The define of the extension type was accidentally used instead of the
one of the property itself. They're both zero, so no functional issue,
but we should use the correct define for code correctness.
Fixes: 41a97c4a12 ("drm/xe/pxp/uapi: Add API to mark a BO as using PXP")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250522225401.3953243-6-daniele.ceraolospurio@intel.com
(cherry picked from commit 1d891ee820)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Customer is reporting a really subtle issue where we get random DMAR
faults, hangs and other nasties for kernel migration jobs when stressing
stuff like s2idle/s3/s4. The explosions seems to happen somewhere
after resuming the system with splats looking something like:
PM: suspend exit
rfkill: input handler disabled
xe 0000:00:02.0: [drm] GT0: Engine reset: engine_class=bcs, logical_mask: 0x2, guc_id=0
xe 0000:00:02.0: [drm] GT0: Timedout job: seqno=24496, lrc_seqno=24496, guc_id=0, flags=0x13 in no process [-1]
xe 0000:00:02.0: [drm] GT0: Kernel-submitted job timed out
The likely cause appears to be a race between suspend cancelling the
worker that processes the free_job()'s, such that we still have pending
jobs to be freed after the cancel. Following from this, on resume the
pending_list will now contain at least one already complete job, but it
looks like we call drm_sched_resubmit_jobs(), which will then call
run_job() on everything still on the pending_list. But if the job was
already complete, then all the resources tied to the job, like the bb
itself, any memory that is being accessed, the iommu mappings etc. might
be long gone since those are usually tied to the fence signalling.
This scenario can be seen in ftrace when running a slightly modified
xe_pm IGT (kernel was only modified to inject artificial latency into
free_job to make the race easier to hit):
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=1, guc_state=0x0, flags=0x4
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=0, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 1:0x1, gt=1, width=1, guc_id=1, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=2, guc_state=0x0, flags=0x3
xe_exec_queue_resubmit: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
.....
xe_exec_queue_memory_cat_error: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x3, flags=0x13
So the job_run() is clearly triggered twice for the same job, even
though the first must have already signalled to completion during
suspend. We can also see a CAT error after the re-submit.
To prevent this only resubmit jobs on the pending_list that have not yet
signalled.
v2:
- Make sure to re-arm the fence callbacks with sched_start().
v3 (Matt B):
- Stop using drm_sched_resubmit_jobs(), which appears to be deprecated
and just open-code a simple loop such that we skip calling run_job()
on anything already signalled.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4856
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250528113328.289392-2-matthew.auld@intel.com
(cherry picked from commit 38fafa9f39)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
For preempt_fence mode VM's we're rejecting eviction of
shared bos during VM_BIND. However, since we do this in the
move() callback, we're getting an eviction failure warning from
TTM. The TTM callback intended for these things is
eviction_valuable().
However, the latter doesn't pass in the struct ttm_operation_ctx
needed to determine whether the caller needs this.
Instead, attach the needed information to the vm under the
vm->resv, until we've been able to update TTM to provide the
needed information. And add sufficient lockdep checks to prevent
misuse and races.
v2:
- Fix a copy-paste error in xe_vm_clear_validating()
v3:
- Fix kerneldoc errors.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 0af944f0e3 ("drm/xe: Reject BO eviction if BO is bound to current VM")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250528164105.234718-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 9d5558649f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The XE driver can be built with or without VSEC support, but fails to link as
built-in if vsec is in a loadable module:
x86_64-linux-ld: vmlinux.o: in function `xe_vsec_init':
(.text+0x1e83e16): undefined reference to `intel_vsec_register'
The normal fix for this is to add a 'depends on INTEL_VSEC || !INTEL_VSEC',
forcing XE to be a loadable module as well, but that causes a circular
dependency:
symbol DRM_XE depends on INTEL_VSEC
symbol INTEL_VSEC depends on X86_PLATFORM_DEVICES
symbol X86_PLATFORM_DEVICES is selected by DRM_XE
The problem here is selecting a symbol from another subsystem, so change
that as well and rephrase the 'select' into the corresponding dependency.
Since X86_PLATFORM_DEVICES is 'default y', there is no change to
defconfig builds here.
