl8723bs: fix out-of-bounds
read in rtw_get_ie() parser"), we don't trust the data in the frame so
we should check the length better before acting on it
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Tested-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Navaneeth K <knavaneeth786@gmail.com>
Link: https://patch.msgid.link/2026022336-arrange-footwork-6e54@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8225489ddb upstream.
hw_sm750_map() calls pci_request_region() but never releases the
region on error paths or in lynxfb_pci_remove(). This causes a
resource leak that prevents the PCI region from being mapped again
after driver removal or a failed probe. A TODO comment in the code
acknowledges this missing cleanup.
Restructure the error handling in hw_sm750_map() to properly release
the PCI region on ioremap failures, and add pci_release_region() to
lynxfb_pci_remove().
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260216202038.1828-1-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8dafa9f590 upstream.
obj_exts_alloc_size() prevents recursive allocation of slabobj_ext
array from the same cache, to avoid creating slabs that are never freed.
There is one mistake that returns the original size when memory
allocation profiling is disabled. The assumption was that
memcg-triggered slabobj_ext allocation is always served from
KMALLOC_CGROUP type. But this is wrong [1]: when the caller specifies
both __GFP_RECLAIMABLE and __GFP_ACCOUNT with SLUB_TINY enabled, the
allocation is served from normal kmalloc. This is because kmalloc_type()
prioritizes __GFP_RECLAIMABLE over __GFP_ACCOUNT, and SLUB_TINY aliases
KMALLOC_RECLAIM with KMALLOC_NORMAL.
As a result, the recursion guard is bypassed and the problematic slabs
can be created. Fix this by removing the mem_alloc_profiling_enabled()
check entirely. The remaining is_kmalloc_normal() check is still
sufficient to detect whether the cache is of KMALLOC_NORMAL type and
avoid bumping the size if it's not.
Without SLUB_TINY, no functional change intended.
With SLUB_TINY, allocations with __GFP_ACCOUNT|__GFP_RECLAIMABLE
now allocate a larger array if the sizes equal.
Reported-by: Zw Tang <shicenci@gmail.com>
Fixes: 280ea9c315 ("mm/slab: avoid allocating slabobj_ext array from its own slab")
Closes: https://lore.kernel.org/linux-mm/CAPHJ_VKuMKSke8b11AZQw1PTSFN4n2C0gFxC6xGOG0ZLHgPmnA@mail.gmail.com [1]
Cc: stable@vger.kernel.org
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260309072219.22653-1-harry.yoo@oracle.com
Tested-by: Zw Tang <shicenci@gmail.com>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d210fdcac9 upstream.
damos_walk() sets ctx->walk_control to the caller-provided control
structure before checking whether the context is running. If the context
is inactive (damon_is_running() returns false), the function returns
-EINVAL without clearing ctx->walk_control. This leaves a dangling
pointer to a stack-allocated structure that will be freed when the caller
returns.
This is structurally identical to the bug fixed in commit f9132fbc2e
("mm/damon/core: remove call_control in inactive contexts") for
damon_call(), which had the same pattern of linking a control object and
returning an error without unlinking it.
The dangling walk_control pointer can cause:
1. Use-after-free if the context is later started and kdamond
dereferences ctx->walk_control (e.g., in damos_walk_cancel()
which writes to control->canceled and calls complete())
2. Permanent -EBUSY from subsequent damos_walk() calls, since the
stale pointer is non-NULL
Nonetheless, the real user impact is quite restrictive. The
use-after-free is impossible because there is no damos_walk() callers who
starts the context later. The permanent -EBUSY can actually confuse
users, as DAMON is not running. But the symptom is kept only while the
context is turned off. Turning it on again will make DAMON internally
uses a newly generated damon_ctx object that doesn't have the invalid
damos_walk_control pointer, so everything will work fine again.
Fix this by clearing ctx->walk_control under walk_control_lock before
returning -EINVAL, mirroring the fix pattern from f9132fbc2e.
