The current code allows rel[j] to access one element past the end of the
relocation section. Simplify to num_relocations which is equivalent to
the existing size expression.
Fixes: 080c4324fa ("riscv: optimize ELF relocation function in riscv")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409171526.862481-1-samuel.holland@sifive.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
The /proc/iomem represents the kernel's memory map. Regions marked
with "Reserved" tells the user that the range should not be tampered
with. Kexec-tools, when using the older kexec_load syscall relies on
the "Reserved" regions to build the memory segments, that will be the
target of the new kexec'd kernel.
The RISC-V port tries to expose all reserved regions to userland, but
some regions were not properly exposed: Regions that resided in both
the "regular" and reserved memory block, e.g. the EFI Memory Map. A
missing entry could result in reserved memory being overwritten.
It turns out, that arm64, and loongarch had a similar issue a while
back:
commit d91680e687 ("arm64: Fix /proc/iomem for reserved but not memory regions")
commit 50d7ba36b9 ("arm64: export memblock_reserve()d regions via /proc/iomem")
Similar to the other ports, resolve the issue by splitting the regions
in an arch initcall, since we need a working allocator.
Fixes: ffe0e52612 ("RISC-V: Improve init_resources()")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250409182129.634415-1-bjorn@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Add entry for i.MX SCMI extensions and myself as maintainer
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-7-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The i.MX95 System manager exports SCMI CPU protocol for linux to manage
cpu cores. The driver is to use the cpu Protocol interface to
start, stop a cpu cores (eg, M7).
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-6-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The i.MX95 System manager exports SCMI LMM protocol for linux to manage
Logical Machines. The driver is to use the LMM Protocol interface to
boot, shutdown a LM.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250408-imx-lmm-cpu-v4-5-4c5f4a456e49@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The metadata saved in the ADS is read by GuC when it's initialized.
Saving the addresses to the LRCs when they are populated is too late as
GuC will keep using the old ones.
This was causing GuC to use the RCS LRC for any engine class. It's not a
big problem on a Linux-only scenario since the they are used by GuC only
on media engines when the watchdog is triggered. However, in a
virtualization scenario with Windows as the VF, it causes the wrong LRCs
to be loaded as the watchdog is used for all engines.
Fix it by letting guc_golden_lrc_init() initialize the metadata, like
other *_init() functions, and later guc_golden_lrc_populate() to copy
the LRCs to the right places. The former is called before the second GuC
load, while the latter is called after LRCs have been recorded.
Cc: Chee Yin Wong <chee.yin.wong@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Chee Yin Wong <chee.yin.wong@intel.com>
Link: https://lore.kernel.org/r/20250409-fix-guc-ads-v1-1-494135f7a5d0@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
As more tests are added, the exit function gets longer than it should
be. Condense the un-register calls into a for loop to make it easier to
add/remove tests.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
As we add more test functions in lib/tests_sysctl the main test function
(test_sysctl_init) grows. Condense the logic to make it easier to
add/remove tests.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Add a sysctl test that uses the new u8 test ctl files in a created by
the sysctl test module. Check that the u8 proc file that is valid is
created and that there are two messages in dmesg for the files that were
out of range.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
If the test added in commit b5ffbd1396 ("sysctl: move the extra1/2
boundary check of u8 to sysctl_check_table_array") is run as a module, a
lingering reference to the module is left behind, and a 'sysctl -a'
leads to a panic.
To reproduce
CONFIG_KUNIT=y
CONFIG_SYSCTL_KUNIT_TEST=m
Then run these commands:
modprobe sysctl-test
rmmod sysctl-test
sysctl -a
The panic varies but generally looks something like this:
BUG: unable to handle page fault for address: ffffa4571c0c7db4
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 100351067 PMD 114f5e067 PTE 0
Oops: Oops: 0000 [#1] SMP NOPTI
... ... ...
RIP: 0010:proc_sys_readdir+0x166/0x2c0
... ... ...
Call Trace:
<TASK>
iterate_dir+0x6e/0x140
__se_sys_getdents+0x6e/0x100
do_syscall_64+0x70/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Move the test to lib/test_sysctl.c where the registration reference is
handled on module exit
Fixes: b5ffbd1396 ("sysctl: move the extra1/2 boundary check of u8 to sysctl_check_table_array")
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
The `FwFunc` struct contains an function with a char pointer argument,
for which a `*const u8` pointer was used. This is not really the
"proper" type for this, so use a `*const kernel::ffi::c_char` pointer
instead.
