DT bindings and binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZtWD0gAKCRCKwlD9ZEnx
cHMJAP9YsD4Okgk86R4m5yNmi9pOTRGOqNax9jXFzQsatAqkfwEAzRdRFw+POjw4
7kTI3sHgb7+h4Jh2VeR+FR3n8x5OfQE=
=V90C
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g057-dt-binding-defs-tag' into renesas-dts-for-v6.12
Renesas RZ/V2H DT Binding Definitions
DT bindings and binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On X1E80100, GPIO interrupts for wakeup-capable pins have been broken since
the introduction of the pinctrl driver. This prevents keyboard and touchpad
from working on most of the X1E laptops. So far we have worked around this
by manually building a kernel with the "wakeup-parent" removed from the
pinctrl node in the device tree, but we cannot expect all users to do that.
Implement a similar workaround in the driver by clearing the wakeirq_map
for X1E80100. This avoids using the PDC wakeup parent for all GPIOs
and handles the interrupts directly in the pinctrl driver instead.
The PDC driver needs additional changes to support X1E80100 properly.
Adding a workaround separately first allows to land the necessary PDC
changes through the normal release cycle, while still solving the more
critical problem with keyboard and touchpad on the current stable kernel
versions. Bypassing the PDC is enough for now, because we have not yet
enabled the deep idle states where using the PDC becomes necessary.
Cc: stable@vger.kernel.org
Fixes: 05e4941d97 ("pinctrl: qcom: Add X1E80100 pinctrl driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/20240830-x1e80100-bypass-pdc-v1-1-d4c00be0c3e3@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The test if a table is a permanently empty one, inspects the address of
the registered ctl_table argument.
However as sysctl_mount_point is an empty array and does not occupy and
space it can end up sharing an address with another object in memory.
If that other object itself is a "struct ctl_table" then registering
that table will fail as it's incorrectly recognized as permanently empty.
Avoid this issue by adding a dummy element to the array so that is not
empty anymore.
Explicitly register the table with zero elements as otherwise the dummy
element would be recognized as a sentinel element which would lead to a
runtime warning from the sysctl core.
While the issue seems not being encountered at this time, this seems
mostly to be due to luck.
Also a future change, constifying sysctl_mount_point and root_table, can
reliably trigger this issue on clang 18.
Given that empty arrays are non-standard in the first place it seems
prudent to avoid them if possible.
Fixes: 4a7b29f650 ("sysctl: move sysctl type to ctl_table_header")
Fixes: a35dd3a786 ("sysctl: drop now unnecessary out-of-bounds check")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Closes: https://lore.kernel.org/oe-lkp/202408051453.f638857e-lkp@intel.com
Signed-off-by: Joel Granados <j.granados@samsung.com>
Fix warning when use W=1 to build dtb, as following error:
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:65.7-76.4: Warning
(unit_address_vs_reg): /sram: node has a reg or ranges property,
but no unit name
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning
(unit_address_vs_reg): /soc/bus@fe000000/pinctrl@4000: node has a
unit name, but no reg or ranges property
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning
(simple_bus_reg): /soc/bus@fe000000/pinctrl@4000: missing or empty
reg/ranges property
arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts:205.9-245.4:
Warning (avoid_unnecessary_addr_size): /soc/bus@fe000000/spi@56000
/nand@0: unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Fixes: d4bd8f3023 ("arm64: dts: amlogic: add C3 AW419 board")
Fixes: 520b792e83 ("arm64: dts: amlogic: add some device nodes for C3")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202409010005.A7tSzgEn-lkp@intel.com/
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240902-fix_warning-v1-1-037029c584fc@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Switch to use dev_err_probe() to simplify the error path and
unify a message template.
Using this helper is totally fine even if err is known to never
be -EPROBE_DEFER.
