Function jbd2_journal_shrink_checkpoint_list() assumes that '0' is not a
valid value for transaction IDs, which is incorrect.
Furthermore, the sbi->s_fc_ineligible_tid handling also makes the same
assumption by being initialised to '0'. Fortunately, the sb flag
EXT4_MF_FC_INELIGIBLE can be used to check whether sbi->s_fc_ineligible_tid
has been previously set instead of comparing it with '0'.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240724161119.13448-5-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Function jbd2_journal_shrink_checkpoint_list() assumes that '0' is not a
valid value for transaction IDs, which is incorrect. Don't assume that and
use two extra boolean variables to control the loop iterations and keep
track of the first and last tid.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240724161119.13448-4-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Function __jbd2_log_wait_for_space() assumes that '0' is not a valid value
for transaction IDs, which is incorrect. Don't assume that and invoke
jbd2_log_wait_commit() if the journal had a committing transaction instead.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240724161119.13448-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Function ext4_wait_for_tail_page_commit() assumes that '0' is not a valid
value for transaction IDs, which is incorrect. Don't assume that and invoke
jbd2_log_wait_commit() if the journal had a committing transaction instead.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240724161119.13448-2-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Configure supported link number by chip. And, introduce driver capability
flag for MLO. Driver should depend on runtime FW features and chip info to
determine whether to set the MLO capability flag or not. Once the MLO flag
is set, driver will consider/register/initialize things for MLO usages.
However, we just add the driver MLO capability flag ahead and don't really
set it. Then, we can start to tweak driver architecture for MLO. Some code
should depend on this flag. And after tweaking driver architecture is done,
we will set it based on runtime conditions as mentioned above.
Besides, MLD number supported by HW should be
chip supported mac_id number / chip supported link number
Without driver MLO capability flag, we allocate stations based on supported
mac_id number. With driver MLO capability flag, we allocate stations based
on supported MLD number.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-9-pkshih@realtek.com
The target enum has been renamed to rtw89_"chanctx"_idx. So for
readability, rename roc_entity_idx to roc_"chanctx"_idx to align.
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-8-pkshih@realtek.com
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8922A
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-7-pkshih@realtek.com
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8852C
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-6-pkshih@realtek.com
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8852BX
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-5-pkshih@realtek.com
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8852A
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-4-pkshih@realtek.com
No longer access chan with hard-code RTW89_CHANCTX_X whenever possible.
Instead, obtain the right chanctx from somewhere and use it in RTL8851B
RFK (RF calibration) related code.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-3-pkshih@realtek.com
Originally, all chips have implemented rfk_band_changed() and access chan
with hard-code RTW89_CHANCTX_0 in it. But, it's problematic when the chip
supports multiple channels.
So, change the prototype of rfk_band_changed() and pass chan ahead. And,
we will refine the implementation of each chip in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240819091724.33730-2-pkshih@realtek.com
Use the correct struct member name in the kernel-doc notation
to prevent a kernel-doc build warning.
include/linux/jbd2.h:1303: warning: Function parameter or struct member 'j_transaction_overhead_buffers' not described in 'journal_s'
include/linux/jbd2.h:1303: warning: Excess struct member 'j_transaction_overhead' description in 'journal_s'
Fixes: e3a00a2378 ("jbd2: precompute number of transaction descriptor blocks")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240710182252.4c281445@canb.auug.org.au/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240723051647.3053491-1-rdunlap@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Arkadiusz Kubalewski says:
====================
Add Embedded SYNC feature for a dpll's pin
Introduce and allow DPLL subsystem users to get/set capabilities of
Embedded SYNC on a dpll's pin.
