- Add a missing refcount decrement in ata_scsi_dev_rescan() when
the device or its queue is not running. In the case where the
device is running, the recount is already decremented properly
(Yihang Li)
- Generate the proper sense code for a Security locked device.
There was a regression caused by a recent change of how sense
data is generated for commands that did not provide any sense
data. This broke system suspend for Security locked devices.
Generate the sense data that the SCSI disk driver expects for
a Security locked device so that system supend works again
(me)
- Set capacity to zero for a Security locked device.
All I/O commands will be aborted by a Security locked device.
Thus, the block layer disk partition scanning will result in
a bunch of, for the user, confusing I/O errors in dmesg during
boot. Since a Security locked device is unusable anyway, set
the capacity to zero, to avoid the disk partition scanning
during boot. We still create the block device in /dev such
that the user may unlock the device using e.g. hdparm (me)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCaSB/+AAKCRDJZDGjmcZN
cswtAP4l1Ui8d6PwHnxVvOlv1cWO/K+7XboiGZNFphf7QDZhPQD+J41BG/YNyNcB
Ma716tdF1UVayUB2OItsX0gSmmz9KgI=
=0b5E
-----END PGP SIGNATURE-----
Merge tag 'ata-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a missing refcount decrement in ata_scsi_dev_rescan() when
the device or its queue is not running.
In the case where the device is running, the recount is already
decremented properly (Yihang Li)
- Generate the proper sense code for a Security locked device.
There was a regression caused by a recent change of how sense
data is generated for commands that did not provide any sense
data. This broke system suspend for Security locked devices.
Generate the sense data that the SCSI disk driver expects for a
Security locked device so that system suspend works again (me)
- Set capacity to zero for a Security locked device.
All I/O commands will be aborted by a Security locked device.
Thus, the block layer disk partition scanning will result in
a bunch of, for the user, confusing I/O errors in dmesg during
boot.
Since a Security locked device is unusable anyway, set the capacity
to zero, to avoid the disk partition scanning during boot. We still
create the block device in /dev such that the user may unlock the
device using e.g. hdparm (me)
* tag 'ata-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Set capacity to zero for a security locked drive
ata: libata-scsi: Fix system suspend for a security locked drive
ata: libata-scsi: Add missing scsi_device_put() in ata_scsi_dev_rescan()
- Fix register naming in the Mediatek mt8189 driver.
- Select REGMAP_MMIO for the Realtek RTD driver.
- Fix the number of items in groups in the Toshiba
Visconti driver.
- Fix a memory leak in the Cirrus CS42L43 driver.
- Fix a deadlock (!) in Qualcomm pinmux configuration.
- Fix use of uninitialized memory and list initialization
in the S32CC pin controller.
-----BEGIN PGP SIGNATURE-----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=dfY2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
- fix a use-after-free bug in GPIO character device code
- update MAINTAINERS
-----BEGIN PGP SIGNATURE-----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=nTA4
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a use-after-free bug in GPIO character device code
- update MAINTAINERS
* tag 'gpio-fixes-for-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: update my email address
gpio: cdev: make sure the cdev fd is still active before emitting events
Fully initialize *ctx, including the buf field which sha256_init()
doesn't initialize, to avoid a KMSAN warning when comparing *ctx to
orig_ctx. This KMSAN warning slipped in while KMSAN was not working
reliably due to a stackdepot bug, which has now been fixed.
Fixes: 6733968be7 ("lib/crypto: tests: Add tests and benchmark for sha256_finup_2x()")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251121033431.34406-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Apparently as of version 2.42, glibc headers define AT_RENAME_NOREPLACE
and some of the other flags for renameat2() and friends in <stdio.h>.
Which would all be fine, except for inexplicable reasons glibc decided
to define them _differently_ from the kernel definitions, which then
makes some of our sample code that includes both kernel headers and user
space headers unhappy, because the compiler will (correctly) complain
about redefining things.
Now, mixing kernel headers and user space headers is always a somewhat
iffy proposition due to namespacing issues, but it's kind of inevitable
in our sample and selftest code. And this is just glibc being stupid.
