If we have a fatal ENETDOWN or ENETUNREACH error, then the layoutreturn
on close code should also handle that as fatal, and free the layouts.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Ensure that the NFSv4 error handling code recognises the
RPC_TASK_NETUNREACH_FATAL flag, and handles the ENETDOWN and ENETUNREACH
errors accordingly.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The Radxa A5E is a development board using the Allwinner A527 SoC, which
is using the same die as the A523 SoC, just exposing the pins of more
peripherals (like HDMI or the 2nd MAC). The board features:
- Allwinner A527/T527 SoC: 8 ARM Cortex-A55 cores, Mali-G57 MC1 GPU
- 1GiB/2GiB/4GiB LPDDR4 DRAM
- AXP717 + AXP323 PMICs
- Raspberry-Pi-2 compatible 40pin GPIO header
- 1 USB 2.0 type C port (OTG), also power supply
- 1 USB 3.0 type A host port (multiplexed with M.2 slot)
- 1 M.2 M-key 2230 slot, with 1 PCIe2.1 lane connected (multiplexed
with USB 3.0 port)
- MicroSD slot
- optional eMMC, 8, 16 or 32GB available
- optional on-board 16MiB bootable SPI NOR flash
- two 1Gbps Ethernet ports (via MAXIO MAE0621A PHYs)
- PoE header for optional supply circuit on one Ethernet port
- WiFi 802.11 a/b/g/n/ac/ax (LB-Link BL-M8800DS2 module using AIC8800)
- HDMI port
- camera and LCD connectors
- power supply via USB-C connector (but no PD) or GPIO header pins
This .dts describes the devices as far as we support them at the moment.
The PMIC rails have been assigned as per the schematics.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307005712.16828-14-andre.przywara@arm.com
[wens@csie.org: Squash in SD card detect pull resistor fix]
Link: https://patch.msgid.link/20250425003422.3465-1-andre.przywara@arm.com
[wens@csie.org: Rename dts file to sun55i-a527-cubie-a5e.dts]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The force_alloc flag was removed from TTM / Xe but updating the
selftests to new function interfaces was missed. Remove argument from
xe_bo_evict in selftests.
v2:
- Fix dma-buf, migrate selftests (CI)
Fixes: 55df7c0c62 ("drm/ttm/xe: drop unused force_alloc flag")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://lore.kernel.org/r/20250428022318.877860-1-matthew.brost@intel.com
'struct chg_map' is not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
While at it, also constify a few other arrays.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
14263 1744 0 16007 3e87 drivers/power/supply/wm831x_power.o
After:
=====
text data bss dec hex filename
14695 1288 0 15983 3e6f drivers/power/supply/wm831x_power.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0edde57b691db7f920d121fdbd5ebc3fb24f30f1.1743787625.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The BQ24193 is most similar to the BQ24192. This is used in many Nvidia
Tegra devices such as the SHIELD Portable. This variant works as-is with
the existing BQ24192 code, but cannot be probed with a simple fallback
compatible to ti,bq24192. So add it same as how BQ24196 is handled.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250421-bq24193-v1-2-f125ef396d24@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The BQ24193 is most similar to the BQ24192. This is used in many Nvidia
Tegra devices such as the SHIELD Portable.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250421-bq24193-v1-1-f125ef396d24@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
GCC 15's new -Wunterminated-string-initialization notices that one of
the sysfs attr strings would lack the implicit trailing NUL byte during
initialization:
drivers/power/supply/power_supply_sysfs.c:183:57: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (32 chars into 31 available) [-Wunterminated-string-initialization]
183 | POWER_SUPPLY_ATTR(CHARGE_CONTROL_START_THRESHOLD),
| ^
drivers/power/supply/power_supply_sysfs.c:36:23: note: in definition of macro '_POWER_SUPPLY_ATTR'
36 | .attr_name = #_name "\0", \
| ^~~~~
drivers/power/supply/power_supply_sysfs.c:183:9: note: in expansion of macro 'POWER_SUPPLY_ATTR'
183 | POWER_SUPPLY_ATTR(CHARGE_CONTROL_START_THRESHOLD),
| ^~~~~~~~~~~~~~~~~
However, the macro used was explicitly adding a trailing NUL byte (which
is not needed). Remove this to avoid the GCC warning. No binary
differences are seen after this change (there was always run for a NUL
byte, it's just that the _second_ NUL byte was getting truncated).
