Add a local variable for slave->dev, to prepare for the lock change in
the next patch. There is no functionality change.
Fixes: 9a5605505d ("bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240823031056.110999-3-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add this implementation for bonding, so hardware resources can be
freed from the active slave after xfrm state is deleted. The netdev
used to invoke xdo_dev_state_free callback, is saved in the xfrm state
(xs->xso.real_dev), which is also the bond's active slave. To prevent
it from being freed, acquire netdev reference before leaving RCU
read-side critical section, and release it after callback is done.
And call it when deleting all SAs from old active real interface while
switching current active slave.
Fixes: 9a5605505d ("bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240823031056.110999-2-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
of_node_to_fwnode() is a IRQ domain specific implementation of
of_fwnode_handle(). Replace the former with more suitable API.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822230550.708112-1-andy.shevchenko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that struct bitmap_page and bitmap is not used externally anymore,
move them from md-bitmap.h to md-bitmap.c (expect that dm-raid is still
using define marco 'COUNTER_MAX').
Also fix some checkpatch warnings.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-43-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
And move the condition "if (mddev->bitmap)" into md_bitmap_resize() as
well, on the one hand make code cleaner, on the other hand try not to
access bitmap directly.
Since we are here, also change the parameter 'init' from int to bool.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-35-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Add a parameter 'bool sync' to distinguish them, and
md_bitmap_unplug_async() won't be exported anymore, hence
bitmap_operations only need one op to cover them.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-32-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
So that the implementation won't be exposed, and it'll be possible
to invent a new bitmap by replacing bitmap_operations.
Also change the parameter from bitmap to mddev, to avoid access
bitmap outside md-bitmap.c as much as possible.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-30-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Setting 'nomodeset' on the kernel command line disables all graphics
drivers with modesetting capabilities, leaving only firmware drivers,
such as simpledrm or efifb.
Most DRM drivers automatically support 'nomodeset' via DRM's module
helper macros. In xe, which uses regular module_init(), manually call
drm_firmware_drivers_only() to test for 'nomodeset'. Do not register
the driver if set.
v2:
- use xe's init table (Lucas)
- do NULL test for init/exit functions
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827121003.97429-1-tzimmermann@suse.de
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
This reverts commit 8ebb1fc2e6.
The panel should be handled through the samsung-atna33xc20 driver for
correct power up timings. Otherwise the backlight does not work correctly.
We have existing users of this panel through the generic "edp-panel"
compatible (e.g. the Qualcomm X1E80100 CRD), but the screen works only
partially in that configuration: It works after boot but once the screen
gets disabled it does not turn on again until after reboot. It behaves the
same way with the default "conservative" timings, so we might as well drop
the configuration from the panel-edp driver. That way, users with old DTBs
will get a warning and can move to the new driver.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715-x1e80100-crd-backlight-v2-2-31b7f2f658a3@linaro.org
Some clocks maybe default enabled by hardware. For clocks that don't
have users, that will be left in hardware default state, because prepare
count and enable count is zero,if there is no is_prepared hook to get
the hardware state. So add is_prepared hook to detect the hardware
state. Then when disabling the unused clocks, they can be simply
turned OFF to save power during kernel boot.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240806145601.1184337-1-peng.fan@oss.nxp.com
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On some TUXEDO platforms, a Samsung 990 Evo NVMe leads to a high
power consumption in s2idle sleep (2-3 watts).
This patch applies 'Force No Simple Suspend' quirk to achieve a
sleep with a lower power consumption, typically around 0.5 watts.
