My personal upstream email account was previously based on gmail which
has become difficult to manage upstream activities lately.
Update it to the more reliable linux.dev account.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250505-update_email_address-v1-1-1c24db506fdb@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
I found this lost series developed by Guo so here is a respin with the
comments on v2 applied.
This patch series adds Zicbop support and then enables the Linux
prefetch features.
* patches from https://lore.kernel.org/r/20250421142441.395849-1-alexghiti@rivosinc.com:
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
riscv: Introduce Zicbop instructions
Link: https://lore.kernel.org/r/20250421142441.395849-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
I am volunteering to maintain the kernel's crypto library code.
[ And Jason and Ard piped up too - Linus ]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Modify the driver to post 3 fewer buffers than the maximum rx buffers
(64) allowed for the firmware. This change mitigates a hardware issue
causing a race condition in the firmware, improving stability and data
handling.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This change addresses latency issues observed in HID use cases where
events arrive in bursts. By increasing the Rx descriptor count to 64,
the firmware can handle bursty data more effectively, reducing latency
and preventing buffer overflows.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The driver was posting only 6 rx buffers, despite the maximum rx buffers
being defined as 16. Having fewer RX buffers caused firmware exceptions
in HID use cases when events arrived in bursts.
Exception seen on android 6.12 kernel.
E Bluetooth: hci0: Received hw exception interrupt
E Bluetooth: hci0: Received gp1 mailbox interrupt
D Bluetooth: hci0: 00000000: ff 3e 87 80 03 01 01 01 03 01 0c 0d 02 1c 10 0e
D Bluetooth: hci0: 00000010: 01 00 05 14 66 b0 28 b0 c0 b0 28 b0 ac af 28 b0
D Bluetooth: hci0: 00000020: 14 f1 28 b0 00 00 00 00 fa 04 00 00 00 00 40 10
D Bluetooth: hci0: 00000030: 08 00 00 00 7a 7a 7a 7a 47 00 fb a0 10 00 00 00
D Bluetooth: hci0: 00000000: 10 01 0a
E Bluetooth: hci0: ---- Dump of debug registers —
E Bluetooth: hci0: boot stage: 0xe0fb0047
E Bluetooth: hci0: ipc status: 0x00000004
E Bluetooth: hci0: ipc control: 0x00000000
E Bluetooth: hci0: ipc sleep control: 0x00000000
E Bluetooth: hci0: mbox_1: 0x00badbad
E Bluetooth: hci0: mbox_2: 0x0000101c
E Bluetooth: hci0: mbox_3: 0x00000008
E Bluetooth: hci0: mbox_4: 0x7a7a7a7a
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: c2b636b3f7 ("Bluetooth: btintel_pcie: Add support for PCIe transport")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Releasing + re-acquiring RCU lock inside list_for_each_entry_rcu() loop
body is not correct.
Fix by taking the update-side hdev->lock instead.
Fixes: c7eaf80bfb ("Bluetooth: Fix hci_link_tx_to RCU lock usage")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
- remove obsolete network transports
- remove PCI IO port support
- start adding seccomp-based process handling
instead of ptrace
-----BEGIN PGP SIGNATURE-----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=iHzS
-----END PGP SIGNATURE-----
Merge tag 'uml-for-linux-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
"The only really new thing is the long-standing seccomp work
(originally from 2021!). Wven if it still isn't enabled by default due
to security concerns it can still be used e.g. for tests.
- remove obsolete network transports
- remove PCI IO port support
- start adding seccomp-based process handling instead of ptrace"
* tag 'uml-for-linux-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (29 commits)
um: remove "extern" from implementation of sigchld_handler
um: fix unused variable warning
um: fix SECCOMP 32bit xstate register restore
um: pass FD for memory operations when needed
um: Add SECCOMP support detection and initialization
um: Implement kernel side of SECCOMP based process handling
um: Track userspace children dying in SECCOMP mode
um: Add helper functions to get/set state for SECCOMP
um: Add stub side of SECCOMP/futex based process handling
um: Move faultinfo extraction into userspace routine
um: vector: Use mac_pton() for MAC address parsing
um: vector: Clean up and modernize log messages
um: chan_kern: use raw spinlock for irqs_to_free_lock
MAINTAINERS: remove obsolete file entry in TUN/TAP DRIVER
um: Fix tgkill compile error on old host OSes
um: stop using PCI port I/O
um: Remove legacy network transport infrastructure
um: vector: Eliminate the dependency on uml_net
um: Remove obsolete legacy network transports
um/asm: Replace "REP; NOP" with PAUSE mnemonic
...