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250416222740.work.569-kees@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Multiple applications may access the battery gauge at the same time, so
the gauge may be busy and EBUSY will be returned. The driver will set a
flag to record the EBUSY state, and this flag will be kept until the next
periodic update. When this flag is set, bq27xxx_battery_get_property()
will just return ENODEV until the flag is updated.
Even if the gauge was busy during the last accessing attempt, returning
ENODEV is not ideal, and can cause confusion in the applications layer.
Instead, retry accessing the I2C to update the flag is as expected, for
the gauge typically recovers from busy state within a few milliseconds.
If still failed to access the gauge, the real error code would be returned
instead of ENODEV (as suggested by Pali Rohár).
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jerry Lv <Jerry.Lv@axis.com>
Link: https://lore.kernel.org/r/20250415-foo-fix-v2-1-5b45a395e4cc@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |'. Correct mixtures of the style or any other
indentations to use preferred 4-spaces.
No functional changes here, but saves some comments during reviews
of new patches built on the existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250318081428.33979-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This driver's purpose is to parse boot modes described in DT, via key
(node name) / value pairs, and to match them to a reboot mode requested
by the kernel. Unfortunately, DT node names can not contain certain
characters, like space ' ' or comma ',' or slash '/', while the
requested reboot mode may.
This is a problem because it makes it impossible to match reboot modes
containing any of those characters.
For example, this makes it impossible to communicate DM verity errors
to the boot loader - DM verity errors trigger a reboot with mode
"dm-verity device corrupted" in drivers/md/dm-verity-target.c and
devices typically have to take action in that case [1]. Changing this
string itself is not feasible, see e.g. discussion in [2], but would
also just cover this one case.
Another example is Android, which may use comma in the reboot mode
string, e.g. as "shutdown,thermal" in [3].
The kernel also shouldn't prescribe what characters are allowed inside
the boot mode string for a user to set. It hasn't done this so far, and
introducing such a restriction would be an interface break and
arbitrarily enforce a random new policy.
Therefore, update this driver to do another round of string matching,
after replacing the common characters mentioned above with dash '-', if
a match hasn't been found without doing said replacement.
This now allows us to have DT entries of e.g.:
mode-dm-verity-device-corrupted = <...>
and so on.
Link: https://cs.android.com/android/kernel/superproject/+/android14-gs-pixel-6.1:private/google-modules/power/reset/exynos-gs101-reboot.c;l=144 [1]
Link: https://lore.kernel.org/all/CAAFS_9FuSb7PZwQ2itUh_H7ZdhvAEiiX7fhxJ4kmmv9JCaHmkA@mail.gmail.com/ [2]
Link: https://cs.android.com/android/platform/superproject/main/+/main:system/core/init/reboot_utils.cpp;drc=79ad1e2e9bf1628c141c8cd2fbb4f3df61a6ba75;l=122 [3]
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250307-reboot-mode-chars-v1-1-d83ff95da524@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This patch adds a small optimization to the low-level at91_reset()
function, which includes:
- Removes the extra branch, since the following store operations
already have proper condition checks.
- Removes the definition of the clobber register r4, since it is
no longer used in the code.
Fixes: fcd0532fac ("power: reset: at91-reset: make at91sam9g45_restart() generic")
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250307053809.20245-1-eagle.alexander923@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Register compatible and cmu_info data to support clock CPUCL0(CPU
Cluster 0), this provides clock for CPUCL0_SWTICH/DBG/CLUSTER. These
clocks are required early during boot for the CPUs, so they are declared
using CLK_OF_DECLARE instead of being registered through a platform
driver.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250423044153.1288077-3-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add cpucl0 clock definitions.