Link: https://lkml.kernel.org/r/20260224011102.56033-1-sj@kernel.org
Fixes: bf0eaba0ff ("mm/damon/core: implement damos_walk()")
Reported-by: Raul Pazemecxas De Andrade <raul_pazemecxas@hotmail.com>
Closes: https://lore.kernel.org/CPUPR80MB8171025468965E583EF2490F956CA@CPUPR80MB8171.lamprd80.prod.outlook.com
Signed-off-by: Raul Pazemecxas De Andrade <raul_pazemecxas@hotmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit feae40a6a1 upstream.
It may happen that VF spawned for E610 adapter has problem with setting
link up. This happens when ixgbevf supporting mailbox API 1.6 cooperates
with PF driver which doesn't support this version of API, and hence
doesn't support new approach for getting PF link data.
In that case VF asks PF to provide link data but as PF doesn't support
it, returns -EOPNOTSUPP what leads to early bail from link configuration
sequence.
Avoid such situation by using legacy VFLINKS approach whenever negotiated
API version is less than 1.6.
To reproduce the issue just create VF and set its link up - adapter must
be any from the E610 family, ixgbevf must support API 1.6 or higher while
ixgbevf must not.
Fixes: 53f0eb62b4 ("ixgbevf: fix getting link speed data for E610 devices")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 201ceb94aa upstream.
Fix a bug where kunit_run_irq_test() could hang if the system is too
slow. This was noticed with the crypto library tests in certain VMs.
Specifically, if kunit_irq_test_timer_func() and the associated hrtimer
code took over 5us to run, then the CPU would spend all its time
executing that code in hardirq context. As a result, the task executing
kunit_run_irq_test() never had a chance to run, exit the loop, and
cancel the timer.
To fix it, make kunit_irq_test_timer_func() increase the timer interval
when the other contexts aren't having a chance to run.
Fixes: 950a81224e ("lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py")
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <david@davidgow.net>
Link: https://lore.kernel.org/r/20260224033751.97615-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 326256c0a7 upstream.
Add retry mechanism for indirect Admin Queue (AQ) commands. To do so we
need to keep the command buffer.
This technically reverts commit 43a630e37e
("ice: remove unused buffer copy code in ice_sq_send_cmd_retry()"),
but combines it with a fix in the logic by using a kmemdup() call,
making it more robust and less likely to break in the future due to
programmer error.
Cc: Michal Schmidt <mschmidt@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 3056df93f7 ("ice: Re-send some AQ commands, as result of EBUSY AQ error")
Signed-off-by: Jakub Staniszewski <jakub.staniszewski@linux.intel.com>
Co-developed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d320f160aa upstream.
Filesystems should never provide a delayed allocation mapping to
writeback; they're supposed to allocate the space before replying.
This can lead to weird IO errors and crashes in the block layer if the
filesystem is being malicious, or if it hadn't set iomap->dev because
it's a delalloc mapping.
Fix this by failing writeback on delalloc mappings. Currently no
filesystems actually misbehave in this manner, but we ought to be
stricter about things like that.
Cc: stable@vger.kernel.org # v5.5
Fixes: 598ecfbaa7 ("iomap: lift the xfs writeback code to iomap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20260302173002.GL13829@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f15fb3d415 upstream.
Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL,
we're not freeing the chunk map that we've just looked up.
Fixes: 0ae653fbec ("btrfs: reduce chunk_map lookups in btrfs_map_block()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce9e40a9a5 upstream.
The ITS driver blindly assumes that EventIDs are in abundant supply, to the
point where it never checks how many the hardware actually supports.
It turns out that some pretty esoteric integrations make it so that only a
few bits are available, all the way down to a single bit.
Enforce the advertised limitation at the point of allocating the device
structure, and hope that the endpoint driver can deal with such limitation.
Fixes: 84a6a2e7fc ("irqchip: GICv3: ITS: device allocation and configuration")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260206154816.3582887-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2692c614f8 upstream.