Fixes: 0c45e76fcc ("drm/xe/vsec: Support BMG devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250529172355.2395634-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit e4931f8be3)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Move power2/curr2_crit to channel 1 i.e power1/curr1_crit as this
represents the entire card critical power/current.
v2: Update the date of curr1_crit also in hwmon documentation.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 345dadc4f6 ("drm/xe/hwmon: Add infra to support card power and energy attributes")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250529163458.2354509-3-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 25e963a09e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add support to manage power limits using pcode mailbox commands
for supported platforms.
v2:
- Address review comments. (Badal)
- Use mailbox commands instead of registers to manage power limits
for BMG.
- Clamp the maximum power limit to GPU firmware default value.
v3:
- Clamp power limit in write also for platforms with mailbox support.
v4:
- Remove unnecessary debug prints. (Badal)
v5:
- Update description of variable pl1_on_boot to fix kernel-doc error.
v6:
- Improve commit message, refer to BIOS as GPU firmware.
- Change macro READ_PL_FROM_BIOS to READ_PL_FROM_FW.
- Rectify drm_warn to drm_info.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: e90f7a58e6 ("drm/xe/hwmon: Add HWMON support for BMG")
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://lore.kernel.org/r/20250529163458.2354509-2-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 7596d839f6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
In xe_vm_close_and_put() we need to be able to call xe_svm_fini(),
however during vm creation we can call this on the error path, before
having actually initialised the svm state, leading to various splats
followed by a fatal NPD.
Fixes: 6fd979c2f3 ("drm/xe: Add SVM init / close / fini to faulting VMs")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4967
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250514152424.149591-4-matthew.auld@intel.com
(cherry picked from commit 4f296d77cf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
In xe_vm_close_and_put() we need to be able to call
flush_work(rebind_work), however during vm creation we can call this on
the error path, before having actually set up the worker, leading to a
splat from flush_work().
It looks like we can simply move the worker init step earlier to fix
this.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250514152424.149591-3-matthew.auld@intel.com
(cherry picked from commit 96af397aa1)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Core:
- support negative offsets for RTCs that have shipped with an epoch earlier
than 1970
New drivers:
- NXP S32G2/S32G3
- Sophgo CV1800
Drivers:
- loongson: fix missing alarm notifications for ACPI
- m41t80: kickstart ocillator upon failure
- mt6359: mt6357 support
- pcf8563: fix wrong alarm register
- sh: cleanups
-----BEGIN PGP SIGNATURE-----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=Xxip
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"There are two new drivers this cycle. There is also support for a
negative offset for RTCs that have been shipped with a date set using
an epoch that is before 1970. This unfortunately happens with some
products that ship with a vendor kernel and an out of tree driver.
Core:
- support negative offsets for RTCs that have shipped with an epoch
earlier than 1970
New drivers:
- NXP S32G2/S32G3
- Sophgo CV1800
Drivers:
- loongson: fix missing alarm notifications for ACPI
- m41t80: kickstart ocillator upon failure
- mt6359: mt6357 support
- pcf8563: fix wrong alarm register
- sh: cleanups"
* tag 'rtc-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (39 commits)
rtc: mt6359: Add mt6357 support
rtc: test: Test date conversion for dates starting in 1900
rtc: test: Also test time and wday outcome of rtc_time64_to_tm()
rtc: test: Emit the seconds-since-1970 value instead of days-since-1970
rtc: Fix offset calculation for .start_secs < 0
rtc: Make rtc_time64_to_tm() support dates before 1970
rtc: pcf8563: fix wrong alarm register
rtc: rzn1: support input frequencies other than 32768Hz
rtc: rzn1: Disable controller before initialization
dt-bindings: rtc: rzn1: add optional second clock
rtc: m41t80: reduce verbosity
rtc: m41t80: kickstart ocillator upon failure
rtc: s32g: add NXP S32G2/S32G3 SoC support
dt-bindings: rtc: add schema for NXP S32G2/S32G3 SoCs
dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rtt
dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtc
rtc: loongson: Add missing alarm notifications for ACPI RTC events
rtc: sophgo: add rtc support for Sophgo CV1800 SoC
rtc: stm32: drop unused module alias
rtc: s3c: drop unused module alias
...
Use the helper screen_info_video_type() to get the framebuffer
type from struct screen_info. Handle supported values in sorted
switch statement.
Reading orig_video_isVGA is unreliable. On most systems it is a
VIDEO_TYPE_ constant. On some systems with VGA it is simply set
to 1 to signal the presence of a VGA output. See vga_probe() for
an example. Retrieving the screen_info type with the helper
screen_info_video_type() detects these cases and returns the
appropriate VIDEO_TYPE_ constant. For VGA, sysfb creates a device
named "vga-framebuffer".
