Schematics mention a 24cs64 on the bus, but I definitely have only a
24c64. So, it is only mentioned as a comment.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-9-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
To match the documentation and schematics, they are numbered from 1 and
not from 0.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-8-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Share efidrm's and vesadrm's validation of struct screen_info in
shared helpers. Update the drivers.
Most validation helpers test individual values against limits and
can be shared as they are. For color formats, a common helper looks
up the correct DRM format info from a driver-provided list of color
formats.
These screen_info helpers are only available if CONFIG_SCREEN_INFO
has been selected, as done by efidrm and vesadrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-4-tzimmermann@suse.de
Provide sysfb helpers for validating framebuffer integer values
against limits. Update drivers. If a driver did not specify a limit
for a certain value, use INT_MAX.
v2:
- declare module information near EOF (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-3-tzimmermann@suse.de
Split drm_sysfb_helper.c into two source files. There's now one
source file for the mode-setting pipeline and one source file for
module meta data. Prepares for adding additional source code to
sysfb helpers.
v2:
- fix typo in commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250410083834.10810-2-tzimmermann@suse.de
The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this
configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb.
It adds support for the 2 additional switch ports (port C and D) that are
available on that board.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[Thomas: move the DTS to the Renesas directory, declare the PHY LEDs]
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/20250324-rzn1d400-eb-v4-1-d7ebbbad1918@bootlin.com
[wsa: Correct LAN LED nodes]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250411095425.1842-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Missed this UML wrapper in the rename.
Fixes: 6e4955a9d7 ("x86/alternatives: Rename 'text_poke_sync()' to 'smp_text_poke_sync_each_cpu()'")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/202504141003.kc69fVoj-lkp@intel.com
- There's no need for a newline after the SPDX line
- But there's a need for one before the closing header guard.
Collect AMD specific platform header files in <asm/amd/*.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Carlos Bilbao <carlos.bilbao@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Link: https://lore.kernel.org/r/20250413084144.3746608-6-mingo@kernel.org
Handle typeof_unqual, __typeof_unqual and __typeof_unqual__ keywords
using TYPEOF_KEYW token in the same way as typeof keyword.
Also ignore x86 __seg_fs and __seg_gs named address space qualifiers
using X86_SEG_KEYW token in the same way as const, volatile or
restrict qualifiers.
Fixes: ac053946f5 ("compiler.h: introduce TYPEOF_UNQUAL() macro")
Closes: https://lore.kernel.org/lkml/81a25a60-de78-43fb-b56a-131151e1c035@molgen.mpg.de/
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20250413220749.270704-1-ubizjak@gmail.com
Instead of setting bit 1 (USI_OPTION_CLKSTOP_ON) during USI unconfiguring,
all the other bits in the USI_OPTION register get inverted, which
should not happen as that means the clock will keep getting provided
to the USI IP. Remove the unnecessary tilde.
Fixes: 11e77776b5 ("soc: samsung: usi: add a routine for unconfiguring the ip")
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20250413163755.788907-1-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
A few uses of 'fps' snuck in, which is rather confusing
(to me) as it suggests frames-per-second. ;-)
Rename them to the canonical 'fpstate' name.
No change in functionality.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-9-mingo@kernel.org
init_task's FPU state initialization was a bit of a hack:
__x86_init_fpu_begin = .;
. = __x86_init_fpu_begin + 128*PAGE_SIZE;
__x86_init_fpu_end = .;
But the init task isn't supposed to be using the FPU context
in any case, so remove the hack and add in some debug warnings.
As Linus noted in the discussion, the init task (and other
PF_KTHREAD tasks) *can* use the FPU via kernel_fpu_begin()/_end(),
but they don't need the context area because their FPU use is not
preemptible or reentrant, and they don't return to user-space.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250409211127.3544993-8-mingo@kernel.org
fpu__drop() and arch_release_task_struct() calls x86_task_fpu()
unconditionally, while the FPU context area will not be present
if it's the init task, and should not be in use when it's some
other type of kthread.