Those defines come from the kernel, glibc is exposing the kernel
interfaces, and glibc shouldn't make up some random new expressions for
these values.
It's not like glibc headers changed the actual result values, but they
arbitrarily just decided to use a different expression to describe those
values. The kernel just does
#define AT_RENAME_NOREPLACE 0x0001
while glibc does
# define RENAME_NOREPLACE (1 << 0)
# define AT_RENAME_NOREPLACE RENAME_NOREPLACE
instead. Same value in the end, but very different macro definition.
For absolutely no reason.
This has since been fixed in the glibc development tree, so eventually
we'll end up with the canonical expressions and no clashes. But in the
meantime the broken headers are in the glibc-2.42 release and have made
it out into distributions.
Do a minimal work-around to make the samples build cleanly by just
undefining the affected macros in between the user space header include
and the kernel header includes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ACPI ECRD and ECWR functions have a 10ms sleep at the end. It turns
out, that this is sometimes needed to avoid I2C transmission failures,
especially for functions doing regmap_update_bits (and thus read + write
shortly after each other). This fixes problems like the following
appearing in the kernel log:
leds platform::micmute: Setting an LED's brightness failed (-6)
leds platform::kbd_backlight: Setting an LED's brightness failed (-6)
The ACPI QEVT function used to read the interrupt status register also
has a 10ms sleep at the end. Without that there are problems with
reading multiple events following directly after each other resulting
in the following error message being logged:
thinkpad-t14s-ec 4-0028: Failed to read event
Fixes: 60b7ab6ce0 ("platform: arm64: thinkpad-t14s-ec: new driver")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Link: https://patch.msgid.link/20251119-thinkpad-t14s-ec-improvements-v2-2-441219857c02@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix a race condition, that an input key related interrupt might be
triggered before the input handler has been registered, which results
in a NULL pointer dereference. This can happen if the user enables
the keyboard backlight shortly before the driver is being probed.
This fixes the following backtrace visible in dmesg:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e0
...
Call trace:
sparse_keymap_report_event+0x2c/0x978 [sparse_keymap] (P)
t14s_ec_irq_handler+0x190/0x3e8 [lenovo_thinkpad_t14s]
irq_thread_fn+0x30/0xb8
irq_thread+0x18c/0x3b0
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Fixes: 60b7ab6ce0 ("platform: arm64: thinkpad-t14s-ec: new driver")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Link: https://patch.msgid.link/20251119-thinkpad-t14s-ec-improvements-v2-1-441219857c02@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The sii902x driver was caching HDMI detection state in a sink_is_hdmi field
and checking it in mode_set() to determine whether to set HDMI or DVI
output mode. This approach had two problems:
1. With DRM_BRIDGE_ATTACH_NO_CONNECTOR (used by modern display drivers like
TIDSS), the bridge's get_modes() is never called. Instead, the
drm_bridge_connector helper calls the bridge's edid_read() and updates the
connector itself. This meant sink_is_hdmi was never populated, causing the
driver to default to DVI mode and breaking HDMI audio.
2. The mode_set() callback doesn't receive atomic state or connector
pointer, making it impossible to check connector->display_info.is_hdmi
directly at that point.
Fix this by moving the HDMI vs DVI decision from mode_set() to
atomic_enable(), where we can access the connector via
drm_atomic_get_new_connector_for_encoder(). This works for both connector
models:
- With DRM_BRIDGE_ATTACH_NO_CONNECTOR: Returns the drm_bridge_connector
created by the display driver, which has already been updated by the
helper's call to drm_edid_connector_update()
- Without DRM_BRIDGE_ATTACH_NO_CONNECTOR (legacy): Returns the connector
embedded in sii902x struct, which gets updated by the bridge's own
get_modes()
Fixes: 3de47e1309 ("drm/bridge: sii902x: use display info is_hdmi")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251030151635.3019864-1-devarsht@ti.com
't->len' is an unsigned integer, while 'watermark' and 'txfifosize' are
u8. Using min_t with typeof(watermark) forces both values to be cast to
u8, which truncates len when it exceeds 255. For example, len = 4096
becomes 0 after casting, resulting in an incorrect watermark value.