CPUCL0 refers to CPU Cluster 0, which provide clock support
for the CPUs on Exynosauto V920 SoC.
Signed-off-by: Shin Son <shin.son@samsung.com>
Link: https://lore.kernel.org/r/20250423044153.1288077-2-shin.son@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The client mask has been reduced from 8 bits on V3D 4.1 to 7 bits
on V3D 7.1, so the ranges for each client are not compatible.
On V3D 7.1, the CSD client can also report MMU errors.
Therefore, add its AXI ID to the IDs list.
Fixes: 0ad5bc1ce4 ("drm/v3d: fix up register addresses for V3D 7.x")
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250425122522.18425-2-jmcasanova@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
In the case of MMU errors caused by the TFU unit, the
client that causes the MMU error is expected to be reported.
But in the case of MMU TFU errors, a non existing client was
being reported. This happened because the client calculation
was taking into account more than the bits 0-7 from the
axi_id that were representing the client.
[ 27.845132] v3d fec00000.v3d: MMU error from client ? (13) at 0x3bb1000, pte invalid
Masking the bits and using the correct axi_id ranges fixes the
calculation to report the real guilty client on V3D 4.1 and 4.2.
Make the MMU error print axi_id with hexadecimal as used in the
ranges.
Fixes: 38c2c7917a ("drm/v3d: Fix and extend MMU error handling.")
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250425122522.18425-1-jmcasanova@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The documentation for the phy_power_off() function explicitly says that it
must be called before phy_exit().
Hence, follow the same rule in rockchip_pcie_phy_deinit().
Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
[mani: commit message change]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://patch.msgid.link/20250417142138.1377451-1-didi.debian@cknow.org
Some of the callers of rockchip_pcie_link_up() are open coding the
rockchip_pcie_link_up() function, leading to code duplication. So switch
them to use rockchip_pcie_link_up() function.
Also, use the FIELD_GET() macro to simplify the link up check in
rockchip_pcie_link_up().
Signed-off-by: Hans Zhang <18255117159@163.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250427125316.99627-4-18255117159@163.com
Register definitions were scattered with ambiguous names (e.g.,
PCIE_RDLH_LINK_UP_CHGED in PCIE_CLIENT_INTR_STATUS_MISC) and lacked
hierarchical grouping.
Group registers and their associated bitfields logically. This improves
maintainability and aligns the code with hardware documentation.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250427125316.99627-3-18255117159@163.com
The PCIE_CLIENT_GENERAL_DEBUG register offset is defined but never
used in the driver. It's presence adds noise to the register map.
Remove this unused definition to keep the register list minimal and aligned
with actual hardware usage.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250427125316.99627-2-18255117159@163.com
Define vqmmc regulator-gpio for usdhc2 with vin-supply
coming from LDO5.
Without this definition LDO5 will be powered down, disabling
SD card after bootup. This has been introduced in commit
f5aab0438e ("regulator: pca9450: Fix enable register for LDO5").
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Fixes: f5aab0438e ("regulator: pca9450: Fix enable register for LDO5")
Tested-by: Manuel Traut <manuel.traut@mt.com>
Reviewed-by: Philippe Schenker <philippe.schenker@impulsing.ch>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@mt.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct tid_rb_node **", but the return type will be
"struct rb_node **". These are the same allocation size (pointer size),
but the types do not match. Adjust the allocation type to match the
assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250426061247.work.261-kees@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "unsigned long **", but the returned type will be
"long **". These are the same allocation size (pointer size), but the
types do not match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250426061208.work.000-kees@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The look up table (LUT) setting would be lost during the PCIe suspend on
i.MX95 SoC. So to ensure proper functionality after resume, save it during
suspend and restore it while resuming.