This has no real functionality changes, since now `kernel::ffi::c_char`
(which bindgen uses for `char`) is now a type alias to `u8` anyways,
but before commit 1bae8729e5 ("rust: map `long` to `isize` and `char`
to `u8`") the concrete type of `kernel::ffi::c_char` depended on the
architecture (However all supported architectures at the time mapped to
`i8`).
This caused problems on the v6.13 tag when building for 32 bit arm (with
my patches), since back then `*const i8` was used in the function
argument and the function that bindgen generated used
`*const core::ffi::c_char` which Rust mapped to `*const u8` on 32 bit
arm. The stable v6.13.y branch does not have this issue since commit
1bae8729e5 ("rust: map `long` to `isize` and `char` to `u8`") was
backported.
This caused the following build error:
```
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:20:4
|
20 | Self(bindings::request_firmware)
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item
| |
| arguments to this function are incorrect
|
= note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _`
found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {request_firmware}`
note: tuple struct defined here
--> rust/kernel/firmware.rs:14:8
|
14 | struct FwFunc(
| ^^^^^^
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:24:14
|
24 | Self(bindings::firmware_request_nowarn)
| ---- ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ expected fn pointer, found fn item
| |
| arguments to this function are incorrect
|
= note: expected fn pointer `unsafe extern "C" fn(_, *const i8, _) -> _`
found fn item `unsafe extern "C" fn(_, *const u8, _) -> _ {firmware_request_nowarn}`
note: tuple struct defined here
--> rust/kernel/firmware.rs:14:8
|
14 | struct FwFunc(
| ^^^^^^
error[E0308]: mismatched types
--> rust/kernel/firmware.rs:64:45
|
64 | let ret = unsafe { func.0(pfw as _, name.as_char_ptr(), dev.as_raw()) };
| ------ ^^^^^^^^^^^^^^^^^^ expected `*const i8`, found `*const u8`
| |
| arguments to this function are incorrect
|
= note: expected raw pointer `*const i8`
found raw pointer `*const u8`
error: aborting due to 3 previous errors
```
Fixes: de6582833d ("rust: add firmware abstractions")
Cc: stable@vger.kernel.org
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250413-rust_arm_fix_fw_abstaction-v3-1-8dd7c0bbcd47@gmail.com
[ Add firmware prefix to commit subject. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Bjorn, Krzysztof and I agreed that I will maintain the Rust PCI code.
Therefore, create a new entry in the MAINTAINERS file.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250407133059.164042-1-dakr@kernel.org
[ Align Krzysztof's email address. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In order to work properly PRP requires slave1 and slave2 to share the
same MAC address. To ease the configuration process on userspace tools,
sync the slave2 MAC address with slave1. In addition, when deleting the
port from the list, restore the original MAC address.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
fs_name() has @index as unsigned int, so there is underflow risk for
operation '@index--'.
Fix by breaking the for loop when '@index == 0' which is also more proper
than '@index <= 0' for unsigned integer comparison.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/20250410-fix_fs-v1-1-7c14ccc8ebaa@quicinc.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
There is no mount option with pattern "...,=key_or_value,...", so the if
condition '(value == key)' in while loop of vfs_parse_monolithic_sep() is
is unlikely true.
Mark the condition with unlikely() to improve both performance and
readability.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/20250410-fix_fs-v1-5-7c14ccc8ebaa@quicinc.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
For fs_validate_description(), its comments easily mislead reader that
the function will search array @desc for duplicated entries with name
specified by parameter @name, but @name is not used for search actually.
Fix by marking name as owner's name of these parameter specifications.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Current graph_util_parse_dai() has 2 issue for dlc->xxx handling.
1) dlc->xxx might be filled if snd_soc_get_dai_via_args() (A) works.
In such case it will fill dlc->xxx first (B), and detect error
after that (C). We need to fill dlc->xxx in success case only.
(A) dai = snd_soc_get_dai_via_args(&args);
if (dai) {
ret = -ENOMEM;
^ dlc->of_node = ...
(B) dlc->dai_name = ...
v dlc->dai_args = ...