Return early for PF_KTHREAD or PF_USER_WORKER tasks. The debug
warning in x86_task_fpu() will catch any kthreads attempting to
use the FPU save area.
Fixed-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-7-mingo@kernel.org
This encapsulates the fpu__drop() functionality better, and it
will also enable other changes that want to check a task for
PF_KTHREAD before calling x86_task_fpu().
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-6-mingo@kernel.org
As suggested by Oleg, remove the thread::fpu pointer, as we can
calculate it via x86_task_fpu() at compile-time.
This improves code generation a bit:
kepler:~/tip> size vmlinux.before vmlinux.after
text data bss dec hex filename
26475405 10435342 1740804 38651551 24dc69f vmlinux.before
26475339 10959630 1216516 38651485 24dc65d vmlinux.after
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250409211127.3544993-5-mingo@kernel.org
Turn thread.fpu into a pointer. Since most FPU code internals work by passing
around the FPU pointer already, the code generation impact is small.
This allows us to remove the old kludge of task_struct being variable size:
struct task_struct {
...
/*
* New fields for task_struct should be added above here, so that
* they are included in the randomized portion of task_struct.
*/
randomized_struct_fields_end
/* CPU-specific state of this task: */
struct thread_struct thread;
/*
* WARNING: on x86, 'thread_struct' contains a variable-sized
* structure. It *MUST* be at the end of 'task_struct'.
*
* Do not put anything below here!
*/
};
... which creates a number of problems, such as requiring thread_struct to be
the last member of the struct - not allowing it to be struct-randomized, etc.
But the primary motivation is to allow the decoupling of task_struct from
hardware details (<asm/processor.h> in particular), and to eventually allow
the per-task infrastructure:
DECLARE_PER_TASK(type, name);
...
per_task(current, name) = val;
... which requires task_struct to be a constant size struct.
The fpu_thread_struct_whitelist() quirk to hardened usercopy can be removed,
now that the FPU structure is not embedded in the task struct anymore, which
reduces text footprint a bit.
Fixed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-4-mingo@kernel.org
This will make the removal of the task_struct::thread.fpu array
easier.
No change in functionality - code generated before and after this
commit is identical on x86-defconfig:
kepler:~/tip> diff -up vmlinux.before.asm vmlinux.after.asm
kepler:~/tip>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250409211127.3544993-3-mingo@kernel.org
The per-task FPU context/save area is allocated right
next to task_struct, currently in a variable-size
array via task_struct::thread.fpu[], but we plan to
fully hide it from the C type scope.
Introduce the x86_task_fpu() accessor that gets to the
FPU context pointer explicitly from the task pointer.
Right now this is a simple (task)->thread.fpu wrapper.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409211127.3544993-2-mingo@kernel.org
== Background ==
As feature positions in the userspace XSAVE buffer do not always align
with their feature numbers, the XSAVE format conversion needs to be
reconsidered to align with the revised xstate size calculation logic.
* For signal handling, XSAVE and XRSTOR are used directly to save and
restore extended registers.
* For ptrace, KVM, and signal returns (for 32-bit frame), the kernel
copies data between its internal buffer and the userspace XSAVE buffer.
If memcpy() were used for these cases, existing offset helpers — such
as __raw_xsave_addr() or xstate_offsets[] — would be sufficient to
handle the format conversion.
== Problem ==
When copying data from the compacted in-kernel buffer to the
non-compacted userspace buffer, the function follows the
user_regset_get2_fn() prototype. This means it utilizes struct membuf
helpers for the destination buffer. As defined in regset.h, these helpers
update the memory pointer during the copy process, enforcing sequential
writes within the loop.
Since xstate components are processed sequentially, any component whose
buffer position does not align with its feature number has an issue.
== Solution ==
Replace for_each_extended_xfeature() with the newly introduced
for_each_extended_xfeature_in_order(). This macro ensures xstate
components are handled in the correct order based on their actual
positions in the destination buffer, rather than their feature numbers.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320234301.8342-5-chang.seok.bae@intel.com
The current xstate size calculation assumes that the highest-numbered
xstate feature has the highest offset in the buffer, determining the size
based on the topmost bit in the feature mask. However, this assumption is
not architecturally guaranteed -- higher-numbered features may have lower
offsets.
