Clear power.needs_force_resume in pm_runtime_reinit() in case it has
been set by pm_runtime_force_suspend() invoked from a driver remove
callback.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/9495163.CDJkKcVGEf@rjwysocki.net
Curently, drivers using pm_runtime_force_suspend/resume() cannot set
DPM_FLAG_SMART_SUSPEND because the devices with that flag set may need
to be resumed during system-wide resume regardless of whether or not
they have power.needs_force_resume set. That can happen due to a
dependency resolved at the beginning of a system-wide resume transition
(for instance, a bus type or PM domain has decided to resume a
subordinate device with DPM_FLAG_SMART_SUSPEND and its parent and
suppliers also need to be resumed).
To overcome this limitation, modify pm_runtime_force_resume() to check
the device's power.smart_suspend flag (which is set for devices with
DPM_FLAG_SMART_SUSPEND set that meet some additional requirements) and
the device's runtime PM status in addition to power.needs_force_resume.
Also change it to clear power.smart_suspend to ensure that it will not
handle the same device twice during one transition.
The underlying observation is that there are two cases in which the
device needs to be resumed by pm_runtime_force_resume(). One of them
is when the device has power.needs_force_resume set, which means that
pm_runtime_force_suspend() has suspended it and decided that it should
be resumed during the subsequent system resume. The other one is when
power.smart_suspend is set and the device's runtume PM status is
RPM_ACTIVE.
Update kerneldoc comments in accordance with the code changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3662906.iIbC2pHGDl@rjwysocki.net
Since pm_runtime_force_resume() and pm_runtime_need_not_resume() are only
needed for handling system-wide PM transitions, there is no reason to
compile them in if CONFIG_PM_SLEEP is unset.
Accordingly, move them under CONFIG_PM_SLEEP and make the static
inline stub for pm_runtime_force_resume() return an error to indicate
that it should not be used outside CONFIG_PM_SLEEP.
Putting pm_runtime_force_resume() also allows subsequent changes to
be more straightforward because this function is going to access a
device PM flag that is only defined when CONFIG_PM_SLEEP is set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3384523.aeNJFYEL58@rjwysocki.net
Since power.needs_force_resume is a bool field, use true/false
as its values instead of 1/0, respectively.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/2254988.irdbgypaU6@rjwysocki.net
If these PWMs are to be used, a #pwm-cells property is necessary. The
right location for that is in the SoC's dtsi file to not make
machine.dts files repeat the value for each usage. Currently the
machines based on nxp/lpc/lpc32xx.dtsi don't make use of the PWMs, so
there are no properties to drop there.
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.17, please pull the following:
- Linus makes a number of updates to the BCMBCA SoCs Device Tree files
to correct UART interrupt numbers, add interrupts to the RNG block,
and leverage the fact that all SoCs have the same peripherals at the
same aperture
- Uwe corrects the Merakia MX6X DTS file to have #pwm-cells = 3 as per
the binding
-----BEGIN PGP SIGNATURE-----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=ns2p
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ido4
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.17/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 6.17, please pull the following:
- Linus makes a number of updates to the BCMBCA SoCs Device Tree files
to correct UART interrupt numbers, add interrupts to the RNG block,
and leverage the fact that all SoCs have the same peripherals at the
same aperture
- Uwe corrects the Merakia MX6X DTS file to have #pwm-cells = 3 as per
the binding
* tag 'arm-soc/for-6.17/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm958625-meraki-mx6x: Use #pwm-cells = <3>
ARM: dts: bcm63178: Add BCMBCA peripherals
ARM: dts: bcm63148: Add BCMBCA peripherals
ARM: dts: bcm63138: Add BCMBCA peripherals
ARM: dts: bcm6878: Add BCMBCA peripherals
ARM: dts: bcm6855: Add BCMBCA peripherals
ARM: dts: bcm6846: Add interrupt to RNG
dt-bindings: rng: r200: Add interrupt property
ARM: dts: bcm6878: Correct UART0 IRQ number
Link: https://lore.kernel.org/r/20250630190216.1518354-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Infineon SEMPER flash family does not support E9h opcode as Exit 4-byte
mode (EX4B). Therefore, params->set_4byte_addr_mode is not determined by
BFPT parse. Fixup it up by introducing vendor specific EX4B opcode (B8h)
and function.
