[ Upstream commit cd1635d844 ]
When llbitmap bit state is still unwritten, any new write should force
rcw, as bitmap_ops->blocks_synced() is checked in handle_stripe_dirtying().
However, later the same check is missing in need_this_block(), causing
stripe to deadloop during handling because handle_stripe() will decide
to go to handle_stripe_fill(), meanwhile need_this_block() always return
0 and nothing is handled.
Link: https://lore.kernel.org/linux-raid/20260123182623.3718551-2-yukuai@fnnas.com
Fixes: 5ab829f197 ("md/md-llbitmap: introduce new lockless bitmap")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99582edb3f ]
In raid10_sync_request(), 'any_working' indicates if any IO will
be submitted. When there's only one In_sync disk with badblocks,
'any_working' might be set to 1 but no IO is submitted. Fix it by
setting 'any_working' after badblock checks.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-11-linan666@huaweicloud.com
Fixes: e875ecea26 ("md/raid10 record bad blocks as needed during recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d9f7150ac ]
Since commit f63f17350e ("md/raid5: use the atomic queue limit
update APIs"), the abort path in raid5_run() returns 'ret' instead of
-EIO. However, if log_init() fails, 'ret' is still 0 from the previous
successful call, causing raid5_run() to return success despite the
failure.
Fix this by capturing the return value from log_init().
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-2-yukuai@fnnas.com
Fixes: f63f17350e ("md/raid5: use the atomic queue limit update APIs")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601130531.LGfcZsa4-lkp@intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9635c586a5 ]
After commit be0a3600aa ("thermal: sysfs: Rework the handling of trip
point updates"), THERMAL_TEMP_INVALID can be passed to sys_set_trip_temp()
and it is treated as a regular temperature value there, so the sysfs
write fails even though it is expected to succeed and disable the given
trip point.
Address this by making sys_set_trip_temp() clear its temp variable when
it is equal to THERMAL_TEMP_INVALID.
Fixes: be0a3600aa ("thermal: sysfs: Rework the handling of trip point updates")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2815400.mvXUDI8C0e@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80606f4eb8 ]
After commit 5484e31bbb ("cpuidle: menu: Skip tick_nohz_get_sleep_length()
call in some cases"), if the return value of get_typical_interval()
multiplied by NSEC_PER_USEC is not greater than RESIDENCY_THRESHOLD_NS,
the menu governor will skip computing the time till the closest timer.
If that happens when the tick has been stopped already, the selected
idle state may be too deep due to the subsequent check comparing
predicted_ns with TICK_NSEC and causing its value to be replaced with
the expected time till the closest timer, which is KTIME_MAX in that
case. That will cause the deepest enabled idle state to be selected,
but the time till the closest timer very well may be shorter than the
target residency of that state, in which case a shallower state should
be used.
Address this by making menu_select() always compute the time till the
closest timer when the tick has been stopped.
Also move the predicted_ns check mentioned above into the branch in
which the time till the closest timer is determined because it only
needs to be done in that case.
Fixes: 5484e31bbb ("cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5959091.DvuYhMxLoT@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 649dd18f55 ]
Check if the passed in offset is negative once cast to sync->off. This
ensures that -EINVAL is returned for that case, like it would be for
sync_file_range(2).
Fixes: c992fe2925 ("io_uring: add fsync support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07f3c3a1cd ]
A previous commit got rid of any use of this member, but forgot to
remove it. Kill it.
Fixes: f4bb2f65bb ("io_uring/eventfd: move ctx->evfd_last_cq_tail into io_ev_fd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f851e03bce ]
Cover a missed execution path with a new check.
Fixes: 0acf24ad7e ("ACPICA: Add support for PCC Opregion special context data")
Link: f421dd9dd8
Signed-off-by: Alexey Simakov <bigalex934@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3030574.e9J7NaK4W3@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a8737e113 ]
io_uring_enter(), __io_msg_ring_data(), and io_msg_send_fd() read
ctx->flags and ctx->submitter_task without holding the ctx's uring_lock.
This means they may race with the assignment to ctx->submitter_task and
the clearing of IORING_SETUP_R_DISABLED from ctx->flags in
io_register_enable_rings(). Ensure the correct ordering of the
ctx->flags and ctx->submitter_task memory accesses by storing to
ctx->flags using release ordering and loading it using acquire ordering.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 4add705e4e ("io_uring: remove io_register_submitter")
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc8ea87143 ]
Dom0 inherit devices from the machine and is usually in PV mode.
If we are running in a virtual that has virtio devices, these devices
would be considered as using grants with Dom0 as backend, while being
the said Dom0 itself, while we want to use these devices like regular
PCI devices.
Fix this by preventing grant-dma-ops from being used when running as Dom0
(initial domain). We still keep the device-tree logic as-is.
Signed-off-by: Teddy Astie <teddy.astie@vates.tech>
Fixes: 61367688f1 ("xen/virtio: enable grant based virtio on x86")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <6698564dd2270a9f7377b78ebfb20cb425cabbe8.1767720955.git.teddy.astie@vates.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0089ce1c05 ]
Commit 7a8c994cbb ("ACPI: processor: idle: Optimize ACPI idle
driver registration") moved the ACPI idle driver registration to
acpi_processor_driver_init() and acpi_processor_power_init() does
not register an idle driver any more.
