Add Error Signaling Module (ESM) instances in MCU and MAIN domains,
set ESM interrupt sources for rti as per TRM [0] 10.4 Interrupt
Sources.
Add comments to describe what interrupt sources are routed to ESM
modules.
[0] https://www.ti.com/lit/pdf/spruj16
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add comments to describe what interrupt sources are routed to ESM
modules.
There is no functional change.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-5-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix interrupt sources for rti routed to the ESM0 as per [0], in 10.4
Interrupt Sources
Add comments to describe what interrupt sources are routed to ESM
modules.
[0] https://www.ti.com/lit/pdf/spruj83
Fixes: b5080c7c1f ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Remove 'reserved' status for MCU ESM node. Watchdog reset is
propagated through ESM0 to MCU ESM to reset the CPU, so enable MCU ESM
to reset the CPU with watchdog timeout.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240815204833.452132-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Fix the gpio hog node name to p15-hog to match up with gpio-hog
convention. This fixes dtbs_check warning:
p15: $nodename:0: 'p15' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
Acked-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240830102822.3970269-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Rename the pin mux and gpio-hog node names to match up with binding
rules. This fixes dtbs_check warnings:
'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+'
'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
While at it, change the phandle name to be consistent with the pinctrl
naming.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240830113137.3986091-1-nm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-5-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-4-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add FSS regions at 0x50000000, 0x400000000, and 0x600000000. Although
not used currently by the Linux FSS driver, these regions belong to
the FSS and should be included in the ranges mapping.
While here, a couple of these numbers had missing zeros which was
hidden by odd alignments, fix both these issues.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://lore.kernel.org/r/20240828172956.26630-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
USB on AM64 is the same peripheral as on J721E. It has a specific
compatible for potential integration details. Express this
relationship, matching what the dt-bindings indicate.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240726-s2r-cdns-v5-12-8664bfb032ac@bootlin.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Don't populate the const read-only array check_addr on the stack at
run time, instead make it static.
Link: https://lore.kernel.org/linux-pci/20240822205941.643187-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
[kwilczynski: refactor array definition]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Srujana Challa says:
====================
octeontx2-af: update CPT block for CN10KB and CN10KA B0
This commit addresses two key updates for the CN10KB and CN10KA B0:
1. The number of FLT interrupt vectors has been reduced to 2 on CN10KB.
The code is updated to reflect this change across the CN10K series.
2. The maximum CPT credits that RX can use are now configurable through
a hardware CSR on CN10KA B0. This patch sets the default value to optimize
peak performance, aligning it with other chip versions.
v2:
- Addressed the review comments.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The maximum CPT credits that RXC can use are now configurable on CN10KA B0
through a hardware CSR. This patch sets the default value to optimize peak
performance, aligning it with other chip versions.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch modifies the driver to prevent access to RXC hardware
registers on the CN10KB, as RXC is not available on this chip.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the driver to use a dynamic number of vectors instead
of a hard-coded value. This change accommodates the CN10KB, which has 2
vectors, unlike the previously supported chips that have 3 vectors.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Johnston says:
====================
net: mctp-serial: Fix for missing tx escapes
The mctp-serial code to add escape characters was incorrect due to an
off-by-one error. This series adds a test for the chunking which splits
by escape characters, and fixes the bug.
v2: Fix kunit param const pointer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
0x7d and 0x7e bytes are meant to be escaped in the data portion of
frames, but this didn't occur since next_chunk_len() had an off-by-one
error. That also resulted in the final byte of a payload being written
as a separate tty write op.
The chunk prior to an escaped byte would be one byte short, and the
next call would never test the txpos+1 case, which is where the escaped
byte was located. That meant it never hit the escaping case in
mctp_serial_tx_work().
Example Input: 01 00 08 c8 7e 80 02
Previous incorrect chunks from next_chunk_len():
01 00 08
c8 7e 80
02
With this fix:
01 00 08 c8
7e
80 02
Cc: stable@vger.kernel.org
Fixes: a0c2ccd9b5 ("mctp: Add MCTP-over-serial transport binding")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test various edge cases of inputs that contain characters
that need escaping.
This adds a new kunit suite for mctp-serial.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code in vmd_shutdown() had an indentation issue where spaces were
used instead of tabs. This commit corrects the indentation to use tabs,
adhering to the Linux kernel coding style guidelines.