With the introduction of the xfeature order table and its helper macro,
xstate components can now be traversed in their positional order. Update
the non-compacted format handling to iterate through the table to
determine the last-positioned feature. Then, set the offset accordingly.
Since size calculation primarily occurs during initialization or in
non-critical paths, looping to find the last feature is not expected to
have a meaningful performance impact.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320234301.8342-4-chang.seok.bae@intel.com
The kernel has largely assumed that higher xstate component numbers
correspond to later offsets in the buffer. However, this assumption no
longer holds for the non-compacted format, where a newer state component
may have a lower offset.
When iterating over xstate components in offset order, using the feature
number as an index may be misleading. At the same time, the CPU exposes
each component’s size and offset based on its feature number, making it a
key for state information.
To provide flexibility in handling xstate ordering, introduce a mapping
table: feature order -> feature number. The table is dynamically
populated based on the CPU-exposed features and is sorted in offset order
at boot time.
Additionally, add an accessor macro to facilitate sequential traversal of
xstate components based on their actual buffer positions, given a feature
bitmask. This accessor macro will be particularly useful for computing
custom non-compacted format sizes and iterating over xstate offsets in
non-compacted buffers.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320234301.8342-3-chang.seok.bae@intel.com
Traditionally, new xstate components have been assigned sequentially,
aligning feature numbers with their offsets in the XSAVE buffer. However,
this ordering is not architecturally mandated in the non-compacted
format, where a component's offset may not correspond to its feature
number.
The kernel caches CPUID-reported xstate component details, including size
and offset in the non-compacted format. As part of this process, a sanity
check is also conducted to ensure alignment between feature numbers and
offsets.
This check was likely intended as a general guideline rather than a
strict requirement. Upcoming changes will support out-of-order offsets.
Remove the check as becoming obsolete.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250320234301.8342-2-chang.seok.bae@intel.com
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250408-gpiochip-set-rv-pwm-v1-1-61e5c3358a74@linaro.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The .round_waveform_tohw() is supposed to return 0 if the request could
be rounded down to match the hardware capabilities and return 1 if
rounding down wasn't possible.
Expand the PWM_DEBUG check to not only assert proper downrounding if 0
was returned but also check that it was actually rounded up when the
callback signalled uprounding.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/dfb824ae37f99df068c752d48cbd163c044a74fb.1743844730.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
When you're interested in the actual register settings the driver
chooses or interprets you want to see them also for calls that hit
corner cases.
Make sure that all calls to stm32_pwm_round_waveform_tohw() and
stm32_pwm_round_waveform_fromhw() emit the debug message about the
register settings.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/fe154e79319da5ff4159cdc71201a9d3b395e491.1743844730.git.u.kleine-koenig@baylibre.com
[ukleinek: widen scope of rate in stm32_pwm_round_waveform_fromhw() to fix FTBFS]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Traditionally /sys/kernel/debug/pwm only contained info from pwm->state.
Most of the time this data represents the last requested setting which
might differ considerably from the actually configured in hardware
setting.
Expand the information in the debugfs file with the actual values.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20250404104844.543479-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
dev_get_drvdata()'s parameter is a const pointer, so the chip passed to
pwmchip_get_drvdata() can be const, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250403151134.266388-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add a message to the error path of devm_clk_get() and simplify the error
path of devm_pwmchip_add() while improving the error message en passant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250313072855.3360076-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
meson_pwm_cnt_to_ns() uses clock rate got from clk_get_rate(). clk object
is getting from driver's private data thru several steps. Since
meson_pwm_cnt_to_ns() is called several times from a single scope it's
easier to get clock rate once and pass it as parameter.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241225105639.1787237-2-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
g12, axg and s4 SoC families support constant and polarity bits
so enable those features in corresponding chip data structs.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241119125318.3492261-5-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add separate devce id data for compatibles: amlogic,meson-g12a-ee-pwm,
amlogic,meson-axg-pwm-v2, amlogic,meson-g12-pwm-v2 due to those PWM
modules have different set of features than meson8.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241119125318.3492261-4-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Newer meson PWM IPs support constant and polarity bits. Support them to
correctly implement constant and inverted output levels.