After commit 68ca5d4eeb ("bpf: support BPF cookie in raw tracepoint
(raw_tp, tp_btf) programs"), we can show the cookie in bpf_link_info
like kprobe etc.
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250603154309.3063644-1-chen.dylane@linux.dev
Doing misaligned access to userspace memory would make a trap on
platform where it is emulated. Latest fixes removed the kernel
capability to do unaligned accesses to userspace memory safely since
interrupts are kept disabled at all time during that. Thus doing so
would crash the kernel.
Such behavior was detected with GET_UNALIGN_CTL() that was doing
a put_user() with an unsigned long* address that should have been an
unsigned int*. Reenabling kernel misaligned access emulation is a bit
risky and it would also degrade performances. Rather than doing that,
we will try to avoid any misaligned accessed by using copy_from/to_user()
which does not do any misaligned accesses. This can be done only for
!CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS and thus allows to only generate
a bit more code for this config.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250602193918.868962-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
- Disable problematic linker assertions for broken versions of LLD.
- Work around sporadic link failure with LLD and various randconfig
builds.
- Fix missing invalidation in the TLB batching code when reclaim races
with mprotect() and friends.
- Add a command-line override for MPAM to allow booting on systems with
broken firmware.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmhBcycQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNDwWCACtc4Jw3wwkmaiiP9Ner1/7wKq8xRLC2WRU
tJjWLSkeoTthxf0DZILc61rNpOalfaRK774/Xo0OiYOBpKeAi5cSaUYMyabVJGcK
k1R0KXDUu8oS6xKXmXyeuBV2pK4v4aET3E6lzUQZfvamhzuZfCvvKKrF5K8vv5Ph
eowBMWKugMrwXMOBkRgVopppobdneFuVvnoMlNNYWOy70wDekoPV3qizoVJG/ulQ
BTFunXX8Otufrm48Ye2bYalfwoiGdUQaJz/gRuHko0o3SOhqR3qZp2DWxQgBwJ+g
VI6/dRLnVQpdg6toTvS9jzPczVfLt4/5VhLevbBcJuaUOER4SOZl
=cfnk
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"We've got a couple of build fixes when using LLD, a missing TLB
invalidation and a workaround for broken firmware on SoCs with CPUs
that implement MPAM:
- Disable problematic linker assertions for broken versions of LLD
- Work around sporadic link failure with LLD and various randconfig
builds
- Fix missing invalidation in the TLB batching code when reclaim
races with mprotect() and friends
- Add a command-line override for MPAM to allow booting on systems
with broken firmware"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add override for MPAM
arm64/mm: Close theoretical race where stale TLB entry remains valid
arm64: Work around convergence issue with LLD linker
arm64: Disable LLD linker ASSERT()s for the time being
The specification of prctl() for GET_UNALIGN_CTL states that the value is
returned in an unsigned int * address passed as an unsigned long. Change
the type to match that and avoid an unaligned access as well.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250602193918.868962-3-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The current implementation is underperforming and in addition, it
triggers misaligned access traps on platforms which do not handle
misaligned accesses in hardware.
Use the existing assembly routines to solve both problems at once.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250602193918.868962-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
- fix arch_memremap_can_ram_remap() which incorrectly passed a PFN to
memblock_is_map_memory rather than the actual address.
- "Disallow kernel mode NEON when IRQs are disabled" - this needs a
better explanation.
"To avoid having to preserve/restore kernel mode NEON state when
such a softirq is taken softirqs are now disabled when using the
NEON from task context." should explain that it's nested kernel
mode. In other words, softirqs from user mode are fine, because
the context will be preserved. softirqs from kernel mode may
be from a context that has already saved the user NEON state, and
thus we would need to preserve the NEON state for the parent kernel
mode context, and this we don't allow.