Use a wider type in min_t to avoid truncation and ensure the correct
minimum value is applied.
Fixes: a750050349 ("spi: spi-fsl-lpspi: use min_t() to improve code")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20251117030355.1359081-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a UAS device is unplugged during data transfer, there is
a probability of a system panic occurring. The root cause is
an access to an invalid memory address during URB callback handling.
Specifically, this happens when the dma_direct_unmap_sg() function
is called within the usb_hcd_unmap_urb_for_dma() interface, but the
sg->dma_address field is 0 and the sg data structure has already been
freed.
The SCSI driver sends transfer commands by invoking uas_queuecommand_lck()
in uas.c, using the uas_submit_urbs() function to submit requests to USB.
Within the uas_submit_urbs() implementation, three URBs (sense_urb,
data_urb, and cmd_urb) are sequentially submitted. Device removal may
occur at any point during uas_submit_urbs execution, which may result
in URB submission failure. However, some URBs might have been successfully
submitted before the failure, and uas_submit_urbs will return the -ENODEV
error code in this case. The current error handling directly calls
scsi_done(). In the SCSI driver, this eventually triggers scsi_complete()
to invoke scsi_end_request() for releasing the sgtable. The successfully
submitted URBs, when being unlinked to giveback, call
usb_hcd_unmap_urb_for_dma() in hcd.c, leading to exceptions during sg
unmapping operations since the sg data structure has already been freed.
This patch modifies the error condition check in the uas_submit_urbs()
function. When a UAS device is removed but one or more URBs have already
been successfully submitted to USB, it avoids immediately invoking
scsi_done() and save the cmnd to devinfo->cmnd array. If the successfully
submitted URBs is completed before devinfo->resetting being set, then
the scsi_done() function will be called within uas_try_complete() after
all pending URB operations are finalized. Otherwise, the scsi_done()
function will be called within uas_zap_pending(), which is executed after
usb_kill_anchored_urbs().
The error handling only takes effect when uas_queuecommand_lck() calls
uas_submit_urbs() and returns the error value -ENODEV . In this case,
the device is disconnected, and the flow proceeds to uas_disconnect(),
where uas_zap_pending() is invoked to call uas_try_complete().
Fixes: eb2a86ae8c ("USB: UAS: fix disconnect by unplugging a hub")
Cc: stable <stable@kernel.org>
Signed-off-by: Yu Chen <chenyu45@xiaomi.com>
Signed-off-by: Owen Gu <guhuinan@xiaomi.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20251120123336.3328-1-guhuinan@xiaomi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch addresses a race condition caused by unsynchronized
execution of multiple call paths invoking `dwc3_remove_requests()`,
leading to premature freeing of USB requests and subsequent crashes.
Three distinct execution paths interact with `dwc3_remove_requests()`:
Path 1:
Triggered via `dwc3_gadget_reset_interrupt()` during USB reset
handling. The call stack includes:
- `dwc3_ep0_reset_state()`
- `dwc3_ep0_stall_and_restart()`
- `dwc3_ep0_out_start()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 2:
Also initiated from `dwc3_gadget_reset_interrupt()`, but through
`dwc3_stop_active_transfers()`. The call stack includes:
- `dwc3_stop_active_transfers()`
- `dwc3_remove_requests()`
- `dwc3_gadget_del_and_unmap_request()`
Path 3:
Occurs independently during `adb root` execution, which triggers
USB function unbind and bind operations. The sequence includes:
- `gserial_disconnect()`
- `usb_ep_disable()`
- `dwc3_gadget_ep_disable()`
- `dwc3_remove_requests()` with `-ESHUTDOWN` status
Path 3 operates asynchronously and lacks synchronization with Paths
1 and 2. When Path 3 completes, it disables endpoints and frees 'out'
requests. If Paths 1 or 2 are still processing these requests,
accessing freed memory leads to a crash due to use-after-free conditions.