The sysfb code has been taken from vga16fb, where it likely didn't
work correctly either. With this bugfix applied, vga16fb loads for
compatible vga-framebuffer devices.
Fixes: 0db5b61e0d ("fbdev/vga16fb: Create EGA/VGA devices in sysfb code")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "Uwe Kleine-König" <u.kleine-koenig@baylibre.com>
Cc: Zsolt Kajtar <soci@c64.rulez.org>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250603154838.401882-1-tzimmermann@suse.de
Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes
invalid access to I/O memory.
Resources behind a PCI host bridge can be relocated by a certain offset
in the kernel's CPU address range used for I/O. The framebuffer memory
range stored in screen_info refers to the CPU addresses as seen during
boot (where the offset is 0). During boot up, firmware may assign a
different memory offset to the PCI host bridge and thereby relocating
the framebuffer address of the PCI graphics device as seen by the kernel.
The information in screen_info must be updated as well.
The helper pcibios_bus_to_resource() performs the relocation of the
screen_info's framebuffer resource (given in PCI bus addresses). The
result matches the I/O-memory resource of the PCI graphics device (given
in CPU addresses). As before, we store away the information necessary to
later update the information in screen_info itself.
Commit 78aa89d1df ("firmware/sysfb: Update screen_info for relocated
EFI framebuffers") added the code for updating screen_info. It is based
on similar functionality that pre-existed in efifb. Efifb uses a pointer
to the PCI resource, while the newer code does a memcpy of the region.
Hence efifb sees any updates to the PCI resource and avoids the issue.
v3:
- Only use struct pci_bus_region for PCI bus addresses (Bjorn)
- Clarify address semantics in commit messages and comments (Bjorn)
v2:
- Fixed tags (Takashi, Ivan)
- Updated information on efifb
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reported-by: "Ivan T. Ivanov" <iivanov@suse.de>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1240696
Tested-by: "Ivan T. Ivanov" <iivanov@suse.de>
Fixes: 78aa89d1df ("firmware/sysfb: Update screen_info for relocated EFI framebuffers")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.9+
Link: https://lore.kernel.org/r/20250528080234.7380-1-tzimmermann@suse.de
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmhBO1YACgkQfBQHDyUj
g0cuMxAAqscuPU17PjJPDy9Fzaq+B3nsZ9JR+Y/M7ifxFJSedJqdaZc7w4OsfGy2
VZIWiSbpK2WrQHLTh/KlE2AeycO0zX5H1vQmYc4GNQn+18cprxj68YHLb05ZskJq
sNVpEI0zZCxrFUgz8TrwdNcDzTC71TdtD2VLqZ6dCYcoi8lWiHPdbzxR/cSpbENb
ysSrAoJy6v92ES2McH3wLAcwuchlC1wFMof9kVVhe3ueZnrtvuBML/fZldKE85qc
dgcm9r1XOdcU3rOBxKQkQq2b0PzeRcUhUNRErqMQVTNs8Vg3N02x2jM214XKNLGt
G/aFac9neun6iJ3H8rXzHEFhO8bInNddCjfv1SBdV0UR2LZHnzHQHz+0Og/HdyGD
kkr3QsU+JzUQe29cHRwDKUR63l5dd+6PgwkWgcxYuauhFNRFpxdlosepmWZWZ+GE
OVy4D/tWu1acXvorm9ZnIbkg/9anzQJEj78+Y9Tlgh5C59nBINfBtVjTVw9BWDTo
1P9YS3YGdkT49uZu1sust9ug4H9/yifcXY4uXzBdTIYZTt3kNZfncVr3kMkMgAdU
bcm5PvnklIRo+JWd8WftiLQDyF4OWUcf5CG3VVFthIR4Fla+1Wpg41NjQVLvRNzk
Ji/WzLj0Wnzx+QuPyUC3NFKE11IJdB+7hGktfVBHcuQ/W6Vc7bY=
=cu98
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
Update my email address in MAINTAINERS and .mailmap files.
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Document steps to use SMB over RDMA using the linux SMB client and
KSMBD server
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- New Support
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for this
support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
- Updates
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy
-----BEGIN PGP SIGNATURE-----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=VxLP
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"As usual featuring couple of new driver and bunch of new device
support and some driver changes to Freescale, rockchip driver along
with couple of yaml binding conversions.