The problem occurs when the kernel context disables hard IRQs, and
then uses NEON. When it's finished, and restores the userspace NEON
state, we call local_bh_enable() with hard IRQs disabled, which
causes a warning.
This commit addresses that by disallowing the use of NEON with hard
IRQs disabled.
https://lore.kernel.org/all/20250516231858.27899-4-ebiggers@kernel.org/T/#m104841b6e9346b1814c8b0fb9f2340551b0cd3e8
has some further context.
-----BEGIN PGP SIGNATURE-----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=V4ew
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM fixes from Russell King:
- Fix arch_memremap_can_ram_remap() which incorrectly passed a PFN to
memblock_is_map_memory rather than the actual address.
- Disallow kernel mode NEON when IRQs are disabled
Explanation:
"To avoid having to preserve/restore kernel mode NEON state when
such a softirq is taken softirqs are now disabled when using the
NEON from task context."
should explain that it's nested kernel mode.
In other words, softirqs from user mode are fine, because the context
will be preserved. softirqs from kernel mode may be from a context
that has already saved the user NEON state, and thus we would need to
preserve the NEON state for the parent kernel mode context, and this
we don't allow.
The problem occurs when the kernel context disables hard IRQs, and
then uses NEON. When it's finished, and restores the userspace NEON
state, we call local_bh_enable() with hard IRQs disabled, which
causes a warning.
This commit addresses that by disallowing the use of NEON with hard
IRQs disabled.
https://lore.kernel.org/all/20250516231858.27899-4-ebiggers@kernel.org/T/#m104841b6e9346b1814c8b0fb9f2340551b0cd3e8
has some further context
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9446/1: Disallow kernel mode NEON when IRQs are disabled
ARM: 9447/1: arm/memremap: fix arch_memremap_can_ram_remap()
The return value of regs_irqs_disabled() is true or false, so change
its type to reflect that and also make it always inline.
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250422113156.25742-1-yangtiezhu@loongson.cn
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
RISCV ELF use mapping symbols with special names $x, $d to
identify regions of RISCV code or code with different ISAs[1].
These symbols don't identify functions, so will confuse the
perf output.
The patch filters out these symbols at load time, similar to
"4886f2ca perf symbols: Ignore mapping symbols on aarch64".
[1] https://github.com/riscv-non-isa/riscv-elf-psabi-doc/blob/
master/riscv-elf.adoc#mapping-symbol
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250409025202.201046-1-haibo1.xu@intel.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Björn Töpel <bjorn@kernel.org> says:
From: Björn Töpel <bjorn@rivosinc.com>
Hi!
For over a year ago, Daniel and I was testing the V2 of Song's series.
I also promised to take the V2, that had been sitting on the lists for
too long, to rebase it on a new kernel, and re-test it.
One year later, here's the V3! ;-)
There are no changes from V2 other, than some simple checkpatch
cleanups.
Song's original cover:
| This series makes the kexec_file_load() syscall support to load
| Image binary file. At the same time, corresponding support for
| kexec-tools had been pushed to my repo[2].
|
| Now, we can leverage that kexec-tools and this series to use the
| kexec_load() or kexec_file_load() syscall to boot both vmlinux and
| Image file, as seen in these combo tests:
|
| ```
| 1. kexec -l vmlinux
| 2. kexec -l Image
| 3. kexec -s -l vmlinux
| 4. kexec -s -l Image
| ```
Notably, kexec-tools has still not made it upstream. I've prepared a
branch on my GH [3], that I indend to post ASAP. That branch is a
collection of fixes/features, including Song's userland Image loading.
The V2 is here [2], and V1 [1].
I've tested the kexec-file/Image on qemu-rv64, with following
combinations:
* ACPI/UEFI
* DT/UEFI
* DT
both "regular" kexec (-s + -e), and crashkernels (-p).
Note that there are two purgatory patches that has to be present (part
of -rc1, so all good):
commit 28093cfef5 ("riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator")
commit 3f7023171d ("riscv/purgatory: 4B align purgatory_start")
[1] https://lore.kernel.org/linux-riscv/20230914020044.1397356-1-songshuaishuai@tinylab.org/
[2] https://lore.kernel.org/linux-riscv/20231016092006.3347632-1-songshuaishuai@tinylab.org/
[3] https://github.com/bjoto/kexec-tools/tree/rv-on-master
* patches from https://lore.kernel.org/r/20250409193004.643839-1-bjorn@kernel.org:
riscv: kexec_file: Support loading Image binary file
riscv: kexec_file: Split the loading of kernel and others
Link: https://lore.kernel.org/r/20250409193004.643839-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
It is the built-in command line appended to the bootloader command line,
not the bootloader command line appended to the built-in command line.