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
- Fix to unit test coverage
- Fix bug with enabling CPPC on hetero designs
- Fix uninitialized variable
-----BEGIN PGP SIGNATURE-----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=5eXu
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.11-2024-08-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate driver fixes for 6.11-rc6 from Mario Limonciello:
"amd-pstate fixes for 6.11-rc
- Fix to unit test coverage
- Fix bug with enabling CPPC on hetero designs
- Fix uninitialized variable"
* tag 'amd-pstate-v6.11-2024-08-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcore
cpufreq/amd-pstate: Use topology_logical_package_id() instead of logical_die_id()
cpufreq: amd-pstate: Fix uninitialized variable in amd_pstate_cpu_boost_update()
Follow-up to 45160cebd6 ("net: veth: Disable netpoll support") to
also disable netpoll for netkit interfaces. Same conditions apply
here as well.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Breno Leitao <leitao@debian.org>
Cc: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/eab2d69ba2f4c260aef62e4ff0d803e9f60c2c5d.1724414250.git.daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
- Fix the hwirq map and pin offsets in the Qualcomm X1E80100 driver.
- Fix the pin range handling in the AT91 driver so it works again.
- Fix a NULL-dereference risk in pinctrl single.
- Fix a serious biasing bug in the Mediatek driver.
- Fix the level trigged IRQ in the StarFive JH7110.
- Fix the iomux width in the Rockchip GPIO2-B pin handling.
-----BEGIN PGP SIGNATURE-----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=+YGQ
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix the hwirq map and pin offsets in the Qualcomm X1E80100 driver
- Fix the pin range handling in the AT91 driver so it works again
- Fix a NULL-dereference risk in pinctrl single
- Fix a serious biasing bug in the Mediatek driver
- Fix the level trigged IRQ in the StarFive JH7110
- Fix the iomux width in the Rockchip GPIO2-B pin handling
* tag 'pinctrl-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: correct RK3328 iomux width flag for GPIO2-B pins
pinctrl: starfive: jh7110: Correct the level trigger configuration of iev register
pinctrl: qcom: x1e80100: Fix special pin offsets
pinctrl: mediatek: common-v2: Fix broken bias-disable for PULL_PU_PD_RSEL_TYPE
pinctrl: single: fix potential NULL dereference in pcs_get_function()
pinctrl: at91: make it work with current gpiolib
pinctrl: qcom: x1e80100: Update PDC hwirq map
It became a bit larger collection of fixes than wished at this time,
but all changes are small and mostly device-specific fixes that
should be fairly safe to apply. Majority of fixes are about ASoC
for AMD SOF, Cirrus codecs, lpass, etc, in addition to the usual
HD-audio quirks / fixes.
-----BEGIN PGP SIGNATURE-----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=u+nW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"It became a bit larger collection of fixes than wished at this time,
but all changes are small and mostly device-specific fixes that should
be fairly safe to apply.
Majority of fixes are about ASoC for AMD SOF, Cirrus codecs, lpass,
etc, in addition to the usual HD-audio quirks / fixes"
* tag 'sound-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ALSA: hda: hda_component: Fix mutex crash if nothing ever binds
ALSA: hda/realtek: support HP Pavilion Aero 13-bg0xxx Mute LED
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book3 Ultra
ASoC: cs-amp-lib: Ignore empty UEFI calibration entries
ASoC: cs-amp-lib-test: Force test calibration blob entries to be valid
ALSA: hda/realtek - FIxed ALC285 headphone no sound
ALSA: hda/realtek - Fixed ALC256 headphone no sound
ASoC: allow module autoloading for table board_ids
ASoC: allow module autoloading for table db1200_pids
ALSA: hda: cs35l56: Don't use the device index as a calibration index
ALSA: seq: Skip event type filtering for UMP events
ALSA: hda/realtek: Enable mute/micmute LEDs on HP Laptop 14-ey0xxx
ASoC: SOF: amd: Fix for acp init sequence
ASoC: amd: acp: fix module autoloading
ASoC: mediatek: mt8188: Mark AFE_DAC_CON0 register as volatile
ASoC: codecs: wcd937x: Fix missing de-assert of reset GPIO
ASoC: SOF: mediatek: Add missing board compatible
ASoC: MAINTAINERS: Drop Banajit Goswami from Qualcomm sound drivers
ASoC: SOF: amd: Fix for incorrect acp error register offsets
ASoC: SOF: amd: move iram-dram fence register programming sequence
...