New Support:
- Qualcomm IPQ5424 qusb2 support, IPQ5018 uniphy-pcie driver
- Rockchip usb2 support for RK3562, RK3036 usb2 phy support
- Samsung exynos2200 eusb2 phy support and driver refactoring for
this support, exynos7870 USBDRD support
- Mediatek MT7988 xs-phy support
- Broadcom BCM74110 usb phy support
- Renesas RZ/V2H(P) usb2 phy support
Updates:
- Freescale phy rate claculation updates, i.MX95 tuning support
- Better error handling for amlogic pcie phy
- Rockchip color depth configuration and management support
- Yaml binding conversion for RK3399 Type-C and PCIe Phy"
* tag 'phy-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (77 commits)
phy: tegra: p2u: Broaden architecture dependency
phy: rockchip: inno-usb2: Add usb2 phy support for rk3562
dt-bindings: phy: rockchip,inno-usb2phy: add rk3562
phy: rockchip: inno-usb2: add phy definition for rk3036
dt-bindings: phy: rockchip,inno-usb2phy: add rk3036 compatible
phy: freescale: fsl-samsung-hdmi: Improve LUT search for best clock
phy: freescale: fsl-samsung-hdmi: Refactor finding PHY settings
phy: freescale: fsl-samsung-hdmi: Rename phy_clk_round_rate
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)
phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number
dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC
dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family
phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller
phy: phy-snps-eusb2: add support for exynos2200
phy: phy-snps-eusb2: refactor reference clock init
phy: phy-snps-eusb2: make reset control optional
phy: phy-snps-eusb2: make repeater optional
phy: phy-snps-eusb2: split phy init code
phy: phy-snps-eusb2: refactor constructs names
phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory
...
Couple of small core changes for
- sdw_assign_device_num() logic simplification, using internal slave id
for irqs and optimizing computing of port params in specific stream
states
- Intel driver updates for ACE3+ microphone privacy status reporting
and enabling the status in HDA Intel driver
-----BEGIN PGP SIGNATURE-----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=izGg
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and an Intel driver change:
- sdw_assign_device_num() logic simplification, using internal slave
id for irqs and optimizing computing of port params in specific
stream states
- Intel driver updates for ACE3+ microphone privacy status reporting
and enabling the status in HDA Intel driver"
* tag 'soundwire-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: only compute port params in specific stream states
ASoC: SOF: Intel: hda: Set the mic_privacy flag for soundwire with ACE3+
soundwire: intel: Add awareness of ACE3+ microphone privacy
soundwire: bus: Add internal slave ID and use for IRQs
soundwire: bus: Simplify sdw_assign_device_num()
syzbot reported that a recent patch forgot to unlock rcu
in the error path.
Adopt the convention that netlbl_conn_setattr() is already using.
Fixes: 6e9f2df1c5 ("calipso: Don't call calipso functions for AF_INET sk.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20250604133826.1667664-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one.
Fixes: d1df6fd8a1 ("ipv6: sr: define core operations for seg6local lightweight tunnel")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250604113252.371528-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the time rtnl_create_link() is running, dev->netdev_ops is NULL,
we must not use netdev_lock_ops() or risk a NULL deref if
CONFIG_NET_SHAPER is defined.
Use netif_set_group() instead of dev_set_group().
RIP: 0010:netdev_need_ops_lock include/net/netdev_lock.h:33 [inline]
RIP: 0010:netdev_lock_ops include/net/netdev_lock.h:41 [inline]
RIP: 0010:dev_set_group+0xc0/0x230 net/core/dev_api.c:82
Call Trace:
<TASK>
rtnl_create_link+0x748/0xd10 net/core/rtnetlink.c:3674
rtnl_newlink_create+0x25c/0xb00 net/core/rtnetlink.c:3813
__rtnl_newlink net/core/rtnetlink.c:3940 [inline]
rtnl_newlink+0x16d6/0x1c70 net/core/rtnetlink.c:4055
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6944
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x75b/0x8d0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:712 [inline]
Reported-by: syzbot+9fc858ba0312b42b577e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6840265f.a00a0220.d4325.0009.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 7e4d784f58 ("net: hold netdev instance lock during rtnetlink operations")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250604105815.1516973-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
from_cleanup_net() reads cleanup_net_task locklessly.