Fixes: 3aed8c4326 ("RISC-V: Update Kconfig to better handle CMDLINE")
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Link: https://lore.kernel.org/r/tencent_A93C7FB46BFD20054AD2FEF4645913FF550A@qq.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
perf reports that 99.63% of the cycles from `modprobe amdgpu` are spent
inside module_frob_arch_sections(). This is because amdgpu.ko contains
about 300000 relocations in its .rela.text section, and the algorithm in
count_max_entries() takes quadratic time.
Apply two optimizations from the arm64 code, which together reduce the
total execution time by 99.58%. First, sort the relocations so duplicate
entries are adjacent. Second, reduce the number of relocations that must
be sorted by filtering to only relocations that need PLT/GOT entries, as
done in commit d4e0340919 ("arm64/module: Optimize module load time by
optimizing PLT counting").
Unlike the arm64 code, here the filtering and sorting is done in a
scratch buffer, because the HI20 relocation search optimization in
apply_relocate_add() depends on the original order of the relocations.
This allows accumulating PLT/GOT relocations across sections so sorting
and counting is only done once per module.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250409171526.862481-3-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Andy Chiu <andybnac@gmail.com> says:
This series makes atomic code patching in ftrace possible and eliminates
the need of the stop_machine dance. The major difference of this version
is that we merge the CALL_OPS support from Puranjay [1] and make direct
calls available for practical uses such as BPF. Thanks for the time
reviewing the series and suggestions, we hope this version gets a step
closer to happening in the upstream.
Please reference the link to v3 below for more introductory view of the
implementation [2]
Added patch: 2, 4, 10, 11, 12
Modified patch: 5, 6
Unchanged patch: 1, 3, 7, 8, 9
(1, 8 has commit msg modified)
Special thanks to Björn for his efforts on testing and guiding the
series!
[1]: https://lore.kernel.org/lkml/20240306165904.108141-1-puranjay12@gmail.com/
[2]: https://lore.kernel.org/linux-riscv/20241127172908.17149-1-andybnac@gmail.com/
* patches from https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com:
riscv: Documentation: add a description about dynamic ftrace
riscv: ftrace: support direct call using call_ops
riscv: Implement HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
riscv: ftrace: support PREEMPT
riscv: add a data fence for CMODX in the kernel mode
riscv: vector: Support calling schedule() for preemptible Vector
riscv: ftrace: do not use stop_machine to update code
riscv: ftrace: prepare ftrace for atomic code patching
kernel: ftrace: export ftrace_sync_ipi
riscv: ftrace: align patchable functions to 4 Byte boundary
riscv: ftrace factor out code defined by !WITH_ARG
riscv: ftrace: support fastcc in Clang for WITH_ARGS
Link: https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
The cost of changing a cacheline from shared to exclusive state can be
significant, especially when this is triggered by an exclusive store,
since it may result in having to retry the transaction.
This patch makes use of prefetch.w to prefetch cachelines for write
prior to lr/sc loops when using the xchg_small atomic routine.
This patch is inspired by commit 0ea366f5e1 ("arm64: atomics:
prefetch the destination word for write prior to stxr").
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20231231082955.16516-4-guoren@kernel.org
Tested-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20250421142441.395849-5-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Zicbop introduces cache blocks prefetching instructions, add the
necessary support for the kernel to use it in the coming commits.
Co-developed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20250421142441.395849-3-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The S-type instructions are first introduced and then used to define the
encoding of the Zicbop prefetching instructions.
Co-developed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20250421142441.395849-2-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Apparently sec_base doesn't mean relocated symbol value, which seems a
copy-pasting error in the comment. Assigned with the address of section
indexed by sym->st_shndx, it should represent base address of the
relevant section. Let's fix the comment to avoid possible confusion.
