Separate out the uffd bits so it clear's what's happening.
Don't bother setting vrm->mmap_locked after unlocking, because after this
we are done anyway.
The only time we drop the mmap lock is on VMA shrink, at which point
vrm->new_len will be < vrm->old_len and the operation will not be
performed anyway, so move this code out of the if (vrm->mmap_locked)
block.
All addresses returned by mremap() are page-aligned, so the
offset_in_page() check on ret seems only to be incorrectly trying to
detect whether an error occurred - explicitly check for this.
No functional change intended.
Link: https://lkml.kernel.org/r/ebb8f29650b8e343fe98fefc67b3a61a24d1e0f1.1752770784.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than lumping everything together in do_mremap(), add a new helper
function, check_prep_vma(), to do the work relating to each VMA.
This further lays groundwork for subsequent patches which will allow for
batched VMA mremap().
Additionally, if we set vrm->new_addr == vrm->addr when prepping the VMA,
this avoids us needing to do so in the expand VMA mlocked case.
No functional change intended.
Link: https://lkml.kernel.org/r/15efa3c57935f7f8894094b94c1803c2f322c511.1752770784.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We are currently checking some things later, and some things immediately.
Aggregate the checks and avoid ones that need not be made.
Simplify things by aligning lengths immediately. Defer setting the delta
parameter until later, which removes some duplicate code in the hugetlb
case.
We can safely perform the checks moved from mremap_to() to
check_mremap_params() because:
* If we set a new address via vrm_set_new_addr(), then this is guaranteed
to not overlap nor to position the new VMA past TASK_SIZE, so there's no
need to check these later.
* We can simply page align lengths immediately. We do not need to check for
overlap nor TASK_SIZE sanity after hugetlb alignment as this asserts
addresses are huge-aligned, then huge-aligns lengths, rounding down. This
means any existing overlap would have already been caught.
Moving things around like this lays the groundwork for subsequent changes
to permit operations on batches of VMAs.
No functional change intended.
Link: https://lkml.kernel.org/r/c862d625c98b1abd861c406f2bfad8baf3287f83.1752770784.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/mremap: permit mremap() move of multiple VMAs", v4.
Historically we've made it a uAPI requirement that mremap() may only
operate on a single VMA at a time.
For instances where VMAs need to be resized, this makes sense, as it
becomes very difficult to determine what a user actually wants should they
indicate a desire to expand or shrink the size of multiple VMAs (truncate?
Adjust sizes individually? Some other strategy?).
However, in instances where a user is moving VMAs, it is restrictive to
disallow this.
This is especially the case when anonymous mapping remap may or may not be
mergeable depending on whether VMAs have or have not been faulted due to
anon_vma assignment and folio index alignment with vma->vm_pgoff.
Often this can result in surprising impact where a moved region is faulted,
then moved back and a user fails to observe a merge from otherwise
compatible, adjacent VMAs.
This change allows such cases to work without the user having to be
cognizant of whether a prior mremap() move or other VMA operations has
resulted in VMA fragmentation.
In order to do this, this series performs a large amount of refactoring,
most pertinently - grouping sanity checks together, separately those that
check input parameters and those relating to VMAs.
we also simplify the post-mmap lock drop processing for uffd and mlock()'d
VMAs.
With this done, we can then fairly straightforwardly implement this
functionality.
This works exclusively for mremap() invocations which specify
MREMAP_FIXED. It is not compatible with VMAs which use userfaultfd, as the
notification of the userland fault handler would require us to drop the
mmap lock.
It is also not compatible with file-backed mappings with customised
get_unmapped_area() handlers as these may not honour MREMAP_FIXED.
The input and output addresses ranges must not overlap. We carefully
account for moves which would result in VMA iterator invalidation.
While there can be gaps between VMAs in the input range, there can be no
gap before the first VMA in the range.
This patch (of 10):
We const-ify the vrm flags parameter to indicate this will never change.
We rename resize_is_valid() to remap_is_valid(), as this function does not
only apply to cases where we resize, so it's simply confusing to refer to
that here.
We remove the BUG() from mremap_at(), as we should not BUG() unless we are
certain it'll result in system instability.
We rename vrm_charge() to vrm_calc_charge() to make it clear this simply
calculates the charged number of pages rather than actually adjusting any
state.