(C) if (!dlc->dai_args)
goto end;
...
}
2) graph_util_parse_dai() itself has 2 patterns (X)(Y) to fill dlc->xxx.
Both case, we need to call of_node_put(node) (Z) in error case, but we
are calling it only in (Y) case.
int graph_util_parse_dai(...)
{
...
dai = snd_soc_get_dai_via_args(&args);
if (dai) {
...
^ dlc->of_node = ...
(X) dlc->dai_name = ...
v dlc->dai_args = ...
...
}
...
(Y) ret = snd_soc_get_dlc(&args, dlc);
if (ret < 0) {
(Z) of_node_put(node);
...
}
...
}
This patch fixup both case. Make it easy to understand, update
lavel "end" to "err", too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87fribr2ns.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set use_gpio_descriptors to true so that GPIOs can be used for chip
select in accordance with the DT binding.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250410115303.5150-1-mans@mansr.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the PF's debugfs files (and their implementations) are
based on the GT hierarchy even if files are related to GGTT or
LMEM data, that are related to the tile.
While we could reach the tile data from any GT, to avoid potential
misuse, some functions allow to be used on the primary GT only,
and may use asserts to enforce that.
In our case, the following assert could be seen when reading the
/sys/kernel/debug/dri/0000:00:02.0/gt1/pf/ggtt_available
[ ] xe 0000:00:02.0: [drm] Assertion `!xe_gt_is_media_type(gt)` failed!
[ ] WARNING: CPU: 4 PID: 10609 at drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c:379 pf_get_spare_ggtt+0x256/0x4e0 [xe]
[ ] RIP: 0010:pf_get_spare_ggtt+0x256/0x4e0 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] xe_gt_sriov_pf_config_print_available_ggtt+0xb7/0x480 [xe]
[ ] ? __memcg_slab_post_alloc_hook+0x12f/0x3f0
[ ] xe_gt_debugfs_simple_show+0x7b/0xb0 [xe]
[ ] ? __pfx___drm_printfn_seq_file+0x10/0x10
[ ] ? __pfx___drm_puts_seq_file+0x10/0x10
[ ] seq_read_iter+0x139/0x4e0
[ ] seq_read+0x11d/0x160
[ ] full_proxy_read+0x6b/0xb0
[ ] vfs_read+0xfa/0x390
Fix that by moving GGTT/LMEM debugfs attributes to separate lists
and register them only when applicable (on primary GT, on DGFX).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Reviewed-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250411193030.1865-1-michal.wajdeczko@intel.com
Merge series from Keguang Zhang <keguang.zhang@gmail.com>:
Add the driver and dt-binding document for Loongson-1 AC97.
Add the dt-binding document for Realtek ALC203 Codec.
Add DT support for the AC97 generic codec driver.
Merge series from Bartosz Golaszewski <brgl@bgdev.pl>:
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. We're in the process of
converting all GPIO drivers to using the new API. This series converts
all ASoC GPIO controllers.
Merge series from James Calligeros <jcalligeros99@gmail.com>:
This series introduces a number of changes to the drivers for
the Texas Instruments TAS2764 and TAS2770 amplifiers in order to
introduce (and improve in the case of TAS2770) support for the
variants of these amps found in Apple Silicon Macs.
Apple's variant of TAS2764 is known as SN012776, and as always with
Apple is a subtly incompatible variant with a number of quirks. It
is not publicly available. The TAS2770 variant is known as TAS5770L,
and does not require incompatible handling.
Much as with the Cirrus codec patches, I do not
expect that we will get any official acknowledgement that these parts
exist from TI, however I would be delighted to be proven wrong.
This series has been living in the downstream Asahi kernel tree[1]
for over two years, and has been tested by many thousands of users
by this point[2].
v4 drops the TDM idle TX slot behaviour patches. I experimented with
the API discussed in v3, however this did not work on any of the machines
I tested it with. More tweaking is probably needed.
[1] https://github.com/AsahiLinux/linux/tree/asahi-wip
[2] https://stats.asahilinux.org/
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This series fixes the KConfig for cs_dsp and cs-amp-lib tests so that
CONFIG_KUNIT_ALL_TESTS doesn't cause them to add modules to the build.