Fixes: 838b3e2848 ("RISC-V: Load purgatory in kexec_file")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250326073450.57648-2-ziyao@disroot.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This is the preparative patch for kexec_file_load Image support.
It separates the elf_kexec_load() as two parts:
- the first part loads the vmlinux (or Image)
- the second part loads other segments (e.g. initrd,fdt,purgatory)
And the second part is exported as the load_extra_segments() function
which would be used in both kexec-elf.c and kexec-image.c.
No functional change intended.
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250409193004.643839-2-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Add a section in cmodx to describe how dynamic ftrace works on riscv,
limitations, and assumptions.
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/r/20250407180838.42877-12-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
jump to FTRACE_ADDR if distance is out of reach
Co-developed-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/r/20250407180838.42877-11-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This patch enables support for DYNAMIC_FTRACE_WITH_CALL_OPS on RISC-V.
This allows each ftrace callsite to provide an ftrace_ops to the common
ftrace trampoline, allowing each callsite to invoke distinct tracer
functions without the need to fall back to list processing or to
allocate custom trampolines for each callsite. This significantly speeds
up cases where multiple distinct trace functions are used and callsites
are mostly traced by a single tracer.
The idea and most of the implementation is taken from the ARM64's
implementation of the same feature. The idea is to place a pointer to
the ftrace_ops as a literal at a fixed offset from the function entry
point, which can be recovered by the common ftrace trampoline.
We use -fpatchable-function-entry to reserve 8 bytes above the function
entry by emitting 2 4 byte or 4 2 byte nops depending on the presence of
CONFIG_RISCV_ISA_C. These 8 bytes are patched at runtime with a pointer
to the associated ftrace_ops for that callsite. Functions are aligned to
8 bytes to make sure that the accesses to this literal are atomic.
This approach allows for directly invoking ftrace_ops::func even for
ftrace_ops which are dynamically-allocated (or part of a module),
without going via ftrace_ops_list_func.
We've benchamrked this with the ftrace_ops sample module on Spacemit K1
Jupiter:
Without this patch:
baseline (Linux rivos 6.14.0-09584-g7d06015d936c #3 SMP Sat Mar 29
+-----------------------+-----------------+----------------------------+
| Number of tracers | Total time (ns) | Per-call average time |
|-----------------------+-----------------+----------------------------|
| Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) |
|----------+------------+-----------------+------------+---------------|
| 0 | 0 | 1357958 | 13 | - |
| 0 | 1 | 1302375 | 13 | - |
| 0 | 2 | 1302375 | 13 | - |
| 0 | 10 | 1379084 | 13 | - |
| 0 | 100 | 1302458 | 13 | - |
| 0 | 200 | 1302333 | 13 | - |
|----------+------------+-----------------+------------+---------------|
| 1 | 0 | 13677833 | 136 | 123 |
| 1 | 1 | 18500916 | 185 | 172 |
| 1 | 2 | 22856459 | 228 | 215 |
| 1 | 10 | 58824709 | 588 | 575 |
| 1 | 100 | 505141584 | 5051 | 5038 |
| 1 | 200 | 1580473126 | 15804 | 15791 |
|----------+------------+-----------------+------------+---------------|
| 1 | 0 | 13561000 | 135 | 122 |
| 2 | 0 | 19707292 | 197 | 184 |
| 10 | 0 | 67774750 | 677 | 664 |
| 100 | 0 | 714123125 | 7141 | 7128 |
| 200 | 0 | 1918065668 | 19180 | 19167 |
+----------+------------+-----------------+------------+---------------+
Note: per-call overhead is estimated relative to the baseline case with
0 relevant tracers and 0 irrelevant tracers.
