Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H
SoCs. Instances belong to a shared register region called OLB and gets
spawned as auxiliary device to the platform driver for clock.
There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB
instances on EyeQ6H; three have a reset controller embedded:
- West and east get handled by the same compatible.
- Acc (accelerator) is another one.
Each instance vary in the number and types of reset domains.
Instances with single domain expect a single cell, others two.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Switch from one sub-node per functionality in the system-controller to a
single node representing the entire OLB instance. This is the
recommended approach for controllers handling many different
functionalities; it is a single controller and should be represented by
a single devicetree node.
The reset bindings is removed and all properties will be described by:
soc/mobileye/mobileye,eyeq5-olb.yaml
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-1-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There are 7 sets of Reset Source in Amlogic T7 SoC reset controller,
and the offset between base and level registers is 0x40.
Add a new compatible string and struct meson_reset_param to support
the reset controller on T7 SoC.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240422-t7-reset-v2-2-cb82271d3296@amlogic.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since the rcdev structure is allocated by the reset controller drivers
themselves, they need to exists as long as there is a consumer. A call to
module_get() is already existing but that does not work when using
device-tree overlays. In order to guarantee that the underlying reset
controller device does not vanish while using it, add a get_device() call
when retrieving a reset control from a reset controller device and a
put_device() when releasing that control.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240808154658.247873-8-herve.codina@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
routine as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmbVf98ACgkQqDIjiipP
6E+K3wf/RixAgb3Hy9qRoJxu6sAwOvgxERCAsZae/byvZoaY9JG9FV4uDO0tqewl
7ph0A3yoVm/8xUHm04tLfvxtU1KzcpHzjc3zF3tlQr91zpbOxxKOvGLWGZmTwqPI
eAkp7+VSWkxV6Apa0pOZkPc3udNKAlzgw3CRYdFt8P88kMlNfgN7akG4ChsHaD7M
mE7s6kXiyxz3dkv6joaVVMfrSPKnsBOfxktroQPy/R6OQkDZTV0sFg7MPR9jEhQl
U5aUtgYMJfz88nFv4/h/j6KAejByFxWof0D7Bv2veQDl0baUq84zmRstHDsKc7IL
r1GsVZZedAV+MDu9DEST6xtUXfpX0Q==
=W07G
-----END PGP SIGNATURE-----
Merge tag 'timers-v6.11-rc7' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull clocksource driver fixes from Daniel Lezcano:
- Remove percpu irq related code in the timer-of initialization
routine as it is broken but also unused (Daniel Lezcano)
- Fix return -ETIME when delta exceeds INT_MAX and the next event not
taking effect sometimes (Jacky Bai)
Link: https://lore.kernel.org/all/d0e93dbd-b796-4726-b38c-089b685591c9@linaro.org
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
make the code simpler. Change to dev_err_probe() in handling
reset_controller_register() error to make it even simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-5-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes
the code also simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-4-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: 5a2308da9f ("riscv: Add Canaan Kendryte K210 reset controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-2-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: aed6f3cadc ("reset: berlin: convert to a platform driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-1-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_DIR_IN instead of GPIOF_IN, shrink the legacy definitions
by killing those GPIOF_DIR_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy
definitions by killing those GPIOF_INIT_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
1. Tegra210 EMC: Driver refactoring and rework.
2. Tegra186 EMC: Drop unused function.
3. FSL WEIM: Correct fsl,weim-cs-timing property to properly validate it
as an array.
4. TI AEMIF: Drop platform data support.
5. TI EMIF: Switch to of_property_read_bool().
6. Several cleanups in multiple drivers: TI AEMIF and EMIF, Tegra
EMC/MC, Atmel EBI, Samsung Exynos5422 DMC, STM32 FMC2 EBI, OMAP GPMC,
PL172 and PL1353 SMC. These are mostly code simplifying around
probe() like using
- devm_clk_get_enabled(),
- dev_err_probe(),
- scoped device node handling (cleanup.h),
- scoped for each OF child loops,
- scoped/guard locks.
-----BEGIN PGP SIGNATURE-----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=/0oc
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=W0Pq
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.12
1. Tegra210 EMC: Driver refactoring and rework.
2. Tegra186 EMC: Drop unused function.
3. FSL WEIM: Correct fsl,weim-cs-timing property to properly validate it
as an array.
4. TI AEMIF: Drop platform data support.
5. TI EMIF: Switch to of_property_read_bool().
6. Several cleanups in multiple drivers: TI AEMIF and EMIF, Tegra
EMC/MC, Atmel EBI, Samsung Exynos5422 DMC, STM32 FMC2 EBI, OMAP GPMC,
PL172 and PL1353 SMC. These are mostly code simplifying around
probe() like using
- devm_clk_get_enabled(),
- dev_err_probe(),
- scoped device node handling (cleanup.h),
- scoped for each OF child loops,
- scoped/guard locks.
