Under specific embedded scenarios, we might still use DP interface
rather than eDP interface. Under such case, detection link training
is unnecessary.
Add a new dcdebugmask value that can be used to skip the detection LT
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Link: https://lore.kernel.org/amd-gfx/20250521063934.2111323-1-Wayne.Lin@amd.com/
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match what is declared as DPP color caps with hw caps. DCN401 has MPC
shaper + 3D LUTs that are movable before and after blending (get from
plane or stream), but no DPP blend LUTs.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Color gamut_remap state log may be not available for some hw versions,
so prevent null pointer dereference by checking if there is a function
to collect data for this hw version.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_ctx_mgr_fini() calls amdgpu_ctx_mgr_entity_fini() it contains
the exact same "context still alive" check as it will do next. Remove the
duplicated copy.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Function amdgpu_ctx_mgr_entity_fini() only has a single local caller so
lets make it local.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't enable BACO when in passthrough. PCI resets don't work
correctly when in BACO.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xgmi_port_num interface reports external link number for port number. To
be consistent, use the external link number for reporting other XGMI
link data also.
v2: For invalid link number return -EINVAL (Kevin)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"ENABLE" is currently misspelled in SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
"ENABLE" is currently misspelled in SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS
PS: checkpatch.pl is complaining about the presence of a space at the
start of drivers/gpu/drm/amd/include/atomfirmware.h line: 1716
This is propably because this file uses (two) spaces and not tabs.
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust set_value function in hw_hpd.c file to have
prefix to help in ftrace, the name change from
'set_value' to 'dal_hw_hpd_set_value'
Signed-off-by: Leonardo da Silva Gomes <leonardodasigomes@gmail.com>
Co-developed-by: Derick Frias <derick.william.moraes@gmail.com>
Signed-off-by: Derick Frias <derick.william.moraes@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adjust get_value function in hw_hpd.c file to have
prefix to help in ftrace, the name change from
'get_value' to 'dal_hw_hpd_get_value'
Signed-off-by: Leonardo da Silva Gomes <leonardodasigomes@gmail.com>
Co-developed-by: Derick Frias <derick.william.moraes@gmail.com>
Signed-off-by: Derick Frias <derick.william.moraes@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to fetch compute partition related metrics in SMUv13.0.6
SOCs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sysfs nodes to provide compute paritition specific data.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Helps to keep a build time check about usage of right datatype and
avoids maintenance as new versions get added.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update pmfw headers for smu_v_13_0_6 to include pldm version
as part of statics metrics table
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current cleanup order during file descriptor close can lead to
a race condition where the eviction fence worker attempts to access
a destroyed mutex from the user queue manager:
[ 517.294055] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 517.294060] WARNING: CPU: 8 PID: 2030 at kernel/locking/mutex.c:564
[ 517.294094] Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu]
The issue occurs because:
1. We destroy the user queue manager (including its mutex) first
2. Then try to destroy eviction fences which may have pending work
3. The eviction fence worker may try to access the already-destroyed mutex
Fix this by reordering the cleanup to:
1. First mark the fd as closing and destroy eviction fences,
which flushes any pending work
2. Then safely destroy the user queue manager after we're certain
no more fence work will be executed
The copy in amdgpu_driver_postclose_kms() needs to be removed (Christian)
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lock and refer to the eviction fence before the eviction fence
schedules work queue tries to signal it.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis shows that pointer "svms" cannot be NULL because it points
to the object "struct svm_range_list". Remove the extra NULL check. It is
meaningless and harms the readability of the code.
In the function svm_range_get_info() there is no possibility of failure.
Therefore, the caller of the function svm_range_get_info() does not need
a return value. Change the function svm_range_get_info() return type from
"int" to "void".
Since the function svm_range_get_info() has a return type of "void". The
caller of the function svm_range_get_info() does not need a return value.
Delete extra code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The bluefield_edac_readl() routine returns an uninitialized result on error
paths. In those cases the calling routine should not use the uninitialized
result. The driver should simply log the error, and then return early.
