Instead of directly accessing the host_state member in struct hyp_page,
introduce static inline accessors to do it. The future hyp_state member
will follow the same pattern as it will need some logic in the accessors.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-5-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The page ownership state encoded as 0b11 is currently considered
reserved for future use, and PKVM_NOPAGE uses bit 2. In order to
simplify the relocation of the hyp ownership state into the
vmemmap in later patches, let's use the 'reserved' encoding for
the PKVM_NOPAGE state. The struct hyp_page layout isn't guaranteed
stable at all, so there is no real reason to have 'reserved' encodings.
No functional changes intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Most of the comments relating to pKVM page-tracking in nvhe/memory.h are
now either slightly outdated or outright wrong. Fix the comments.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When dealing with a guest with SVE enabled, make sure the host SVE
state is pinned at EL2 S1, and that the hypervisor vCPU state is
correctly initialised (and then unpinned on teardown).
Co-authored-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently, only EDP supports alpm. So, check for alpm support and prevent
the DP connector from accessing the alpm register if doing so is unsupported.
Fixes: acff6d6bde ("drm/i915/lobf: Add mutex for alpm update")
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250425132107.2926759-1-animesh.manna@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DRM GEM is the DRM memory management subsystem used by most modern
drivers; add a Rust abstraction for DRM GEM.
This includes the BaseObject trait, which contains operations shared by
all GEM object classes.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-8-dakr@kernel.org
[ Rework of GEM object abstractions
* switch to the Opaque<T> type
* fix (mutable) references to struct drm_gem_object (which in this
context is UB)
* drop all custom reference types in favor of AlwaysRefCounted
* bunch of minor changes and simplifications (e.g. IntoGEMObject
trait)
* write and fix safety and invariant comments
* remove necessity for and convert 'as' casts
* original source archive: https://archive.is/dD5SL
- Danilo ]
[ Fix missing CONFIG_DRM guards in rust/helpers/drm.c. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
fix the below warning messages:
ttm/ttm_bo.c:1098: warning: Function parameter or struct member 'hit_low' not described in 'ttm_bo_swapout_walk'
ttm/ttm_bo.c:1098: warning: Function parameter or struct member 'evict_low' not described in 'ttm_bo_swapout_walk'
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250423042442.762108-1-sunil.khatri@amd.com
There seem to be multiple USB device IDs used for these;
the one I have reports as 0b0e:030c when powered on.
(When powered off, it reports as 0b0e:0311.)
Signed-off-by: Joachim Priesner <joachim.priesner@web.de>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into driver-core-next
We need the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into char-misc-next
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With a recently added helper we can complete the conversion of
the GPIOLIB code to use devm_add_action() in all suitable cases.
So do this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220162238.2738038-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In some code we would like to know if the action in device managed resources
was added by devm_add_action() family of calls. Introduce a helper for that.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220162238.2738038-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a newly created header linux/device/devres.h that gathers
device managed APIs, so users won't need to include entire device.h
for only these ones. Move devm_*_action*() APIs to devres.h as well.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220162238.2738038-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
RTL8723BE found on some ASUSTek laptops, such as F441U and X555UQ with
subsystem ID 11ad:1723 are known to output large amounts of PCIe AER
errors during and after boot up, causing heavy lags and at times lock-ups:
pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
pcieport 0000:00:1c.5: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
pcieport 0000:00:1c.5: [ 0] RxErr
Disable ASPM on this combo as a quirk.
This patch is a revision of a previous patch (linked below) which
attempted to disable ASPM for RTL8723BE on all Intel Skylake and Kaby Lake
PCIe bridges. I take a more conservative approach as all known reports
point to ASUSTek laptops of these two generations with this particular
wireless card.
Please note, however, before the rtl8723be finishes probing, the AER
errors remained. After the module finishes probing, all AER errors would
indeed be eliminated, along with heavy lags, poor network throughput,
and/or occasional lock-ups.
Cc: <stable@vger.kernel.org>
Fixes: a619d1abe2 ("rtlwifi: rtl8723be: Add new driver")
Reported-by: Liangliang Zou <rawdiamondmc@outlook.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218127
Link: https://lore.kernel.org/lkml/05390e0b-27fd-4190-971e-e70a498c8221@lwfinger.net/T/
Tested-by: Liangliang Zou <rawdiamondmc@outlook.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422061755.356535-1-jeffbai@aosc.io
A MCC (multi-channel concurrency) schedule is like the following.
|< mcc interval >|
|< duration ref >|< duration aux >|
|< tob ref >|< toa ref >|< tob aux >|< toa aux >|
V V
tbtt ref tbtt aux
|< beacon offset >|
Original logic might unexpectedly calculate toa (time offset ahead) of
auxiliary role to be negative even when there is no role timing limit.