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
====================
Link: https://patch.msgid.link/20240822222513.255179-1-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow the user to get and set configuration of Embedded SYNC feature
on the ice driver dpll pins.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240822222513.255179-3-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement and document new pin attributes for providing Embedded SYNC
capabilities to the DPLL subsystem users through a netlink pin-get
do/dump messages. Allow the user to set Embedded SYNC frequency with
pin-set do netlink message.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20240822222513.255179-2-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Iterate the folio's list of buffer_heads twice instead of keeping
an array of pointers. This solves a too-large-array-for-stack problem
on architectures with a ridiculoously large PAGE_SIZE and prepares
ext4 to support larger folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20240718223005.568869-3-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Instead of synchronously reading one buffer at a time, submit reads
as we walk the buffers in the first loop, then wait for them in the
second loop. This should be significantly more efficient, particularly
on HDDs, but I have not measured.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20240718223005.568869-2-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This function is very similar to do_mpage_readpage() and a similar
approach to that taken in commit 12ac5a65cb will work. As in
do_mpage_readpage(), we only use this array for checking block contiguity
and we can do that more efficiently with a little arithmetic.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://patch.msgid.link/20240718223005.568869-1-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In __jbd2_log_wait_for_space(), we might call jbd2_cleanup_journal_tail()
to recover some journal space. But if an error occurs while executing
jbd2_cleanup_journal_tail() (e.g., an EIO), we don't stop waiting for free
space right away, we try other branches, and if j_committing_transaction
is NULL (i.e., the tid is 0), we will get the following complain:
============================================
JBD2: I/O error when updating journal superblock for sdd-8.
__jbd2_log_wait_for_space: needed 256 blocks and only had 217 space available
__jbd2_log_wait_for_space: no way to get more journal space in sdd-8
------------[ cut here ]------------
WARNING: CPU: 2 PID: 139804 at fs/jbd2/checkpoint.c:109 __jbd2_log_wait_for_space+0x251/0x2e0
Modules linked in:
CPU: 2 PID: 139804 Comm: kworker/u8:3 Not tainted 6.6.0+ #1
RIP: 0010:__jbd2_log_wait_for_space+0x251/0x2e0
Call Trace:
<TASK>
add_transaction_credits+0x5d1/0x5e0
start_this_handle+0x1ef/0x6a0
jbd2__journal_start+0x18b/0x340
ext4_dirty_inode+0x5d/0xb0
__mark_inode_dirty+0xe4/0x5d0
generic_update_time+0x60/0x70
[...]
============================================
So only if jbd2_cleanup_journal_tail() returns 1, i.e., there is nothing to
clean up at the moment, continue to try to reclaim free space in other ways.
Note that this fix relies on commit 6f6a6fda29 ("jbd2: fix ocfs2 corrupt
when updating journal superblock fails") to make jbd2_cleanup_journal_tail
return the correct error code.
Fixes: 8c3f25d895 ("jbd2: don't give up looking for space so easily in __jbd2_log_wait_for_space")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240718115336.2554501-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The following kernel trace can be triggered with fstest generic/629 when
executed against a filesystem with fast-commit feature enabled:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x66/0x90
register_lock_class+0x759/0x7d0
__lock_acquire+0x85/0x2630
? __find_get_block+0xb4/0x380
lock_acquire+0xd1/0x2d0
? __ext4_journal_get_write_access+0xd5/0x160
_raw_spin_lock+0x33/0x40
? __ext4_journal_get_write_access+0xd5/0x160
__ext4_journal_get_write_access+0xd5/0x160
ext4_reserve_inode_write+0x61/0xb0
__ext4_mark_inode_dirty+0x79/0x270
? ext4_ext_replay_set_iblocks+0x2f8/0x450
ext4_ext_replay_set_iblocks+0x330/0x450
ext4_fc_replay+0x14c8/0x1540
? jread+0x88/0x2e0
? rcu_is_watching+0x11/0x40
do_one_pass+0x447/0xd00
jbd2_journal_recover+0x139/0x1b0
jbd2_journal_load+0x96/0x390
ext4_load_and_init_journal+0x253/0xd40
ext4_fill_super+0x2cc6/0x3180
...
In the replay path there's an attempt to lock sbi->s_bdev_wb_lock in
function ext4_check_bdev_write_error(). Unfortunately, at this point this
spinlock has not been initialized yet. Moving it's initialization to an
earlier point in __ext4_fill_super() fixes this splat.