Fixes: e419675754 ("EDAC/bluefield: Use Arm SMC for EMI access on BlueField-2")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Link: https://lore.kernel.org/20250318214747.12271-1-davthompson@nvidia.com
Ilya Leoshkevich says:
====================
This series simplifies the s390 JIT by replacing the generation of
expolines (Spectre mitigation) with using the ones from the kernel
text. This is possible thanks to the V!=R s390 kernel rework.
Patch 1 is a small prerequisite for arch/s390 that I would like to
get in via the BPF tree. It has Heiko's Acked-by.
Patches 2 and 3 are the implementation.
====================
Link: https://patch.msgid.link/20250519223646.66382-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Simplify the JIT code by replacing the custom expolines with the ones
defined in the kernel text.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250519223646.66382-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After the V!=R rework (commit c98d2ecae0 ("s390/mm: Uncouple physical
vs virtual address spaces")), kernel and BPF programs are allocated
within a 4G region, making it possible to use relative addressing to
directly use kernel functions from BPF code.
Add two new macros for calling kernel functions from BPF code:
EMIT6_PCREL_RILB_PTR() and EMIT6_PCREL_RILC_PTR(). Factor out parts
of the existing macros that are helpful for implementing the new ones.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250519223646.66382-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It would be convenient to use the following pattern in the BPF JIT:
if (nospec_uses_trampoline())
emit_call(__s390_indirect_jump_r1);
Unfortunately with CONFIG_EXPOLINE=n the compiler complains about the
missing prototype of __s390_indirect_jump_r1(). One could wrap the
whole "if" statement in an #ifdef, but this clutters the code.
Instead, declare expoline thunk prototypes even when compiling without
expolines. When using the above code structure and compiling without
expolines, references to them are optimized away, and there are no
linker errors.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250519223646.66382-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When xdp is attached or detached, dev->ndo_bpf() is called by
do_setlink(), and it acquires netdev_lock() if needed.
Unlike other drivers, the bnxt driver is protected by netdev_lock while
xdp is attached/detached because it sets dev->request_ops_lock to true.
So, the bnxt_xdp(), that is callback of ->ndo_bpf should not acquire
netdev_lock().
But the xdp_features_{set | clear}_redirect_target() was changed to
acquire netdev_lock() internally.
It causes a deadlock.
To fix this problem, bnxt driver should use
xdp_features_{set | clear}_redirect_target_locked() instead.
Splat looks like:
============================================
WARNING: possible recursive locking detected
6.15.0-rc6+ #1 Not tainted
--------------------------------------------
bpftool/1745 is trying to acquire lock:
ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: xdp_features_set_redirect_target+0x1f/0x80
but task is already holding lock:
ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: do_setlink.constprop.0+0x24e/0x35d0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&dev->lock);
lock(&dev->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by bpftool/1745:
#0: ffffffffa56131c8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_setlink+0x1fe/0x570
#1: ffffffffaafa75a0 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_setlink+0x236/0x570
#2: ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: do_setlink.constprop.0+0x24e/0x35d0
stack backtrace:
CPU: 1 UID: 0 PID: 1745 Comm: bpftool Not tainted 6.15.0-rc6+ #1 PREEMPT(undef)
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7a/0xd0
print_deadlock_bug+0x294/0x3d0
__lock_acquire+0x153b/0x28f0
lock_acquire+0x184/0x340
? xdp_features_set_redirect_target+0x1f/0x80
__mutex_lock+0x1ac/0x18a0
? xdp_features_set_redirect_target+0x1f/0x80