We update the comment for vrm_implies_new_addr() to explain that
MREMAP_DONTUNMAP does not require a set address, but will always be moved.
Additionally consistently use 'res' rather than 'ret' for result values.
No functional change intended.
Link: https://lkml.kernel.org/r/cover.1752770784.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/d35ad8ce6b2c33b2f2f4ef7ec415f04a35cba34f.1752770784.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The single instance in which we use this function doesn't actually need to
change VMA flags, so remove this parameter and update the caller
accordingly.
[lorenzo.stoakes@oracle.com: correct comment]
Link: https://lkml.kernel.org/r/77f45b2e-a748-4635-9381-a5051091087f@lucifer.local
Link: https://lkml.kernel.org/r/20250714135839.178032-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dropping a lock, just to demand it again for an afterthought, cannot be
good if contended: convert lru_note_cost() to lru_note_cost_unlock_irq().
[hughd@google.com: delete unneeded comment]
Link: https://lkml.kernel.org/r/dbf9352a-1ed9-a021-c0c7-9309ac73e174@google.com
Link: https://lkml.kernel.org/r/21100102-51b6-79d5-03db-1bb7f97fa94c@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Roman Gushchin <roman.gushchin@linux.dev>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In try_to_inc_min_seq(), if min_seq[type] has not increased. In other
words, min_seq[type] == lrugen->min_seq[type]. Then we should return
directly to avoid unnecessary overhead later.
Corollary: If min_seq[type] of both anonymous and file is not increased,
try_to_inc_min_seq() will fail.
Proof:
It is known that min_seq[type] has not increased, that is, min_seq[type]
is equal to lrugen->min_seq[type], then the following:
case 1: min_seq[type] has not been reassigned and changed before
judgment min_seq[type] <= lrugen->min_seq[type].
Then the subsequent min_seq[type] <= lrugen->min_seq[type] judgment
will always be true.
case 2: min_seq[type] is reassigned to seq, before judgment
min_seq[type] <= lrugen->min_seq[type].
Then at least the condition of min_seq[type] > seq must be met
before min_seq[type] will be reassigned to seq.
That is to say, before the reassignment, lrugen->min_seq[type] > seq
is met, and then min_seq[type] = seq.
Then the following min_seq[type](seq) <= lrugen->min_seq[type] judgment
is always true.
Therefore, in try_to_inc_min_seq(), If min_seq[type] of both anonymous
and file is not increased, we can return false directly to avoid
unnecessary overhead.
Link: https://lkml.kernel.org/r/20250703023946.65315-1-jiahao.kernel@gmail.com
Signed-off-by: Hao Jia <jiahao1@lixiang.com>
Suggested-by: Yuanchu Xie <yuanchu@google.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kinsey Ho <kinseyho@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove hard-coded strings by using the str_true_false() helper function.
Signed-off-by: Liu Song <liu.song13@zte.com.cn>
Link: https://lore.kernel.org/r/20250721200138431dOU9KyajGyGi5339ma26p@zte.com.cn
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix target_parse_pr_out_transport_id() to return a string representing
the transport ID in a human-readable format (e.g., naa.xxxxxxxx...) for
various SCSI protocol types (SAS, FCP, SRP, SBP).
Previously, the function returned a pointer to the raw binary buffer,
which was incorrectly compared against human-readable strings, causing
comparisons to fail. Now, the function writes a properly formatted
string into a buffer provided by the caller. The output format depends
on the transport protocol:
* SAS: 64-bit identifier, "naa." prefix.
* FCP: 64-bit identifier, colon separated values.
* SBP: 64-bit identifier, no prefix.
* SRP: 128-bit identifier, "0x" prefix.
* iSCSI: IQN string.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20250714133738.11054-1-mlombard@redhat.com
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Daniel Zahka says:
====================
selftests: drv-net: tso: fix issues with tso selftest
There are a couple issues with the tso selftest.
- Features required for test cases are detected by searching the set
of active features at test start, so if a feature is supported by
hw, but disabled, the test will report that the feature under test
is not available and fail.
- The vxlan test cases do not use the correct ip link flags based on
the gso feature under test
- The non-tunneled tso6 test case is showing up with the wrong name.
