* amd/amd-vi:
iommu/amd: Fix geometry.aperture_end for V2 tables
iommu/amd: Wrap debugfs ABI testing symbols snippets in literal code blocks
iommu/amd: Add documentation for AMD IOMMU debugfs support
iommu/amd: Add debugfs support to dump IRT Table
iommu/amd: Add debugfs support to dump device table
iommu/amd: Add support for device id user input
iommu/amd: Add debugfs support to dump IOMMU command buffer
iommu/amd: Add debugfs support to dump IOMMU Capability registers
iommu/amd: Add debugfs support to dump IOMMU MMIO registers
iommu/amd: Refactor AMD IOMMU debugfs initial setup
iommu/amd: Enable PASID and ATS capabilities in the correct order
iommu/amd: Add efr[HATS] max v1 page table level
iommu/amd: Add HATDis feature support
* intel/vt-d:
iommu/vt-d: Fix UAF on sva unbind with pending IOPFs
iommu/vt-d: Make iotlb_sync_map a static property of dmar_domain
iommu/vt-d: Deduplicate cache_tag_flush_all by reusing flush_range
iommu/vt-d: Fix missing PASID in dev TLB flush with cache_tag_flush_all
iommu/vt-d: Split paging_domain_compatible()
iommu/vt-d: Split intel_iommu_enforce_cache_coherency()
iommu/vt-d: Create unique domain ops for each stage
iommu/vt-d: Split intel_iommu_domain_alloc_paging_flags()
iommu/vt-d: Do not wipe out the page table NID when devices detach
iommu/vt-d: Fold domain_exit() into intel_iommu_domain_free()
iommu/vt-d: Lift the __pa to domain_setup_first_level/intel_svm_set_dev_pasid()
iommu/vt-d: Optimize iotlb_sync_map for non-caching/non-RWBF modes
iommu/vt-d: Remove the CONFIG_X86 wrapping from iommu init hook
The GPIO controllers in most Rockchip SoCs are part of power domains
that are always powered on, i.e. PD_BUS or PD_PMU. These always powered
on power domains have typically not been described in the device tree.
Because these power domains have been left out of the device tree there
has not been any real need to properly describe the GPIO controllers
power domain.
On RK3528 the GPIO controllers are spread out among the described
PD_RKVENC, PD_VO and PD_VPU power domains. However, one GPIO controller
belong to an undescribed always powered on power domain.
Add support to describe an optional power-domains for the GPIO
controllers in Rockchip SoCs.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250723085654.2273324-2-jonas@kwiboo.se
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit 08a149c40b ("gpiolib: Clean up headers") added a forward
declaration for struct device.
Later, commit 07445ae1c2 ("gpiolib: of: change of_find_gpio() to
accept device node") changed the function signature to accept a struct
device_node instead of a struct device.
Replace forward declaration of struct device with struct device_node to
match the updated function signature.
Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Link: https://lore.kernel.org/r/20250721155737.261990-1-andrey.lalaev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
of_node_to_fwnode() is an irqdomain's reimplementation of the
"officially" defined of_fwnode_handle(). The former is in the process of
being removed, so use the latter instead.
This is the last in-tree user.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 1e5c9b1efa ("misc: add FPC202 dual port controller driver")
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250723053516.1796097-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20250723055325.1800024-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Put the PC104 kconfig option in drivers/Kconfig along with
other buses (AMBA, EISA, PCI, CXL, PCCard, & RapidIO).
This localizes PC104 with option bus kconfig options to make
it easier to find.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: William Breathitt Gray <wbg@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250722235431.3671754-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250718-restricted-pointers-virt-v1-1-12913fceaf52@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UART controllers in most Rockchip SoCs are part of power domains
that are always powered on. These always powered on power domains have
typically not been described in the device tree.
Because these power domains have been left out of the device tree there
has not been any real need to properly describe the UART controllers
power domain of Rockchip SoCs.
On Rockchip RK3528 the UART controllers are spread out among the
described PD_RKVENC, PD_VO and PD_VPU power domains. However, one UART
controller belong to an undescribed always powered on power domain.
Add support to describe an optional power-domains for the UART
controllers.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250723085654.2273324-5-jonas@kwiboo.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the PSLVERR_RESP_EN parameter is set to 1, the device generates
an error response if an attempt is made to read an empty RBR (Receive
Buffer Register) while the FIFO is enabled.
In serial8250_do_startup(), calling serial_port_out(port, UART_LCR,
UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes
dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter
function enables the FIFO via serial_out(p, UART_FCR, p->fcr).
Execution proceeds to the serial_port_in(port, UART_RX).