? xdp_features_set_redirect_target+0x1f/0x80
? __pfx_bnxt_rx_page_skb+0x10/0x10 [bnxt_en
? __pfx___mutex_lock+0x10/0x10
? __pfx_netdev_update_features+0x10/0x10
? bnxt_set_rx_skb_mode+0x284/0x540 [bnxt_en
? __pfx_bnxt_set_rx_skb_mode+0x10/0x10 [bnxt_en
? xdp_features_set_redirect_target+0x1f/0x80
xdp_features_set_redirect_target+0x1f/0x80
bnxt_xdp+0x34e/0x730 [bnxt_en 11cbcce8fa11cff1dddd7ef358d6219e4ca9add3]
dev_xdp_install+0x3f4/0x830
? __pfx_bnxt_xdp+0x10/0x10 [bnxt_en 11cbcce8fa11cff1dddd7ef358d6219e4ca9add3]
? __pfx_dev_xdp_install+0x10/0x10
dev_xdp_attach+0x560/0xf70
dev_change_xdp_fd+0x22d/0x280
do_setlink.constprop.0+0x2989/0x35d0
? __pfx_do_setlink.constprop.0+0x10/0x10
? lock_acquire+0x184/0x340
? find_held_lock+0x32/0x90
? rtnl_setlink+0x236/0x570
? rcu_is_watching+0x11/0xb0
? trace_contention_end+0xdc/0x120
? __mutex_lock+0x946/0x18a0
? __pfx___mutex_lock+0x10/0x10
? __lock_acquire+0xa95/0x28f0
? rcu_is_watching+0x11/0xb0
? rcu_is_watching+0x11/0xb0
? cap_capable+0x172/0x350
rtnl_setlink+0x2cd/0x570
Fixes: 03df156dd3 ("xdp: double protect netdev->xdp_flags with netdev->lock")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250520071155.2462843-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- do not create the newly added multipath sysfs group for
non-multipath nodes (Nilay Shroff)
-----BEGIN PGP SIGNATURE-----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=wIO/
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.15-2025-05-22' of git://git.infradead.org/nvme into block-6.15
Pull NVMe fix from Christoph:
"nvme fixes for Linux 6.15
- do not create the newly added multipath sysfs group for
non-multipath nodes (Nilay Shroff)"
* tag 'nvme-6.15-2025-05-22' of git://git.infradead.org/nvme:
nvme: avoid creating multipath sysfs group under namespace path devices
With a VRF, ipv4 and ipv6 FIB expression behave differently.
fib daddr . iif oif
Will return the input interface name for ipv4, but the real device
for ipv6. Example:
If VRF device name is tvrf and real (incoming) device is veth0.
First round is ok, both ipv4 and ipv6 will yield 'veth0'.
But in the second round (incoming device will be set to "tvrf"), ipv4
will yield "tvrf" whereas ipv6 returns "veth0" for the second round too.
This makes ipv6 behave like ipv4.
A followup patch will add a test case for this, without this change
it will fail with:
get element inet t fibif6iif { tvrf . dead:1::99 . tvrf }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FAIL: did not find tvrf . dead:1::99 . tvrf in fibif6iif
Alternatively we could either not do anything at all or change
ipv4 to also return the lower/real device, however, nft (userspace)
doc says "iif: if fib lookup provides a route then check its output
interface is identical to the packets input interface." which is what
the nft fib ipv4 behaviour is.
Fixes: f6d0cbcf09 ("netfilter: nf_tables: add fib expression")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It was located in conntrack_vrf.sh because that already had the VRF bits.
Lets not add to this and move it to nft_fib.sh where this belongs.
No functional changes for the subtest intended.
The subtest is limited, it only covered 'fib oif'
(route output interface query) when the incoming interface is part
of a VRF.
Next we can extend it to cover 'fib type' for VRFs and also check fib
results when there is an unrelated VRF in same netns.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
fib can either lookup the interface id/name of the output interface that
would be used for the given address, or it can check for the type of the
address according to the fib, e.g. local, unicast, multicast and so on.
This can be used to e.g. make a locally configured address only reachable
through its interface.
Example: given eth0:10.1.1.1 and eth1:10.1.2.1 then 'fib daddr type' for
10.1.1.1 arriving on eth1 will be 'local', but 'fib daddr . iif type' is
expected to return 'unicast', whereas 'fib daddr' and 'fib daddr . iif'
are expected to indicate 'local' if such a packet arrives on eth0.