To fix this added check for request completion and skip processing
if already completed and added the request status for ep0 while queue.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Manish Nagar <manish.nagar@oss.qualcomm.com>
Link: https://patch.msgid.link/20251120074435.1983091-1-manish.nagar@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When DbC is disconnected then xhci_dbc_tty_unregister_device()
is called. However if there is any user space process blocked
on write to DbC terminal device then it will never be signalled
and thus stay blocked indifinitely.
This fix adds a tty_vhangup() call in xhci_dbc_tty_unregister_device().
The tty_vhangup() wakes up any blocked writers and causes subsequent
write attempts to DbC terminal device to fail.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Link: https://patch.msgid.link/20251119212910.1245694-1-ukaszb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Discovered by Atuin - Automated Vulnerability Discovery Engine.
new_pba comes from the status packet returned after each write.
A bogus device could report values beyond the block count derived
from info->capacity, letting the driver walk off the end of
pba_to_lba[] and corrupt heap memory.
Reject PBAs that exceed the computed block count and fail the
transfer so we avoid touching out-of-range mapping entries.
Signed-off-by: Tianchu Chen <flynnnchen@tencent.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/B2DC73A3EE1E3A1D+202511161322001664687@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 69896119dc ("MIPS: vdso: Switch to generic storage
implementation") switches to a generic vdso storage, which increases
the number of data pages from 1 to 4. But there is only one page
reserved, which causes segementation faults depending where the VDSO
area is randomized to. To fix this use the same size of reservation
and allocation of the VDSO data pages.
Fixes: 69896119dc ("MIPS: vdso: Switch to generic storage implementation")
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Depending on the particular CPU implementation a TLB shutdown may occur
if multiple matching entries are detected upon the execution of a TLBP
or the TLBWI/TLBWR instructions. Given that we don't know what entries
we have been handed we need to be very careful with the initial TLB
setup and avoid all these instructions.
Therefore read all the TLB entries one by one with the TLBR instruction,
bypassing the content addressing logic, and truncate any large pages in
place so as to avoid a case in the second step where an incoming entry
for a large page at a lower address overlaps with a replacement entry
chosen at another index. Then preinitialize the TLB using addresses
outside our usual unique range and avoiding clashes with any entries
received, before making the usual call to local_flush_tlb_all().
This fixes (at least) R4x00 cores if TLBP hits multiple matching TLB
entries (SGI IP22 PROM for examples sets up all TLBs to the same virtual
address).
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 35ad7e1815 ("MIPS: mm: tlb-r4k: Uniquify TLB entries on init")
Cc: stable@vger.kernel.org
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com> # Boston I6400, M5150 sim
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
GFP_NOWAIT allocation may fail anytime. It needs to be changed to
GFP_NOIO. There's no need to handle an error because mempool_alloc with
GFP_NOIO can't fail.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
As explain in commit fa349e396e ("veth: Fix race with AF_XDP exposing
old or uninitialized descriptors") for veth there is a chance after
napi_complete_done() that another CPU can manage start another NAPI
instance running veth_pool(). For NAPI this is correctly handled as the
napi_schedule_prep() check will prevent multiple instances from getting
scheduled, but for the remaining code in veth_pool() this can run
concurrent with the newly started NAPI instance.
The problem/race is that xdp_clear_return_frame_no_direct() isn't
designed to be nested.
Prior to commit 401cb7dae8 ("net: Reference bpf_redirect_info via
task_struct on PREEMPT_RT.") the temporary BPF net context
bpf_redirect_info was stored per CPU, where this wasn't an issue. Since
this commit the BPF context is stored in 'current' task_struct. When
running veth in threaded-NAPI mode, then the kthread becomes the storage
area. Now a race exists between two concurrent veth_pool() function calls
one exiting NAPI and one running new NAPI, both using the same BPF net
context.
Race is when another CPU gets within the xdp_set_return_frame_no_direct()
section before exiting veth_pool() calls the clear-function
xdp_clear_return_frame_no_direct().
Fixes: 401cb7dae8 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/176356963888.337072.4805242001928705046.stgit@firesoul
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In atm_init(), if atmsvc_init() fails, the code jumps to out_atmpvc_exit
label which incorrectly calls atmsvc_exit() instead of atmpvc_exit().