Issue reported by the checkpatch.pl script:
ERROR: code indent should use tabs where possible
#1056: FILE: drivers/pci/controller/vmd.c:1056:
+ struct vmd_dev *vmd = pci_get_drvdata(dev);$
WARNING: please, no spaces at the start of a line
#1056: FILE: drivers/pci/controller/vmd.c:1056:
+ struct vmd_dev *vmd = pci_get_drvdata(dev);$
ERROR: code indent should use tabs where possible
#1058: FILE: drivers/pci/controller/vmd.c:1058:
+ vmd_remove_irq_domain(vmd);$
WARNING: please, no spaces at the start of a line
#1058: FILE: drivers/pci/controller/vmd.c:1058:
+ vmd_remove_irq_domain(vmd);$
No functional changes are intended.
Link: https://lore.kernel.org/linux-pci/20240901092602.17414-1-riyandhiman14@gmail.com
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Standardize the parameters in xfs_{alloc,bm,ino,rmap,refcount}bt_maxrecs
so that we have consistent calling conventions. This doesn't affect the
kernel that much, but enables us to clean up userspace a bit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While refactoring code, I noticed that when xfs_iroot_realloc tries to
shrink a bmbt root block, it allocates a smaller new block and then
copies "records" and pointers to the new block. However, bmbt root
blocks cannot ever be leaves, which means that it's not technically
correct to copy records. We /should/ be copying keys.
Note that this has never resulted in actual memory corruption because
sizeof(bmbt_rec) == (sizeof(bmbt_key) + sizeof(bmbt_ptr)). However,
this will no longer be true when we start adding realtime rmap stuff,
so fix this now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper function to load quota inodes in the case where the
dqtype and the sb quota inode fields correspond. This is true for
nearly all the iget callsites in the quota code, except for when we're
switching the group and project quota inodes. We'll need this in
subsequent patches to make the metadir handling less convoluted.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't report FITRIMming more bytes than possibly exist in the
filesystem.
Fixes: 410e8a18f8 ("xfs: don't bother reporting blocks trimmed via FITRIM")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Several people reported C++ compilation errors due to things that C
compilers allow but C++ compilers do not. Fix both of these problems,
and hope there aren't more of these brown paper bags in 2 months when we
finally get these fixes through the process into a released xfsprogs.
NOTE: I am submitting this bugfix over the objections of a former
maintainer, who insists that we should remove this function from the
published userspace ABI instead of fixing the C++ compilation errors.
No deprecation period, no discussion, just a hard drop of an already
provided and correct C function, which would be in contravention of
Linus' rules. IOWs, removing ABI that have already shipped in a
released kernel requires a careful deprecation period, so I will let
that maintainer run that process.
Reported-by: kernel@mattwhitlock.name
Reported-by: sam@gentoo.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219203
Fixes: 233f4e12bb ("xfs: add parent pointer ioctls")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move this function out of xfs_ioctl.c to reduce the clutter in there,
and make the entire getfsmap implementation self-contained in a single
file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There isn't much of a good reason to pass the xfs_rtalloc_rec structures
that describe extents to xfs_rtalloc_query_range as we really just want
a lower and upper bound xfs_rtxnum_t. Pass the rtxnum directly and
simply the interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
To prepare for being able to join an already locked rtbitmap inode to a
transaction split out separate helpers for joining the transaction from
the locking helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the xfs_icreate_args object to xfs_dialloc since we can extract the
relevant mode (really just the file type) and parent inumber from there.
This simplifies the calling convention in preparation for the next
patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This patch introduces two more new ioctls to manage atomic updates to
file contents -- XFS_IOC_START_COMMIT and XFS_IOC_COMMIT_RANGE. The
commit mechanism here is exactly the same as what XFS_IOC_EXCHANGE_RANGE
does, but with the additional requirement that file2 cannot have changed
since some sampling point. The start-commit ioctl performs the sampling
of file attributes.
Note: This patch currently samples i_ctime during START_COMMIT and
checks that it hasn't changed during COMMIT_RANGE. This isn't entirely
safe in kernels prior to 6.12 because ctime only had coarse grained
granularity and very fast updates could collide with a COMMIT_RANGE.
With the multi-granularity ctime introduced by Jeff Layton, it's now
possible to update ctime such that this does not happen.