So far nft_fib.sh only covered oif/oifname, not type.
Repeat tests both with default and a policy (ip rule) based setup.
Also try to run all remaining tests even if a subtest has failed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Its now possible to build a kernel that has no support for the classic
xtables get/setsockopt interfaces and builtin tables.
In this case, we have CONFIG_IP6_NF_MANGLE=n and
CONFIG_IP_NF_ARPTABLES=n.
For optstript, the ipv6 code is so small that we can enable it if
netfilter ipv6 support exists. For mark, check if either classic
arptables or NFT_ARP_COMPAT is set.
Fixes: a9525c7f62 ("netfilter: xtables: allow xtables-nft only builds")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pipapo supports a more compact '4 bit group' format that is chosen when
the memory needed for the default exceeds a threshold (2mb).
Add coverage for those code paths, the existing tests use small sets that
are handled by the default representation.
This comes with a test script run-time increase, but I think its ok:
normal: 2m35s -> 3m9s
debug: 3m24s -> 5m29s (with KSFT_MACHINE_SLOW=yes).
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If, in a previous transfer, the controller sends more data than expected
by the DSPI target, SR.RFDF (RX FIFO is not empty) will remain asserted.
When flushing the FIFOs at the beginning of a new transfer (writing 1
into MCR.CLR_TXF and MCR.CLR_RXF), SR.RFDF should also be cleared.
Otherwise, when running in target mode with DMA, if SR.RFDF remains
asserted, the DMA callback will be fired before the controller sends any
data.
Take this opportunity to reset all Status Register fields.
Fixes: 5ce3cc5674 ("spi: spi-fsl-dspi: Provide support for DSPI slave mode operation (Vybryd vf610)")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-3-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The XSPI mode implementation in this driver still uses the EOQ flag to
signal the last word in a transmission and deassert the PCS signal.
However, at speeds lower than ~200kHZ, the PCS signal seems to remain
asserted even when SR[EOQF] = 1 indicates the end of a transmission.
This is a problem for target devices which require the deassertation of
the PCS signal between transfers.
Hence, this commit 'forces' the deassertation of the PCS by stopping the
module through MCR[HALT] after completing a new transfer. According to
the reference manual, the module stops or transitions from the Running
state to the Stopped state after the current frame, when any one of the
following conditions exist:
- The value of SR[EOQF] = 1.
- The chip is in Debug mode and the value of MCR[FRZ] = 1.
- The value of MCR[HALT] = 1.
This shouldn't be done if the last transfer in the message has cs_change
set.
Fixes: ea93ed4c18 ("spi: spi-fsl-dspi: Use EOQ for last word in buffer even for XSPI mode")
Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-2-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DSPI registers are NOT continuous, some registers are reserved and
accessing them from userspace will trigger external abort, add regmap
register access table to avoid below abort.
For example on S32G:
# cat /sys/kernel/debug/regmap/401d8000.spi/registers
Internal error: synchronous external abort: 96000210 1 PREEMPT SMP
...
Call trace:
regmap_mmio_read32le+0x24/0x48
regmap_mmio_read+0x48/0x70
_regmap_bus_reg_read+0x38/0x48
_regmap_read+0x68/0x1b0
regmap_read+0x50/0x78
regmap_read_debugfs+0x120/0x338
Fixes: 1acbdeb92c ("spi/fsl-dspi: Convert to use regmap and add big-endian support")
Co-developed-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-1-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When an entity from application B is killed, drm_sched_entity_kill()
removes all jobs belonging to that entity through
drm_sched_entity_kill_jobs_work(). If application A's job depends on a
scheduled fence from application B's job, and that fence is not properly
signaled during the killing process, application A's dependency cannot be
cleared.