Accordingly, the cpuidle driver check in __acpi_processor_start() needs
to be updated to avoid calling acpi_processor_power_init() without a
cpuidle driver, in which case the registration of the cpuidle device
in that function would lead to a NULL pointer dereference in
__cpuidle_register_device().
Fixes: 7a8c994cbb ("ACPI: processor: idle: Optimize ACPI idle driver registration")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251223100914.2407069-4-lihuisong@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ac9690d4b ]
On rnbd-srv, the bi_size of the bio is set during the bio_add_page
function, to which datalen is passed. But for special IOs like DISCARD
and WRITE_ZEROES, datalen is 0, since there is no data to write. For
these special IOs, use the bi_size of the rnbd_msg_io.
Fixes: f6f84be089 ("block/rnbd-srv: Add sanity check and remove redundant assignment")
Signed-off-by: Florian-Ewald Mueller <florian-ewald.mueller@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5ca32d031 ]
This change fixes the instance of double incrementing of
retry_count. The increment of this count already happens
when netfs_reissue_write gets called. Incrementing this
value before is not necessary.
Fixes: 4acb665cf4 ("netfs: Work around recursion by abandoning retry if nothing read")
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebbbc4bfad ]
Zero out @err_iov and @err_buftype before retrying SMB2_open() to
prevent an UAF bug if @data != NULL, otherwise a double free.
Fixes: e3a4363302 ("smb/client: fix memory leak in smb2_open_file()")
Reported-by: David Howells <dhowells@redhat.com>
Closes: https://lore.kernel.org/r/2892312.1770306653@warthog.procyon.org.uk
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c134a40f86 ]
Compressed folios for ztailpacking pclusters must be valid before adding
these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster()
may assume they are already valid and then trigger a NULL pointer
dereference.
It is somewhat hard to reproduce because the inline data is in the same
block as the tail of the compressed indexes, which are usually read just
before. However, it may still happen if a fatal signal arrives while
read_mapping_folio() is running, as shown below:
erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : z_erofs_decompress_queue+0x4c8/0xa14
lr : z_erofs_decompress_queue+0x160/0xa14
sp : ffffffc08b3eb3a0
x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000
x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001
x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700
x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098
x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004
x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9
x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
z_erofs_decompress_queue+0x4c8/0xa14
z_erofs_runqueue+0x908/0x97c
z_erofs_read_folio+0x128/0x228
filemap_read_folio+0x68/0x128
filemap_get_pages+0x44c/0x8b4
filemap_read+0x12c/0x5b8
generic_file_read_iter+0x4c/0x15c
do_iter_readv_writev+0x188/0x1e0
vfs_iter_read+0xac/0x1a4
backing_file_read_iter+0x170/0x34c
ovl_read_iter+0xf0/0x140
vfs_read+0x28c/0x344
ksys_read+0x80/0xf0
__arm64_sys_read+0x24/0x34
invoke_syscall+0x60/0x114
el0_svc_common+0x88/0xe4
do_el0_svc+0x24/0x30
el0_svc+0x40/0xa8
el0t_64_sync_handler+0x70/0xbc
el0t_64_sync+0x1bc/0x1c0
Fix this by reading the inline data before allocating and adding
the pclusters to the I/O chains.
Fixes: cecf864d3d ("erofs: support inline data decompression")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-and-tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b14c5e04bd ]
I have been observing a number of systems aborting at
insert_dev_extents() in btrfs_create_pending_block_groups(). The
following is a sample stack trace of such an abort coming from forced
chunk allocation (typically behind CONFIG_BTRFS_EXPERIMENTAL) but this
can theoretically happen to any DUP chunk allocation.
[81.801] ------------[ cut here ]------------
[81.801] BTRFS: Transaction aborted (error -17)
[81.801] WARNING: fs/btrfs/block-group.c:2876 at btrfs_create_pending_block_groups+0x721/0x770 [btrfs], CPU#1: bash/319
[81.802] Modules linked in: virtio_net btrfs xor zstd_compress raid6_pq null_blk
[81.803] CPU: 1 UID: 0 PID: 319 Comm: bash Kdump: loaded Not tainted 6.19.0-rc6+ #319 NONE
[81.803] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
[81.804] RIP: 0010:btrfs_create_pending_block_groups+0x723/0x770 [btrfs]
[81.806] RSP: 0018:ffffa36241a6bce8 EFLAGS: 00010282
[81.806] RAX: 000000000000000d RBX: ffff8e699921e400 RCX: 0000000000000000
[81.807] RDX: 0000000002040001 RSI: 00000000ffffffef RDI: ffffffffc0608bf0
[81.807] RBP: 00000000ffffffef R08: ffff8e69830f6000 R09: 0000000000000007
[81.808] R10: ffff8e699921e5e8 R11: 0000000000000000 R12: ffff8e6999228000
[81.808] R13: ffff8e6984d82000 R14: ffff8e69966a69c0 R15: ffff8e69aa47b000
[81.809] FS: 00007fec6bdd9740(0000) GS:ffff8e6b1b379000(0000) knlGS:0000000000000000
[81.809] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[81.810] CR2: 00005604833670f0 CR3: 0000000116679000 CR4: 00000000000006f0
[81.810] Call Trace:
[81.810] <TASK>
[81.810] __btrfs_end_transaction+0x3e/0x2b0 [btrfs]
[81.811] btrfs_force_chunk_alloc_store+0xcd/0x140 [btrfs]
[81.811] kernfs_fop_write_iter+0x15f/0x240
[81.812] vfs_write+0x264/0x500
[81.812] ksys_write+0x6c/0xe0
[81.812] do_syscall_64+0x66/0x770
[81.812] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[81.813] RIP: 0033:0x7fec6be66197
[81.814] RSP: 002b:00007fffb159dd30 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
[81.815] RAX: ffffffffffffffda RBX: 00007fec6bdd9740 RCX: 00007fec6be66197
[81.815] RDX: 0000000000000002 RSI: 0000560483374f80 RDI: 0000000000000001
[81.816] RBP: 0000560483374f80 R08: 0000000000000000 R09: 0000000000000000
[81.816] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000002
[81.817] R13: 00007fec6bfb85c0 R14: 00007fec6bfb5ee0 R15: 00005604833729c0
[81.817] </TASK>
[81.817] irq event stamp: 20039
[81.818] hardirqs last enabled at (20047): [<ffffffff99a68302>] __up_console_sem+0x52/0x60
[81.818] hardirqs last disabled at (20056): [<ffffffff99a682e7>] __up_console_sem+0x37/0x60
[81.819] softirqs last enabled at (19470): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0
[81.819] softirqs last disabled at (19463): [<ffffffff999d2b46>] __irq_exit_rcu+0x96/0xc0
[81.820] ---[ end trace 0000000000000000 ]---
[81.820] BTRFS: error (device dm-7 state A) in btrfs_create_pending_block_groups:2876: errno=-17 Object already exists
Inspecting these aborts with drgn, I observed a pattern of overlapping
chunk_maps. Note how stripe 1 of the first chunk overlaps in physical
address with stripe 0 of the second chunk.