The benefit compared to a normal dev_err() is the standardized format
of the error code, it being emitted symbolically and the fact that
the error code is returned which allows more compact error paths.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/20240829044835.2047794-1-yanzhen@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/dma/loongson1-apb-dma.c: In function 'ls1x_dma_probe':
drivers/dma/loongson1-apb-dma.c:531:42: warning: '%d' directive writing between 1 and 8 bytes into a region of size 2 [-Wformat-overflow=]
531 | sprintf(pdev_irqname, "ch%d", id);
| ^~
In function 'ls1x_dma_chan_probe',
inlined from 'ls1x_dma_probe' at drivers/dma/loongson1-apb-dma.c:605:8:
drivers/dma/loongson1-apb-dma.c:531:39: note: directive argument in the range [0, 19522579]
531 | sprintf(pdev_irqname, "ch%d", id);
| ^~~~~~
drivers/dma/loongson1-apb-dma.c:531:17: note: 'sprintf' output between 4 and 11 bytes into a destination of size 4
531 | sprintf(pdev_irqname, "ch%d", id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the array size and use snprintf() instead of sprintf().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408302108.xIR18jmD-lkp@intel.com/
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Link: https://lore.kernel.org/r/20240831-fix-loongson1-dma-v1-1-91376d87695c@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Wang Jianzheng <wangjianzheng@vivo.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/20240829064938.20114-1-wangjianzheng@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We used to wrap with no_free_ptr() for the return value from
memdup_user() with errors where the auto cleanup is applied. This was
a workaround because the initial implementation of kfree auto-cleanup
checked only NULL pointers.
Since recently, though, the kfree auto-cleanup checks with
IS_ERR_OR_NULL() (by the commit cd7eb8f83f ("mm/slab: make
__free(kfree) accept error pointers")), hence those workarounds became
superfluous. Let's drop them now.
Link: https://patch.msgid.link/20240902075246.3743-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add clocks, resets and power domains for USB modules available on the
Renesas RZ/G3S SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240822152801.602318-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Splitting error messages across multiple lines makes it harder to find
them in the kernel sources. Fix this by joining the messages.
Remove double whitespace (end of first line + begin of second line).
Fixes: 1c8e794432 ("pinctrl: improve warning messages")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/c8e3feeedbf42a130936a5afaea0f129bcda51f6.1724938156.git.geert+renesas@glider.be
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Refactor the `rzg2l_pinctrl_pinconf_set()` function by moving the call to
`arg = pinconf_to_config_argument(_configs[i])` to the beginning of the
loop. Previously, this call was redundantly made in most cases within the
switch statement.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240829194841.84398-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Support for enabling the digital noise filter, and support for
configuring the noise filter stages (via the FILNUM register) and the
sampling interval (via the FILCLKSEL register) are related: a pin
supports either all or none of them. Hence simplify declaring digital
noise filter support for a pin by using a single feature flag instead of
three separate flags.
This patch removes the PIN_CFG_FILNUM and PIN_CFG_FILCLKSEL configuration
macros and renames PIN_CFG_FILONOFF to PIN_CFG_NF.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240829194841.84398-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240822230104.707812-1-andy.shevchenko@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When an error occurs during the execution of the function
__devinit_dove_pinctrl_probe, the clk is not properly disabled.
Fix this by calling clk_disable_unprepare before return.
Fixes: ba607b6238 ("pinctrl: mvebu: make pdma clock on dove mandatory")
Signed-off-by: Wang Jianzheng <wangjianzheng@vivo.com>
Link: https://lore.kernel.org/20240829064823.19808-1-wangjianzheng@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
sunxi sunxi_pinctrl_init_with_variant get, enable clk and
deinit_device disable and unprepare it.
This simplifes the code and avoids the calls to
clk_disable_unprepare().
Signed-off-by: Wang Jianzheng <wangjianzheng@vivo.com>
Link: https://lore.kernel.org/20240829064737.16169-1-wangjianzheng@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The value written into the TPM CnV can only be updated into the hardware
when the counter increases. Additional writes to the CnV write buffer are
ignored until the register has been updated. Therefore, we need to check
if the CnV has been updated before continuing. This may require waiting for
1 counter cycle in the worst case.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-2-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
In tpm_set_next_event(delta), return -ETIME by wrong cast to int when delta
is larger than INT_MAX.