With all patches applied test output is:
# Detected qstat for LSO wire-packets
TAP version 13
1..14
ok 1 tso.ipv4
# Testing with mangleid enabled
ok 2 tso.vxlan4_ipv4
ok 3 tso.vxlan4_ipv6
# Testing with mangleid enabled
ok 4 tso.vxlan_csum4_ipv4
ok 5 tso.vxlan_csum4_ipv6
# Testing with mangleid enabled
ok 6 tso.gre4_ipv4
ok 7 tso.gre4_ipv6
ok 8 tso.ipv6
# Testing with mangleid enabled
ok 9 tso.vxlan6_ipv4
ok 10 tso.vxlan6_ipv6
# Testing with mangleid enabled
ok 11 tso.vxlan_csum6_ipv4
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre6_ipv4
ok 14 tso.gre6_ipv6
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
====================
Link: https://patch.msgid.link/20250723184740.4075410-1-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The non-tunneled tso6 test case was showing up as:
ok 8 tso.ipv4
This is because of the way test_builder() uses the inner_ipver arg in
test naming, and how test_info is iterated over in main(). Given that
some tunnels not supported yet, e.g. ipip or sit, only support ipv4 or
ipv6 as the inner network protocol, I think the best fix here is to
call test_builder() in separate branches for tunneled and non-tunneled
tests, and to make supported inner l3 types an explicit attribute of
tunnel test cases.
# Detected qstat for LSO wire-packets
TAP version 13
1..14
ok 1 tso.ipv4
# Testing with mangleid enabled
ok 2 tso.vxlan4_ipv4
ok 3 tso.vxlan4_ipv6
# Testing with mangleid enabled
ok 4 tso.vxlan_csum4_ipv4
ok 5 tso.vxlan_csum4_ipv6
# Testing with mangleid enabled
ok 6 tso.gre4_ipv4
ok 7 tso.gre4_ipv6
ok 8 tso.ipv6
# Testing with mangleid enabled
ok 9 tso.vxlan6_ipv4
ok 10 tso.vxlan6_ipv6
# Testing with mangleid enabled
ok 11 tso.vxlan_csum6_ipv4
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre6_ipv4
ok 14 tso.gre6_ipv6
# Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250723184740.4075410-4-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When vxlan is used with ipv6 as the outer network header, the correct
ip link parameters for acheiving the SKB_GSO_UDP_TUNNEL gso type is
"udp6zerocsumtx udp6zerocsumrx". Otherwise the gso type will be
SKB_GSO_UDP_TUNNEL_CSUM.
This bug was the reason for the second of the three possible
invocations of run_one_stream() invocations, so that can be deleted as
well. We only need to test with the feature off and on.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250723184740.4075410-3-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tso.py uses the active features at the time of test execution
as the set of available gso features to test. This means if a gso
feature is supported but toggled off at test start, the test will be
skipped with a "Device does not support {feature}" message.
Instead, we can enumerate the set of toggleable features by capturing
the driver's hw_features bitmap. To avoid configuration side-effects
from running the test, we also snapshot the wanted_features flag set
before making any feature changes, and then attempt to restore the
same set of wanted_features before test exit.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250723184740.4075410-2-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman says:
====================
selftests: drv-net: Fix and improve command requirement checking
This series fixes remote command checking and cleans up command
requirement calls across tests.
The first patch fixes require_cmd() incorrectly checking commands
locally even when remote=True was specified due to a missing host
parameter.
The second patch makes require_cmd() usage explicit about local/remote
requirements, avoiding unnecessary test failures and consolidating
duplicate calls.
====================
Link: https://patch.msgid.link/20250723135454.649342-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make require_cmd() calls explicit about whether commands are needed
locally, remotely, or both.
Since require_cmd() defaults to local=True, tests should explicitly set
local=False when commands are only needed remotely.
- socat: Set local=False since it's only needed on remote hosts.
- iperf3: Use single call with both local=True and remote=True since
it's needed on both hosts.
This avoids unnecessary test failures when commands are missing locally
but available remotely where actually needed, and consolidates a
duplicate require_cmd() call into single call that checks both hosts.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Fixes: f1e68a1a4a ("selftests: drv-net: add require_XYZ() helpers for validating env")
Fixes: c76bab22e9 ("selftests: drv-net: rss_input_xfrm: Check test prerequisites before running")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The require_cmd() method was checking for command availability locally
even when remote=True was specified, due to a missing host parameter.