ftrace_return_address() is called extremely often from
performance-critical code paths when debugging features like
CONFIG_TRACE_IRQFLAGS are enabled. For example, with debug_defconfig,
ftrace selftests on my LPAR currently execute ftrace_return_address()
as follows:
ftrace_return_address(0) - 0 times (common code uses __builtin_return_address(0) instead)
ftrace_return_address(1) - 2,986,805,401 times (with this patch applied)
ftrace_return_address(2) - 140 times
ftrace_return_address(>2) - 0 times
The use of __builtin_return_address(n) was replaced by return_address()
with an unwinder call by commit cae74ba8c2 ("s390/ftrace:
Use unwinder instead of __builtin_return_address()") because
__builtin_return_address(n) simply walks the stack backchain and doesn't
check for reaching the stack top. For shallow stacks with fewer than
"n" frames, this results in reads at low addresses and random
memory accesses.
While calling the fully functional unwinder "works", it is very slow
for this purpose. Moreover, potentially following stack switches and
walking past IRQ context is simply wrong thing to do for
ftrace_return_address().
Reimplement return_address() to essentially be __builtin_return_address(n)
with checks for reaching the stack top. Since the ftrace_return_address(n)
argument is always a constant, keep the implementation in the header,
allowing both GCC and Clang to unroll the loop and optimize it to the
bare minimum.
Fixes: cae74ba8c2 ("s390/ftrace: Use unwinder instead of __builtin_return_address()")
Cc: stable@vger.kernel.org
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since commit 778666df60 ("s390: compile relocatable kernel without
-fPIE") the kernel vmlinux ELF file is linked with --emit-relocs to
preserve all relocations, so that all absolute relocations can be
extracted using the 'relocs' tool to adjust them during boot.
Port and adapt Petr Pavlu's x86 commit 9d9173e9ce ("x86/build: Avoid
relocation information in final vmlinux") to s390 to strip all
relocations from the final vmlinux ELF file to optimize its size.
Following is his original commit message with minor adaptions for s390:
The Linux build process on s390 roughly consists of compiling all input
files, statically linking them into a vmlinux ELF file, and then taking
and turning this file into an actual bzImage bootable file.
vmlinux has in this process two main purposes:
1) It is an intermediate build target on the way to produce the final
bootable image.
2) It is a file that is expected to be used by debuggers and standard
ELF tooling to work with the built kernel.
For the second purpose, a vmlinux file is typically collected by various
package build recipes, such as distribution spec files, including the
kernel's own tar-pkg target.
When building the kernel vmlinux contains also relocation information
produced by using the --emit-relocs linker option. This is utilized by
subsequent build steps to create relocs.S and produce a relocatable
image. However, the information is not needed by debuggers and other
standard ELF tooling.
The issue is then that the collected vmlinux file and hence distribution
packages end up unnecessarily large because of this extra data. The
following is a size comparison of vmlinux v6.10 with and without the
relocation information:
| Configuration | With relocs | Stripped relocs |
| defconfig | 696 MB | 320 MB |
| -CONFIG_DEBUG_INFO | 48 MB | 32 MB |
Optimize a resulting vmlinux by adding a postlink step that splits the
relocation information into relocs.S and then strips it from the vmlinux
binary.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Now that both the kernel modules area and the kernel image itself are
located within 4 GB, there is no longer a need to maintain a separate
ftrace_plt trampoline. Use the existing trampoline in the kernel.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit d2add27cf2 ("tpm: Add NULL primary creation") introduced
CONFIG_TCG_TPM2_HMAC. When this option is enabled on ppc64 then the
following message appears in the kernel log due to a missing call to
tpm2_sessions_init().
[ 2.654549] tpm tpm0: auth session is not active
Add the missing call to tpm2_session_init() to the ibmvtpm driver to
resolve this issue.
Cc: stable@vger.kernel.org # v6.10+
Fixes: d2add27cf2 ("tpm: Add NULL primary creation")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Per Stephen Boyd's explanation in the link below, QUP RCG clocks do not
need to be parked when switching frequency. A side-effect in parking to a
lower frequency can be a momentary invalid clock driven on an in-use serial
peripheral.