Physical Start Physical End Length Logical Type Stripe
----------------------------------------------------------------------------------------------------
0x0000000102500000 0x0000000142500000 1.0G 0x0000000641d00000 META|DUP 0/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000641d00000 META|DUP 1/2
0x0000000142500000 0x0000000182500000 1.0G 0x0000000601d00000 META|DUP 0/2
0x0000000182500000 0x00000001c2500000 1.0G 0x0000000601d00000 META|DUP 1/2
Now how could this possibly happen? All chunk allocation is protected by
the chunk_mutex so racing allocations should see a consistent view of
the CHUNK_ALLOCATED bit in the chunk allocation extent-io-tree
(device->alloc_state as set by chunk_map_device_set_bits()) The tree
itself is protected by a spin lock, and clearing/setting the bits is
always protected by fs_info->mapping_tree_lock, so no race is apparent.
It turns out that there is a subtle bug in the logic regarding chunk
allocations that have happened in the current transaction, known as
"pending extents". The chunk allocation as defined in
find_free_dev_extent() is a loop which searches the commit root of the
dev_root and looks for gaps between DEV_EXTENT items. For those gaps, it
then checks alloc_state bitmap for any pending extents and adjusts the
hole that it finds accordingly. However, the logic in that adjustment
assumes that the first pending extent is the only one in that range.
e.g., given a layout with two non-consecutive pending extents in a hole
passed to dev_extent_hole_check() via *hole_start and *hole_size:
|----pending A----| real hole |----pending B----|
| candidate hole |
*hole_start *hole_start + *hole_size
the code incorrectly returns a "hole" from the end of pending extent A
until the passed in hole end, failing to account for pending B.
However, it is not entirely obvious that it is actually possible to
produce such a layout. I was able to reproduce it, but with some
contortions: I continued to use the force chunk allocation sysfs file
and I introduced a long delay (10 seconds) into the start of the cleaner
thread. I also prevented the unused bgs cleaning logic from ever
deleting metadata bgs. These help make it easier to deterministically
produce the condition but shouldn't really matter if you imagine the
conditions happening by race/luck. Allocations/frees can happen
concurrently with the cleaner thread preparing to process an unused
extent and both create some used chunks with an unused chunk
interleaved, all during one transaction. Then btrfs_delete_unused_bgs()
sees the unused one and clears it, leaving a range with several pending
chunk allocations and a gap in the middle.
The basic idea is that the unused_bgs cleanup work happens on a worker
so if we allocate 3 block groups in one transaction, then the cleaner
work kicked off by the previous transaction comes through and deletes
the middle one of the 3, then the commit root shows no dev extents and
we have the bad pattern in the extent-io-tree. One final consideration
is that the code happens to loop to the next hole if there are no more
extents at all, so we need one more dev extent way past the area we are
working in. Something like the following demonstrates the technique:
# push the BG frontier out to 20G
fallocate -l 20G $mnt/foo
# allocate one more that will prevent the "no more dev extents" luck
fallocate -l 1G $mnt/sticky
# sync
sync
# clear out the allocation area
rm $mnt/foo
sync
_cleaner
# let everything quiesce
sleep 20
sync
# dev tree should have one bg 20G out and the rest at the beginning..
# sort of like an empty FS but with a random sticky chunk.
# kick off the cleaner in the background, remember it will sleep 10s
# before doing interesting work
_cleaner &
sleep 3
# create 3 trivial block groups, all empty, all immediately marked as unused.
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
echo 1 > "$(_btrfs_sysfs_space_info $dev data)/force_chunk_alloc"
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
# let the cleaner thread definitely finish, it will remove the data bg
sleep 10
# this allocation sees the non-consecutive pending metadata chunks with
# data chunk gap of 1G and allocates a 2G extent in that hole. ENOSPC!
echo 1 > "$(_btrfs_sysfs_space_info $dev metadata)/force_chunk_alloc"
As for the fix, it is not that obvious. I could not see a trivial way to
do it even by adding backup loops into find_free_dev_extent(), so I
opted to change the semantics of dev_extent_hole_check() to not stop
looping until it finds a sufficiently big hole. For clarity, this also
required changing the helper function contains_pending_extent() into two
new helpers which find the first pending extent and the first suitable
hole in a range.