When device_get_child_node_count() got split to the fwnode and device
respective APIs, the fwnode didn't inherit the ability to traverse over
the secondary fwnode. Hence any user, that switches from device to fwnode
API misses this feature. In particular, this was revealed by the commit
1490cbb9db ("device property: Split fwnode_get_child_node_count()")
that effectively broke the GPIO enumeration on Intel Galileo boards.
Fix this by moving the secondary lookup from device to fwnode API.
Note, in general no device_*() API should go into the depth of the fwnode
implementation.
Fixes: 114dbb4fa7 ("drivers property: When no children in primary, try secondary")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260210135822.47335-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92978c83bb upstream.
nfsd_nl_listener_set_doit() uses get_current_cred() without
put_cred().
As we can see from other callers, svc_xprt_create_from_sa()
does not require the extra refcount.
nfsd_nl_listener_set_doit() is always in the process context,
sendmsg(), and current->cred does not go away.
Let's use current_cred() in nfsd_nl_listener_set_doit().
Fixes: 16a4711774 ("NFSD: add listener-{set,get} netlink command")
Cc: stable@vger.kernel.org
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47a8aad135 upstream.
vm_get_page_prot() short-circuits the protection_map[] lookup for a
VM_SHADOW_STACK mapping since it uses a different PIE index from the
typical read/write/exec permissions. However, the side effect is that it
also ignores mprotect(PROT_NONE) by creating an accessible PTE.
Special-case the !(vm_flags & VM_ACCESS_FLAGS) flags to use the
protection_map[VM_NONE] permissions instead. No GCS attributes are
required for an inaccessible PTE.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 6497b66ba6 ("arm64/mm: Map pages for guarded control stack")
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad6fface76 upstream.
We don't check if cookies are available on the kprobe_multi link
before accessing them in show_fdinfo callback, we should.
Cc: stable@vger.kernel.org
Fixes: da7e9c0a7f ("bpf: Add show_fdinfo for kprobe_multi")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260225111249.186230-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d879ac6756 upstream.
When Linux is running as guest, runs a user space process and the
user space process accesses a page that the host has paged out,
the guest gets a pfault interrupt and schedules a different process.
Without this mechanism the host would have to suspend the whole
virtual CPU until the page has been paged in.
To setup the pfault interrupt the real address of parameter list
should be passed to DIAGNOSE 0x258, but a virtual address is passed
instead.
That has a performance impact, since the pfault setup never succeeds,
the interrupt is never delivered to a guest and the whole virtual CPU
is suspended as result.
Cc: stable@vger.kernel.org
Fixes: c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bfd757509 upstream.
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260219233516.2938172-5-shuicheng.lin@intel.com
(cherry picked from commit f939bdd920)
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cae66f1a1d upstream.
There is a race on checking the state in the sender, it needs to be
checked under a lock. But you also need a check to avoid issues with
a misbehaving BMC for run to completion mode. So leave the check at
the beginning for run to completion, and add a check under the lock
to avoid the race.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: bc3a9d2177 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec2cceadfa upstream.
Commit 86ef402d80 ("gpiolib: sanitize the return value of
gpio_chip::get()") started checking the return value of the .get()
callback in struct gpio_chip. Now - almost a year later - it turns out
that there are quite a few drivers in tree that can break with this
change. Partially revert it: normalize the return value in GPIO core but
also emit a warning.
Cc: stable@vger.kernel.org
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Closes: https://lore.kernel.org/all/aZSkqGTqMp_57qC7@google.com/
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260219-gpiolib-set-normalize-v2-1-f84630e45796@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb4a7139e9 upstream.
PORT_ALPM_CTL is supposed to be written only before link training. Remove
writing it from ALPM disable.
Also clearing ALPM_CTL_ALPM_AUX_LESS_ENABLE and is not about disabling ALPM
but switching to AUX-Wake ALPM. Stop touching this bit on ALPM disable.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7153
Fixes: 1ccbf13586 ("drm/i915/psr: Enable ALPM on source side for eDP Panel replay")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260212062731.397801-1-jouni.hogander@intel.com
(cherry picked from commit 008304c9ae)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9478c166c4 upstream.