Fix by passing host=self.remote when checking remote command
availability, ensuring commands are verified on the correct host.
Fixes: f1e68a1a4a ("selftests: drv-net: add require_XYZ() helpers for validating env")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250723135454.649342-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building, the following warnings will appear.
"
pci_irq.c: In function ‘mlx5_ctrl_irq_request’:
pci_irq.c:494:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
pci_irq.c: In function ‘mlx5_irq_request_vector’:
pci_irq.c:561:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
eq.c: In function ‘comp_irq_request_sf’:
eq.c:897:1: warning: the frame size of 1080 bytes is larger than 1024 bytes [-Wframe-larger-than=]
irq_affinity.c: In function ‘irq_pool_request_irq’:
irq_affinity.c:74:1: warning: the frame size of 1048 bytes is larger than 1024 bytes [-Wframe-larger-than=]
"
These warnings indicate that the stack frame size exceeds 1024 bytes in
these functions.
To resolve this, instead of allocating large memory buffers on the stack,
it is better to use kvzalloc to allocate memory dynamically on the heap.
This approach reduces stack usage and eliminates these frame size warnings.
Acked-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250722212023.244296-1-yanjun.zhu@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We might be running a local application that also interacts with the
backing device. In this setup we have some clustering type of software
that manages the ownwer of it, so we don't want the kernel to restrict
us. This patch allows the user to control if the driver gets exclusive
access.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20250721185145.20913-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If the h8 exit fails during runtime resume process, the runtime thread
enters runtime suspend immediately and the error handler operates at the
same time. It becomes stuck and cannot be recovered through the error
handler. To fix this, use link recovery instead of the error handler.
Fixes: 4db7a23605 ("scsi: ufs: Fix concurrency of error handler and other error recovery paths")
Signed-off-by: Seunghui Lee <sh043.lee@samsung.com>
Link: https://lore.kernel.org/r/20250717081213.6811-1-sh043.lee@samsung.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prepare for adding an enum type for NAPI threaded states by adding
netif_threaded_enable API. De-export the existing netif_set_threaded API
and only use it internally. Update existing drivers to use
netif_threaded_enable instead of the de-exported netif_set_threaded.
Note that dev_set_threaded used by mt76 debugfs file is unchanged.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-3-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move multiple copies of same code snippet doing `gro_flush` and
`gro_normal_list` into separate helper function.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The trace event filter bootup self test tests a bunch of filter logic
against the ftrace_test_filter event, but does not actually call the
event. Work is being done to cause a warning if an event is defined but
not used. To quiet the warning call the trace event under an if statement
where it is disabled so it doesn't get optimized out.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas.schier@linux.dev>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250723194212.274458858@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Remove unused GT TLB invalidation trace points after converting to used
GT TLB invalidation jobs. The trace points removed were used during
early bring up of unstable driver, with a stable driver no need to
replace with new tracepoints.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-8-matthew.brost@intel.com
Rather than open-coding GT TLB invalidations in the PT layer, use GT TLB
invalidation jobs. The real benefit is that GT TLB invalidation jobs use
a single dma-fence context, allowing the generated fences to be squashed
in dma-resv/DRM scheduler.
v2:
- s/;;/; (checkpatch)
- Move ijob/mjob job push after range fence install
v3:
- Remove extra newline (Stuart)
- Set ijob/mjob near creation (Stuart)
- Add comment back in (Stuart)
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-7-matthew.brost@intel.com
Add GT TLB invalidation jobs which issue GT TLB invalidations. Built on
top of Xe generic dependency scheduler.
v2:
- Fix checkpatch
v3:
- Fix kernel doc in xe_gt_tlb_inval_job_alloc_dep,
xe_gt_tlb_inval_job_push
- Use IS_ERR_OR_NULL in xe_gt_tlb_inval_job_put
- Squash migrate lock / unlock helpers into this patch (Stuart)
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-6-matthew.brost@intel.com
Add a generic dependency scheduler for GT TLB invalidations, used to
schedule jobs that issue GT TLB invalidations to bind queues.
v2:
- Use shared GT TLB invalidation queue for dep scheduler
- Break allocation of dep scheduler into its own function
- Add define for max number tlb invalidations
- Skip media if not present
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-5-matthew.brost@intel.com
No sense to schedule GT TLB invalidation jobs in parallel which target
the same GT given these all contend on the same lock, create ordered
workqueue for GT TLB invalidation jobs.
v3:
- Fix type in commmit message (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-4-matthew.brost@intel.com
Add generic dependecy jobs / scheduler which serves as wrapper for DRM
scheduler. Useful when we want delay a generic operation until a
dma-fence signals.