This results in calling the wrong cleanup function and failing to properly
clean up atmpvc_init().
Fix this by calling atmpvc_exit() in the out_atmpvc_exit error path.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Sayooj K Karun <sayooj@aerlync.com>
Link: https://patch.msgid.link/20251119085747.67139-1-sayooj@aerlync.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The change eed467b517 ("Bluetooth: fix passkey uninitialized when used")
introduced a goto that bypasses the creation of temporary mackey and ltk
which are later used by the likes of DHKey Check step.
Later ffee202a78 ("Bluetooth: Always request for user confirmation for
Just Works (LE SC)") which means confirm_hint is always set in case
JUST_WORKS so the branch checking for an existing LTK becomes pointless
as confirm_hint will always be set, so this just merge both cases of
malicious or legitimate devices to be confirmed before continuing with the
pairing procedure.
Link: https://github.com/bluez/bluez/issues/1622
Fixes: eed467b517 ("Bluetooth: fix passkey uninitialized when used")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In btusb_mtk_setup(), we set `btmtk_data->isopkt_intf` to:
usb_ifnum_to_if(data->udev, MTK_ISO_IFNUM)
That function can return NULL in some cases. Even when it returns
NULL, though, we still go on to call btusb_mtk_claim_iso_intf().
As of commit e9087e8288 ("Bluetooth: btusb: mediatek: Add locks for
usb_driver_claim_interface()"), calling btusb_mtk_claim_iso_intf()
when `btmtk_data->isopkt_intf` is NULL will cause a crash because
we'll end up passing a bad pointer to device_lock(). Prior to that
commit we'd pass the NULL pointer directly to
usb_driver_claim_interface() which would detect it and return an
error, which was handled.
Resolve the crash in btusb_mtk_claim_iso_intf() by adding a NULL check
at the start of the function. This makes the code handle a NULL
`btmtk_data->isopkt_intf` the same way it did before the problematic
commit (just with a slight change to the error message printed).
Reported-by: IncogCyberpunk <incogcyberpunk@proton.me>
Closes: http://lore.kernel.org/r/a380d061-479e-4713-bddd-1d6571ca7e86@leemhuis.info
Fixes: e9087e8288 ("Bluetooth: btusb: mediatek: Add locks for usb_driver_claim_interface()")
Cc: stable@vger.kernel.org
Tested-by: IncogCyberpunk <incogcyberpunk@proton.me>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The hdev lock/lookup/unlock/use pattern in the packet RX path doesn't
ensure hci_conn* is not concurrently modified/deleted. This locking
appears to be leftover from before conn_hash started using RCU
commit bf4c632524 ("Bluetooth: convert conn hash to RCU")
and not clear if it had purpose since then.
Currently, there are code paths that delete hci_conn* from elsewhere
than the ordered hdev->workqueue where the RX work runs in. E.g.
commit 5af1f84ed1 ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync")
introduced some of these, and there probably were a few others before
it. It's better to do the locking so that even if these run
concurrently no UAF is possible.
Move the lookup of hci_conn and associated socket-specific conn to
protocol recv handlers, and do them within a single critical section
to cover hci_conn* usage and lookup.
syzkaller has reported a crash that appears to be this issue:
[Task hdev->workqueue] [Task 2]
hci_disconnect_all_sync
l2cap_recv_acldata(hcon)
hci_conn_get(hcon)
hci_abort_conn_sync(hcon)
hci_dev_lock
hci_dev_lock
hci_conn_del(hcon)
v-------------------------------- hci_dev_unlock
hci_conn_put(hcon)
conn = hcon->l2cap_data (UAF)
Fixes: 5af1f84ed1 ("Bluetooth: hci_sync: Fix UAF on hci_abort_conn_sync")
Reported-by: syzbot+d32d77220b92eddd89ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d32d77220b92eddd89ad
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is a potential race condition between sock bind and socket write
iter. bind may free the same cmd via mgmt_pending before write iter sends
the cmd, just as syzbot reported in UAF[1].