With this patch:
v4-rc4 (Linux rivos 6.14.0-09598-gd75747611c93 #4 SMP Sat Mar 29
+-----------------------+-----------------+----------------------------+
| Number of tracers | Total time (ns) | Per-call average time |
|-----------------------+-----------------+----------------------------|
| Relevant | Irrelevant | 100000 calls | Total (ns) | Overhead (ns) |
|----------+------------+-----------------+------------+---------------|
| 0 | 0 | 1459917 | 14 | - |
| 0 | 1 | 1408000 | 14 | - |
| 0 | 2 | 1383792 | 13 | - |
| 0 | 10 | 1430709 | 14 | - |
| 0 | 100 | 1383791 | 13 | - |
| 0 | 200 | 1383750 | 13 | - |
|----------+------------+-----------------+------------+---------------|
| 1 | 0 | 5238041 | 52 | 38 |
| 1 | 1 | 5228542 | 52 | 38 |
| 1 | 2 | 5325917 | 53 | 40 |
| 1 | 10 | 5299667 | 52 | 38 |
| 1 | 100 | 5245250 | 52 | 39 |
| 1 | 200 | 5238459 | 52 | 39 |
|----------+------------+-----------------+------------+---------------|
| 1 | 0 | 5239083 | 52 | 38 |
| 2 | 0 | 19449417 | 194 | 181 |
| 10 | 0 | 67718584 | 677 | 663 |
| 100 | 0 | 709840708 | 7098 | 7085 |
| 200 | 0 | 2203580626 | 22035 | 22022 |
+----------+------------+-----------------+------------+---------------+
Note: per-call overhead is estimated relative to the baseline case with
0 relevant tracers and 0 irrelevant tracers.
As can be seen from the above:
a) Whenever there is a single relevant tracer function associated with a
tracee, the overhead of invoking the tracer is constant, and does not
scale with the number of tracers which are *not* associated with that
tracee.
b) The overhead for a single relevant tracer has dropped to ~1/3 of the
overhead prior to this series (from 122ns to 38ns). This is largely
due to permitting calls to dynamically-allocated ftrace_ops without
going through ftrace_ops_list_func.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
[update kconfig, asm, refactor]
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250407180838.42877-10-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
RISC-V spec explicitly calls out that a local fence.i is not enough for
the code modification to be visble from a remote hart. In fact, it
states:
To make a store to instruction memory visible to all RISC-V harts, the
writing hart also has to execute a data FENCE before requesting that all
remote RISC-V harts execute a FENCE.I.
Although current riscv drivers for IPI use ordered MMIO when sending IPIs
in order to synchronize the action between previous csd writes, riscv
does not restrict itself to any particular flavor of IPI. Any driver or
firmware implementation that does not order data writes before the IPI
may pose a risk for code-modifying race.
Thus, add a fence here to order data writes before making the IPI.
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250407180838.42877-8-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Each function entry implies a call to ftrace infrastructure. And it may
call into schedule in some cases. So, it is possible for preemptible
kernel-mode Vector to implicitly call into schedule. Since all V-regs
are caller-saved, it is possible to drop all V context when a thread
voluntarily call schedule(). Besides, we currently don't pass argument
through vector register, so we don't have to save/restore V-regs in
ftrace trampoline.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20250407180838.42877-7-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Now it is safe to remove dependency from stop_machine() for us to patch
code in ftrace.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20250407180838.42877-6-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
We use an AUIPC+JALR pair to jump into a ftrace trampoline. Since
instruction fetch can break down to 4 byte at a time, it is impossible
to update two instructions without a race. In order to mitigate it, we
initialize the patchable entry to AUIPC + NOP4. Then, the run-time code
patching can change NOP4 to JALR to eable/disable ftrcae from a
function. This limits the reach of each ftrace entry to +-2KB displacing
from ftrace_caller.
Starting from the trampoline, we add a level of indirection for it to
reach ftrace caller target. Now, it loads the target address from a
memory location, then perform the jump. This enable the kernel to update
the target atomically.
The new don't-stop-the-world text patching on change only one RISC-V
instruction:
| -8: &ftrace_ops of the associated tracer function.
| <ftrace enable>:
| 0: auipc t0, hi(ftrace_caller)
| 4: jalr t0, lo(ftrace_caller)
|
| -8: &ftrace_nop_ops
| <ftrace disable>:
| 0: auipc t0, hi(ftrace_caller)
| 4: nop
This means that f+0x0 is fixed, and should not be claimed by ftrace,
e.g. kprobe should be able to put a probe in f+0x0. Thus, we adjust the
offset and MCOUNT_INSN_SIZE accordingly.