Fixes: c87c9b11c5 ("mtd: spi-nor: spansion: Determine current address mode")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250612074427.22263-1-Takahiro.Kuwano@infineon.com
Avoid starting "async" suspend processing upfront for devices that have
consumers and start "async" suspend processing for a device's suppliers
right after suspending the device itself.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/3384525.44csPzL39Z@rjwysocki.net
Avoid starting "async" resume processing upfront for devices that have
suppliers and start "async" resume processing for a device's consumers
right after resuming the device itself.
Suggested-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/3378088.aeNJFYEL58@rjwysocki.net
'struct spi_nor_fixups' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
23304 13168 0 36472 8e78 drivers/mtd/spi-nor/micron-st.o
After:
=====
text data bss dec hex filename
23560 12912 0 36472 8e78 drivers/mtd/spi-nor/micron-st.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/aa641732ba707ce3690217825c3ca7373ffde4f9.1748191985.git.christophe.jaillet@wanadoo.fr
According to POSIX spec, EAGAIN returned by read with O_NONBLOCK set
means the read would block. Hence, the common implementation in
nonblocking model will poll the file when the nonblocking read returns
EAGAIN. However, when the target file is thermal zone, this mechanism
will totally malfunction because thermal zone doesn't implement sysfs
notification and thus the poll will never return.
For example, the read in Golang implemnts such method and sometimes
hangs at reading some thermal zones via sysfs.
Change to return -ENODATA instead of -EAGAIN to userspace.
Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org>
Link: https://patch.msgid.link/20250620-temp-v3-1-6becc6aeb66c@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Our LMEM buffer objects are not cleared by default on alloc
and during VF provisioning we only setup LMTT PTEs for the
actually provisioned LMEM range. But beyond that valid range
we might leave some stale data that could either point to some
other VFs allocations or even to the PF pages.
Explicitly clear all new LMTT page to avoid the risk that a
malicious VF would try to exploit that gap.
While around add asserts to catch any undesired PTE overwrites
and low-level debug traces to track LMTT PT life-cycle.
Fixes: b1d2040582 ("drm/xe/pf: Introduce Local Memory Translation Table")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Lukasz Laguna <lukasz.laguna@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250701220052.1612-1-michal.wajdeczko@intel.com
Drop superfluous might_sleep() calls from dpm_resume(), dpm_complete(),
and dpm_prepare(). These functions already invoke primitives that
implicitly check for sleep in atomic context:
- dpm_resume() and dpm_complete() invoke mutex_lock(), which internally
triggers might_sleep().
- dpm_prepare() calls wait_for_device_probe(), which internally uses
flush_work(), and thus might_sleep().
These annotations are unnecessary and can be dropped to reduce clutter.
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Link: https://patch.msgid.link/20250617084650.341262-1-quic_zhonhan@quicinc.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The
Thunder2 SoC is missing the core "uartclk". In this case, the Linux
driver uses single clock for both clock inputs. Let's assume that's how
the h/w is wired and make the DT reflect that.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250609215706.3009692-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The PL011 IP has 2 clock inputs for UART core/baud and APB bus. The
LG131x SoCs are missing the core "uartclk". In this case, the Linux
driver uses single clock for both clock inputs. Let's assume that's how
the h/w is wired and make the DT reflect that.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20250609-dt-lg-fixes-v1-2-e210e797c2d7@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The LG1312 and LG1313 DT are almost identical with the exception of the
ethernet node. Refactor the common parts into a separate .dtsi file and
include it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20250609-dt-lg-fixes-v1-1-e210e797c2d7@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
One devicetree fix for a dtbs_warning that's been present for a while:
- Rename the PCIe BCM4377 node to conform to the devicetree binding
schema
Two devicetree fixes for W=1 warnings that have been introduced recently:
- Drop {address,size}-cells from SPI NOR which doesn't have any child
nodes such that these don't make sense
- Move touchbar mipi {address,size}-cells from the dtsi file where the
node is disabled and has no children to the dts file where it's
enabled and its children are declared
Signed-off-by: Sven Peter <sven@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCaFbl7AAKCRBEEX0kKnUe
6XsbAQDadDedhUPUJmAzlXvNI+TYA87lijy93dnJAyYCKgWaMwEA4rZRtrCGYhR3
oQOmoE+YVIrgOdpN4gzNlUjIF7mEqAw=
=8+H3
-----END PGP SIGNATURE-----
Merge tag 'apple-soc-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into arm/fixes
Apple SoC fixes for 6.16
One devicetree fix for a dtbs_warning that's been present for a while:
- Rename the PCIe BCM4377 node to conform to the devicetree binding
schema
Two devicetree fixes for W=1 warnings that have been introduced recently:
- Drop {address,size}-cells from SPI NOR which doesn't have any child
nodes such that these don't make sense
- Move touchbar mipi {address,size}-cells from the dtsi file where the
node is disabled and has no children to the dts file where it's
enabled and its children are declared
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: dts: apple: Move touchbar mipi {address,size}-cells from dtsi to dts
arm64: dts: apple: Drop {address,size}-cells from SPI NOR
arm64: dts: apple: t8103: Fix PCIe BCM4377 nodename
Fixing a sleep in atomic context in the FF-A notification callback by
adding a work queue to process in a non-atomic context.