Fixes: 9d6b1bd6b3 ("PCI: imx6: Add i.MX8MQ, i.MX8Q and i.MX95 PM support")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-8-hongxing.zhu@nxp.com
PLL lock is required to ensure that the PLL clock is stable before enabling
the controller in i.MX95 SoC.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-7-hongxing.zhu@nxp.com
ERR051586: Compliance with 8GT/s Receiver Impedance ECN.
The default value of GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] is 1 which
makes receiver non-compliant with the ZRX-DC parameter for 2.5 GT/s when
operating at 8 GT/s or higher. It causes unnecessary timeout in L1.
So the workaround is to set GEN3_RELATED_OFF[GEN3_ZRXDC_NONCOMPL] to 0.
Add this workaround in the dw_pcie_host_ops::post_init() callback for
i.MX95 platforms.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-6-hongxing.zhu@nxp.com
ERR051624: The Controller Without Vaux Cannot Exit L23 Ready Through Beacon
or PERST# De-assertion
When the auxiliary power is not available, the controller cannot exit from
L23 Ready with beacon or PERST# de-assertion when main power is not
removed. So the workaround is to set SS_RW_REG_1[SYS_AUX_PWR_DET] to 1.
This workaround is required irrespective of whether Vaux is supplied to the
link partner or not.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-5-hongxing.zhu@nxp.com
Add toggling core reset for i.MX95 to align with PHY's power-up sequence.
Note that the register is named as IMX95_PCIE_COLD_RST in hardware, though
it is used to reset the PCIe core.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[mani: subject and description rewording]
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416081314.3929794-4-hongxing.zhu@nxp.com
Since the DWC driver is already calling dw_pcie_wait_for_link() after
calling the start_link() callback, remove the redundant
dw_pcie_wait_for_link() call from imx_pcie_start_link(). It is still
required to call this function for controllers supporting Gen 2 and higher
link speeds.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416081314.3929794-3-hongxing.zhu@nxp.com
The current link setup procedure has one workaround to detect the devices
behind PCIe switches on some i.MX6 platforms. But this workaround is not
needed on recent i.MX7 platforms. So skip the workaround for platforms that
do not set the flag and start LTSSM directly.
Also, change the flag name from IMX_PCIE_FLAG_IMX_SPEED_CHANGE to
IMX_PCIE_FLAG_SPEED_CHANGE_WORKAROUND to match the usecase.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250416081314.3929794-2-hongxing.zhu@nxp.com
In the case of PERST# deassert, non-sticky registers will get reset to
their hardware default state and EXT_CAP registers are one among them. But
since the broken ATS cap is hidden only in dw_pcie_ep_ops::pre_init()
callback which is not gettting called during PERST# deassert, it results in
the capability getting advertised again.
So move it to dw_pcie_ep_ops::init() to fix it.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/1744594109-209312-1-git-send-email-shawn.lin@rock-chips.com
L0s capability isn't enabled on all Rockchip SoCs by default, so enable it
in order to make ASPM L0s work on Rockchip platforms.
Testing the L0s for a long time revealed that the default N_FTS value of
210 in the hardware doesn't work stable and causes LTSSM to switch between
L0s and Recovery states. This leads to long exit latency and also causes
link down sometimes. So override the value to the max 255, which seems to
work fine under both PHYs used on Rockchip platforms.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: subject and description rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/1744850111-236269-2-git-send-email-shawn.lin@rock-chips.com
rockchip_pcie_link_up() currently has two issues:
1. Value 0x11 of PCIE_L0S_ENTRY corresponds to L0 state, not L0S. So the
naming is wrong from the very beginning.
2. Checking for value 0x11 treats other states like L0S and L1 as link
down, which is wrong.
Hence, remove the PCIE_L0S_ENTRY check and also its definition. This allows
adding ASPM support in the successive commits.