I attempted to clean up the documentation and range calculations to be
as consistent and clear as possible for the future.
I also looked at the zoned case and concluded that the loop there is
different and not to be unified with this one. As far as I can tell, the
zoned check will only further constrain the hole so looping back to find
more holes is acceptable. Though given that zoned really only appends, I
find it highly unlikely that it is susceptible to this bug.
Fixes: 1b98450816 ("Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole")
Reported-by: Dimitrios Apostolou <jimis@gmx.net>
Closes: https://lore.kernel.org/linux-btrfs/q7760374-q1p4-029o-5149-26p28421s468@tzk.arg/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a1f4264da ]
When the incompat flag EXTENT_TREE_V2 is set, we unconditionally add the
block group tree to the switch_commits list before calling
switch_commit_roots, as we do for the tree root and the chunk root.
However, the block group tree uses normal root dirty tracking and in any
transaction that does an allocation and dirties a block group, the block
group root will already be linked to a list by the dirty_list field and
this use of list_add_tail() is invalid and corrupts the prev/next
members of block_group_root->dirty_list.
This is apparent on a subsequent list_del on the prev if we enable
CONFIG_DEBUG_LIST:
[32.1571] ------------[ cut here ]------------
[32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538)
[32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607
[32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none)
[32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014
[32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x108/0x120
[32.1593] RSP: 0018:ffffaa288287fdd0 EFLAGS: 00010202
[32.1594] RAX: 0000000000000001 RBX: ffff95889326e800 RCX:ffff958890201538
[32.1596] RDX: ffff9588992bd538 RSI: ffff958890202538 RDI:ffffffff82a41e00
[32.1597] RBP: ffff958890202538 R08: ffffffff828fc1e8 R09:00000000ffffefff
[32.1599] R10: ffffffff8288c200 R11: ffffffff828e4200 R12:ffff958890201538
[32.1601] R13: ffff95889326e958 R14: ffff958895c24000 R15:ffff958890202538
[32.1603] FS: 00007f0c28eb5740(0000) GS:ffff958af2bd2000(0000)knlGS:0000000000000000
[32.1605] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[32.1607] CR2: 00007f0c28e8a3cc CR3: 0000000109942005 CR4:0000000000370ef0
[32.1609] Call Trace:
[32.1610] <TASK>
[32.1611] switch_commit_roots+0x82/0x1d0 [btrfs]
[32.1615] btrfs_commit_transaction+0x968/0x1550 [btrfs]
[32.1618] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[32.1621] __iterate_supers+0xe8/0x190
[32.1622] ? __pfx_sync_fs_one_sb+0x10/0x10
[32.1623] ksys_sync+0x63/0xb0
[32.1624] __do_sys_sync+0xe/0x20
[32.1625] do_syscall_64+0x73/0x450
[32.1626] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[32.1627] RIP: 0033:0x7f0c28d05d2b
[32.1632] RSP: 002b:00007ffc9d988048 EFLAGS: 00000246 ORIG_RAX:00000000000000a2
[32.1634] RAX: ffffffffffffffda RBX: 00007ffc9d988228 RCX:00007f0c28d05d2b
[32.1636] RDX: 00007f0c28e02301 RSI: 00007ffc9d989b21 RDI:00007f0c28dba90d
[32.1637] RBP: 0000000000000001 R08: 0000000000000001 R09:0000000000000000
[32.1639] R10: 0000000000000000 R11: 0000000000000246 R12:000055b96572cb80
[32.1641] R13: 000055b96572b19f R14: 00007f0c28dfa434 R15:000055b96572b034
[32.1643] </TASK>
[32.1644] irq event stamp: 0
[32.1644] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[32.1646] hardirqs last disabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1648] softirqs last enabled at (0): [<ffffffff81298817>]copy_process+0xb37/0x2260
[32.1650] softirqs last disabled at (0): [<0000000000000000>] 0x0
[32.1652] ---[ end trace 0000000000000000 ]---
Furthermore, this list corruption eventually (when we happen to add a
new block group) results in getting the switch_commits and
dirty_cowonly_roots lists mixed up and attempting to call update_root
on the tree root which can't be found in the tree root, resulting in a
transaction abort:
[87.8269] BTRFS critical (device nvme1n1): unable to find root key (1 0 0) in tree 1
[87.8272] ------------[ cut here ]------------
[87.8274] BTRFS: Transaction aborted (error -117)
[87.8275] WARNING: fs/btrfs/root-tree.c:153 at 0x0, CPU#4: sync/703
[87.8285] CPU: 4 UID: 0 PID: 703 Comm: sync Not tainted 6.18.0 #25 PREEMPT(none)
[87.8287] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-4.fc41 04/01/2014
[87.8289] RIP: 0010:btrfs_update_root+0x296/0x790 [btrfs]
[87.8295] RSP: 0018:ffffa58d035dfd60 EFLAGS: 00010282
[87.8297] RAX: ffff9a59126ddb68 RBX: ffff9a59126dc000 RCX: 0000000000000000
[87.8299] RDX: 0000000000000000 RSI: 00000000ffffff8b RDI: ffffffffc0b28270
[87.8301] RBP: ffff9a5904aec000 R08: 0000000000000000 R09: 00000000ffffefff
[87.8303] R10: ffffffff9ac8c200 R11: ffffffff9ace4200 R12: 0000000000000001
[87.8305] R13: ffff9a59041740e8 R14: ffff9a5904aec1f7 R15: ffff9a590fdefaf0