-----BEGIN PGP SIGNATURE-----
iQJOBAABCgA4FiEE0qerISgy2SKkqO79Wr/6JGat8H4FAmhRB1kaHGplbnMud2lr
bGFuZGVyQGxpbmFyby5vcmcACgkQWr/6JGat8H5+SBAArMFHmtc56NAVWO1CKbV1
Hd9qszBXhWRYz4ahkvmC++/fOlSXKDz0YQJfKf6co32ZA8DIzgZ5QP8/YU6fJRJP
OR+3J1qRBGD5DgdD/50fflwfE3MDLSAnSvsIxn2hhpDslnoBsg9EdUi+rxHUfSGv
hmD6DlOvfMXGT/srFC0OxYpqKPK2wrDNxiX8b7OSd+w+QJDT5bJIO8c7ZMbyz429
t9mdqOtBqrgEy+eosVhyPoBjzU2f7pbcOPHENu6AkopZbdBCTntGloTKs4B3HXGz
aXYyIHpFEQIalY/3A1fkSbhEcA0NmvF33RbFcv1zz2XwxJJ18pA6Rdd2dH8nNbyb
wXxhyzP3qAi6lBCvh985eMdejqiTcYdZLDxv3v0Xf+F5nI92TSMUuo3mRr8m0sey
GD3dpM4RiN5WbzTXr97IlnVCDkAh/o6C6GO0chDRCjwUkgRa2ZKiBhKYs1uXUKaY
9CpRbFMbo49RKOjlKdTcVDOk+Yw6b8U1AsCMbW3g6rAlDm1OOQG5CrTeUYc6TOX5
bnt8BgTU8PKsjDjJbO6ch4tTIbs3leNTh+lVnTxU6762qI8UHA1bpdLJGXMNQTCn
gbJOFYcD49o3jZeBsx0MwX/gzHiGV9+9XztGFiBZeODYToBy4f8iEI0nTUX4cUNy
3yvUCYWf10yex5msSUBp++w=
=EN3j
-----END PGP SIGNATURE-----
Merge tag 'optee-fix-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into arm/fixes
A fix in the OP-TEE driver for v6.16
Fixing a sleep in atomic context in the FF-A notification callback by
adding a work queue to process in a non-atomic context.
* tag 'optee-fix-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
optee: ffa: fix sleep in atomic context
1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC
SNPS EUSB2 phy driver, because Kconfig entry was renamed when
changing the driver to a common one, shared with Samsung SoC, thus
defconfig lost that driver effectively.
2. Exynos ACPM: Fix timeouts happening with multiple requests.
-----BEGIN PGP SIGNATURE-----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=5+or
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung SoC fixes for v6.16
1. Correct CONFIG option in arm64 defconfig enabling the Qualcomm SoC
SNPS EUSB2 phy driver, because Kconfig entry was renamed when
changing the driver to a common one, shared with Samsung SoC, thus
defconfig lost that driver effectively.
2. Exynos ACPM: Fix timeouts happening with multiple requests.
* tag 'samsung-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: fix timeouts on xfers handling
arm64: defconfig: update renamed PHY_SNPS_EUSB2
There are additional SpacemiT syscon CCUs whose registers control both
clocks and resets: RCPU, RCPU2, and APBC2. Unlike those defined
previously, these will (initially) support only resets. They do not
incorporate power domain functionality.
Previously the clock properties were required for all compatible nodes.
Make that requirement only apply to the three existing CCUs (APBC, APMU,
and MPMU), so that the new reset-only CCUs can go without specifying them.