It is critical, then, that this patch must not be backported to any
kernel that does not support fine-grained file change timestamps.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The order of the functions in this file has gotten a little confusing
over the years. Specifically, the two data device implementations
(bnobt and rmapbt) could be adjacent in the source code instead of split
in two by the logdev and rtdev fsmap implementations. We're about to
add more functionality to this file, so rearrange things now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Simplify the number of block number conversion helpers by removing
xfs_rtb_to_rtxrem. Any recent compiler is smart enough to eliminate
the double divisions if using separate xfs_rtb_to_rtx and
xfs_rtb_to_rtxoff calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add helpers to libxfs that can be shared by growfs and mkfs for
initializing the rtbitmap and summary, and by passing the optional data
pointer also by repair for rebuilding them. This will become even more
useful when the rtgroups feature adds a metadata header to each block,
which means even more shared code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: minor documentation and data advance tweaks]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Match the inode number instead of the inode pointers, as the inode
pointers in the superblock will go away soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: port to my tree, make the parameter a const pointer]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Track the RT summary file size in blocks, just like the RT bitmap
file. While we have users of both units, blocks are used slightly
more often and this matches the bitmap file for consistency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This function tries to find a suitable free space extent starting from
a particular rtbitmap block. Some time ago, I added a clamping function
to prevent the free space scans from running off the end of the bitmap,
but I didn't quite get the logic right.
Let's say there's an allocation request with a minlen of 5 and a maxlen
of 32 and we're scanning the last rtbitmap block. If we come within 4
rtx of the end of the rt volume, maxlen will get clamped to 4. If the
next 3 rtx are free, we could have satisfied the allocation, but the
code setting partial besti/bestlen for "minlen < maxlen" will think that
we're doing a non-variable allocation and ignore it.
The root of this problem is overwriting maxlen; I should have stuffed
the results in a different variable, which would not have introduced
this bug.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add helper to calculate the last currently used rt bitmap block to
better structure the growfs code and prepare for future changes to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Actually use the inumber validator to check the argument passed in here.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfs_rtbitmap_wordcount and xfs_rtsummary_wordcount are currently unused,
so remove them to simplify refactoring other rtbitmap helpers. They
can be added back or simply open coded when actually needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The near rt allocator employs two allocation strategies -- first it
tries to allocate at exactly @start. If that fails, it will pivot back
and forth around that starting point looking for an appropriately sized
free space.
However, I clamped maxlen ages ago to prevent the exact allocation scan
from running off the end of the rt volume. This, I realize, was
excessive. If the allocation request is (say) for 32 rtx but the start
position is 5 rtx from the end of the volume, we clamp maxlen to 5. If
the exact allocation fails, we then pivot back and forth looking for 5
rtx, even though the original intent was to try to get 32 rtx.
If we then find 5 rtx when we could have gotten 32 rtx, we've not done
as well as we could have. This may be moot if the caller immediately
comes back for more space, but it might not be. Either way, we can do
better here.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a helper to contain the per-rtbitmap block logic in xfs_growfs_rt.
Note that this helper now allocates a new fake mount structure for
each rtbitmap block iteration instead of reusing the memory for an
entire growfs call. Compared to all the other work done when freeing
the blocks the overhead for this is in the noise and it keeps the code
nicely modular.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add common helpers for no-op scrubbing methods.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Before we start doing more surgery on the rt allocator, let's clean up
the exact allocator so that it doesn't change its arguments and uses the
helper introduced in the previous patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently the various low-level RT allocator functions call into
xfs_rtallocate_range directly, which ties them into the locking protocol
for the RT bitmap. As these helpers already return the allocated range,
lift the call to xfs_rtallocate_range into xfs_bmap_rtalloc so that it
happens as high as possible in the stack, which will simplify future
changes to the locking protocol.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
0 is a valid start RT extent, and with pending changes it will become
both more common and non-unique. Switch to pass a xfs_rtblock_t instead
so that we can use NULLRTBLOCK to determine if a hint was set or not.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There are two places in xfs_rtalloc.c where we want to make sure that a
count of rt extents is aligned with a particular prod(uct) factor. In
one spot, we actually use rounddown(), albeit unnecessarily if prod < 2.
In the other case, we open-code this rounding inefficiently by promoting
the 32-bit length value to a 64-bit value and then performing a 64-bit
division to figure out the subtraction.
Refactor this into a single helper that uses the correct types and
division method for the type, and skips the division entirely unless
prod is large enough to make a difference.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