Here we use hci_dev_lock to synchronize the two, thereby avoiding the
UAF mentioned in [1].
[1]
syzbot reported:
BUG: KASAN: slab-use-after-free in mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316
Read of size 8 at addr ffff888077164818 by task syz.0.17/5989
Call Trace:
mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316
set_link_security+0x5c2/0x710 net/bluetooth/mgmt.c:1918
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
sock_write_iter+0x279/0x360 net/socket.c:1195
Allocated by task 5989:
mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296
set_link_security+0x557/0x710 net/bluetooth/mgmt.c:1910
hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719
hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
sock_write_iter+0x279/0x360 net/socket.c:1195
Freed by task 5991:
mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline]
mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257
mgmt_index_removed+0x112/0x2f0 net/bluetooth/mgmt.c:9477
hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314
Fixes: 6fe26f694c ("Bluetooth: MGMT: Protect mgmt_pending list with its own lock")
Reported-by: syzbot+9aa47cd4633a3cf92a80@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9aa47cd4633a3cf92a80
Tested-by: syzbot+9aa47cd4633a3cf92a80@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI_OP_NOP means no command was actually sent so there is no point in
triggering cmd_timer which may cause a hdev->reset in the process since
it is assumed that the controller is stuck processing a command.
Fixes: e2d471b780 ("Bluetooth: ISO: Fix not using SID from adv report")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Along with the renaming from task_security_struct to cred_security_struct,
rename the local variables to "crsec" from "tsec". This both fits with
existing conventions and helps distinguish between task and cred related
variables.
No functional changes.
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The avdcache is meant to be per-task; move it to a new
task_security_struct that is duplicated per-task.
Cc: stable@vger.kernel.org
Fixes: 5d7ddc59b3 ("selinux: reduce path walk overhead")
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: line length fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Before Linux had cred structures, the SELinux task_security_struct was
per-task and although the structure was switched to being per-cred
long ago, the name was never updated. This change renames it to
cred_security_struct to avoid confusion and pave the way for the
introduction of an actual per-task security structure for SELinux. No
functional change.
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
An empty flush bio can have arbitrary bi_sector. The commit 2b1c6d7a89
introduced a regression that device mapper would fail an empty flush bio
with -EIO if the sector pointed beyond the end of the device.
The commit introduced an optimization, that optimization would pass
flushes to __split_and_process_bio and __split_and_process_bio is not
prepared to handle empty bios. Fix this bug by passing only non-empty
flushes to __split_and_process_bio - non-empty flushes must have valid
bi_sector. Empty bios will go through __send_empty_flush, as they did
before the optimization.
This problem can be reproduced by running the lvm2 test:
make check_local T=lvconvert-thin.sh LVM_TEST_PREFER_BRD=0
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 2b1c6d7a89 ("dm: optimize REQ_PREFLUSH with data when using the linear target")
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
A crash was observed when the sched_ext selftests runner was
terminated with Ctrl+\ while test 15 was running:
NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0
LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0
Call Trace:
scx_enable.constprop.0+0x32c/0x12b0 (unreliable)
bpf_struct_ops_link_create+0x18c/0x22c
__sys_bpf+0x23f8/0x3044
sys_bpf+0x2c/0x6c
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
kthread_run_worker() returns an ERR_PTR() on failure rather than NULL,
but the current code in scx_alloc_and_add_sched() only checks for a NULL
helper. Incase of failure on SIGQUIT, the error is not handled in
scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an
error pointer.
Error handling is fixed in scx_alloc_and_add_sched() to propagate
PTR_ERR() into ret, so that scx_enable() jumps to the existing error
path, avoiding random dereference on failure.
Fixes: bff3b5aec1 ("sched_ext: Move disable machinery into scx_sched")
Cc: stable@vger.kernel.org # v6.16+
Reported-and-tested-by: Samir Mulani <samir@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If timestamp retriving needs to be retried and the local list of
SKB's already has entries, then it's spliced back into the socket
queue. However, the arguments for the splice helper are transposed,
causing exactly the wrong direction of splicing into the on-stack
list. Fix that up.