If toa-aux is negative, TBTT-aux would in logic fall into duration-ref.
Then, if auxiliary role is GO unfortunately, it cannot guarantee that
beacons will TX well. So now, when deciding the lower bound of toa-ref,
take toa-aux into account. Make toa-aux at least be zero in normal cases.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-13-pkshih@realtek.com
Since tob (time offset behind) could be negative, change the type of tob in
microsecond to s32. And, refine accumulation with while-loop by calculation
with roundup_u64(). Besides, as long as one of the MCC roles is GO, use the
short MCC start time.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-12-pkshih@realtek.com
MCC has a courtesy mechanism which allows one role to use another's
duration in a given cycle. Originally, this courtesy mechanism only
supports in one direction. However, in some field cases, both of MCC
roles may simultaneously have timing configurations that are not good
enough. So, support courtesy mechanism in both directions.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-11-pkshih@realtek.com
MCC has a courtesy mechanism which allows one role to use another's
duration in a given cycle. Courtesy mechanism will be enabled when
one role has a not perfect duration. Otherwise, not. When MCC updates,
duration of each role will be re-calculated. And then, the new courtesy
config might be different from the old one. However, to change courtesy
config, the entire MCC plan requires to be renewed when MCC updates.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-10-pkshih@realtek.com
MCC will limit the time a role can use in a schedule according to the
periodic NoA. Original logic didn't consider the case where NoA start
time has passed. It might lead to inaccurate result. So, tweak it.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-9-pkshih@realtek.com
There are two roles during MCC and the offset between their TBTT is called
beacon offset. Originally, when MCC runs GO+STA mode, it used fixed beacon
offset to simplify some logic because GO role can master its TSF. However,
if MCC is stopped and restarted before a same GO is down, its TSF might be
discontinuous. Then, there might be undefined behavior happens in GC sides.
So, to let a same GO have a continuous TSF, MCC no longer changes its TSF
to meet a fixed beacon offset. Instead, GO+STA mode also calculates beacon
offset dynamically as what GC+STA mode did.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-8-pkshih@realtek.com
When APs or GOs are up, their TSF start point are randomized to avoid
collisions. However, the TSF of an existing AP/GO would be randomized
multiple times. It caused the TSF is discontinuous to the corresponding
STA/GC sides. So, once TSF has been randomized, don't re-randomize it
unless SER (system error recovery) happens unfortunately.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-7-pkshih@realtek.com
Since FW cannot handle HW scan process and MCC (multi-channel concurrency)
mode simultaneously, if a HW scan is requested during MCC, MCC mode will be
paused temporarily. Then, the GO role if any might be absent. So, calculate
an estimated time for the requested HW scan process and search for existing
GO roles to fill one-time NoA.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-6-pkshih@realtek.com
FW has a limited amount of channels that can be dealt with by one HW scan
H2C command. Based on the limit, channels in scan request might be parsed
into SW structure piece by piece along with multiple HW scan H2C commands.
But, in order to estimate things of entire HW scan process, it's required
to have the whole parsed channel list when HW scan is going to start. So,
tweak HW scan flow to prepare the whole channel list ahead. Still, each HW
scan H2C command takes allowed amount of channels from the list according
to the limit.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-5-pkshih@realtek.com
These stuffs have no suffix, but not universal, and only work for Wi-Fi 6.
Since the corresponding HW scan struct/func of Wi-Fi 7 have suffix "_be",
to avoid misunderstanding and improve readability, also add suffix "_ax"
to these Wi-Fi 6 stuffs.
(No logic is changed.)
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-4-pkshih@realtek.com
A new ACPI table entry format for TAS is defined, which includes
a "specific country" field. In this field, determine which
country can enable TAS.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-3-pkshih@realtek.com
Intermittent beacon loss from specific AP triggers disconnection
and reconnection. Increasing the beacon loss count will make the
connection more stable.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422014620.18421-2-pkshih@realtek.com
This adds all the pin mappings on the WiFi/BT header on
the SOPINE Baseboard/A64-LTS. They're disabled by default
as the modules don't ship by default. This includes, where
they haven't been already, UART1 for BT and mmc1 for WiFi.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://patch.msgid.link/20250420094823.954073-3-pbrobinson@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
This adds all the pin mappings on the WiFi/BT header on
the original Pine64. They're disabled by default as the
modules don't ship by default. This includes, where they
haven't been already, UART1 for BT and mmc1 for WiFi.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://patch.msgid.link/20250420094823.954073-2-pbrobinson@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
According to https://radxa.com/products/cubie/a5e,
the name of this board should be "Radxa Cubie A5E".