These WARN_ONs seem to trigger a lot, and we don't seem to have a
plan to fix them, so just drop them, as they are most likely
harmless.
Cc: stable@vger.kernel.org
Fixes: 176fdcbddf ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20241121014601.229391-1-airlied@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52c9ee202e upstream.
If a BMC failure is detected, the current message is returned with an
error. However, if there was a waiting message, it would not be
handled.
Add a check for the waiting message after handling the current message.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Closes: https://lore.kernel.org/linux-acpi/CAK8fFZ58fidGUCHi5WFX0uoTPzveUUDzT=k=AAm4yWo3bAuCFg@mail.gmail.com/
Fixes: bc3a9d2177 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b87d51690 upstream.
Fallback to polling to detect hotplug events on systems without
interrupts.
On systems where the interrupt line of the bridge is not connected,
the bridge cannot notify hotplug events. Only add the
DRM_BRIDGE_OP_HPD flag if an interrupt has been registered
otherwise remain in polling mode.
Fixes: 55e8ff8420 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type")
Cc: stable@vger.kernel.org # 6.16: 9133bc3f05: drm/bridge: ti-sn65dsi86: Add
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
[dianders: Adjusted Fixes/stable line based on discussion]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260206123758.374555-1-fra.schnyder@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 803ec1faf7 upstream.
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration.
Fixes: e7447128ca ("drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260209184115.10937-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f895e5df80 upstream.
If the BMC is in a bad state, don't bother waiting for queues messages
since there can't be any. Otherwise the unload is blocked until the
BMC is back in a good state.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: bc3a9d2177 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b0d812971 upstream.
A workaround was introduced in commit 1fb710793c ("drm/amdgpu: Enable
MES lr_compute_wa by default") to help with some hangs observed in gfx1151.
This WA didn't fully fix the issue. It was actually fixed by adjusting
the VGPR size to the correct value that matched the hardware in commit
b42f3bf953 ("drm/amdkfd: bump minimum vgpr size for gfx1151").
There are reports of instability on other products with newer GC microcode
versions, and I believe they're caused by this workaround. As we don't
need the workaround any more, remove it.
Fixes: b42f3bf953 ("drm/amdkfd: bump minimum vgpr size for gfx1151")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9973e64bd6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64ac7c09fc upstream.
Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
v2: squash in Srini's fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fcec012c66)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49abfa8126 upstream.
Drop reference to syncobj and timeline fence when aborting the ioctl due
output array being too small.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: a292fdecd7 ("drm/amdgpu: Implement userqueue signal/wait IOCTL")
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68951e9c3e)
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea78f8c68f upstream.
Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit be267e15f9)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab39cc4cb8 upstream.
The update_cpu_qos_request() function attempts to initialize the 'freq'
variable by dereferencing 'cpudata' before verifying if the 'policy'
is valid.
This issue occurs on systems booted with the "nosmt" parameter, where
all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result,
any call to update_qos_requests() will result in a NULL pointer
dereference as the code will attempt to access pstate.turbo_freq using
the NULL cpudata pointer.
Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap()
after initializing the 'freq' variable, so it is better to defer the
'freq' until intel_pstate_get_hwp_cap() has been called.
Fix this by deferring the 'freq' assignment until after the policy and
driver_data have been validated.
Fixes: ae1bdd23b9 ("cpufreq: intel_pstate: Adjust frequency percentage computations")
Reported-by: Jirka Hladky <jhladky@redhat.com>
Closes: https://lore.kernel.org/all/CAE4VaGDfiPvz3AzrwrwM4kWB3SCkMci25nPO8W1JmTBd=xHzZg@mail.gmail.com/
Signed-off-by: David Arcari <darcari@redhat.com>
Cc: 6.18+ <stable@vger.kernel.org> # 6.18+
[ rjw: Added one paragraph to the changelog ]
Link: https://patch.msgid.link/20260224122106.228116-1-darcari@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28aaa9c399 upstream.
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly.