Cc: stable@vger.kernel.org
Reported-by: Google Big Sleep <big-sleep-vuln-reports+bigsleep-462435176@google.com>
Fixes: 9e4ed359b8 ("io_uring/netcmd: add tx timestamping cmd support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix a regression introduced during the 6.16 development cycle that
may cause runtime PM to be enabled by mistake for devices that do not
support it (which may lead to some serious trouble) if there is a
system wakeup event during the "late suspend" phase of system suspend.
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkfS9ASHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1cKQH/RbZZcC/4q3lUgMfk0+C/6Y+4Nv7MxDR
jT4fxYinFVSAVpcAIomB838C4PBuIilNKu2JUR62Rw2Pa5PSvVMZcpIHWMdb/QXn
7V5f0CQIGeWdzOBuXlzMWzko6D3CBBBHQMOBPFWD1w5DeT04DRDBAyqW+Osb6NEU
aywA+qFkSSg+m+IzkNZGiIgKW9y6oponKetGTuB5b4C0c6WhMg9abc+isKC4yLXY
NufuHokqSRn19RoKpzz1IBnHDE6yVoy9/O9QNY8yfKvLOr8MCRN6rbPwbMF3tcSk
RQ+jASuIlEgExe0fsP+K1KTPh++EUOottirM9b1B6rj4UwHN+Yq95dk=
=7MZg
-----END PGP SIGNATURE-----
Merge tag 'pm-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a regression introduced during the 6.16 development cycle that may
cause runtime PM to be enabled by mistake for devices that do not
support it (which may lead to some serious trouble) if there is a
system wakeup event during the "late suspend" phase of system suspend"
* tag 'pm-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: core: Fix runtime PM enabling in device_resume_early()
This fixes EINJV2 support introduced during the 6.17 cycle by unbreaking
the initialization broken by a previous attempted fix, adding sanity
checks for data coming from the platform firmware, and updating the code
to handle injecting legacy error types on an EINJV2 capable systems
properly (Tony Luck).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkfTbkSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1sW0H/1hrZXwWMnevTKSrjEgcfCu7Bj2JHTNl
DqkjMOgU4uX+F6cO/Vitfs3j2N4FM6DCQpEvXBFso8jPkUjp0Ekw/zYoePcecdTd
JPD/IIOcJJBrmbHMkEHwHNiaXEqNxKlvAYvdsVLGPZxut+ysiOqYYRjtYDwSFcjr
F9FliIDn0HUDBYwV3ItiIZupUjkmficmiLO7AFAZddbugtCSEcdtQw207iq5NSN3
zfdVyGv0DOVwub3KEcRQOmMr8orUho5Z62/ms4RUl6b8jpIo8S57Yoxp9/J9cfDt
1eU2q8XnkKy/GbhEGehvRt3D/pTUUGdrgfEM40FUgROR1hI+b5MFE1w=
=NauX
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes EINJV2 support introduced during the 6.17 cycle by
unbreaking the initialization broken by a previous attempted fix,
adding sanity checks for data coming from the platform firmware, and
updating the code to handle injecting legacy error types on an EINJV2
capable systems properly (Tony Luck)"
* tag 'acpi-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: APEI: EINJ: Fix EINJV2 initialization and injection
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support
The following is an automated shortlog grouped by driver:
acer-wmi:
- Ignore backlight event
alienware-wmi-wmax:
- Add AWCC support to Alienware 16 Aurora
- Add support for the whole "G" family
- Add support for the whole "M" family
- Add support for the whole "X" family
- Drop redundant DMI entries
- Fix "Alienware m16 R1 AMD" quirk order
amd: pmc:
- Add Lenovo Legion Go 2 to pmc quirk list
amd/pmc:
- Add spurious_8042 to Xbox Ally
- Add support for Van Gogh SoC
hp-wmi:
- Add Omen 16-wf1xxx fan support
- Add Omen MAX 16-ah0xx fan support and thermal profile
- mark Victus 16-r0 and 16-s0 for victus_s fan and thermal profile support
huawei-wmi:
- add keys for HONOR models
intel/hid:
- Add Nova Lake support
intel/speed_select_if:
- Convert PCIBIOS_* return codes to errnos
intel-uncore-freq:
- Add additional client processors
- fix all header kernel-doc warnings
ISST: isst_if.h:
- fix all kernel-doc warnings
msi-wmi-platform:
- Fix typo in WMI GUID
- Only load on MSI devices
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaR9GsgAKCRBZrE9hU+XO
MU2qAQD8C75ebO/ltd9LZ4oTzfe0P6kmV+28z0D97tFsFmt0hwEA/fZHU/bV1+3c
+gRnoLCl4yPh214OgWnmsciPhW3iyAM=
=AtKC
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=89Xl
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
tk_aux_sysfs_init() returns immediately on error during the auxiliary clock
initialization loop without cleaning up previously allocated kobjects and
sysfs groups.