This leads to application A hanging indefinitely while waiting for a
dependency that will never be resolved. Fix this issue by ensuring that
scheduled fences are properly signaled when an entity is killed, allowing
dependent applications to continue execution.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250515020713.1110476-1-lincao12@amd.com
Commit 835a0c10d3 ("leds: Rename simple directory to simatic") renames
the driver's directory to drivers/leds/simatic, but misses to adjust the
SIEMENS IPC LED DRIVERS section in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference. Adjust the file entry to this renaming.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250325092159.213463-1-lukas.bulwahn@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the root directory. Further improvements by
this change: automatic support of multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091234.22170-1-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: automatic clean up on removal, support of
multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091426.22258-2-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
This reverts commit 4a8f635a60.
Althought get_pid_task() internally already calls rcu_read_lock() and
rcu_read_unlock(), the find_vpid() was not.
The documentation for find_vpid() clearly states:
"Must be called with the tasklist_lock or rcu_read_lock() held."
Add proper rcu_read_lock/unlock() to protect the find_vpid().
Fixes: 4a8f635a60 ("bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic")
Reported-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Di Shen <di.shen@unisoc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250520054943.5002-1-xuewen.yan@unisoc.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
to_cxlfs() was declared 'inline' in the header but only defined in
drivers/cxl/core/features.c. This has worked because features.c was
the only file using the function and the definition happened to be
available in the same compilation unit.
However, in preparation for a second .c file using the header and
needing to call the function, the inline specifier became an issue.
Sparse flagged the declaration as invalid since 'inline' requires a
visible definition at the point of use.
Defining the function in the header was considered but rejected, as
it depends on internal symbols not visible at that level.
Remove the inline specifier to correct the linkage violation.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250521233625.1745849-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Prior changes ensured that when zpci_release_device() is called and it
removed the zdev from the zpci_list this instance can not be found via
the zpci_list anymore even while allowing re-add of reserved devices.
This only accounts for the overall lifetime and zpci_list addition and
removal, it does not yet prevent concurrent add of a new instance for
the same underlying device. Such concurrent add would subsequently cause
issues such as attempted re-use of the same IOMMU sysfs directory and is
generally undesired.
Introduce a new zpci_add_remove_lock mutex to serialize adding a new
device with removal. Together this ensures that if a struct zpci_dev is
not found in the zpci_list it was either already removed and torn down,
or its removal and tear down is in progress with the
zpci_add_remove_lock held.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The architecture assumes that PCI functions can be removed synchronously
as PCI events are processed. This however clashes with the reference
counting of struct pci_dev which allows device drivers to hold on to a
struct pci_dev reference even as the underlying device is removed. To
bridge this gap commit 2a671f77ee ("s390/pci: fix use after free of
zpci_dev") keeps the struct zpci_dev in ZPCI_FN_STATE_RESERVED state
until common code releases the struct pci_dev. Only when all references
are dropped, the struct zpci_dev can be removed and freed.
Later commit a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
moved the deletion of the struct zpci_dev from the zpci_list in
zpci_release_device() to the point where the device is reserved. This
was done to prevent handling events for a device that is already being
removed, e.g. when the platform generates both PCI event codes 0x304
and 0x308. In retrospect, deletion from the zpci_list in the release
function without holding the zpci_list_lock was also racy.
A side effect of this handling is that if the underlying device
re-appears while the struct zpci_dev is in the ZPCI_FN_STATE_RESERVED
state, the new and old instances of the struct zpci_dev and/or struct
pci_dev may clash. For example when trying to create the IOMMU sysfs
files for the new instance. In this case, re-adding the new instance is
aborted. The old instance is removed, and the device will remain absent
until the platform issues another event.
Fix this by allowing the struct zpci_dev to be brought back up right
until it is finally removed. To this end also keep the struct zpci_dev
in the zpci_list until it is finally released when all references have
been dropped.
Deletion from the zpci_list from within the release function is made
safe by using kref_put_lock() with the zpci_list_lock. This ensures that
the releasing code holds the last reference.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