Reported-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20260224-mittlerweile-besessen-2738831ae7f6@brauner
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 4d13f4304f ("kthread: Implement preferred affinity")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d28ed588f upstream.
This change swapped out mod_node_page_state for lruvec_stat_add_folio.
But, these two APIs are not interchangeable: the lruvec version also
increments memcg stats, in addition to "global" pgdat stats.
So after this change, the "pagetables" memcg stat in memory.stat always
yields "0", which is a userspace visible regression.
I tried to look for a refactor where we add a variant of
lruvec_stat_mod_folio which takes a pgdat and a memcg instead of a folio,
to try to adhere to the spirit of the original patch. But at the end of
the day this just means we have to call folio_memcg(ptdesc_folio(ptdesc))
anyway, which doesn't really accomplish much.
This regression is visible in master as well as 6.18 stable, so CC stable
too.
Link: https://lkml.kernel.org/r/20260225002434.2953895-1-axelrasmussen@google.com
Fixes: f0c92726e8 ("ptdesc: remove references to folios from __pagetable_ctor() and pagetable_dtor()")
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b275bfaa1 upstream.
This reverts commit 1366cd228b.
The fwnode_usb_role_switch_get() returns NULL only if no connection is
found, returns ERR_PTR(-EPROBE_DEFER) if connection is found but deferred
probe is needed, or a valid pointer of usb_role_switch.
When switching from a NULL check to IS_ERR_OR_NULL(), usb_role_switch_get()
returns NULL and overwrites the ERR_PTR(-EPROBE_DEFER) returned by
fwnode_usb_role_switch_get(). This causes the deferred probe indication to
be lost, preventing the USB role switch from ever being retrieved.
Fixes: 1366cd228b ("tcpm: allow looking for role_sw device in the main node")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b0bd84c392 ]
In __ufshcd_wl_suspend(), cancel_delayed_work_sync() is called to cancel
the UFS RTC work, but it is placed after ufshcd_vops_suspend(hba, pm_op,
POST_CHANGE). This creates a race condition where ufshcd_rtc_work() can
still be running while ufshcd_vops_suspend() is executing. When
UFSHCD_CAP_CLK_GATING is not supported, the condition
!hba->clk_gating.active_reqs is always true, causing ufshcd_update_rtc()
to be executed. Since ufshcd_vops_suspend() typically performs clock
gating operations, executing ufshcd_update_rtc() at that moment triggers
an SError. The kernel panic trace is as follows:
Kernel panic - not syncing: Asynchronous SError Interrupt
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
panic+0x148/0x374
nmi_panic+0x3c/0x8c
arm64_serror_panic+0x64/0x8c
do_serror+0xc4/0xc8
el1h_64_error_handler+0x34/0x4c
el1h_64_error+0x68/0x6c
el1_interrupt+0x20/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
ktime_get+0xc4/0x12c
ufshcd_mcq_sq_stop+0x4c/0xec
ufshcd_mcq_sq_cleanup+0x64/0x1dc
ufshcd_clear_cmd+0x38/0x134
ufshcd_issue_dev_cmd+0x298/0x4d0
ufshcd_exec_dev_cmd+0x1a4/0x1c4
ufshcd_query_attr+0xbc/0x19c
ufshcd_rtc_work+0x10c/0x1c8
process_scheduled_works+0x1c4/0x45c
worker_thread+0x32c/0x3e8
kthread+0x120/0x1d8
ret_from_fork+0x10/0x20
Fix this by moving cancel_delayed_work_sync() before the call to
ufshcd_vops_suspend(hba, pm_op, PRE_CHANGE), ensuring the UFS RTC work is
fully completed or cancelled at that point.
Cc: Bean Huo <beanhuo@iokpp.de>
Fixes: 6bf999e0eb ("scsi: ufs: core: Add UFS RTC support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Wang Shuaiwei <wangshuaiwei1@xiaomi.com>
Link: https://patch.msgid.link/20260307035128.3419687-1-wangshuaiwei1@xiaomi.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9bbfb4bfa ]
It may happen that mm is already released, which leads to kernel panic.