If kobject_create_and_add() or sysfs_create_group() fails during loop
iteration, the parent kobjects (tko and auxo) and any previously created
child kobjects are leaked.
Fix this by adding proper error handling with goto labels to ensure all
allocated resources are cleaned up on failure. kobject_put() on the
parent kobjects will handle cleanup of their children.
Fixes: 7b95663a3d ("timekeeping: Provide interface to control auxiliary clocks")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251120150213.246777-1-mrout@redhat.com
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/
[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/
[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251119-vsock-interrupted-connect-v2-1-70734cf1233f@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
be_insert_vlan_in_pkt() is called with the wrb_params argument being NULL
at be_send_pkt_to_bmc() call site. This may lead to dereferencing a NULL
pointer when processing a workaround for specific packet, as commit
bc0c3405ab ("be2net: fix a Tx stall bug caused by a specific ipv6
packet") states.
The correct way would be to pass the wrb_params from be_xmit().
Fixes: 760c295e0e ("be2net: Support for OS2BMC.")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20251119105015.194501-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For Security locked drives (drives that have Security enabled, and have
not been Security unlocked by boot firmware), the automatic partition
scanning will result in the user being spammed with errors such as:
ata5.00: failed command: READ DMA
ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 7 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata5.00: status: { DRDY ERR }
ata5.00: error: { ABRT }
sd 4:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
sd 4:0:0:0: [sda] tag#7 Sense Key : Aborted Command [current]
sd 4:0:0:0: [sda] tag#7 Add. Sense: No additional sense information
during boot, because most commands except for IDENTIFY will be aborted by
a Security locked drive.
For a Security locked drive, set capacity to zero, so that no automatic
partition scanning will happen.
If the user later unlocks the drive using e.g. hdparm, the close() by the
user space application should trigger a revalidation of the drive.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Commit cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error() status
handling") fixed ata_to_sense_error() to properly generate sense key
ABORTED COMMAND (without any additional sense code), instead of the
previous bogus sense key ILLEGAL REQUEST with the additional sense code
UNALIGNED WRITE COMMAND, for a failed command.
However, this broke suspend for Security locked drives (drives that have
Security enabled, and have not been Security unlocked by boot firmware).
The reason for this is that the SCSI disk driver, for the Synchronize
Cache command only, treats any sense data with sense key ILLEGAL REQUEST
as a successful command (regardless of ASC / ASCQ).
After commit cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error()
status handling") the code that treats any sense data with sense key
ILLEGAL REQUEST as a successful command is no longer applicable, so the
command fails, which causes the system suspend to be aborted:
sd 1:0:0:0: PM: dpm_run_callback(): scsi_bus_suspend returns -5
sd 1:0:0:0: PM: failed to suspend async: error -5
PM: Some devices failed to suspend, or early wake event detected
To make suspend work once again, for a Security locked device only,
return sense data LOGICAL UNIT ACCESS NOT AUTHORIZED, the actual sense
data which a real SCSI device would have returned if locked.
The SCSI disk driver treats this sense data as a successful command.
Cc: stable@vger.kernel.org
Reported-by: Ilia Baryshnikov <qwelias@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220704
Fixes: cf3fc03762 ("ata: libata-scsi: Fix ata_to_sense_error() status handling")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