[87.8307] FS: 00007f54cde6b740(0000) GS:ffff9a5b5a81c000(0000) knlGS:0000000000000000
[87.8309] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[87.8310] CR2: 00007f54cde403cc CR3: 0000000112902004 CR4: 0000000000370ef0
[87.8312] Call Trace:
[87.8313] <TASK>
[87.8314] ? _raw_spin_unlock+0x23/0x40
[87.8315] commit_cowonly_roots+0x1ad/0x250 [btrfs]
[87.8317] ? btrfs_commit_transaction+0x79b/0x1560 [btrfs]
[87.8320] btrfs_commit_transaction+0x8aa/0x1560 [btrfs]
[87.8322] ? btrfs_attach_transaction_barrier+0x23/0x60 [btrfs]
[87.8325] __iterate_supers+0xf1/0x170
[87.8326] ? __pfx_sync_fs_one_sb+0x10/0x10
[87.8327] ksys_sync+0x63/0xb0
[87.8328] __do_sys_sync+0xe/0x20
[87.8329] do_syscall_64+0x73/0x450
[87.8330] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[87.8331] RIP: 0033:0x7f54cdd05d2b
[87.8336] RSP: 002b:00007fff1b58ff78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a2
[87.8338] RAX: ffffffffffffffda RBX: 00007fff1b590158 RCX: 00007f54cdd05d2b
[87.8340] RDX: 00007f54cde02301 RSI: 00007fff1b592b66 RDI: 00007f54cddba90d
[87.8342] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[87.8344] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e07ca96b80
[87.8346] R13: 000055e07ca9519f R14: 00007f54cddfa434 R15: 000055e07ca95034
[87.8348] </TASK>
[87.8348] irq event stamp: 0
[87.8349] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[87.8351] hardirqs last disabled at (0): [<ffffffff99698797>] copy_process+0xb37/0x21e0
[87.8353] softirqs last enabled at (0): [<ffffffff99698797>] copy_process+0xb37/0x21e0
[87.8355] softirqs last disabled at (0): [<0000000000000000>] 0x0
[87.8357] ---[ end trace 0000000000000000 ]---
[87.8358] BTRFS: error (device nvme1n1 state A) in btrfs_update_root:153: errno=-117 Filesystem corrupted
[87.8360] BTRFS info (device nvme1n1 state EA): forced readonly
[87.8362] BTRFS warning (device nvme1n1 state EA): Skipping commit of aborted transaction.
[87.8364] BTRFS: error (device nvme1n1 state EA) in cleanup_transaction:2037: errno=-117 Filesystem corrupted
Since the block group tree was pulled out of the extent tree and uses
normal root dirty tracking, remove the offending extra list_add. This
fixes the list corruption and the resulting fs corruption.
Fixes: 14033b08a0 ("btrfs: don't save block group root into super block")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51b1fcf71c ]
If we fail to delete the second qgroup relation item, we end up returning
success or -ENOENT in case the first item does not exist, instead of
returning the error from the second item deletion.
Fixes: 73798c465b ("btrfs: qgroup: Try our best to delete qgroup relations")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39b26e017 ]
In case of a zoned RAID, it can happen that a data write is targeting a
sequential write required zone and a conventional zone. In this case the
bio will be marked as REQ_OP_ZONE_APPEND but for the conventional zone,
this needs to be REQ_OP_WRITE.
The setting of REQ_OP_ZONE_APPEND is deferred to the last possible time in
btrfs_submit_dev_bio(), but the decision if we can use zone append is
cached in btrfs_bio.
CC: Naohiro Aota <naohiro.aota@wdc.com>
Fixes: e9b9b911e0 ("btrfs: add raid stripe tree to features enabled with debug config")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd57c78aec ]
[ENHANCEMENT]
Btrfs currently calculates data checksums then submits the bio.
But after commit 968f19c5b1 ("btrfs: always fallback to buffered write
if the inode requires checksum"), any writes with data checksum will
fallback to buffered IO, meaning the content will not change during
writeback.
This means we're safe to calculate the data checksum and submit the bio
in parallel, and only need the following new behavior:
- Wait the csum generation to finish before calling btrfs_bio::end_io()
Or this can lead to use-after-free for the csum generation worker.
- Save the current bi_iter for csum_one_bio()
As the submission part can advance btrfs_bio::bio.bi_iter, if not
saved csum_one_bio() may got an empty bi_iter and do not generate any
checksum.
Unfortunately this means we have to increase the size of btrfs_bio for
16 bytes, but this is still acceptable.
As usual, such new feature is hidden behind the experimental flag.
[THEORETIC ANALYZE]
Consider the following theoretic hardware performance, which should be
more or less close to modern mainstream hardware:
Memory bandwidth: 50GiB/s
CRC32C bandwidth: 45GiB/s
SSD bandwidth: 8GiB/s
Then write bandwidth with data checksum before the patch is:
1 / ( 1 / 50 + 1 / 45 + 1 / 8) = 5.98 GiB/s
After the patch, the bandwidth is:
1 / ( 1 / 50 + max( 1 / 45 + 1 / 8)) = 6.90 GiB/s
The difference is 15.32% improvement.
[REAL WORLD BENCHMARK]
I'm using a Zen5 (HX 370) as the host, the VM has 4GiB memory, 10 vCPUs, the
storage is backed by a PCIe gen3 x4 NVMe.