This adds the NULL check for current->mm, similarly to
commit 20afc60f89 ("x86, perf: Check that current->mm is alive before getting user callchain").
I was getting this panic when running a profiling BPF program
(profile.py from bcc-tools):
[26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0)
[26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588
[26215.051952] Faulting instruction address: 0xc00000000020fac0
[26215.051957] Oops: Kernel access of bad area, sig: 11 [#1]
[...]
[26215.052049] Call Trace:
[26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable)
[26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30
[26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360
[26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0
[26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274
[...]
In addition, move storing the top-level stack entry to generic
perf_callchain_user to make sure the top-evel entry is always captured,
even if current->mm is NULL.
Fixes: 20002ded4d ("perf_counter: powerpc: Add callchain support")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Tested-by: Qiao Zhao <qzhao@redhat.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
[Maddy: fixed message to avoid checkpatch format style error]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260309144045.169427-1-vmalik@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f311a05784 ]
The DesignWare I3C master controller ACKs IBIs as soon as a valid
Device Address Table (DAT) entry is present. This can create a race
between device attachment (after DAA) and the point where the client
driver enables IBIs via i3c_device_enable_ibi().
Set DEV_ADDR_TABLE_SIR_REJECT in the DAT entry during
attach_i3c_dev() and reattach_i3c_dev() so that IBIs are rejected
by default. The bit is managed thereafter by the existing
dw_i3c_master_set_sir_enabled() function, which clears it in
enable_ibi() after ENEC is issued, and restores it in disable_ibi()
after DISEC.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/53f5b8cbdd8af789ec38b95b02873f32f9182dd6.1770962368.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 755a648e78 ]
The trace_clock_jiffies() function that handles the "uptime" clock for
tracing calls jiffies_64_to_clock_t(). This causes the function tracer to
constantly recurse when the tracing clock is set to "uptime". Mark it
notrace to prevent unnecessary recursion when using the "uptime" clock.
Fixes: 58d4e21e50 ("tracing: Fix wraparound problems in "uptime" trace clock")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260306212403.72270bb2@robin
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24d2d3c5f9 ]
Replace the bLength == 10 max_rate check in
focusrite_valid_sample_rate() with filtering that also examines the
bmControls VAL_ALT_SETTINGS bit.
When VAL_ALT_SETTINGS is readable, the device uses strict
per-altsetting rate filtering (only the highest rate pair for that
altsetting is valid). When it is not readable, all rates up to
max_rate are valid.
For devices without the bLength == 10 Format Type descriptor extension
but with VAL_ALT_SETTINGS readable and multiple altsettings (only seen
in Scarlett 18i8 3rd Gen playback), fall back to the Focusrite
convention: alt 1 = 48kHz, alt 2 = 96kHz, alt 3 = 192kHz.
This produces correct rate tables for all tested Focusrite devices
(all Scarlett 2nd, 3rd, and 4th Gen, Clarett+, and Vocaster) using
only USB descriptors, allowing QUIRK_FLAG_VALIDATE_RATES to be removed
for Focusrite in the next commit.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/7e18c1f393a6ecb6fc75dd867a2c4dbe135e3e22.1771594828.git.g@b4.vu
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 040d159a45 upstream.
Add __putname() calls to error code paths that did not free the "path"
pointer obtained by __getname(). If ownership of this pointer is not
passed to the caller via path_info.path, the function must free it
before returning.
Cc: stable@vger.kernel.org
Fixes: 3fd945a79e ("ceph: encode encrypted name in ceph_mdsc_build_path and dentry release")
Fixes: 550f7ca98e ("ceph: give up on paths longer than PATH_MAX")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 081a0b78ef upstream.
When `ceph_process_folio_batch` encounters a folio past the end of the
current object, it should leave it in the batch so that it is picked up
in the next iteration.
Removing the folio from the batch means that it does not get written
back and remains dirty instead. This makes `fsync()` silently skip some
of the data, delays capability release, and breaks coherence with
`O_DIRECT`.