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250414021950.3755819-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
A codec endpoint may not be used. We could check the present SDCA
functions to know if the endpoint is used or not. Skip the endpoint
which is not used.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-12-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently asoc_sdw_get_codec_name will return codec_info->codec_name if
it is set. However, in some case we need the sdw codec name no matter if
codec_info->codec_name is set or not.
_asoc_sdw_get_codec_name() will be used in the follow up commit.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-11-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio configs with multi-function SDCA codecs can use the
sof_sdw_get_tplg_files ops to get function topologies dynamically.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio configs with multi-function SDCA codecs can use the
sof_sdw_get_tplg_files ops to get function topologies dynamically.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio configs with multi-function SDCA codecs can use the
sof_sdw_get_tplg_files ops to get function topologies dynamically.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio configs with multi-function SDCA codecs can use the
sof_sdw_get_tplg_files ops to get function topologies dynamically.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sof_sdw_get_tplg_files ops to get sub-topology file names for the
sof_sdw card.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we always use single topology file to describe the widgets.
However, with SDCA, we want to be able to load sub-topologies based on
the supported device functions.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We always use a single topology that contains all PCM devices belonging
to a machine configuration.
However, with SDCA, we want to be able to load function topologies based
on the supported device functions. This change is in preparation for
loading those function topologies.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to convert the return value of snd_soc_tplg_component_load().
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation to handle tuples from multiple topologies, duplicate the
tuple string value by allocating memory for it.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20250414063239.85200-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add support for the MediaTek Dimensity 1200 (MT6893) SoC's DVFSRC
v2 hardware: the only difference between this and the only other
supported DVFSRCv2 SoC (MT8195) is the VCore-DRAM OPP array.
Link: https://lore.kernel.org/r/20250410144019.475930-6-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Rename the MT8183 and MT8195 bandwidth constraints data structure
to, respectively, dvfsrc_bw_constr_v1 and dvfsrc_bw_constr_v2, as
the actual constraints are depending on the DVFSRC version rather
than on the SoC.
While at it, to prepare for adding a new SoC, also move the two
structures at the start of the platform data code section.
Link: https://lore.kernel.org/r/20250410144019.475930-5-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible for the MediaTek Dimensity 1200 (MT6893) SoC's
DVFSRC hardware, introducing capability to communicate with it.
Even though this SoC uses the same basic version of the DVFSRC
IP as MT8195, the vcore-vdram parameters are different, hence
no fallback compatibility is possible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250410144019.475930-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The dpi-default-pins overwrittes the same called node, defined in
mt8186-corsola.dtsi with the wrong set of pins, so remove
it from mt8186-corsola-starmie.dtsi as the first one is correct and
sufficient.
In addition, remove dpi-func-pins node from mt8186-corsola-starmie.dtsi,
as it is not used anywhere and also defines the same set of pins as
dpi-default-pins node already present in mt8186-corsola.dtsi.
Verifeid above with Corsola/Starmie device, by connecting external screen
with usb-c -> hdmi adapter.
Signed-off-by: Łukasz Majczak <lmajczak@google.com>
Link: https://lore.kernel.org/r/20250328121300.2612942-1-lmajczak@google.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
By hardware, the first and second core of the video decoder IP
need the VDEC_SOC to be powered up in order to be able to be
accessed (both internally, by firmware, and externally, by the
kernel).
Similarly, for the video encoder IP, the second core needs the
first core to be powered up in order to be accessible.
Fix that by reparenting the VDEC1/2 power domains to be children
of VDEC0 (VDEC_SOC), and the VENC1 to be a child of VENC0.
Fixes: 2b515194bf ("arm64: dts: mt8195: Add power domains controller")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250402090615.25871-3-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Rename pcie pinctrl definition to fix the following dtbs_check error
for mt8370-genio-510-evk and mt8390-genio-700-evk devicetree files:
```
pinctrl@10005000: 'pcie-default' does not match any of the regexes:
'-pins$', 'pinctrl-[0-9]+'
```
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250403-mt8390-genio-common-fix-pcie-dtbs-check-error-v1-1-70d11fc1482e@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Set the scp firmware name to the default location.
Fixes: f2b543a191 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250404-mt8395-scp-fw-v1-2-bb8f20cd399d@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Set the scp firmware name to the default location.
Fixes: 96564b1e2e ("arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250404-mt8395-scp-fw-v1-1-bb8f20cd399d@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