The test is a direct IO write, with 1MiB block size, write 7GiB data
into a btrfs mount with data checksum. Thus the direct write will
fallback to buffered one:
Vanilla Datasum: 1619.97 GiB/s
Patched Datasum: 1792.26 GiB/s
Diff +10.6 %
In my case, the bottleneck is the storage, thus the improvement is not
reaching the theoretic one, but still some observable improvement.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: b39b26e017 ("btrfs: zoned: don't zone append to conventional zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4591c3ef75 ]
[BACKGROUND]
Btrfs has a lot of different bi_end_io functions, to handle different
raid profiles. But they introduced a lot of different contexts for
btrfs_bio::end_io() calls:
- Simple read bios
Run in task context, backed by either endio_meta_workers or
endio_workers.
- Simple write bios
Run in IRQ context.
- RAID56 write or rebuild bios
Run in task context, backed by rmw_workers.
- Mirrored write bios
Run in irq context.
This is inconsistent, and contributes to the number of workqueues used
in btrfs.
[ENHANCEMENT]
Make all the above bios call their btrfs_bio::end_io() in task context,
backed by either endio_meta_workers for metadata, or endio_workers for
data.
For simple write bios, merge the handling into simple_end_io_work().
For mirrored write bios, it will be a little more complex, since both
the original or the cloned bios can run the final btrfs_bio::end_io().
Here we make sure the cloned bios are using btrfs_bioset, to reuse the
end_io_work, and run both original and cloned work inside the workqueue.
Add extra ASSERT()s to make sure btrfs_bio_end_io() is running in task
context.
This not only unifies the context for btrfs_bio::end_io() functions, but
also opens a new door for further btrfs_bio::end_io() related cleanups.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: b39b26e017 ("btrfs: zoned: don't zone append to conventional zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81cea6cd70 ]
Currently there is only one caller which doesn't populate
btrfs_bio::inode, and that's scrub.
The idea is scrub doesn't want any automatic csum verification nor
read-repair, as everything will be handled by scrub itself.
However that behavior is really no different than metadata inode, thus
we can reuse btree_inode as btrfs_bio::inode for scrub.
The only exception is in btrfs_submit_chunk() where if a bbio is from
scrub or data reloc inode, we set rst_search_commit_root to true.
This means we still need a way to distinguish scrub from metadata, but
that can be done by a new flag inside btrfs_bio.
Now btrfs_bio::inode is a mandatory parameter, we can extract fs_info
from that inode thus can remove btrfs_bio::fs_info to save 8 bytes from
btrfs_bio structure.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: b39b26e017 ("btrfs: zoned: don't zone append to conventional zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5667f9c8e ]
[BUG]
When I tried to remove btrfs_bio::fs_info and use btrfs_bio::inode to
grab the fs_info, the header "btrfs_inode.h" is needed to access the
full btrfs_inode structure.
Then btrfs will fail to compile.
[CAUSE]
There is a recursive including chain:
"bio.h" -> "btrfs_inode.h" -> "extent_map.h" -> "compression.h" ->
"bio.h"
That recursive including is causing problems for btrfs.
[ENHANCEMENT]
To reduce the risk of recursive including:
- Remove unnecessary local includes from btrfs headers
Either the included header is pulled in by other headers, or is
completely unnecessary.
- Remove btrfs local includes if the header only requires a pointer
In that case let the implementing C file to pull the required header.
This is especially important for headers like "btrfs_inode.h" which
pulls in a lot of other btrfs headers, thus it's a mine field of
recursive including.
- Remove unnecessary temporary structure definition
Either if we have included the header defining the structure, or
completely unused.
Now including "btrfs_inode.h" inside "bio.h" is completely fine,
although "btrfs_inode.h" still includes "extent_map.h", but that header
only includes "fs.h", no more chain back to "bio.h".
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: b39b26e017 ("btrfs: zoned: don't zone append to conventional zone")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc804a8d7e ]
I/O requests beyond the end of the filesystem should be zeroed out,
similar to loopback devices and that is what we expect.
Fixes: ce63cb62d7 ("erofs: support unencoded inodes for fileio")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80d0c27a0a ]
These BIOs are actually harmless in practice, as they are all pseudo
BIOs and do not use advanced features like chaining. Using the BIO
interface is a more friendly and unified approach for both bdev and
and file-backed I/Os (compared to awkward bvec interfaces).
Let's use bio_endio() instead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Stable-dep-of: bc804a8d7e ("erofs: handle end of filesystem properly for file-backed mounts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e91b44c93 ]
get_burstcount() can return -EBUSY on timeout. When this happens,
st33zp24_send() returns directly without releasing the locality
acquired earlier.
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Fixes: bf38b87108 ("tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbd6e97c83 ]
get_burstcount() can return -EBUSY on timeout. When this happens, the
function returns directly without releasing the locality that was
acquired at the beginning of tpm_tis_i2c_send().
Use goto out_err to ensure proper cleanup when get_burstcount() fails.
Fixes: aad628c1d9 ("char/tpm: Add new driver for Infineon I2C TIS TPM")
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2537089413 ]
The dw_i3c_master_i2c_xfers() function allocates memory for the xfer
structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get()
fails, the function returns without freeing the allocated xfer, resulting
in a memory leak.
Add a dw_i3c_master_free_xfer() call to the error path to ensure the
allocated memory is properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 62fe9d06f5 ("i3c: dw: Add power management support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260126081121.644099-1-zilin@seu.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b58eaa4761 ]
The devs_lock spinlock introduced when adding support for ibi:s was
never initialized.