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Link: https://patch.msgid.link/20240718094356.7863-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
When a full journal commit is on-going, any fast commit has to be enqueued
into a different queue: FC_Q_STAGING instead of FC_Q_MAIN. This enqueueing
is done only once, i.e. if an inode is already queued in a previous fast
commit entry it won't be enqueued again. However, if a full commit starts
_after_ the inode is enqueued into FC_Q_MAIN, the next fast commit needs to
be done into FC_Q_STAGING. And this is not being done in function
ext4_fc_track_template().
This patch fixes the issue by re-enqueuing an inode into the STAGING queue
during the fast commit clean-up callback when doing a full commit. However,
to prevent a race with a fast-commit, the clean-up callback has to be called
with the journal locked.
This bug was found using fstest generic/047. This test creates several 32k
bytes files, sync'ing each of them after it's creation, and then shutting
down the filesystem. Some data may be loss in this operation; for example a
file may have it's size truncated to zero.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240717172220.14201-1-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Syzbot has found an ODEBUG bug in ext4_fill_super
The del_timer_sync function cancels the s_err_report timer,
which reminds about filesystem errors daily. We should
guarantee the timer is no longer active before kfree(sbi).
When filesystem mounting fails, the flow goes to failed_mount3,
where an error occurs when ext4_stop_mmpd is called, causing
a read I/O failure. This triggers the ext4_handle_error function
that ultimately re-arms the timer,
leaving the s_err_report timer active before kfree(sbi) is called.
Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd.
Signed-off-by: Xiaxi Shen <shenxiaxi26@gmail.com>
Reported-and-tested-by: syzbot+59e0101c430934bc9a36@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=59e0101c430934bc9a36
Link: https://patch.msgid.link/20240715043336.98097-1-shenxiaxi26@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Single characters (line breaks) should be put into a sequence.
Thus use the corresponding function “seq_putc”.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/076974ab-4da3-4176-89dc-0514e020c276@web.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This was caught as a very rare nonce inconsistency, on systems with
encryption and replication (and tiering, or some form of rebalance
operation running):
[Wed Jul 17 13:30:03 2024] about to insert invalid key in data update path
[Wed Jul 17 13:30:03 2024] old: u64s 10 type extent 671283510:6392:U32_MAX len 16 ver 106595503: durability: 2 crc: c_size 8 size 16 offset 0 nonce 0 csum chacha20_poly1305_80 compress zstd ptr: 3:355968:104 gen 7 ptr: 4:513244:48 gen 6 rebalance: target hdd compression zstd
[Wed Jul 17 13:30:03 2024] k: u64s 10 type extent 671283510:6400:U32_MAX len 16 ver 106595508: durability: 2 crc: c_size 8 size 16 offset 0 nonce 0 csum chacha20_poly1305_80 compress zstd ptr: 3:355968:112 gen 7 ptr: 4:513244:56 gen 6 rebalance: target hdd compression zstd
[Wed Jul 17 13:30:03 2024] new: u64s 14 type extent 671283510:6392:U32_MAX len 8 ver 106595508: durability: 2 crc: c_size 8 size 16 offset 0 nonce 0 csum chacha20_poly1305_80 compress zstd ptr: 3:355968:112 gen 7 cached ptr: 4:513244:56 gen 6 cached rebalance: target hdd compression zstd crc: c_size 8 size 16 offset 8 nonce 0 csum chacha20_poly1305_80 compress zstd ptr: 1:10860085:32 gen 0 ptr: 0:17285918:408 gen 0
[Wed Jul 17 13:30:03 2024] bcachefs (cca5bc65-fe77-409d-a9fa-465a6e7f4eae): fatal error - emergency read only
bch2_extents_match() was reporting true for extents that did not
actually point to the same data.
bch2_extent_match() iterates over pairs of pointers, looking for
pointers that point to the same location on disk (with matching
generation numbers). However one or both extents may have been trimmed
(or merged) and they might not have the same disk offset: it corrects
for this by subtracting the key offset and the checksum entry offset.
However, this failed when an extent was immediately partially
overwritten, and the new overwrite was allocated the next adjacent disk
space.
Normally, with compression off, this would never cause a bug, since the
new extent would have to be immediately after the old extent for the
pointer offsets to match, and the rebalance index update path is not
looking for an extent outside the range of the extent it moved.