The link below contains instructions for reproducing the bug.
Cc: stable@vger.kernel.org
Fixes: ce80b76dd3 ("ceph: introduce ceph_process_folio_batch() method")
Link: https://tracker.ceph.com/issues/75156
Signed-off-by: Hristo Venev <hristo@venev.name>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce0123cbb4 upstream.
During async unlink, we drop the `i_nlink` counter before we receive
the completion (that will eventually update the `i_nlink`) because "we
assume that the unlink will succeed". That is not a bad idea, but it
races against deletions by other clients (or against the completion of
our own unlink) and can lead to an underrun which emits a WARNING like
this one:
WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68
Modules linked in:
CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-ampere #655
Hardware name: Supermicro ARS-110M-NR/R12SPD-A, BIOS 1.1b 10/17/2023
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drop_nlink+0x50/0x68
lr : ceph_unlink+0x6c4/0x720
sp : ffff80012173bc90
x29: ffff80012173bc90 x28: ffff086d0a45aaf8 x27: ffff0871d0eb5680
x26: ffff087f2a64a718 x25: 0000020000000180 x24: 0000000061c88647
x23: 0000000000000002 x22: ffff07ff9236d800 x21: 0000000000001203
x20: ffff07ff9237b000 x19: ffff088b8296afc0 x18: 00000000f3c93365
x17: 0000000000070000 x16: ffff08faffcbdfe8 x15: ffff08faffcbdfec
x14: 0000000000000000 x13: 45445f65645f3037 x12: 34385f6369706f74
x11: 0000a2653104bb20 x10: ffffd85f26d73290 x9 : ffffd85f25664f94
x8 : 00000000000000c0 x7 : 0000000000000000 x6 : 0000000000000002
x5 : 0000000000000081 x4 : 0000000000000481 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff08727d3f91e8
Call trace:
drop_nlink+0x50/0x68 (P)
vfs_unlink+0xb0/0x2e8
do_unlinkat+0x204/0x288
__arm64_sys_unlinkat+0x3c/0x80
invoke_syscall.constprop.0+0x54/0xe8
do_el0_svc+0xa4/0xc8
el0_svc+0x18/0x58
el0t_64_sync_handler+0x104/0x130
el0t_64_sync+0x154/0x158
In ceph_unlink(), a call to ceph_mdsc_submit_request() submits the
CEPH_MDS_OP_UNLINK to the MDS, but does not wait for completion.
Meanwhile, between this call and the following drop_nlink() call, a
worker thread may process a CEPH_CAP_OP_IMPORT, CEPH_CAP_OP_GRANT or
just a CEPH_MSG_CLIENT_REPLY (the latter of which could be our own
completion). These will lead to a set_nlink() call, updating the
`i_nlink` counter to the value received from the MDS. If that new
`i_nlink` value happens to be zero, it is illegal to decrement it
further. But that is exactly what ceph_unlink() will do then.
The WARNING can be reproduced this way:
1. Force async unlink; only the async code path is affected. Having
no real clue about Ceph internals, I was unable to find out why the
MDS wouldn't give me the "Fxr" capabilities, so I patched
get_caps_for_async_unlink() to always succeed.
(Note that the WARNING dump above was found on an unpatched kernel,
without this kludge - this is not a theoretical bug.)
2. Add a sleep call after ceph_mdsc_submit_request() so the unlink
completion gets handled by a worker thread before drop_nlink() is
called. This guarantees that the `i_nlink` is already zero before
drop_nlink() runs.
The solution is to skip the counter decrement when it is already zero,
but doing so without a lock is still racy (TOCTOU). Since
ceph_fill_inode() and handle_cap_grant() both hold the
`ceph_inode_info.i_ceph_lock` spinlock while set_nlink() runs, this
seems like the proper lock to protect the `i_nlink` updates.
I found prior art in NFS and SMB (using `inode.i_lock`) and AFS (using
`afs_vnode.cb_lock`). All three have the zero check as well.