Fixes: e389b1d72a ("i3c: dw: Add support for in-band interrupts")
Suggested-by: Jani Nurminen <jani.nurminen@windriver.com>
Signed-off-by: Fredrik Markstrom <fredrik.markstrom@est.tech>
Reviewed-by: Ivar Holmqvist <ivar.holmqvist@est.tech>
Link: https://patch.msgid.link/20260116-i3c_dw_initialize_spinlock-v3-1-cf707b6ed75f@est.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faddeb8483 ]
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]
Reported-by: syzbot+ea1cd4aa4d1e98458a55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ea1cd4aa4d1e98458a55
Fixes: d0a22a4b03 ("gfs2: Fix iomap write page reclaim deadlock")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22150a7d40 ]
Commit a475c5dd16 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>.
Fixes: a475c5dd16 ("gfs2: Free quota data objects synchronously")
Reported-by: syzbot+046b605f01802054bff0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=046b605f01802054bff0
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11d763f0b0 ]
Fix a bug in gfs2's asynchronous glock handling for rename and exchange
operations. The original async implementation from commit ad26967b9a
("gfs2: Use async glocks for rename") mentioned that retries were needed
but never implemented them, causing operations to fail with -ESTALE
instead of retrying on timeout.
Also makes the waiting interruptible.
In addition, the timeouts used were too high for situations in which
timing out is a rare but expected scenario. Switch to shorter timeouts
with randomization and exponentional backoff.
Fixes: ad26967b9a ("gfs2: Use async glocks for rename")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0775157b9 ]
To prevent inconsistent state when an error occurs, ensure the hot-join
flag is updated only when enabling or disabling hot-join succeeds.
Fixes: 317bacf960 ("i3c: master: add enable(disable) hot join in sys entry")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 589cff4975 ]
The init_fs symbol is defined in <linux/init_task.h> but was
not included in fs/fs_struct.c so fix by adding the include.
Fixes the following sparse warning:
fs/fs_struct.c:150:18: warning: symbol 'init_fs' was not declared. Should it be static?
Fixes: 3e93cd6718 ("Take fs_struct handling to new file")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260108115856.238027-1-ben.dooks@codethink.co.uk
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1219e0feae ]
The comment above file_ref_init() says:
"We're SLAB_TYPESAFE_BY_RCU so initialize f_ref last."
but file_set_fsnotify_mode() was added after file_ref_init().
Move it right after setting f_mode, where it makes more sense.
Fixes: 711f9b8fbe ("fsnotify: disable pre-content and permission events by default")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260109211536.3565697-1-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6784f27472 ]
commit 4ef4ac3601 ("device_cgroup: avoid access to ->i_rdev in the
common case in devcgroup_inode_permission()") reordered the checks in
devcgroup_inode_permission() to check the inode mode before checking
i_rdev, for better cache behavior.
However, the likely() annotation on the i_rdev check was not updated
to reflect the new code flow. Originally, when i_rdev was checked
first, likely(!inode->i_rdev) made sense because most inodes were(?)
regular files/directories, thus i_rdev == 0.
After the reorder, by the time we reach the i_rdev check, we have
already confirmed the inode IS a block or character device. Block and
character special files are precisely defined by having a device number
(i_rdev), so !inode->i_rdev is now the rare edge case, not the common
case.
Branch profiling confirmed this is 100% mispredicted:
correct incorrect % Function File Line
------- --------- - -------- ---- ----
0 2631904 100 devcgroup_inode_permission device_cgroup.h 24
Remove likely() to avoid giving the wrong hint to the CPU.
Fixes: 4ef4ac3601 ("device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260107-likely_device-v1-1-0c55f83a7e47@debian.org
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3502cea99c ]
Move device name initialization to occur after i3c_bus_init()
so that i3cbus->id is guaranteed to be assigned before it is used.
Fixes: 9d4f219807 ("i3c: fix refcount inconsistency in i3c_master_register")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260112-upstream_i3c_fix-v1-1-cbbf2cb71809@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 671ef08d94 ]
Change to adjust effective L3 cache size with SNC enabled change
introduced the snc_nodes_per_l3_cache() function to detect the Intel
Sub-NUMA Clustering (SNC) feature by comparing #CPUs in node0 with #CPUs
sharing LLC with CPU0. The function was designed to return:
(1) >1: SNC mode is enabled.
(2) 1: SNC mode is not enabled or not supported.
However, on certain Hygon CPUs, #CPUs sharing LLC with CPU0 is actually
less than #CPUs in node0. This results in snc_nodes_per_l3_cache()
returning 0 (calculated as cache_cpus / node_cpus).
This leads to a division by zero error in get_cache_size():
*cache_size /= snc_nodes_per_l3_cache();
Causing the resctrl selftest to fail with:
"Floating point exception (core dumped)"
Fix the issue by ensuring snc_nodes_per_l3_cache() returns 1 when SNC
mode is not supported on the platform.
Updated commit log to fix commit has issues:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20251217030456.3834956-2-shenxiaochen@open-hieco.net
Fixes: a1cd99e700 ("selftests/resctrl: Adjust effective L3 cache size with SNC enabled")
Signed-off-by: Xiaochen Shen <shenxiaochen@open-hieco.net>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76489955c6 ]
The comapt_xxx_class symbols aren't declared in anything that
lib/comapt_audit.c is including (arm64 build) which is causing
the following sparse warnings:
lib/compat_audit.c:7:10: warning: symbol 'compat_dir_class'
was not declared. Should it be static?
lib/compat_audit.c:12:10: warning: symbol 'compat_read_class'
was not declared. Should it be static?
lib/compat_audit.c:17:10: warning: symbol 'compat_write_class'
was not declared. Should it be static?
lib/compat_audit.c:22:10: warning: symbol 'compat_chattr_class'
was not declared. Should it be static?
lib/compat_audit.c:27:10: warning: symbol 'compat_signal_class'
was not declared. Should it be static?
