There are a number of places where RCU list iteration is
used, but that aren't (always) called with RCU held. Use
just list_for_each_entry() in most, and annotate iface
iteration with the required locks.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240827094939.ed8ac0b2f897.I8443c9c3c0f8051841353491dae758021b53115e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When using resctrl on systems with Sub-NUMA Clustering enabled, monitoring
groups may be allocated RMID values which would overrun the
arch_mbm_{local,total} arrays.
This is due to inconsistencies in whether the SNC-adjusted num_rmid value or
the unadjusted value in resctrl_arch_system_num_rmid_idx() is used. The
num_rmid value for the L3 resource is currently:
resctrl_arch_system_num_rmid_idx() / snc_nodes_per_l3_cache
As a simple fix, make resctrl_arch_system_num_rmid_idx() return the
SNC-adjusted, L3 num_rmid value on x86.
Fixes: e13db55b5a ("x86/resctrl: Introduce snc_nodes_per_l3_cache")
Signed-off-by: Peter Newman <peternewman@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240822190212.1848788-1-peternewman@google.com
In some cases the sink can reset itself after it was configured into MST
mode, without the driver noticing the disconnected state. For instance
the reset may happen in the middle of a modeset, or the (long) HPD pulse
generated may be not long enough for the encoder detect handler to
observe the HPD's deasserted state. In this case the sink's DPCD
register programmed to enable MST will be reset, while the driver still
assumes MST is still enabled. Detect this condition, which will tear
down and recreate/re-enable the MST topology.
v2:
- Add a code comment about adjusting the expected DP_MSTM_CTRL register
value for SST + SideBand. (Suraj, Jani)
- Print a debug message about detecting the link reset. (Jani)
- Verify the DPCD MST state only if it wasn't already determined that
the sink is disconnected.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11195
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823162918.1211875-1-imre.deak@intel.com
(cherry picked from commit 594cf78dc3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently, the Imagination E5010 JPEG Encoder is only present on Texas
Instruments K3 SoCs. Hence add a dependency on ARCH_K3, to prevent
asking the user about this driver when configuring a kernel without TI
K3 SoC support. The dependency can be relaxed if/when the encoder
appears on other SoC families.
Fixes: a1e2940458 ("media: imagination: Add E5010 JPEG Encoder driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
RK3588 handling is exactly the same as RK3568. This is not
handled using fallback compatibles to avoid exposing multiple
video devices on kernels not having the multicore disable
patch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Avoid exposing equal Hantro video codecs to userspace. Equal video
codecs allow scheduling work between the cores. For that kernel support
is required, which does not yet exist. Until that is implemented avoid
exposing each core separately to userspace so that multicore can be
added in the future without breaking userspace ABI.
This was written with Rockchip RK3588 in mind (which has 4 Hantro H1
cores), but applies to all SoCs.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
RK3588 has four Hantro H1 VEPUs (encoder-only) modules and one combined
Hantro H1/G1 VPU (decoder and encoder). These are not described as
separate IP, since they are sharing an internal cache. This adds the
RK3588 specific compatible string for the combined VPU, which seems to
be identical to the version found in the RK3568.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This encoder-only device is present four times on this SoC, and should
support everything the rk3568 vepu supports (so JPEG, H.264 and VP8
encoding). No fallback compatible has been added, since the operating
systems might already support RK3568 VEPU and want to avoid registering
four of them separately considering they can be used as a cluster.
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The integration for this SoC is similar to RK3066/RK3188.
Document it's compatible.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
- v4l2_av1_segmentation table formatting
- incorrect member name uv_sec_strength
- incorrect struct name v4l2_av1_global_motion
- incorrect link label for v4l2_av1_loop_filter
- add max_frame_height_minus_1
- struct ordering
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reference frame compression is a feature added in the G2 decoder to
compress frame buffers so that the bandwidth of storing/loading
reference frames can be reduced, especially with high resolution decoded
streams.
The impact of compressed frames is confirmed when using perf to monitor
the number of memory accesses with or without the compression feature.
The following command:
perf stat -a -e \
imx8_ddr0/cycles/,imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/ \
gst-launch-1.0 filesrc \
location=Jockey_3840x2160_120fps_420_8bit_HEVC_RAW.hevc ! queue ! \
h265parse ! v4l2slh265dec ! video/x-raw,format=NV12 ! fakesink
Gives us these results without the compression feature:
Performance counter stats for 'system wide':
1711300345 imx8_ddr0/cycles/
892207924 imx8_ddr0/read-cycles/
1291785864 imx8_ddr0/write-cycles/
13.760048353 seconds time elapsed
With the compression feature:
Performance counter stats for 'system wide':
274526799 imx8_ddr0/cycles/
453120194 imx8_ddr0/read-cycles/
833391434 imx8_ddr0/write-cycles/
18.257831534 seconds time elapsed
As expected the number of read/write cycles are really lower when
compression is used.