Existing use cases could be destroying of resources based fences /
dma-resv, the preempt rebind worker, and pipelined GT TLB invalidations.
Written in such a way it could be moved to DRM subsystem if needed.
v3:
- Remove unnecessary cast (Staurt)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-3-matthew.brost@intel.com
Rather than inferring if an exec queue is a migration queue for a flag,
explicitly mark migration queues with a flag.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250724191216.4076566-2-matthew.brost@intel.com
This reverts commit c577ab7ba5.
The invocation of iscsi_put_conn() in iscsi_iter_destory_conn_fn() is
used to free the initial reference counter of iscsi_cls_conn. For
non-qla4xxx cases, the ->destroy_conn() callback (e.g.,
iscsi_conn_teardown) will call iscsi_remove_conn() and iscsi_put_conn()
to remove the connection from the children list of session and free the
connection at last. However for qla4xxx, it is not the case. The
->destroy_conn() callback of qla4xxx will keep the connection in the
session conn_list and doesn't use iscsi_put_conn() to free the initial
reference counter. Therefore, it seems necessary to keep the
iscsi_put_conn() in the iscsi_iter_destroy_conn_fn(), otherwise, there
will be memory leak problem.
Link: https://lore.kernel.org/all/88334658-072b-4b90-a949-9c74ef93cfd1@huawei.com/
Fixes: c577ab7ba5 ("scsi: iscsi: Fix HW conn removal use after free")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Link: https://lore.kernel.org/r/20250715073926.3529456-1-lilingfeng3@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc0 ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com
Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
-----BEGIN PGP SIGNATURE-----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=L038
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- hci_sync: fix double free in 'hci_discovery_filter_clear()'
- hci_event: Mask data status from LE ext adv reports
- hci_devcd_dump: fix out-of-bounds via dev_coredumpv
- ISO: add socket option to report packet seqnum via CMSG
- hci_event: Add support for handling LE BIG Sync Lost event
- ISO: Support SCM_TIMESTAMPING for ISO TS
- hci_core: Add PA_LINK to distinguish BIG sync and PA sync connections
- hci_sock: Reset cookie to zero in hci_sock_free_cookie()
drivers:
- btusb: Add new VID/PID 0489/e14e for MT7925
- btusb: Add a new VID/PID 2c7c/7009 for MT7925
- btusb: Add RTL8852BE device 0x13d3:0x3618
- btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
- btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
- btusb: QCA: Support downloading custom-made firmwares
- btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
- nxp: add support for supply and reset
- btnxpuart: Add support for 4M baudrate
- btnxpuart: Correct the Independent Reset handling after FW dump
- btnxpuart: Add uevents for FW dump and FW download complete
- btintel: Define a macro for Intel Reset vendor command
- btintel_pcie: Support Function level reset
- btintel_pcie: Add support for device 0x4d76
- btintel_pcie: Make driver wait for alive interrupt
- btintel_pcie: Fix Alive Context State Handling
- hci_qca: Enable ISO data packet RX
* tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (42 commits)
Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections
Bluetooth: hci_event: Mask data status from LE ext adv reports
Bluetooth: btintel_pcie: Fix Alive Context State Handling
Bluetooth: btintel_pcie: Make driver wait for alive interrupt
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID
Bluetooth: btusb: QCA: Support downloading custom-made firmwares
Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete
Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump
Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS
Bluetooth: ISO: add socket option to report packet seqnum via CMSG
Bluetooth: btintel: Define a macro for Intel Reset vendor command
Bluetooth: Fix typos in comments
Bluetooth: RFCOMM: Fix typos in comments
Bluetooth: aosp: Fix typo in comment
Bluetooth: hci_bcm4377: Fix typo in comment
Bluetooth: btrtl: Fix typo in comment
Bluetooth: btmtk: Fix typo in log string
...
====================
Link: https://patch.msgid.link/20250723190233.166823-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In _mpt3sas_fw_work() the fw_event reference is removed, it should also
be freed in all cases.