For example:
tpm_set_next_event(delta = 0xffff_fffe)
{
...
next = tpm_read_counter(); // assume next is 0x10
next += delta; // next will 0xffff_fffe + 0x10 = 0x1_0000_000e
now = tpm_read_counter(); // now is 0x10
...
return (int)(next - now) <= 0 ? -ETIME : 0;
^^^^^^^^^^
0x1_0000_000e - 0x10 = 0xffff_fffe, which is -2 when
cast to int. So return -ETIME.
}
To fix this, introduce a 'prev' variable and check if 'now - prev' is
larger than delta.
Cc: stable@vger.kernel.org
Fixes: 059ab7b82e ("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240725193355.1436005-1-Frank.Li@nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
GCC's named address space checks errors out with:
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_exit’:
drivers/clocksource/timer-of.c:29:46: error: passing argument 2 of
‘free_percpu_irq’ from pointer to non-enclosed address space
29 | free_percpu_irq(of_irq->irq, clkevt);
| ^~~~~~
In file included from drivers/clocksource/timer-of.c:8:
./include/linux/interrupt.h:201:43: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
201 | extern void free_percpu_irq(unsigned int, void __percpu *);
| ^~~~~~~~~~~~~~~
drivers/clocksource/timer-of.c: In function ‘timer_of_irq_init’:
drivers/clocksource/timer-of.c:74:51: error: passing argument 4 of
‘request_percpu_irq’ from pointer to non-enclosed address space
74 | np->full_name, clkevt) :
| ^~~~~~
./include/linux/interrupt.h:190:56: note: expected ‘__seg_gs void *’
but argument is of type ‘struct clock_event_device *’
190 | const char *devname, void __percpu *percpu_dev_id)
Sparse warns about:
timer-of.c:29:46: warning: incorrect type in argument 2 (different address spaces)
timer-of.c:29:46: expected void [noderef] __percpu *
timer-of.c:29:46: got struct clock_event_device *clkevt
timer-of.c:74:51: warning: incorrect type in argument 4 (different address spaces)
timer-of.c:74:51: expected void [noderef] __percpu *percpu_dev_id
timer-of.c:74:51: got struct clock_event_device *clkevt
It appears the code is incorrect as reported by Uros Bizjak:
"The referred code is questionable as it tries to reuse
the clkevent pointer once as percpu pointer and once as generic
pointer, which should be avoided."
This change removes the percpu related code as no drivers is using it.
[Daniel: Fixed the description]
Fixes: dc11bae785 ("clocksource/drivers: Add timer-of common init routine")
Reported-by: Uros Bizjak <ubizjak@gmail.com>
Tested-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20240819100335.2394751-1-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When debug_fence_free() is unused
(CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS=n), it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:118:20: error: unused function 'debug_fence_free' [-Werror,-Wunused-function]
118 | static inline void debug_fence_free(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~
Fix this by marking debug_fence_free() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: fc1584059d ("drm/i915: Integrate i915_sw_fence with debugobjects")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking debug_fence_init_onstack() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 214707fc2c ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There are no more board files defining platform data for this driver so
remove the header and support from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Don't use specialized OF accessors if we can avoid it: switch to using
the generic device property helpers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Include mod_devicetable.h for struct of_device_id and its helpers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently while defining `THIS_MODULE` symbol in `module!()`, the
pointer used to construct `ThisModule` is derived from an immutable
reference of `__this_module`, which means the pointer doesn't have
the provenance for writing, and that means any write to that pointer
is UB regardless of data races or not. However, the usage of
`THIS_MODULE` includes passing this pointer to functions that may write
to it (probably in unsafe code), and this will create soundness issues.
One way to fix this is using `addr_of_mut!()` but that requires the
unstable feature "const_mut_refs". So instead of `addr_of_mut()!`,
an extern static `Opaque` is used here: since `Opaque<T>` is transparent
to `T`, an extern static `Opaque` will just wrap the C symbol (defined
in a C compile unit) in an `Opaque`, which provides a pointer with
writable provenance via `Opaque::get()`. This fix the potential UBs
because of pointer provenance unmatched.