Trying to fix this by chaning compat_audit.c to inclde <linux/audit.h>
does not work on arm64 due to compile errors with the extra includes
that changing this header makes. The simpler thing would be just to
move the definitons of these symbols out of <linux/audit.h> into
<linux/audit_arch.h> which is included.
Fixes: 4b58841149 ("audit: Add generic compat syscall support")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[PM: rewrite subject line, fixed line length in description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8a73cc46c ]
When hfs_bnode_create() finds that a node is already hashed (which should
not happen in normal operation), it currently returns the existing node
without incrementing its reference count. This causes a reference count
inconsistency that leads to a kernel panic when the node is later freed
in hfs_bnode_put():
kernel BUG at fs/hfsplus/bnode.c:676!
BUG_ON(!atomic_read(&node->refcnt))
This scenario can occur when hfs_bmap_alloc() attempts to allocate a node
that is already in use (e.g., when node 0's bitmap bit is incorrectly
unset), or due to filesystem corruption.
Returning an existing node from a create path is not normal operation.
Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's
already hashed. This properly signals the error condition to callers,
which already check for IS_ERR() return values.
Reported-by: syzbot+1c8ff72d0cd8a50dfeaa@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1c8ff72d0cd8a50dfeaa
Link: https://lore.kernel.org/all/784415834694f39902088fa8946850fc1779a318.camel@ibm.com/
Fixes: 634725a929 ("[PATCH] hfs: cleanup HFS+ prints")
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20251229204938.1907089-1-shardul.b@mpiricsoftware.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5c23a4d29 ]
It seems like, after the request_mem_region(), the corresponding
release_mem_region() must take the same size. This was done
in (now removed due to previous refactoring) charlcd_remove()
but not in the error path in charlcd_probe().
Fixes: ce8962455e ("ARM: 6214/2: driver for the character LCD found in ARM refdesigns")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5551b02fdb upstream.
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80
Fixes: 2be8e3ee8e ("IB/umad: Add P_Key index support")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260203100628.1215408-1-ioerts@kookmin.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14ab3da122 upstream.
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260204092546.489842-1-ioerts@kookmin.ac.kr
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260217200006.470920131@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91b76f1059 upstream.
In a previous commit, a bug was introduced where compact SSA summaries
failed to utilize the entire block space in non-4KB block size
configurations, leading to inefficient space management.
This patch fixes the calculation logic to ensure that compact SSA
summaries can fully occupy the block regardless of the block size.
Reported-by: Chris Mason <clm@meta.com>
Fixes: e48e16f3e3 ("f2fs: support non-4KB block size without packed_ssa feature")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 50ac3ecd8e ]
-----------[ cut here ]------------
kernel BUG at fs/f2fs/data.c:358!
Call Trace:
<IRQ>
blk_update_request+0x5eb/0xe70 block/blk-mq.c:987
blk_mq_end_request+0x3e/0x70 block/blk-mq.c:1149
blk_complete_reqs block/blk-mq.c:1224 [inline]
blk_done_softirq+0x107/0x160 block/blk-mq.c:1229
handle_softirqs+0x283/0x870 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
invoke_softirq kernel/softirq.c:453 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680
irq_exit_rcu+0x9/0x30 kernel/softirq.c:696
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1050 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1050
</IRQ>
In f2fs_write_end_io(), it detects there is inconsistency in between
node page index (nid) and footer.nid of node page.
If footer of node page is corrupted in fuzzed image, then we load corrupted
node page w/ async method, e.g. f2fs_ra_node_pages() or f2fs_ra_node_page(),
in where we won't do sanity check on node footer, once node page becomes
dirty, we will encounter this bug after node page writeback.
Cc: stable@kernel.org
Reported-by: syzbot+803dd716c4310d16ff3a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=803dd716c4310d16ff3a
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ Context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed1ac3c977 upstream.
Commit 0b4eeee287 ("iommu/arm-smmu-qcom: Register the TBU driver in
qcom_smmu_impl_init") intended to also probe the TBU driver when
CONFIG_ARM_SMMU_QCOM_DEBUG is disabled, but also moved the corresponding
platform_driver_register() call into qcom_smmu_impl_init() which is
called from arm_smmu_device_probe().
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c ("driver core: enforce
device_lock for driver_match_device()") leading to a deadlock condition
described in [1].
Additionally, it was noted by Robin that the current approach is
potentially racy with async probe [2].
Hence, fix this by registering the qcom_smmu_tbu_driver from
module_init(). Unfortunately, due to the vendoring of the driver, this
requires an indirection through arm-smmu-impl.c.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/7ae38e31-ef31-43ad-9106-7c76ea0e8596@sirena.org.uk/
Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Link: https://lore.kernel.org/lkml/0c0d3707-9ea5-44f9-88a1-a65c62e3df8d@arm.com/ [2]
Fixes: dc23806a7c ("driver core: enforce device_lock for driver_match_device()")
Fixes: 0b4eeee287 ("iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> #LX2160ARDB
Tested-by: Wang Jiayue <akaieurus@gmail.com>
Reviewed-by: Wang Jiayue <akaieurus@gmail.com>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Link: https://patch.msgid.link/20260121141215.29658-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