This is also consistent with the dt-bindings.
Fixes: 80e0fb4e491b ("arm64: dts: allwinner: a523: add Radxa A5E support")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250416100006.82920-1-amadeus@jmu.edu.cn
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Since commit 3c3606793f ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
sun8i-h3-nanopi-neo-air.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250424084737.105215-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Since commit 3c3606793f ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
sun50i-h6-orangepi-3.dtb: sdio-wifi@1: $nodename:0: 'sdio-wifi@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250424084737.105215-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
All Allwinner H616/H618 SoCs contain a Mali G31 MP2 GPU.
Enable the DT nodes for that GPU, and specify the regulator providing
power to the VDD_GPU pins of the package. The rest of the DT node is set
by the SoC, so is not board specific.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250416224839.9840-5-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner H616 SoC contains a Mali-G31 MP2 GPU, which is of the Mali
Bifrost family. There is a power domain specifically for that GPU, which
needs to be enabled to make use of the it.
Add the DT nodes for those two devices, and link them together through
the "power-domains" property.
Any board wishing to use the GPU would need to enable the GPU node and
specify the "mali-supply" regulator.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250416224839.9840-4-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Add support for headphone insertion detection via GPIO for the
RG35XX series, and add the corresponding routing to the codec node.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
--
Changelog v1..v2:
- Remove vendor prefix from GPIO description.
- Whitespace fix
Changelog v2..v3:
- Add Tested-by tag
Link: https://patch.msgid.link/20250214220247.10810-5-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
'clock-latency-ns' is not a valid property for CPU nodes. It belongs in
OPP table (which has it). Drop them from the CPU nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250410-dt-cpu-schema-v2-1-63d7dc9ddd0a@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The preferred node name for cooling map nodes is a 'map' prefix. Use
'map0' like most other platforms.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250409203613.1506047-1-robh@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Chameleon board is an OpenHardware devboard made by YuzukiTsuru.
The form factor resembles the Raspberry Pi Model A boards, though it
differs significantly in its features:
- Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache, 1.4 GHz)
- between 512MiB and 2GiB DDR3 DRAM
- up to 128 GiB eMMC flash
- AXP313a PMIC
- 100 Mbit/s Ethernet pins on a header
- XR829 WIFI+Bluetooth chip
- 4 * USB 2.0 USB-C ports
- microSD card slot
- 3.5mm A/V port
Add the devicetree describing the board's peripherals and their
connections.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307005712.16828-16-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
In nfs3_get_acl(), the local variable status is assigned the result of
nfs_refresh_inode() inside the *switch* statement, but that value gets
overwritten in the next *if* statement's true branch and is completely
ignored if that branch isn't taken...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/c32dced7-a4fa-43c0-aafe-ef6c819c2f91@omp.ru
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In nfs_direct_write_completion(), the local variable req isn't used outside
the *while* loop and is assigned to right at the start of that loop's body,
so its initializer appears useless -- drop it; then move the declaration to
the loop body (which happens to have a pointless empty line anyway)...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/416219f5-7983-484b-b5a7-5fb7da9561f7@omp.ru
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since struct nfs4_pnfs_ds should not be shared between net namespaces,
move from a global list of objects to a per-netns list and spinlock.
Tested-by: Sargun Dillon <sargun@sargun.me>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/20250410-nfs-ds-netns-v2-2-f80b7979ba80@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Currently, different NFS clients can share the same DS connections, even
when they are in different net namespaces. If a containerized client
creates a DS connection, another container can find and use it. When the
first client exits, the connection will close which can lead to stalls
in other clients.
Add a net namespace pointer to struct nfs4_pnfs_ds, and compare those
value to the caller's netns in _data_server_lookup_locked() when
searching for a nfs4_pnfs_ds to match.
Reported-by: Omar Sandoval <osandov@osandov.com>
Reported-by: Sargun Dillon <sargun@sargun.me>
Closes: https://lore.kernel.org/linux-nfs/Z_ArpQC_vREh_hEA@telecaster/
Tested-by: Sargun Dillon <sargun@sargun.me>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/r/20250410-nfs-ds-netns-v2-1-f80b7979ba80@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When debugging I/O issues, we want to see not just the NFS level errors,
but also the RPC level problems, so record both in the tracepoints.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