Fixes: 0e898eb8df ("PCI: rockchip-dwc: Add Rockchip RK356X host controller driver")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/1744850111-236269-1-git-send-email-shawn.lin@rock-chips.com
Recently the rollback region has been changed into an
idle interrupt region [1]. This patch make the appropriate
changes renaming functions and macro, to reflect the change.
[1] https://lore.kernel.org/linux-mips/20250403161143.361461-2-marco.crivellari@suse.com/
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix missing .cpuidle.text section assignment for r4k_wait() to correct
backtracing with nmi_backtrace().
Fixes: 97c8580e85 ("MIPS: Annotate cpu_wait implementations with __cpuidle")
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
MIPS re-enables interrupts on its idle routine and performs
a TIF_NEED_RESCHED check afterwards before putting the CPU to sleep.
The IRQs firing between the check and the 'wait' instruction may set the
TIF_NEED_RESCHED flag. In order to deal with this possible race, IRQs
interrupting __r4k_wait() rollback their return address to the
beginning of __r4k_wait() so that TIF_NEED_RESCHED is checked
again before going back to sleep.
However idle IRQs can also queue timers that may require a tick
reprogramming through a new generic idle loop iteration but those timers
would go unnoticed here because __r4k_wait() only checks
TIF_NEED_RESCHED. It doesn't check for pending timers.
Fix this with fast-forwarding idle IRQs return address to the end of the
idle routine instead of the beginning, so that the generic idle loop
handles both TIF_NEED_RESCHED and pending timers.
CONFIG_CPU_MICROMIPS has been removed along with the nop instructions.
There, NOPs are 2 byte in size, so change the code with 3 _ssnop which are
always 4 byte and remove the ifdef. Added ehb to make sure the hazard
is always cleared.
Fixes: c65a5480ff ("[MIPS] Fix potential latency problem due to non-atomic cpu_wait.")
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This hardware has ALC274 codec with speaker NID 0x17 and line out
NID 0x16 for audio output. The line out is routed correctly but
the speaker is not. Thus the volume can't be controlled.
This patch removes DAC NID 0x06 (without volume control) from the
connection list for speaker NID 0x17. Routing both speaker and line
out pins to DAC NID 0x02 which controls the output volume.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20250425103618.534951-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Delete the hda_cs_dsp module and move the one array and one function
that is used by the cs35l41_hda driver into that driver.
The cs35l41 and cs35l56 drivers stopped creating ALSA controls to
wrap firmware controls. The reasons are explained in:
commit 312c04cee4 ("ALSA: hda: cs35l41: Stop creating ALSA Controls
for firmware coefficients")
and
commit 34e1b1bb73 ("ALSA: hda: cs35l56: Stop creating ALSA controls
for firmware coefficients")
The cs35l56_hda driver now doesn't use hda_cs_dsp_ctl at all. The
cs35l41_hda driver only uses the small array of firmware names and the
function to read a control value. All other functions and data in
hda_cs_dsp_ctl are unused. There is no need to keep a separate module
for such a small amount of data and code that is only used by one driver,
so remove the whole module.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250424181214.66759-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use tabs instead of spaces in regs_query_register_offset() and
syscall_trace_leave(), and properly indent multiple getters.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Added support for starting CPUs in parallel on EyeQ to speed up boot time.
On EyeQ5, booting 8 CPUs is now ~90ms faster.
On EyeQ6, booting 32 CPUs is now ~650ms faster.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
GCC 15 changed the default C standard dialect from gnu17 to gnu23,
which should not have impacted the kernel because it explicitly requests
the gnu11 standard in the main Makefile. However, mips/vdso code uses
its own CFLAGS without a '-std=' value, which break with this dialect
change because of the kernel's own definitions of bool, false, and true
conflicting with the C23 reserved keywords.
include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
Add -std as specified in KBUILD_CFLAGS to the decompressor and purgatory
CFLAGS to eliminate these errors and make the C standard version of these
areas match the rest of the kernel.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