Fixes: 4318c73478 ("scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20250723153018.50518-1-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaIJYlAAKCRAraS+Z+3y5
E5MFAQDW29BJyjRbB75oy6RxmFZX+xFmGgmy1XO3w822gIwgzQD/WzhsmFPDYv/F
7iOpLvez6zTySUdTJXJGCTvYJG5EHwU=
=U8S4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-07-24
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 4 files changed, 40 insertions(+), 15 deletions(-).
The main changes are:
1) Improved verifier error message for incorrect narrower load from
pointer field in ctx, from Paul Chaignon.
2) Disabled migration in nf_hook_run_bpf to address a syzbot report,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test invalid narrower ctx load
bpf: Reject narrower access to pointer ctx fields
bpf: Disable migration in nf_hook_run_bpf().
====================
Link: https://patch.msgid.link/20250724173306.3578483-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In file included from drivers/crypto/intel/qat/qat_common/adf_pm_dbgfs_utils.c:4:
include/linux/sprintf.h:11:54: error: unknown type name 'va_list'
11 | __printf(2, 0) int vsprintf(char *buf, const char *, va_list);
| ^~~~~~~
include/linux/sprintf.h:1:1: note: 'va_list' is defined in header '<stdarg.h>'; this is probably fixable by adding '#include <stdarg.h>'
Link: https://lkml.kernel.org/r/20250721173754.42865913@canb.auug.org.au
Fixes: 39ced19b9e ("lib/vsprintf: split out sprintf() and friends")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A warning is raised when __request_region() detects a conflict with a
resource whose resource.desc is IORES_DESC_DEVICE_PRIVATE_MEMORY.
But this warning is only valid for iomem_resources.
The hmem device resource uses resource.desc as the numa node id, which can
cause spurious warnings.
This warning appeared on a machine with multiple cxl memory expanders.
One of the NUMA node id is 6, which is the same as the value of
IORES_DESC_DEVICE_PRIVATE_MEMORY.
In this environment it was just a spurious warning, but when I saw the
warning I suspected a real problem so it's better to fix it.
This change fixes this by restricting the warning to only iomem_resource.
This also adds a missing new line to the warning message.
Link: https://lkml.kernel.org/r/20250719112604.25500-1-akinobu.mita@gmail.com
Fixes: 7dab174e2e ("dax/hmem: Move hmem device registration to dax_hmem.ko")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMOS quota goal uses 'nid' field when the metric is
DAMOS_QUOTA_NODE_MEM_{USED,FREE}_BP. But the goal commit function is not
updating the goal's nid field. Fix it.
Link: https://lkml.kernel.org/r/20250719181932.72944-1-sj@kernel.org
Fixes: 0e1c773b50 ("mm/damon/core: introduce damos quota goal metrics for memory node utilization") [6.16.x]
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the just-added YNL helpers instead of manually setting
"_present" bits in the queue attrs. Compile tested only.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250723171046.4027470-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For basic types we "flatten" setters. If a request "a" has a simple
nest "b" with value "val" we print helpers like:
req_set_a_b(struct a *req, int val)
{
req->_present.a = 1;
req->b._present.val = 1;
req->b.val = ...
}
This is not possible for multi-attr because they have to be allocated
dynamically by the user. Print "object level" setters so that user
preparing the object doesn't have to futz with the presence bits
and other YNL internals.
Add the ability to pass in the variable name to generated setters.
Using "req" here doesn't feel right, while the attr is part of a request
it's not the request itself, so it seems cleaner to call it "obj".
Example:
static inline void
netdev_queue_id_set_id(struct netdev_queue_id *obj, __u32 id)
{
obj->_present.id = 1;
obj->id = id;
}
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In general YNL provides allocation and free helpers for types.
For pure nested structs which are used as multi-attr (and therefore
have to be allocated dynamically) we already print a free helper
as it's needed by free of the containing struct.
Add printing of the alloc helper for consistency. The helper
takes the number of entries to allocate as an argument, e.g.:
static inline struct netdev_queue_id *netdev_queue_id_alloc(unsigned int n)
{
return calloc(n, sizeof(struct netdev_queue_id));
}
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just to avoid making the main function even more enormous,
before adding more things to print move the free printing
to a helper which already prints the type.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't add _req to helper names for pure types. We don't currently
print those so it makes no difference to existing codegen.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