However with compression enabled, extents take up less space on disk
than they do in the btree index space - and spuriously matching after
partial overwrite is possible.
To fix this, add a secondary check, that strictly checks that the
regions pointed to on disk overlap.
https://github.com/koverstreet/bcachefs/issues/717
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes an assertion pop in io_write.c - if we don't return an error
we're supposed to have completed all the btree updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
[BUG]
There is an internal report that KASAN is reporting use-after-free, with
the following backtrace:
BUG: KASAN: slab-use-after-free in btrfs_check_read_bio+0xa68/0xb70 [btrfs]
Read of size 4 at addr ffff8881117cec28 by task kworker/u16:2/45
CPU: 1 UID: 0 PID: 45 Comm: kworker/u16:2 Not tainted 6.11.0-rc2-next-20240805-default+ #76
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
Call Trace:
dump_stack_lvl+0x61/0x80
print_address_description.constprop.0+0x5e/0x2f0
print_report+0x118/0x216
kasan_report+0x11d/0x1f0
btrfs_check_read_bio+0xa68/0xb70 [btrfs]
process_one_work+0xce0/0x12a0
worker_thread+0x717/0x1250
kthread+0x2e3/0x3c0
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x11/0x20
Allocated by task 20917:
kasan_save_stack+0x37/0x60
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x7d/0x80
kmem_cache_alloc_noprof+0x16e/0x3e0
mempool_alloc_noprof+0x12e/0x310
bio_alloc_bioset+0x3f0/0x7a0
btrfs_bio_alloc+0x2e/0x50 [btrfs]
submit_extent_page+0x4d1/0xdb0 [btrfs]
btrfs_do_readpage+0x8b4/0x12a0 [btrfs]
btrfs_readahead+0x29a/0x430 [btrfs]
read_pages+0x1a7/0xc60
page_cache_ra_unbounded+0x2ad/0x560
filemap_get_pages+0x629/0xa20
filemap_read+0x335/0xbf0
vfs_read+0x790/0xcb0
ksys_read+0xfd/0x1d0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 20917:
kasan_save_stack+0x37/0x60
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x50
__kasan_slab_free+0x4b/0x60
kmem_cache_free+0x214/0x5d0
bio_free+0xed/0x180
end_bbio_data_read+0x1cc/0x580 [btrfs]
btrfs_submit_chunk+0x98d/0x1880 [btrfs]
btrfs_submit_bio+0x33/0x70 [btrfs]
submit_one_bio+0xd4/0x130 [btrfs]
submit_extent_page+0x3ea/0xdb0 [btrfs]
btrfs_do_readpage+0x8b4/0x12a0 [btrfs]
btrfs_readahead+0x29a/0x430 [btrfs]
read_pages+0x1a7/0xc60
page_cache_ra_unbounded+0x2ad/0x560
filemap_get_pages+0x629/0xa20
filemap_read+0x335/0xbf0
vfs_read+0x790/0xcb0
ksys_read+0xfd/0x1d0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[CAUSE]
Although I cannot reproduce the error, the report itself is good enough
to pin down the cause.
The call trace is the regular endio workqueue context, but the
free-by-task trace is showing that during btrfs_submit_chunk() we
already hit a critical error, and is calling btrfs_bio_end_io() to error
out. And the original endio function called bio_put() to free the whole
bio.
This means a double freeing thus causing use-after-free, e.g.:
1. Enter btrfs_submit_bio() with a read bio
The read bio length is 128K, crossing two 64K stripes.
2. The first run of btrfs_submit_chunk()
2.1 Call btrfs_map_block(), which returns 64K
2.2 Call btrfs_split_bio()
Now there are two bios, one referring to the first 64K, the other
referring to the second 64K.
2.3 The first half is submitted.
3. The second run of btrfs_submit_chunk()
3.1 Call btrfs_map_block(), which by somehow failed
Now we call btrfs_bio_end_io() to handle the error
3.2 btrfs_bio_end_io() calls the original endio function
Which is end_bbio_data_read(), and it calls bio_put() for the
original bio.
Now the original bio is freed.