Since storing the compression data requires more memory a module
parameter named 'hevc_use_compression' is used to enable/disable
this feature and, by default, compression isn't used.
Enabling the compression feature means that the output-frames of the
decoder
are stored with a specific compression pixel-format. Since this
pixel format is unknown, this patch restrains the compression feature
usage to the cases where post-processor pixel-formats (NV12 or NV15)
are selected by the applications.
The Fluster compliance HEVC test suite score is still 141/147 with this
patch.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
"struct vb2_ops" are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
18059 3096 16 21171 52b3 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateful.o
After:
=====
text data bss dec hex filename
18171 2968 16 21155 52a3 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateful.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix a smatch static checker warning on vdec_h264_req_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 06fa5f757d ("media: mtk-vcodec: vdec: support stateless H.264 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix a smatch static checker warning on vdec_vp8_req_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 7a7ae26fd4 ("media: mediatek: vcodec: support stateless VP8 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fix a smatch static checker warning on vdec_h264_req_multi_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 397edc703a ("media: mediatek: vcodec: add h264 decoder driver for mt8186")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add hwmon support for fan1_input attribute, which will expose fan speed
in RPM. With this in place we can monitor fan speed using lm-sensors tool.
$ sensors
i915-pci-0300
Adapter: PCI adapter
in0: 653.00 mV
fan1: 3833 RPM
power1: N/A (max = 43.00 W)
energy1: 32.02 kJ
v2: Handle overflow, add mutex protection and ABI documentation
Aesthetic adjustments (Riana)
v3: Change rotations data type, ABI date and version
v4: Fix wakeref leak
Drop switch case and simplify hwm_fan_xx() (Andi)
v5: Rework time calculation, aesthetic adjustments (Andy)
v6: Drop redundant overflow logic (Andy)
Split fan_input_read() into dedicated helper (Badal)
v7: Fix undefined reference to __udivdi3 for i386 (Andy)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823034548.2670032-1-raag.jadav@intel.com
The Sirius notebooks have two sets of speakers 0x17 (sides) and
0x1d (top center). The side speakers are active by default but
the top speakers aren't.
This patch provides a pincfg quirk to activate the top speakers.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240827102540.9480-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The spd is no longer maintained as a linear list.
We also haven't been caching bundles in the xfrm_policy
struct since 2010.
While at it, add kdoc style comments for the xfrm_policy structure
and extend the description of the current rbtree based search to
mention why it needs to search the candidate set.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Use national,lm75a to specify exact variant used. This should cause
no functional changes.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable IIO hwmon support for ADC1 and ADC2. All channels are
available on X23 (ADC2) and X24 (ADC1) of MBa7x.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The interrupt pin of the PHY is connected to the GPIO expander, configure
it accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove unused property num-viewport to fix dtbs warnings.
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dtb: pcie@3400000: Unevaluated properties are not allowed ('num-viewport' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dtb: pcie@3400000: Unevaluated properties are not allowed ('num-viewport' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=BDrz
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rc5-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- two RDMA/smbdirect fixes and a minor cleanup
- punch hole fix
* tag 'v6.11-rc5-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_PUNCH_HOLE support
smb/client: fix rdma usage in smb2_async_writev()
smb/client: remove unused rq_iter_size from struct smb_rqst
smb/client: avoid dereferencing rdata=NULL in smb2_new_read_req()
Contains a bug fix for tpm_ibmvtpm driver so that it will take the bus
encryption into use.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZs4n/BIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9L9hQD+O8endY5Ydf5zi0n11kYw48Gn0hV0Suk2
6UGtWPxsD64BAKaVEYafdWyVhO9+7a8257g9k95nr6APO39Mam6RWnwN
=/XKU
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM fix from Jarkko Sakkinen:
"A bug fix for tpm_ibmvtpm driver so that it will take the bus
encryption into use"
* tag 'tpmdd-next-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: ibmvtpm: Call tpm2_sessions_init() to initialize session support
platform_get_resource_byname() and devm_ioremap_resource() can be
replaced by devm_platform_ioremap_resource_byname(), which can
simplify the code logic a bit, No functional change here.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The devm_clk_get_enabled() helpers:
- call devm_clk_get()
- call clk_prepare_enable() and register what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
This simplifies the code and avoids the calls to clk_disable_unprepare().