Add READ_ONCE()/WRITE_ONCE() annotations to avoid
a potential KCSAN warning, even if the race is harmless.
Fixes: 0734d7c3d9 ("net: expedite synchronize_net() for cleanup_net()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250604093928.1323333-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 846742f7e3 ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:
# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!
getting printed twice for every variant.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".
Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
iavf: get rid of the crit lock
Przemek Kitszel says:
Fix some deadlocks in iavf, and make it less error prone for the future.
Patch 1 is simple and independent from the rest.
Patches 2, 3, 4 are strictly a refactor, but it enables the last patch
to be much smaller.
(Technically Jake given his RB tags not knowing I will send it to -net).
Patch 5 just adds annotations, this also helps prove last patch to be correct.
Patch 6 removes the crit lock, with its unusual try_lock()s.
I have more refactoring for scheduling done for -next, to be sent soon.
There is a simple test:
add VF; decrease number of queueus; remove VF
that was way too hard to pass without this series :)
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: get rid of the crit lock
iavf: sprinkle netdev_assert_locked() annotations
iavf: extract iavf_watchdog_step() out of iavf_watchdog_task()
iavf: simplify watchdog_task in terms of adminq task scheduling
iavf: centralize watchdog requeueing itself
iavf: iavf_suspend(): take RTNL before netdev_lock()
====================
Link: https://patch.msgid.link/20250603171710.2336151-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable threaded NAPI by default for WireGuard devices in response to low
performance behavior that we observed when multiple tunnels (and thus
multiple wg devices) are deployed on a single host. This affects any
kind of multi-tunnel deployment, regardless of whether the tunnels share
the same endpoints or not (i.e., a VPN concentrator type of gateway
would also be affected).
The problem is caused by the fact that, in case of a traffic surge that
involves multiple tunnels at the same time, the polling of the NAPI
instance of all these wg devices tends to converge onto the same core,
causing underutilization of the CPU and bottlenecking performance.
This happens because NAPI polling is hosted by default in softirq
context, but the WireGuard driver only raises this softirq after the rx
peer queue has been drained, which doesn't happen during high traffic.
In this case, the softirq already active on a core is reused instead of
raising a new one.
As a result, once two or more tunnel softirqs have been scheduled on
the same core, they remain pinned there until the surge ends.
In our experiments, this almost always leads to all tunnel NAPIs being
handled on a single core shortly after a surge begins, limiting
scalability to less than 3× the performance of a single tunnel, despite
plenty of unused CPU cores being available.
The proposed mitigation is to enable threaded NAPI for all WireGuard
devices. This moves the NAPI polling context to a dedicated per-device
kernel thread, allowing the scheduler to balance the load across all
available cores.
On our 32-core gateways, enabling threaded NAPI yields a ~4× performance
improvement with 16 tunnels, increasing throughput from ~13 Gbps to
~48 Gbps. Meanwhile, CPU usage on the receiver (which is the bottleneck)
jumps from 20% to 100%.
We have found no performance regressions in any scenario we tested.
Single-tunnel throughput remains unchanged.
More details are available in our Netdev paper.
Link: https://netdevconf.info/0x18/docs/netdev-0x18-paper23-talk-paper.pdf
Signed-off-by: Mirco Barone <mirco.barone@polito.it>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250605120616.2808744-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
arch_timer_edge_cases uses ~0 as the maximum counter value, however there's
no architectural guarantee that this is valid.
Figure out the effective counter width based on the effective frequency
like it's done by the kernel.
This also serves as a workaround for AC03_CPU_14 that led to the
following assertion failure on ampere-one machines:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:169: timer_condition == istatus
pid=11236 tid=11236 errno=4 - Interrupted system call
1 0x0000000000404ce7: test_run at arch_timer_edge_cases.c:938
2 0x0000000000401ebb: main at arch_timer_edge_cases.c:1053
3 0x0000ffff9fa8625b: ?? ??:0
4 0x0000ffff9fa8633b: ?? ??:0
5 0x0000000000401fef: _start at ??:?
0x1 != 0x0 (timer_condition != istatus)
Note that the following subtest only worked since the counter initialized
with CVAL_MAX would instantly overflow (which is no longer the case):
test_set_cnt_after_cval_no_irq(timer, 0, DEF_CNT, CVAL_MAX, sm);
To fix this we could swap CVAL_MAX for 0 here but since that is already
done by test_move_counters_behind_timers() let's remove that subtest.