[ alex: Fix build errors with !CONFIG_DYNAMIC_FTRACE ]
Co-developed-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20250407180838.42877-5-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The following ftrace patch for riscv uses a data store to update ftrace
function. Therefore, a romote fence is required to order it against
function_trace_op updates. The mechanism is similar to the fence between
function_trace_op and update_ftrace_func in the generic ftrace, so we
leverage the same ftrace_sync_ipi function.
[ alex: Fix build warning when !CONFIG_DYNAMIC_FTRACE ]
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/r/20250407180838.42877-4-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
We are changing ftrace code patching in order to remove dependency from
stop_machine() and enable kernel preemption. This requires us to align
functions entry at a 4-B align address.
However, -falign-functions on older versions of GCC alone was not strong
enoungh to align all functions. In fact, cold functions are not aligned
after turning on optimizations. We consider this is a bug in GCC and
turn off guess-branch-probility as a workaround to align all functions.
GCC bug id: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88345
The option -fmin-function-alignment is able to align all functions
properly on newer versions of gcc. So, we add a cc-option to test if
the toolchain supports it.
Suggested-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250407180838.42877-3-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
DYNAMIC_FTRACE selects DYNAMIC_FTRACE_WITH_ARGS and mcount-dyn.S in
riscv, so we can remove ifdef jargons of WITH_ARG when it is known that
DYNAMIC_FTRACE is true.
Signed-off-by: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/r/20250407180838.42877-2-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Some caller-saved registers which are not defined as function arguments
in the ABI can still be passed as arguments when the kernel is compiled
with Clang. As a result, we must save and restore those registers to
prevent ftrace from clobbering them.
- [1]: https://reviews.llvm.org/D68559
Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Closes: https://lore.kernel.org/linux-riscv/7e7c7914-445d-426d-89a0-59a9199c45b1@yadro.com/
Fixes: 7caa976546 ("ftrace: riscv: move from REGS to ARGS")
Acked-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20250407180838.42877-1-andybnac@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
There is unmatched xe_vm_unlock() in the __xe_exec_queue_init().
Leftover from commit fbeaad071a ("drm/xe: Create LRC BO without VM")
Fixes: 2b0a0ce0c2 ("drm/xe: Create LRC BO without VM")
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://lore.kernel.org/r/20250530135627.2821612-1-maciej.patelczyk@intel.com
(cherry picked from commit 28b996ce73)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Specifying VM during lrc->bo creation requires VM's reference
to be held for the lifetime of lrc->bo as it will use VM's dma
reservation object. Using VM's dma reservation object for
lrc->bo doesn't provide any advantage. Hence do not pass VM
while creating lrc->bo.
v2: Use xe_bo_unpin_map_no_vm (Matthew Brost)
Fixes: 264eecdba2 ("drm/xe: Decouple xe_exec_queue and xe_lrc")
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250529052031.2429120-2-niranjana.vishwanathapura@intel.com
(cherry picked from commit fbeaad071a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Daniele noticed that the fix in commit 2d2be279f1 ("drm/xe: fix UAF
around queue destruction") looks to have been unintentionally removed as
part of handling a conflict in some past merge commit. Add it back.
Fixes: ac44ff7cec ("Merge tag 'drm-xe-fixes-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250603174213.1543579-2-matthew.auld@intel.com
(cherry picked from commit 9d9fca62dc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The expected flow of operations when using PXP is to query the PXP
status and wait for it to transition to "ready" before attempting to
create an exec_queue. This flow is followed by the Mesa driver, but
there is no guarantee that an incorrectly coded (or malicious) app
will not attempt to create the queue first without querying the status.
Therefore, we need to clarify what the expected behavior of the queue
creation ioctl is in this scenario.
Currently, the ioctl always fails with an -EBUSY code no matter the
error, but for consistency it is better to distinguish between "failed
to init" (-EIO) and "not ready" (-EBUSY), the same way the query ioctl
does. Note that, while this is a change in the return code of an ioctl,
the behavior of the ioctl in this particular corner case was not clearly
spec'd, so no one should have been relying on it (and we know that Mesa,
which is the only known userspace for this, didn't).
v2: Minor rework of the doc (Rodrigo)
Fixes: 72d479601d ("drm/xe/pxp/uapi: Add userspace and LRC support for PXP-using queues")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250522225401.3953243-7-daniele.ceraolospurio@intel.com
(cherry picked from commit 21784ca960)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