* tag 'memory-controller-drv-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (35 commits)
memory: mtk-smi: Use devm_clk_get_enabled()
memory: pl353-smc: simplify with devm_clk_get_enabled()
memory: pl353-smc: simplify with dev_err_probe()
memory: pl172: simplify with devm_clk_get_enabled()
memory: pl172: simplify with dev_err_probe()
memory: omap-gpmc: simplify locking with guard()
memory: emif: simplify locking with guard()
memory: emif: drop unused 'irq_state' member
memory: ti-aemif: Revert "memory: ti-aemif: don't needlessly iterate over child nodes"
memory: ti-aemif: simplify with scoped for each OF child loop
memory: ti-aemif: simplify with dev_err_probe()
memory: tegra30-emc: simplify with scoped for each OF child loop
memory: tegra20-emc: simplify with scoped for each OF child loop
memory: tegra124-emc: simplify with scoped for each OF child loop
memory: tegra-mc: simplify with scoped for each OF child loop
memory: stm32-fmc2-ebi: simplify with dev_err_probe()
memory: stm32-fmc2-ebi: simplify with scoped for each OF child loop
memory: samsung: exynos5422-dmc: use scoped device node handling to simplify error paths
memory: samsung: exynos5422-dmc: simplify dmc->dev usage
memory: atmel-ebi: simplify with scoped for each OF child loop
...
Link: https://lore.kernel.org/r/20240827122926.30794-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use dev_err_probe() to simplify the error path and unify a message
template.
Using this helper is totally fine even if err is known to never
be -EPROBE_DEFER.
The benefit compared to a normal dev_err() is the standardized format
of the error code, it being emitted symbolically and the fact that
the error code is returned which allows more compact error paths.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240829131051.43200-1-shenlichuan@vivo.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use devm_mutex_init() instead of mutex_init(), to properly call
mutex_destroy() on probe failure / driver unbind.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-13-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use dev_err_probe() where possible in the driver's .probe() method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-11-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use devm resource management for driver's mailbox. This allows us to get
rid of the driver's .remove() method and the gotos in .probe().
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-10-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Simplify debugfs code: do not check for errors, as debugfs errors should
be ignored, and use devm action for dropping the debugfs directory.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-9-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to create attribute files in /sys/firmware/turris-mox-rwtm,
this driver creates it's own kobject type.
Simplify this by dropping this own kobject creation, and instead
creating standard device attribute files.
For backwards compatibility with sysfs ABI, create a symlink
/sys/firmware/turris-mox-rwtm, pointing to this device's sysfs
directory.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-8-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Drop including of.h, include several other headers that are used but not
included directly.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-6-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Hide signature generation related constants behind macros instead of
hardcoding the values.
Use SHA512_DIGEST_SIZE from crypto/sha2.h instead of hardcoded 64 as the
message size.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-5-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the boolean type for has_board_info, has_pubkey and last_sig_done
members of the driver's private structure.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-4-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the ETH_ALEN macro instead of hardcoded 6 for MAC address length.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-3-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The 4096 bytes limit in mox_hwrng_read() is due to the DMA buffer being
allocated to one PAGE_SIZE bytes. Use new local macro constant
RWTM_DMA_BUFFER_SIZE at allocation time and when used in mox_hwrng_read().
Use SZ_4K instead of PAGE_SIZE. Although PAGE_SIZE is never set to a
larger value on Armada 3720, it theoretically could, and this would be a
waste of space.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240831092050.23093-2-kabel@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In IS_ERR, the unlikely is used for the input parameter,
so these is no need to use it again outside.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
This macro utilizes the __force and __must_check modifiers, which instruct
the compiler to verify for errors at the locations where it is employed.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
This is a clear use-after-free error. We remove it, and rely on checking
the return code of vcap_del_rule.
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/kernel-janitors/7bffefc6-219a-4f71-baa0-ad4526e5c198@kili.mountain/
Fixes: c956b9b318 ("net: microchip: sparx5: Adding KUNIT tests of key/action values in VCAP API")
Signed-off-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of the adapters support Relaxed Ordering for the MRs.
Driver queries support for Memory region relax ordering support from
firmware and set relax ordering bit in REGISTER_MR request, if the users
request for the support. Also, this is supported only if the PCIe device
has enabled relaxed ordering attribute.
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Vijay Kumar Mandadapu <vijaykumar.mandadapu@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725256351-12751-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Firmware now have a new mr registration command where
both MR allocation and registration can be done in a
single hwrm command. Driver has to issue this new hwrm
command whenever the support flag is set. This reduces
the number of hwrm issued per MR creation and speed up
the MR creation.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725256351-12751-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Updating the HW structures for the pcie relax ordering support.
Newly added interface structures will be used in the
followup patch.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1725256351-12751-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
I am retiring from the project, so removing myself from MAINTAINERS as I won't
have time to dedicate to it.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Link: https://lore.kernel.org/r/20240828211117.9422-2-wedsonaf@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names and reset-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240818172819.121697-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