This satisfies the PSLVERR trigger condition.
When another CPU (e.g., using printk()) is accessing the UART (UART
is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) ==
(lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter
dw8250_force_idle().
Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock
to fix this issue.
Panic backtrace:
[ 0.442336] Oops - unknown exception [#1]
[ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a
[ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e
...
[ 0.442416] console_on_rootfs+0x26/0x70
Fixes: c49436b657 ("serial: 8250_dw: Improve unwritable LCR workaround")
Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dedicated samsung,exynos2200-uart compatible to the dt-schema for
representing uart of the exynos2200.
Like GS101, it has a required DT property samsung,uart-fifosize and
exhibits the 32 bit register access limit, so reuse support for it.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250722120859.443283-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a recent change in clang to expose uninitialized warnings from
const variables [1], there is a warning in cxacru_heavy_init():
drivers/usb/atm/cxacru.c:1104:6: error: variable 'bp' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized]
1104 | if (instance->modem_type->boot_rom_patch) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/atm/cxacru.c:1113:39: note: uninitialized use occurs here
1113 | cxacru_upload_firmware(instance, fw, bp);
| ^~
drivers/usb/atm/cxacru.c:1104:2: note: remove the 'if' if its condition is always true
1104 | if (instance->modem_type->boot_rom_patch) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/atm/cxacru.c:1095:32: note: initialize the variable 'bp' to silence this warning
1095 | const struct firmware *fw, *bp;
| ^
| = NULL
While the warning is technically correct that bp is conditionally passed
uninitialized to cxacru_upload_firmware(), it is ultimately a false
positive warning on the uninitialized use of bp because the same
condition that initializes bp, instance->modem_type->boot_rom_patch, is
the same one that gates the use of bp within cxacru_upload_firmware().
As this warning occurs in clang's frontend before inlining occurs, it
cannot know that these conditions are indentical to avoid the warning.
Manually inline cxacru_upload_firmware() into cxacru_heavy_init(), as
that is its only callsite, so that clang can see that bp is initialized
and used under the same condition, clearing up the warning without any
functional changes to the code (LLVM was already doing this inlining
later).
Cc: stable@vger.kernel.org
Fixes: 1b0e614652 ("[PATCH] USB ATM: driver for the Conexant AccessRunner chipset cxacru")
Closes: https://github.com/ClangBuiltLinux/linux/issues/2102
Link: 2464313eef [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250722-usb-cxacru-fix-clang-21-uninit-warning-v2-1-6708a18decd2@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro SET_BITS_TO_LE_2BYTE ends with a semicolon inside its definition,
which can lead to an extra semicolon when used, resulting in inconsistent
formatting or potential warnings.
This patch removes the redundant semicolon to comply with kernel macro
style guidelines and improve readability.
Detected using checkpatch.pl.
Signed-off-by: Ali Nasrolahi <A.Nasrolahi01@gmail.com>
Link: https://lore.kernel.org/r/20250723041920.9623-2-A.Nasrolahi01@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A new version of a bona fide genuine NI-USB-HS+ adaptor
sends new response codes to the initialization sequence.
Add the checking for these response codes to suppress
console warning messages.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250722164810.2621-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleaned up redundant parentheses around the '&' (address-of)
operator in various expressions to improve code readability
and comply with kernel coding style guidelines.
Signed-off-by: Vivek BalachandharTN <vivek.balachandhar@gmail.com>
Link: https://lore.kernel.org/r/20250720092125.246844-1-vivek.balachandhar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unhandled fault: imprecise external abort (0x1406) at 0xaec8d000
[aec8d000] *pgd=03f74831, *pte=0525c75f, *ppte=0525cc7f
Internal error: Oops - BUG: 1406 [#1] SMP ARM
Hardware name: Xilinx Zynq Platform
PC is at sysfs_read+0xc4/0xd8
LR is at dev_attr_show+0x6c/0xc0
pc : [<c0ff9298>] lr : [<c0adad38>] psr: 60070013
sp : e09abd18 ip : c3193000 fp : c0adaccc
r10: 00000000 r9 : c3192000 r8 : 183abab5
r7 : c1d5d5a8 r6 : c2d71440 r5 : 00000024 r4 : c3192000
r3 : e0a60024 r2 : 00000000 r1 : c3192000 r0 : c2d71444
...
Call trace:
sysfs_read from dev_attr_show+0x6c/0xc0
dev_attr_show from sysfs_kf_seq_show+0x270/0x360
sysfs_kf_seq_show from seq_read_iter+0x7f4/0x10bc
seq_read_iter from vfs_read+0x350/0x3d0
vfs_read from ksys_read+0x104/0x194
ksys_read from ret_fast_syscall+0x0/0x54
The same abort is triggered if a read is attempted on RDFD register when
the fifo is empty.