Using constant bit allows to have truly stable low or high output level.
Since hi and low regs internally increment its values by 1 just writing
zero to any of them gives 1 clock count impulse. If constant bit is set
zero value in hi and low regs is not incremented.
Using polarity bit instead of swapping hi and low reg values allows to
correctly identify inversion in .get_state().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241119125318.3492261-3-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
In .get_state() callback meson_pwm_channel struct are used to store
lo and hi reg values but they are never reused after that so
for clearness use local variable instead.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Link: https://lore.kernel.org/r/20241119125318.3492261-2-gnstark@salutedevices.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The stack pointer is already aligned by the kernel to a multiple of 16.
See STACK_ROUND() in fs/binfmt_elf.c.
The manual realignment is unnecessary, drop it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250316-nolibc-sp-align-v1-1-1e1fb073ca1e@weissschuh.net
drm-misc-next for v6.16-rc1:
UAPI Changes:
- Add ASAHI uapi header!
- Add apple fourcc modifiers.
- Add capset virtio definitions to UAPI.
- Extend EXPORT_SYNC_FILE for timeline syncobjs.
Cross-subsystem Changes:
- Adjust DMA-BUF sg handling to not cache map on attach.
- Update drm/ci, hlcdc, virtio, maintainers.
- Update fbdev todo.
- Allow setting dma-device for dma-buf import.
- Export efi_mem_desc_lookup to make efidrm build as a module.
Core Changes:
- Update drm scheduler docs.
- Use the correct resv object in TTM delayed destroy.
- Fix compiler warning with panic qr code, and other small fixes.
- drm/ci updates.
- Add debugfs file for listing all bridges.
- Small fixes to drm/client, ttm tests.
- Add documentation to display/hdmi.
- Add kunit tests for bridges.
- Dont fail managed device probing if connector polling fails.
- Create Kconfig.debug for drm core.
- Add tests for the drm scheduler.
- Add and use new access helpers for DPCPD.
- Add generic and optimized conversions for format-helper.
- Begin refcounting panel for improving lifetime handling.
- Unify simpledrm and ofdrm sysfb, and add extra features.
- Split hdmi audio in bridge to make DP audio work.
Driver Changes:
- Convert drivers to use devm_platform_ioremap_resource().
- Assorted small fixes to imx/legacy-bridg, gma500, pl111, nouveau, vc4,
vmwgfx, ast, mxsfb, xlnx, accel/qaic, v3d, bridge/imx8qxp-ldb, ofdrm,
bridge/fsl-ldb, udl, bridge/ti-sn65dsi86, bridge/anx7625, cirrus-qemu,
bridge/cdns-dsi, panel/sharp, panel/himax, bridge/sil902x, renesas,
imagination, various panels.
- Allow attaching more display to vkms.
- Add Powertip PH128800T004-ZZA01 panel.
- Add rotation quirk for ZOTAC panel.
- Convert bridge/tc358775 to atomic.
- Remove deprecated panel calls from synaptics, novatek, samsung panels.
- Refactor shmem helper page pinning and accel drivers using it.
- Add dmabuf support to accel/amdxdna.
- Use 4k page table format for panfrost/mediatek.
- Add common powerup/down dp link helper and use it.
- Assorted compiler warning fixes.