Link: https://lore.kernel.org/kvmarm/ac1de1d2-ef2b-d439-dc48-8615e121b07b@redhat.com
Link: https://amperecomputing.com/assets/AmpereOne_Developer_ER_v0_80_20240823_28945022f4.pdf
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-5-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
arch_timer_edge_cases hits the following assertion in < 10% of the test runs:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:490: timer_get_cntct(timer) >= DEF_CNT + (timer_get_cntfrq() * (uint64_t)(delta_2_ms) / 1000)
pid=17110 tid=17110 errno=4 - Interrupted system call
1 0x0000000000404ec7: test_run at arch_timer_edge_cases.c:945
2 0x0000000000401fa3: main at arch_timer_edge_cases.c:1074
3 0x0000ffffa774b587: ?? ??:0
4 0x0000ffffa774b65f: ?? ??:0
5 0x000000000040206f: _start at ??:?
timer_get_cntct(timer) >= DEF_CNT + msec_to_cycles(delta_2_ms)
Enabling the timer without proper xval initialization in set_tval_irq()
resulted in an early interrupt during timer reprogramming. Make sure
to set the xval before setting the enable bit.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-4-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
arch_timer_edge_cases tries to migrate itself across host cpus. Before
the first test, it migrates to cpu 0 by setting up an affinity mask with
only bit 0 set. After that it looks for the next possible cpu in the
current affinity mask which still has only bit 0 set. So there is no
migration at all.
Fix this by reading the default mask at start and use this to find
the next cpu in each iteration.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-3-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix the help text for arch_timer_edge_cases to show the correct
option for setting the wait time.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-2-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we don't have any use of __vcpu_sys_reg() as a lvalue,
remove the in-place update, and directly return the sanitised
value.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We are about to prevent the use of __vcpu_sys_reg() as a lvalue,
and getting the address of a rvalue is not a thing.
Update the couple of places where we do this to use the __ctxt_sys_reg()
accessor, which return the address of a register.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In a number of cases, we perform a Read-Modify-Write operation on
a system register, meaning that we would apply the RESx masks twice.
Instead, provide a new accessor that performs this RMW operation,
allowing the masks to be applied exactly once per operation.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Assigning a value to a system register doesn't do what it is
supposed to be doing if that register is one that has RESx bits.
The main problem is that we use __vcpu_sys_reg(), which can be used
both as a lvalue and rvalue. When used as a lvalue, the bit masking
occurs *before* the new value is assigned, meaning that we (1) do
pointless work on the old cvalue, and (2) potentially assign an
invalid value as we fail to apply the masks to it.
Fix this by providing a new __vcpu_assign_sys_reg() that does
what it says on the tin, and sanitises the *new* value instead of
the old one. This comes with a significant amount of churn.
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250603070824.1192795-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In the intel_connector_get_pipe() function, we check if
connection_mutex is held and generate our own WARN_ON if that's the
case. Instead of generating a non-standard warning for a mutex issue,
we should use the standard lockdep framework.
Change the function to use drm_modeset_lock_assert_held() instead.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250520095408.1310440-1-luciano.coelho@intel.com
Add drm_panic module for hyperv drm so that panic screen can be
displayed on panic.
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250526090117.80593-2-ryasuoka@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Don't WARN if imported buffers are in use in ivpu_gem_bo_free() as they
can be indeed used in the original context/driver.
Fixes: 647371a660 ("accel/ivpu: Add GEM buffer object management")
Cc: stable@vger.kernel.org # v6.3
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250528171220.513225-1-jacek.lawrynowicz@linux.intel.com
The test fails at the MPOL step if multiple nodes are available. The
reason is that mbind() sets the policy but the home_node, which is
retrieved by the futex code, is not set. This causes to retrieve the
current node and with multiple nodes it fails on one of the iterations.
Use numa_set_mempolicy_home_node() to set the expected node.
Use ksft_exit_fail_msg() to fail and exit in order not to confuse ktap.
Fixes: 3163369407 ("selftests/futex: Add futex_numa_mpol")
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250528085521.1938355-3-bigeasy@linutronix.de
Mark reported that futex_priv_hash fails on ARM64.
It turns out that the command line parsing does not terminate properly
and ends in the default case assuming an invalid option was passed.
Use an int as the return type for getopt().