Signed-off-by: Huan Yang <link@vivo.com>
Link: https://lore.kernel.org/r/20240820102119.130298-1-link@vivo.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For flush request, md has a special flush handling to merge concurrent
flush request into single one, however, the whole mechanism is based on
a disk level spin_lock 'mddev->lock'. And fsync can be called quite
often in some user cases, for consequence, spin lock from IO fast path can
cause performance degradation.
Fortunately, the block layer already has flush handling to merge
concurrent flush request, and it only acquires hctx level spin lock. (see
details in blk-flush.c)
This patch removes the flush handling in md, and converts to use general
block layer flush handling in underlying disks.
Flush test for 4 nvme raid10:
start 128 threads to do fsync 100000 times, on arm64, see how long it
takes.
Test script:
void* thread_func(void* arg) {
int fd = *(int*)arg;
for (int i = 0; i < FSYNC_COUNT; i++) {
fsync(fd);
}
return NULL;
}
int main() {
int fd = open("/dev/md0", O_RDWR);
if (fd < 0) {
perror("open");
exit(1);
}
pthread_t threads[THREADS];
struct timeval start, end;
gettimeofday(&start, NULL);
for (int i = 0; i < THREADS; i++) {
pthread_create(&threads[i], NULL, thread_func, &fd);
}
for (int i = 0; i < THREADS; i++) {
pthread_join(threads[i], NULL);
}
gettimeofday(&end, NULL);
close(fd);
long long elapsed = (end.tv_sec - start.tv_sec) * 1000000LL + (end.tv_usec - start.tv_usec);
printf("Elapsed time: %lld microseconds\n", elapsed);
return 0;
}
Test result: about 10 times faster:
Before this patch: 50943374 microseconds
After this patch: 5096347 microseconds
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240827110616.3860190-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-26 (ice)
This series contains updates to ice driver only.
Jake implements and uses rd32_poll_timeout to replace a jiffies loop for
calling ice_sq_done. The rd32_poll_timeout() function is designed to allow
simplifying other places in the driver where we need to read a register
until it matches a known value.
Jake, Bruce, and Przemek update ice_debug_cq() to be more robust, and more
useful for tracing control queue messages sent and received by the device
driver.
Jake rewords several commands in the ice_control.c file which previously
referred to the "Admin queue" when they were actually generic functions
usable on any control queue.
Jake removes the unused and unnecessary cmd_buf array allocation for send
queues. This logic originally was going to be useful if we ever implemented
asynchronous completion of transmit messages. This support is unlikely to
materialize, so the overhead of allocating a command buffer is unnecessary.
Sergey improves the log messages when the ice driver reports that the NVM
version on the device is not supported by the driver. Now, these messages
include both the discovered NVM version and the requested/expected NVM
version.
Aleksandr Mishin corrects overallocation of memory related to adding
scheduler nodes.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Adjust over allocation of memory in ice_sched_add_root_node() and ice_sched_add_node()
ice: Report NVM version numbers on mismatch during load
ice: remove unnecessary control queue cmd_buf arrays
ice: reword comments referring to control queues
ice: stop intermixing AQ commands/responses debug dumps
ice: do not clutter debug logs with unused data
ice: improve debug print for control queue messages
ice: implement and use rd32_poll_timeout for ice_sq_done timeout
====================
Link: https://patch.msgid.link/20240826224655.133847-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KSZ8895/KSZ8864 is a switch family between KSZ8863/73 and KSZ8795, so it
shares some registers and functions in those switches already
implemented in the KSZ DSA driver.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Tested-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KSZ8895/KSZ8864 is a switch family developed before KSZ8795 and after
KSZ8863, so it shares some registers and functions in those switches.
KSZ8895 has 5 ports and so is more similar to KSZ8795.
KSZ8864 is a 4-port version of KSZ8895. The first port is removed
while port 5 remains as a host port.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/BYAPR11MB3558FD0717772263FAD86846EC8B2@BYAPR11MB3558.namprd11.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace fput() with sockfd_put() in handshake_nl_done_doit().
Signed-off-by: A K M Fazla Mehrab <a.mehrab@bytedance.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20240826182652.2449359-1-a.mehrab@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the values of WQs for RX and TX queues for MANA devices
are hardcoded to default sizes.
Allow configuring these values for MANA devices as ringparam
configuration(get/set) through ethtool_ops.