This can cause "junk" to spewed out of a UART as a low-impact example. On
the x1e80100-crd this serial port junk can be observed on linux-next.
Apply a similar fix to the x1e80100 Global Clock controller to remediate.
Link: https://lore.kernel.org/all/20240819233628.2074654-3-swboyd@chromium.org/
Fixes: 161b7c401f ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Fixes: 929c75d575 ("clk: qcom: gcc-sm8550: Mark RCGs shared where applicable")
Suggested-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20240823-x1e80100-clk-fix-v1-1-0b1b4f5a96e8@linaro.org
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There may be other backup reset methods available, do not halt
here so that other reset methods can be tried.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Function register_restart_handler() is deprecated. Using this new API
removes our need to keep and manage a struct notifier_block.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Simplify probe by fetching the regmap and its arguments in one call.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use device_get_match_data() for finding the matching node and fetching
the match data all in one.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The platform_driver_probe() helper is useful when the probe function
is in the _init section, that is not the case here. Use the normal
platform_driver_register() function.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240610142836.168603-1-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Given how tortuous and fragile the whole lack-of-GICv3 story is,
add a selftest checking that we don't regress it.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently have two helpers (undef_access() and trap_undef()) that
do exactly the same thing: inject an UNDEF and return 'false' (as an
indication that PC should not be incremented).
We definitely could do with one less. Given that undef_access() is
used 80ish times, while trap_undef() is only used 30 times, the
latter loses the battle and is immediately sacrificed.
We also have a large number of instances where undef_access() is
open-coded. Let's also convert those.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We don't expect to trap any GICv3 register for host handling,
apart from ICC_SRE_EL1 and the SGI registers. If they trap,
that's because the guest is playing with us despite being
told it doesn't have a GICv3.
If it does, UNDEF is what it will get.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-10-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
On platforms that require emulation of the CPU interface, we still
need to honor the traps requested by the guest (ICH_HCR_EL2 as well
as the FGTs for ICC_IGRPEN{0,1}_EL1.
Check for these bits early and lail out if any trap applies.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-9-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The usual song and dance. Anything that is a trap, any register
it traps. Note that we don't handle the registers added by
FEAT_NMI for now.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
As we are about to describe the trap routing for ICH_HCR_EL2, add
the register to the vcpu state in its VNCR form, as well as reset
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to be consistent, we shouldn't advertise a GICv3 when none
is actually usable by the guest.
Wipe the feature when these conditions apply, and allow the field
to be written from userspace.
This now allows us to rewrite the kvm_has_gicv3 helper() in terms
of kvm_has_feat(), given that it is always evaluated at runtime.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We already have to perform a set of last-chance adjustments for
NV purposes. We will soon have to do the same for the GIC, so
introduce a helper for that exact purpose.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
On a VHE system, no GICv3 traps get configured when no irqchip is
present. This is not quite matching the "no GICv3" semantics that
we want to present.
Force such traps to be configured in this case.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We so far only write the ICH_HCR_EL2 config in two situations:
- when we need to emulate the GICv3 CPU interface due to HW bugs
- when we do direct injection, as the virtual CPU interface needs
to be enabled
This is all good. But it also means that we don't do anything special
when we emulate a GICv2, or that there is no GIC at all.
What happens in this case when the guest uses the GICv3 system
registers? The *guest* gets a trap for a sysreg access (EC=0x18)
while we'd really like it to get an UNDEF.
Fixing this is a bit involved:
- we need to set all the required trap bits (TC, TALL0, TALL1, TDIR)
- for these traps to take effect, we need to (counter-intuitively)
set ICC_SRE_EL1.SRE to 1 so that the above traps take priority.
Note that doesn't fully work when GICv2 emulation is enabled, as
we cannot set ICC_SRE_EL1.SRE to 1 (it breaks Group0 delivery as
IRQ).
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827152517.3909653-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