Define the index values for resets associated with all SpacemiT K1
syscon nodes, including those with clocks already defined, as well as
the new ones (without clocks).
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250702113709.291748-2-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Since commit 0e23387491 ("ipv6: fix races in ip6_dst_destroy()"),
'table' is unused in __fib6_drop_pcpu_from(), no need pass it from
fib6_drop_pcpu_from().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701041235.1333687-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the computer enters sleep status without a monitor
connected, the system switches the console to the virtual
terminal tty63(SUSPEND_CONSOLE).
If a monitor is subsequently connected before waking up,
the system skips the required VT restoration process
during wake-up, leaving the console on tty63 instead of
switching back to tty1.
To fix this issue, a global flag vt_switch_done is introduced
to record whether the system has successfully switched to
the suspend console via vt_move_to_console() during suspend.
If the switch was completed, vt_switch_done is set to 1.
Later during resume, this flag is checked to ensure that
the original console is restored properly by calling
vt_move_to_console(orig_fgconsole, 0).
This prevents scenarios where the resume logic skips console
restoration due to incorrect detection of the console state,
especially when a monitor is reconnected before waking up.
Signed-off-by: tuhaowen <tuhaowen@uniontech.com>
Link: https://patch.msgid.link/20250611032345.29962-1-tuhaowen@uniontech.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
addr_scope_policy description contains pointer to SCTP IPv4 scoping
draft but not its IETF Datatracker link. Add it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701031300.19088-6-bagasdotme@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The description for vector elements of SCTP-related memory usage
parameters (sctp{r,w,}mem) is formatted as normal paragraphs rather than
bullet list. Convert the description to the latter.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701031300.19088-5-bagasdotme@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These lists' items were separated by newlines but without bullet list
marker. Turn the lists into proper bullet list.
While at it, also reword values description for pf_expose to not repeat
mentioning SCTP_PEER_ADDR_CHANGE and SCTP_GET_PEER_ADDR_INFO sockopt.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701031300.19088-4-bagasdotme@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Format possible value range bounds of ioam6_id and ioam6_id_wide as
bullet list instead of running paragraph.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701031300.19088-3-bagasdotme@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alias names list for private VLAN proxy arp technology is formatted as
indented paragraph instead. Make it bullet list as it is better fit for
this purpose.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250701031300.19088-2-bagasdotme@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add Kconfig and Makefile for IPU7 driver and also update
the Makefile to build the IPU7 driver.
Also add a to-do file to list the TODOs.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Update MAINTAINERS file for Intel IPU7 input system staging driver.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The main input system driver mainly cover the basic hardware setup, v4l2
devices registration, firmware stream interfaces and interrupt handling.
Input system CSI2 receiver is exposed as a v4l2 sub-device. Each CSI2
sub-device represent one single CSI2 hardware port which be linked with
external sub-device such camera sensor by linked with ISYS CSI2's sink
pad. The CSI2 source pad is linked to the sink pad of video capture device.
Register V4L2 video device and setup the VB2 queues to support video
capture. Video streaming callback will trigger the input system driver to
construct a input system stream configuration for firmware based on data
type and stream ID and then queue buffers to firmware to do capture.
IPU7 CSI-2 D-PHY hardware is a Synopsys DWC MIPI CSI2 Rx IP, the driver
program the DPHY to receive MIPI data from camera sensors.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
IPU7 firmware defines the ABIs between firmware and software, this
patch adds a series of ABI headers.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
IPU7 irmware is generated and released as signed Code Partition
Directory (CPD) format file which is aligned with the SPI flash code
partition definition. The driver parses the CPD based on the layout.
Syscom is an inter-process(or) communication mechanism between an IPU and
host. Syscom uses message queues for message exchange between IPU and
host. Each message queue has its consumer and producer, host queue
messages to firmware as the producer and then firmware to dequeue the
messages as consumer and vice versa. IPU and host use shared registers or
memory to reside the read and write indices which are updated by consumer
and producer.
IPU7 firmware defined its boot sequence, driver setup the boot
configuration and program the boot parameters to start and run
the firmware.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The Intel IPU7 has internal microprocessor which runs the firmware
The microprocessor accesses system DRAM by its internal 32-bit virtual
address space. Driver should setup the MMU table and expose the DMA
APIs for memory buffer mapping.
This patch adds the IPU MMU and a DMA mapping implementation to setup
the internal MMU hardware.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