Pre-allocate buffers at the beginning of this operation, to
prevent complete network loss in low-memory conditions.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://patch.msgid.link/1724688461-12203-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_sf_do_5_2_4_dupcook() currently calls security_sctp_assoc_request()
on new_asoc, but as it turns out, this association is always discarded
and the LSM labels never get into the final association (asoc).
This can be reproduced by having two SCTP endpoints try to initiate an
association with each other at approximately the same time and then peel
off the association into a new socket, which exposes the unitialized
labels and triggers SELinux denials.
Fix it by calling security_sctp_assoc_request() on asoc instead of
new_asoc. Xin Long also suggested limit calling the hook only to cases
A, B, and D, since in cases C and E the COOKIE ECHO chunk is discarded
and the association doesn't enter the ESTABLISHED state, so rectify that
as well.
One related caveat with SELinux and peer labeling: When an SCTP
connection is set up simultaneously in this way, we will end up with an
association that is initialized with security_sctp_assoc_request() on
both sides, so the MLS component of the security context of the
association will get swapped between the peers, instead of just one side
setting it to the other's MLS component. However, at that point
security_sctp_assoc_request() had already been called on both sides in
sctp_sf_do_unexpected_init() (on a temporary association) and thus if
the exchange didn't fail before due to MLS, it won't fail now either
(most likely both endpoints have the same MLS range).
Tested by:
- reproducer from https://src.fedoraproject.org/tests/selinux/pull-request/530
- selinux-testsuite (https://github.com/SELinuxProject/selinux-testsuite/)
- sctp-tests (https://github.com/sctp/sctp-tests) - no tests failed
that wouldn't fail also without the patch applied
Fixes: c081d53f97 ("security: pass asoc to sctp_assoc_request and sctp_sk_clone")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM/SELinux)
Link: https://patch.msgid.link/20240826130711.141271-1-omosnace@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on guidance in include/linux/slab.h, replace kmem_cache_create()
with KMEM_CACHE() for sources under security/selinux to simplify creation
of SLAB caches.
Signed-off-by: Eric Suen <ericsu@linux.microsoft.com>
[PM: minor grammar nits in the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
For CCS formats on affected platforms, CCS can be used freely, but
display engine requires a multiple of 64k physical pages. No other
changes are needed.
At the BO creation time we don't know if the BO will be used for CCS
or not. If the scanout flag is set, and the BO is a multiple of 64k,
we take the safe route and force the physical alignment of 64k pages.
If the BO is not a multiple of 64k, or the scanout flag was not set
at BO creation, we reject it for usage as CCS in display. The physical
pages are likely not aligned correctly, and this will cause corruption
when used as FB.
The scanout flag and size being a multiple of 64k are used together
to enforce 64k physical placement.
VM_BIND is completely unaffected, mappings to a VM can still be aligned
to 4k, just like for normal buffers.
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-3-maarten.lankhorst@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some plane formats have been designed to require 64k physical alignment.
By returning whether this is the case for certain formats, we do not
need to hardcode this check inside Xe.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-2-maarten.lankhorst@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Always reprogram the hardware state on init. This ensures
the PMFW state is explicitly programmed and we are not relying
on the default PMFW state.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3131
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unnecessary TODO from spl_os_types.h
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use appropriate SPDX copyright for spl_os_types.h
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following fixes:
- Fix MS/MP mismatches in dml21 for dcn401
- Resolved Coverity issues
- Add back quality EASF and ISHARP and dc dependency changes
- Add sharpness support for windowed YUV420 video
- Add improvements for text display and HDR DWM and MPO
- Fix Synaptics Cascaded Panamera DSC Determination
- Allocate DCN35 clock table transfer buffers in GART
- Add Replay Low Refresh Rate parameters in dc type
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Previous only applied sharpness for fullscreen YUV420 video.
[How]
Remove fullscrene restriction and apply sharpness for windowed
YUV420 video as well.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Tune settings for improved text display.
Handle differences between DWM and MPO in HDR path.
[How]
Update sharpener LBA table.
Use HDR multiplier to calculate scalar matrix coefficients
for HDR RGB MPO path.
Update unit tests.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
To supported Low Refresh Rate panel for Replay Feature,
Adding some parameters to record Low Refresh Rate information.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Dennis Chan <dennis.chan@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Addressed previous issues with quality changes and new issues due to
rolling back quality changes.
[How]
This reverts commit f9e6759888, fixes merge conflicts, and fixed some
formatting errors.
Store current sharpness level for each pregen table to minimize
calculating sharpness table every time.
Disable dynamic ODM when sharpness is enabled.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