Reported-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/465412664
Fixes: 1fbde52bde ("rust: add `macros` crate")
Cc: stable@vger.kernel.org # 6.6.x: be2ca1e039: ("rust: types: Make Opaque::get const")
Link: https://lore.kernel.org/r/20240828180129.4046355-1-boqun.feng@gmail.com
[ Fixed two typos, reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Gen P7 adapters needs to share a toggle bits information received
in kernel driver with the user space. User space needs this
info to arm the SRQ.
User space application can get this page using the
UAPI routines. Library will mmap this page and get the
toggle bits to be used in the next ARM Doorbell.
Uses a hash list to map the SRQ structure from the SRQ ID.
SRQ structure is retrieved from the hash list while the
library calls the UAPI routine to get the toggle page
mapping. Currently the full page is mapped per SRQ. This
can be optimized to enable multiple SRQs from the same
application share the same page and different offsets
in the page
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1724945645-14989-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Refactor the code in this function to have common code.
This is used in subsequent patches.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1724945645-14989-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
SRQ arming requires the toggle bits received from hardware.
Get the toggle bits from SRQ notification for the
gen p7 adapters. This value will be zero for the older adapters.
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1724945645-14989-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
As opposed to open-code, using the ERR_CAST macro clearly indicates that
this is a pointer to an error value and a type conversion was performed.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://patch.msgid.link/20240828082720.33231-1-shenlichuan@vivo.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Simplify nilfs_segctor_thread(), the main loop function of the log writer
thread, to make the basic structure easier to understand.
In particular, the acquisition and release of the sc_state_lock spinlock
was scattered throughout the function, so extract the determination of
whether log writing is required into a helper function and make the
spinlock lock sections clearer.
Link: https://lkml.kernel.org/r/20240826174116.5008-9-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By using kthread_create() and kthread_stop() to start and stop the log
writer thread, eliminate custom thread start and stop helpers, as well as
the wait queue "sc_wait_task" on the "nilfs_sc_info" struct and
NILFS_SEGCTOR_QUIT flag that exist only to implement them.
Also, update the kernel doc comments of the changed functions as
appropriate.
Link: https://lkml.kernel.org/r/20240826174116.5008-8-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit f5d4e04634 ("nilfs2: fix use-after-free of timer for log
writer thread") is applied, nilfs_construct_timeout(), which is called by
a timer and wakes up the log writer thread, is never called after the log
writer thread has terminated.
As a result, the member variable "sc_timer_task" of the "nilfs_sc_info"
structure, which was added when timer_setup() was adopted to retain a
reference to the log writer thread's task even after it had terminated, is
no longer needed, as it should be; we can simply use "sc_task" instead,
which holds a reference to the log writer thread's task for its lifetime.
So, eliminate "sc_timer_task" by this means.
Link: https://lkml.kernel.org/r/20240826174116.5008-7-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 93aef9eda1 ("nilfs2: fix incorrect inode allocation from
reserved inodes") is applied, the inode number returned by
nilfs_ifile_create_inode() is guaranteed to always be greater than or
equal to NILFS_USER_INO, so if the inode number is a reserved inode number
(less than NILFS_USER_INO), the code to repair the bitmap immediately
following it is no longer executed. So, delete it.
Link: https://lkml.kernel.org/r/20240826174116.5008-6-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use get_random_u32() as the source for inode->i_generation for new inodes,
and eliminate the original source, the shared counter ns_next_generation
along with its exclusive access spinlock ns_next_gen_lock.
Link: https://lkml.kernel.org/r/20240826174116.5008-5-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In nilfs_iget_locked() and nilfs_ilookup(), which are used to find or
obtain nilfs2 inodes, the nilfs_iget_args structure used to identify
inodes has type information divided into multiple booleans, making type
determination complicated.
Simplify inode type determination by consolidating inode type information
into an unsigned integer represented by a comibination of flags and by
separating the type identification information for on-memory inodes from
the i_state member in the nilfs_inode_info structure.
Link: https://lkml.kernel.org/r/20240826174116.5008-4-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