Therefore, remove the sysfs interface and only let read()/write() modify
the fifo registers. For debugging purposes, a simple read-only debugfs
interface is added in the next patch.
Fixes: 4a965c5f89 ("staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Link: https://lore.kernel.org/r/20250720183833.3570345-1-ovidiu.panait.oss@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The battery manufacturer string was incorrectly null terminated using
bat_model instead of bat_manu. This could result in an unintended
write to the wrong field and potentially incorrect behavior.
fixe the issue by correctly null terminating the bat_manu string.
Fixes: 32890b9830 ("Staging: initial version of the nvec driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20250719080755.3954373-1-alok.a.tiwari@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SMMU engine on HIP09 chip has a hardware issue.
SMMU pagetable prefetch features may prefetch and use a invalid PTE
even the PTE is valid at that time. This will cause the device trigger
fake pagefaults. The solution is to avoid prefetching by adding a
SYNC command when smmu mapping a iova. But the performance of nic has a
sharp drop. Then we do this workaround, always enable tx bounce buffer,
avoid mapping/unmapping on TX path.
This issue only affects HNS3, so we always enable
tx bounce buffer when smmu enabled to improve performance.
Fixes: 295ba232a8 ("net: hns3: add device version to replace pci revision")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-5-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the queried maximum of vf channels is the maximum of channels
supported by each TC. However, the actual maximum of channels is
the maximum of channels supported by the device.
Fixes: 849e460776 ("net: hns3: add ethtool_ops.get_channels support for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-4-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When ptp init failed, we'd better disable the interrupt and clear the
flag, to avoid early report interrupt at next probe.
Fixes: 0bf5eb7885 ("net: hns3: add support for PTP")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-3-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The vport->req_vlan_fltr_en may be changed concurrently by function
hclge_sync_vlan_fltr_state() called in periodic work task and
function hclge_enable_vport_vlan_filter() called by user configuration.
It may cause the user configuration inoperative. Fixes it by protect
the vport->req_vlan_fltr by vport_lock.
Fixes: 2ba306627f ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722125423.1270673-2-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove the long dashed separator lines from block comments as they
don't follow kernel coding style, as suggested by Greg KH.
Signed-off-by: Ignacio Pena <ignacio.pena87@gmail.com>
Link: https://lore.kernel.org/r/20250716175044.81439-1-ignacio.pena87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FSF does not reside in the Franklin street anymore. Let's update
the address with the link to their website, as suggested in the latest
revisions of their GFDL-1.2 license:
https://www.gnu.org/licenses/old-licenses/fdl-1.2.txt
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FSF does not reside in the Franklin street anymore. Let's update
the address with the link to their website, as suggested in the latest
revisions of their GFDL-1.1 license:
https://www.gnu.org/licenses/old-licenses/fdl-1.1.txt
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FSF does not reside in the Franklin street anymore. Let's update
the address with the link to their website, as suggested in the latest
revisions of their LGPL-2.1 license:
https://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FSF does not reside in the Franklin street anymore. Let's update
the address with the link to their website, as suggested in the latest
revisions of their LGPL-2.0 license:
https://www.gnu.org/licenses/old-licenses/lgpl-2.0.txt
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FSF does not reside in the Franklin street anymore. Let's update
the address with the link to their website, as suggested in the latest
revisions of their GPL-2.0 license:
https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FSF does not reside in the Mass Ave anymore. Let's update the
address with the link to their website, as suggested in the latest
revisions of their GPL-1.0 license:
https://www.gnu.org/licenses/old-licenses/gpl-1.0.txt
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences.
Fixes: 684b89bc39 ("s390/ism: add device driver for internal shared memory")
Reported-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Tested-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Tested-by: Aliaksei Makarau <Aliaksei.Makarau@ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722161817.1298473-1-wintera@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This driver implements the reboot/shutdown support exposed by the SMC
on Apple Silicon machines, such as Apple M1 Macs.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-7-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
This driver implements the GPIO service on top of the SMC framework
on Apple Mac machines. In particular, these are the GPIOs present in the
PMU IC which are used to control power to certain on-board devices.
Although the underlying hardware supports various pin config settings
(input/output, open drain, etc.), this driver does not implement that
functionality and leaves it up to the firmware to configure things
properly. We also don't yet support interrupts/events. This is
sufficient for device power control, which is the only thing we need to
support at this point. More features will be implemented when needed.
To our knowledge, only Apple Silicon Macs implement this SMC feature.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-6-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