4. The submitted first 64K bio finished
Now we call into btrfs_check_read_bio() and tries to advance the bio
iter.
But since the original bio (thus its iter) is already freed, we
trigger the above use-after free.
And even if the memory is not poisoned/corrupted, we will later call
the original endio function, causing a double freeing.
[FIX]
Instead of calling btrfs_bio_end_io(), call btrfs_orig_bbio_end_io(),
which has the extra check on split bios and do the proper refcounting
for cloned bios.
Furthermore there is already one extra btrfs_cleanup_bio() call, but
that is duplicated to btrfs_orig_bbio_end_io() call, so remove that
label completely.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: 852eee62d3 ("btrfs: allow btrfs_submit_bio to split bios")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In aperture_remove_conflicting_pci_devices(), we currently only
call sysfb_disable() on vga class devices. This leads to the
following problem when the pimary device is not VGA compatible:
1. A PCI device with a non-VGA class is the boot display
2. That device is probed first and it is not a VGA device so
sysfb_disable() is not called, but the device resources
are freed by aperture_detach_platform_device()
3. Non-primary GPU has a VGA class and it ends up calling sysfb_disable()
4. NULL pointer dereference via sysfb_disable() since the resources
have already been freed by aperture_detach_platform_device() when
it was called by the other device.
Fix this by passing a device pointer to sysfb_disable() and checking
the device to determine if we should execute it or not.
v2: Fix build when CONFIG_SCREEN_INFO is not set
v3: Move device check into the mutex
Drop primary variable in aperture_remove_conflicting_pci_devices()
Drop __init on pci sysfb_pci_dev_is_enabled()
Fixes: 5ae3716cfd ("video/aperture: Only remove sysfb on the default vga pci device")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821191135.829765-1-alexander.deucher@amd.com
Because these are equals to MAX_LSM_COUNT. Also, we can avoid dynamic
memory allocation for ordered_lsms because MAX_LSM_COUNT is a constant.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The function ata_schedule_scsi_eh() was removed with commit
f8bbfc247e ("[PATCH] SCSI: make scsi_implement_eh() generic API for
SCSI transports"), and the function ata_sff_irq_clear() was removed
with commit 37f65b8bc262("libata-sff: ata_sff_irq_clear() is BMDMA
specific").
Remove the now useless declarations of these functions in
drivers/ata/libata.h and include/linux/libata.h.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Currently, we copy the mtime and ctime to the in-core inode and then
mark the inode dirty. This is fine for certain types of filesystems, but
not all. Some require a real setattr to properly change these values
(e.g. ceph or reexported NFS).
Fix this code to call notify_change() instead, which is the proper way
to effect a setattr. There is one problem though:
In this case, the client is holding a write delegation and has sent us
attributes to update our cache. We don't want to break the delegation
for this since that would defeat the purpose. Add a new ATTR_DELEG flag
that makes notify_change bypass the try_break_deleg call.
Fixes: c5967721e1 ("NFSD: handle GETATTR conflict with write delegation")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If the commands allocation fails in nvmet_tcp_alloc_cmds()
the kernel crashes in nvmet_tcp_release_queue_work() because of
a NULL pointer dereference.
nvmet: failed to install queue 0 cntlid 1 ret 6
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000008
Fix the bug by setting queue->nr_cmds to zero in case
nvmet_tcp_alloc_cmd() fails.
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The goo.gl URL shortener is deprecated and is due to stop
expanding existing links in 2025.
The old goo.gl link in the 9p docs doesn't work anyway,
replace it by a kernel.org link suggested by Randy instead.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240725180041.80862-1-linux@treblig.org
KCSAN flags the check of isec->initialized by
__inode_security_revalidate() as a data race. This is indeed a racy
check, but inode_doinit_with_dentry() will recheck with isec->lock held.
Annotate the check with the data_race() macro to silence the KCSAN false
positive.
Reported-by: syzbot+319ed1769c0078257262@syzkaller.appspotmail.com
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The menu for documents of other available languages is created for
documents in same file hierarchy under the translations/ directory.