Cc: stable@vger.kernel.org
Fixes: 2ccb45462a ("ceph: perform asynchronous unlink if we have sufficient caps")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5a3737050 upstream.
Similar checks are performed for all control frames, but an early check
for message frames was missing. process_message() is already set up to
terminate the loop in case the state changes while con->ops->dispatch()
handler is being executed.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 770444611f upstream.
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. This is especially
relevant for num_mon. If the value read from the incoming message is
very large, it is interpreted as a negative value, and the check for
num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to
allocate a very large chunk of memory for monmap, which will most likely
fail. In this case, an unnecessary attempt to allocate memory is
performed, and -ENOMEM is returned instead of -EINVAL.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69fb5d91bb upstream.
If the message frame is (maliciously) corrupted in a way that the
length of the control segment ends up being less than the size of the
message header or a different frame is made to look like a message
frame, out-of-bounds reads may ensue in process_message_header().
Perform an explicit bounds check before decoding the message header.
Cc: stable@vger.kernel.org
Reported-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4c22b846e upstream.
While head_onwire_len() has a branch to handle ctrl_len == 0 case,
prepare_read_control() always sets up a kvec for the CRC meaning that
a non-empty control segment is effectively assumed. All frames that
clients deal with meet that assumption, so let's make it official and
treat the preamble with an empty control segment as malformed.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b282c43ed1 upstream.
This patch fixes an out-of-bounds access in ceph_handle_auth_reply()
that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In
ceph_handle_auth_reply(), the value of the payload_len field of such a
message is stored in a variable of type int. A value greater than
INT_MAX leads to an integer overflow and is interpreted as a negative
value. This leads to decrementing the pointer address by this value and
subsequently accessing it because ceph_decode_need() only checks that
the memory access does not exceed the end address of the allocation.
This patch fixes the issue by changing the data type of payload_len to
u32. Additionally, the data type of result_msg_len is changed to u32,
as it is also a variable holding a non-negative length.
Also, an additional layer of sanity checks is introduced, ensuring that
directly after reading it from the message, payload_len and
result_msg_len are not greater than the overall segment length.
BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph]
Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262
CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
print_report+0xd1/0x620
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? kasan_complete_mode_report_info+0x72/0x210
kasan_report+0xe7/0x130
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
__asan_report_load_n_noabort+0xf/0x20
ceph_handle_auth_reply+0x642/0x7a0 [libceph]
mon_dispatch+0x973/0x23d0 [libceph]
? apparmor_socket_recvmsg+0x6b/0xa0
? __pfx_mon_dispatch+0x10/0x10 [libceph]
? __kasan_check_write+0x14/0x30i
? mutex_unlock+0x7f/0xd0
? __pfx_mutex_unlock+0x10/0x10
? __pfx_do_recvmsg+0x10/0x10 [libceph]
ceph_con_process_message+0x1f1/0x650 [libceph]
process_message+0x1e/0x450 [libceph]
ceph_con_v2_try_read+0x2e48/0x6c80 [libceph]
? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph]
? save_fpregs_to_fpstate+0xb0/0x230
? raw_spin_rq_unlock+0x17/0xa0
? finish_task_switch.isra.0+0x13b/0x760
? __switch_to+0x385/0xda0
? __kasan_check_write+0x14/0x30
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
ceph_con_workfn+0x248/0x10c0 [libceph]
process_one_work+0x629/0xf80
? __kasan_check_write+0x14/0x30
worker_thread+0x87f/0x1570
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_try_to_wake_up+0x10/0x10
? kasan_print_address_stack_frame+0x1f7/0x280
? __pfx_worker_thread+0x10/0x10
kthread+0x396/0x830
? __pfx__raw_spin_lock_irq+0x10/0x10
? __pfx_kthread+0x10/0x10
? __kasan_check_write+0x14/0x30
? recalc_sigpending+0x180/0x210
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3f7/0x610
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x385/0xda0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
[ idryomov: replace if statements with ceph_decode_need() for
payload_len and result_msg_len ]
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