- Support dma-buf import for renesas
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# include/drm/drm_kunit_helpers.h
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e147ff95-697b-4067-9e2e-7cbd424e162a@linux.intel.com
According to Bspec VRR_CTL_IGN_MAX_SHIFT doesn't exist for MTL and
onwards. On LunarLake and onwards Bit 30 is "Mask Block PkgC" instead. Stop
writing the bit for MeteorLake and onwards
v2: "Ignore Max Shift" bit doesn't exist on MeteorLake either
Bspec: 50508, 68925
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250409054909.968531-1-jouni.hogander@intel.com
This will likely mean that the btree had only one node - there was
nothing or almost nothing in it, and we should reconstruct and continue.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This reverts commit e9f2517a3e.
Commit e9f2517a3e ("smb: client: fix TCP timers deadlock after
rmmod") is intended to fix a null-ptr-deref in LOCKDEP, which is
mentioned as CVE-2024-54680, but is actually did not fix anything;
The issue can be reproduced on top of it. [0]
Also, it reverted the change by commit ef7134c7fc ("smb: client:
Fix use-after-free of network namespace.") and introduced a real
issue by reviving the kernel TCP socket.
When a reconnect happens for a CIFS connection, the socket state
transitions to FIN_WAIT_1. Then, inet_csk_clear_xmit_timers_sync()
in tcp_close() stops all timers for the socket.
If an incoming FIN packet is lost, the socket will stay at FIN_WAIT_1
forever, and such sockets could be leaked up to net.ipv4.tcp_max_orphans.
Usually, FIN can be retransmitted by the peer, but if the peer aborts
the connection, the issue comes into reality.
I warned about this privately by pointing out the exact report [1],
but the bogus fix was finally merged.
So, we should not stop the timers to finally kill the connection on
our side in that case, meaning we must not use a kernel socket for
TCP whose sk->sk_net_refcnt is 0.
The kernel socket does not have a reference to its netns to make it
possible to tear down netns without cleaning up every resource in it.
For example, tunnel devices use a UDP socket internally, but we can
destroy netns without removing such devices and let it complete
during exit. Otherwise, netns would be leaked when the last application
died.
However, this is problematic for TCP sockets because TCP has timers to
close the connection gracefully even after the socket is close()d. The
lifetime of the socket and its netns is different from the lifetime of
the underlying connection.
If the socket user does not maintain the netns lifetime, the timer could
be fired after the socket is close()d and its netns is freed up, resulting
in use-after-free.
Actually, we have seen so many similar issues and converted such sockets
to have a reference to netns.
That's why I converted the CIFS client socket to have a reference to
netns (sk->sk_net_refcnt == 1), which is somehow mentioned as out-of-scope
of CIFS and technically wrong in e9f2517a3e, but **is in-scope and right
fix**.
Regarding the LOCKDEP issue, we can prevent the module unload by
bumping the module refcount when switching the LOCKDDEP key in
sock_lock_init_class_and_name(). [2]
For a while, let's revert the bogus fix.
Note that now we can use sk_net_refcnt_upgrade() for the socket
conversion, but I'll do so later separately to make backport easy.
Link: https://lore.kernel.org/all/20250402020807.28583-1-kuniyu@amazon.com/ #[0]
Link: https://lore.kernel.org/netdev/c08bd5378da647a2a4c16698125d180a@huawei.com/ #[1]
Link: https://lore.kernel.org/lkml/20250402005841.19846-1-kuniyu@amazon.com/ #[2]
Fixes: e9f2517a3e ("smb: client: fix TCP timers deadlock after rmmod")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
This reverts commit 4e7f1644f2.
The commit e9f2517a3e ("smb: client: fix TCP timers deadlock after
rmmod") is not only a bogus fix for LOCKDEP null-ptr-deref but also
introduces a real issue, TCP sockets leak, which will be explained in
detail in the next revert.
Also, CNA assigned CVE-2024-54680 to it but is rejecting it. [0]
Thus, we are reverting the commit and its follow-up commit 4e7f1644f2
("smb: client: Fix netns refcount imbalance causing leaks and
use-after-free").
Link: https://lore.kernel.org/all/2025040248-tummy-smilingly-4240@gregkh/ #[0]
Fixes: 4e7f1644f2 ("smb: client: Fix netns refcount imbalance causing leaks and use-after-free")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