Because memory-barriers.txt of Korean translation is at the root index
of translations/ directory while that for English is on
core-api/wrappers/memory-barriers.rst, the Korean translation is not
linked with other available language versions via the menu. Move the
document under the same directory hierarchy to make it linked with other
language versions.
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240826010949.78305-2-sj@kernel.org
The menu for documents of other available languages is created for
documents in same file hierarchy under the translations/ directory.
Because howto.rst of Korean translation is at the root of translations/
directory while that for English is under howto/ directory, the Korean
translation is not linked with other available language versions via the
menu. Move the document under the same hierarchy to make it be linked
with other langauge versions.
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240826010949.78305-1-sj@kernel.org
The previous update to enable the workaround on ARL only changed two
out of three places where the w/a needs to be enabled. That meant the
GuC side was operational but not the KMD side. And as the KMD side is
the trigger, it meant the w/a was not actually active. So fix that.
Fixes: 104bcfae57 ("drm/i915/arl: Enable Wa_14019159160 for ARL")
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809000646.1747507-1-John.C.Harrison@Intel.com
Crash is seen on AM64x 10M link when connecting / disconnecting multiple
times.
The fix for this is to enable quirk_10m_link_issue for AM64x.
Fixes: b256e13378 ("net: ti: icssg-prueth: Add AM64x icssg support")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240823120412.1262536-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the function dpaa_napi_del(), we execute the netif_napi_del()
for each cpu, which is actually a high overhead operation
because each call to netif_napi_del() contains a synchronize_net(),
i.e. an RCU operation. In fact, it is only necessary to call
__netif_napi_del and use synchronize_net() once outside of the loop.
This change is similar to commit 2543a6000e ("gro_cells: reduce
number of synchronize_net() calls") and commit 5198d545db (" net:
remove napi_hash_del() from driver-facing API") 5198d545db.
Signed-off-by: Xi Huang <xuiagnh@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240822072042.42750-1-xuiagnh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update bug reporting info in bug-hunting.rst to direct people to
driver/subsystem bug trackers, if explicitly specified with the
MAINTAINERS "B:" entry. Use the new get_maintainer.pl --bug option to
print the info.
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240815113450.3397499-2-jani.nikula@intel.com
For example Documentation/adming-guide/bug-hunting.rst suggest using
get_maintainer.pl to get a list of maintainers and mailing lists to
report bugs to, while a number of subsystems and drivers explicitly use
the "B:" MAINTAINERS entry to direct bug reports at issue trackers
instead of mailing lists and people.
Add the --bug option to get_maintainer.pl to print the bug reporting
URIs, if any.
Cc: Joe Perches <joe@perches.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240815113450.3397499-1-jani.nikula@intel.com
Upstream Rust's libs-api team has consensus for stabilizing some of
`feature(new_uninit)`, but not for `Box<MaybeUninit<T>>::write`. Instead,
we can use `MaybeUninit<T>::write`, so Rust for Linux can drop the
feature after stabilization. That will happen after merging, as the FCP
has completed [1].
This is required before stabilization because remaining-unstable API
will be divided into new features. This code doesn't know about those
yet. It can't: they haven't landed, as the relevant PR is blocked on
rustc's CI testing Rust-for-Linux without this patch.
[ The PR has landed [2] and will be released in Rust 1.82.0 (expected on
2024-10-17), so we could conditionally enable the new unstable feature
(`box_uninit_write` [3]) instead, but just for a single `unsafe` block
it is probably not worth it. For the time being, I added it to the
"nice to have" section of our unstable features list. - Miguel ]
Link: https://github.com/rust-lang/rust/issues/63291#issuecomment-2183022955 [1]
Link: https://github.com/rust-lang/rust/pull/129416 [2]
Link: https://github.com/rust-lang/rust/issues/129397 [3]
Signed-off-by: Jubilee Young <workingjubilee@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In ata_host_alloc(), if devres_alloc() fails to allocate the device host
resource data pointer, the already allocated ata_host structure is not
freed before returning from the function. This results in a potential
memory leak.
Call kfree(host) before jumping to the error handling path to ensure
that the ata_host structure is properly freed if devres_alloc() fails.
Fixes: 2623c7a5f2 ("libata: add refcounting to ata_host")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