Closes: https://lore.kernel.org/all/31869a69-063f-44a3-a079-ba71b2506cce@sirena.org.uk/
Fixes: 3163369407 ("selftests/futex: Add futex_numa_mpol")
Fixes: cda95faef7 ("selftests/futex: Add futex_priv_hash")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250528085521.1938355-2-bigeasy@linutronix.de
There may be concurrency between perf_cgroup_switch and
perf_cgroup_event_disable. Consider the following scenario: after a new
perf cgroup event is created on CPU0, the new event may not trigger
a reprogramming, causing ctx->is_active to be 0. In this case, when CPU1
disables this perf event, it executes __perf_remove_from_context->
list _del_event->perf_cgroup_event_disable on CPU1, which causes a race
with perf_cgroup_switch running on CPU0.
The following describes the details of this concurrency scenario:
CPU0 CPU1
perf_cgroup_switch:
...
# cpuctx->cgrp is not NULL here
if (READ_ONCE(cpuctx->cgrp) == NULL)
return;
perf_remove_from_context:
...
raw_spin_lock_irq(&ctx->lock);
...
# ctx->is_active == 0 because reprogramm is not
# tigger, so CPU1 can do __perf_remove_from_context
# for CPU0
__perf_remove_from_context:
perf_cgroup_event_disable:
...
if (--ctx->nr_cgroups)
...
# this warning will happened because CPU1 changed
# ctx.nr_cgroups to 0.
WARN_ON_ONCE(cpuctx->ctx.nr_cgroups == 0);
[peterz: use guard instead of goto unlock]
Fixes: db4a835601 ("perf/core: Set cgroup in CPU contexts for new cgroup events")
Signed-off-by: Luo Gengkun <luogengkun@huaweicloud.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250604033924.3914647-3-luogengkun@huaweicloud.com
Commit a3c3c6667("perf/core: Fix child_total_time_enabled accounting
bug at task exit") moves the event->state update to before
list_del_event(). This makes the event->state test in list_del_event()
always false; never calling perf_cgroup_event_disable().
As a result, cpuctx->cgrp won't be cleared properly; causing havoc.
Fixes: a3c3c6667("perf/core: Fix child_total_time_enabled accounting bug at task exit")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/all/aD2TspKH%2F7yvfYoO@e129823.arm.com/
While chasing down a missing perf_cgroup_event_disable() elsewhere,
Leo Yan found that both perf_put_aux_event() and
perf_remove_sibling_event() were also missing one.
Specifically, the rule is that events that switch to OFF,ERROR need to
call perf_cgroup_event_disable().
Unify the disable paths to ensure this.
Fixes: ab43762ef0 ("perf: Allow normal events to output AUX data")
Fixes: 9f0c4fa111 ("perf/core: Add a new PERF_EV_CAP_SIBLING event capability")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250605123343.GD35970@noisy.programming.kicks-ass.net
We always pass 0 in the set argument of skl_scaler_get_filter_select()
calls, so the argument is unnecessary. Remove it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250520082917.1302665-3-luciano.coelho@intel.com
Baisheng Gao reported an ARM64 crash, which Mark decoded as being a
synchronous external abort -- most likely due to trying to access
MMIO in bad ways.
The crash further shows perf trying to do a user stack sample while in
exit_mmap()'s tlb_finish_mmu() -- i.e. while tearing down the address
space it is trying to access.
It turns out that we stop perf after we tear down the userspace mm; a
receipie for disaster, since perf likes to access userspace for
various reasons.
Flip this order by moving up where we stop perf in do_exit().
Additionally, harden PERF_SAMPLE_CALLCHAIN and PERF_SAMPLE_STACK_USER
to abort when the current task does not have an mm (exit_mm() makes
sure to set current->mm = NULL; before commencing with the actual
teardown). Such that CPU wide events don't trip on this same problem.
Fixes: c5ebcedb56 ("perf: Add ability to attach user stack dump to sample")
Reported-by: Baisheng Gao <baisheng.gao@unisoc.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250605110815.GQ39944@noisy.programming.kicks-ass.net
In dkl_phy_set_hip_idx(), we may try to shift a value negatively,
whose behavior is undefined. This can happen because we define
TC_PORT_NONE to -1, so theoretically tc_port could be -1. We will
then use tc_port to shift to the correct address of the specified
port, but if it's negative, anything can happen.
If this happens or tc_port exceeds I915_MAX_TC_PORTS, it's safer to
return with a warning than risk an invalid write.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250520082917.1302665-2-luciano.coelho@intel.com
