Li Zetao says:
====================
Some modifications to optimize code readability
This patchset is mainly optimized for readability in contexts where size
needs to be determined. By using min() or max(), or even directly
removing redundant judgments (such as the 5th patch), the code is more
consistent with the context.
====================
Link: https://patch.msgid.link/20240822133908.1042240-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When calculating size of own domain based on number of peers, the result
should be less than MAX_MON_DOMAIN, so using min() here is very semantic.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-8-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When coping sockaddr in ip6_mc_msfget(), the time of copies
depends on the minimum value between sl_count and gf_numsrc.
Using min() here is very semantic.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-7-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When processing the tail append of sk buffer, the final length needs
to be determined based on expectlen and addlen. Using max() here can
increase the readability of the code.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822133908.1042240-4-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report NVM version numbers (both detected and expected) when a mismatch b/w
driver and firmware is detected. This provides more useful information
about which NVM version the driver expects, rather than requiring manual
code inspection.
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver allocates a cmd_buf array in addition to the desc_buf array.
This array stores an ice_sq_cd command details structure for each entry in
the control queue ring.
The contents of the structure are copied from the value passed in via
ice_sq_send_cmd, and include only a pointer to storage for the write back
descriptor contents.
Originally this array was intended to support asynchronous completion
including features such as a callback function. This support was never
implemented. All that exists today is needless copying and resetting of a
cmd_buf array that is otherwise functionally unused.
Since we do not plan to implement asynchronous completions, drop this
unnecessary memory and logic. This saves memory for each control queue, and
avoids the pointless copying and memset.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Many comments in ice_controlq.c use the term "Admin queue" despite the code
being intended for arbitrary control queues, not just the Admin queue.
Reword the comments to make it clear that this code is the generic control
queue logic that is shared by all of the control queues, and is not
specific to the Admin queue.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_debug_cq() function is called to generate a debug log of control
queue messages both sent and received. It currently does this over a
potential total of 6 different printk invocations.
The main logic prints over 4 calls to ice_debug():
1. The metadata including opcode, flags, datalength and return value.
2. The cookie in the descriptor.
3. The parameter values.
4. The address for the databuffer.
In addition, if the descriptor has a data buffer, it can be logged with two
additional prints:
5. A message indicating the start of the data buffer.
6. The actual data buffer, printed using print_hex_dump_debug.
This can lead to trouble in the event that two different PFs are logging
messages. The messages become intermixed and it may not be possible to
determine which part of the output belongs to which control queue message.
To fix this, it needs to be possible to unambiguously determine which
messages belong together. This is trivial for the messages that comprise
the main printing. Combine them together into a single invocation of
ice_debug().
The message containing a hex-dump of the data buffer is a bit more
complicated. This is printed separately as part of print_hex_dump_debug.
This function takes a prefix, which is currently always set to
KBUILD_MODNAME. Extend this prefix to include the buffer address for the
databuffer, which is printed as part of the main print, and which is
guaranteed to be unique for each buffer.
Refactor the ice_debug_array(), introducing an ice_debug_array_w_prefix().
Build the prefix by combining KBUILD_MODNAME with the databuffer address
using snprintf().
These changes make it possible to unambiguously determine what data belongs
to what control queue message.
Reported-by: Jacek Wierzbicki <jacek.wierzbicki@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, debug logs are unnecessarily cluttered with the contents of
command data buffers even if the receiver of that command (i.e. FW or MBX)
are not told to read the buffer. Change to only log command data buffers
when the RD flag (indicates receiver needs to read the buffer) is set.
Continue to log response data buffer when the returned datalen is non-zero.
Also, rename a local variable to reflect what is in the hardware
specification and how it is used elsewhere in the code, use local variables
instead of duplicating endian conversions unnecessarily and remove an
unnecessary assignment.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_debug_cq function is called to print debug data for a control queue
descriptor in multiple places. This includes both before we send a message
on a transmit queue, after the writeback completion of a message on the
transmit queue, and when we receive a message on a receive queue.
This function does not include data about *which* control queue the message
is on, nor whether it was what we sent to the queue or what we received
from the queue.
Modify ice_debug_cq to take two extra parameters, a pointer to the control
queue and a boolean indicating if this was a response or a command. Improve
the debug messages by replacing "CQ CMD" with a string indicating which
specific control queue (based on cq->qtype) and whether this was a command
sent by the PF or a response from the queue.
This helps make the log output easier to understand and consume when
debugging.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Simon Horman says:
====================
net: header and core spelling corrections
This patchset addresses a number of spelling errors in comments in
Networking files under include/, and files in net/core/. Spelling
problems are as flagged by codespell.
It aims to provide patches that can be accepted directly into net-next.
And splits patches up based on maintainer boundaries: many things
feed directly into net-next. This is a complex process and I apologise
for any errors.
I also plan to address, via separate patches, spelling errors in other
files in the same directories, for files whose changes typically go
through trees other than net-next (which feed into net-next).
====================
Link: https://patch.msgid.link/20240822-net-spell-v1-0-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling in sctp.h and structs.h.
As reported by codespell.
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20240822-net-spell-v1-10-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling in NFC headers.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-8-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling in if_rmnet.h
As reported by codespell.
Cc: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Link: https://patch.msgid.link/20240822-net-spell-v1-6-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling in bond_3ad.h and bond_alb.h.
As reported by codespell.
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-5-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct spelling in iucv.h
As reported by codespell.
Cc: Alexandra Winter <wintera@linux.ibm.com>
Cc: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822-net-spell-v1-2-3a98971ce2d2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for dumping PA stats registers via ethtool.
Firmware maintained stats are stored at PA Stats registers.
Also modify emac_get_strings() API to use ethtool_puts().
This commit also maintains consistency between miig_stats and pa_stats by
- renaming the array icssg_all_stats to icssg_all_miig_stats
- renaming the structure icssg_stats to icssg_miig_stats
- renaming ICSSG_STATS() to ICSSG_MIIG_STATS()
- changing order of stats related data structures and arrays so that data
structures of a certain stats type is clubbed together.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240822122652.1071801-3-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation for pa-stats node which is syscon regmap for
PA_STATS registers. This will be used to dump statistics maintained by
ICSSG firmware.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240822122652.1071801-2-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_sq_done function is used to check the control queue head register
and determine whether or not the control queue processing is done. This
function is called in a loop checking against jiffies for a specified
timeout.
The pattern of reading a register in a loop until a condition is true or a
timeout is reached is a relatively common pattern. In fact, the kernel
provides a read_poll_timeout function implementing this behavior in
<linux/iopoll.h>
Use of read_poll_timeout is preferred over directly coding these loops.
However, using it in the ice driver is a bit more difficult because of the
rd32 wrapper. Implement a rd32_poll_timeout wrapper based on
read_poll_timeout.
Refactor ice_sq_done to use rd32_poll_timeout, replacing the loop calling
ice_sq_done in ice_sq_send_cmd. This simplifies the logic down to a single
ice_sq_done() call.
The implementation of rd32_poll_timeout uses microseconds for its timeout
value, so update the CQ timeout macros used to be specified in microseconds
units as well instead of using HZ for jiffies.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Oleksij Rempel says:
====================
Add ALCD Support to Cable Testing Interface
This patch series introduces support for Active Link Cable Diagnostics
(ALCD) in the ethtool cable testing interface and the DP83TD510 PHY
driver.
Why ALCD?
On a 10BaseT1L interface, TDR (Time Domain Reflectometry) is not
possible if the link partner is active - TDR will fail in these cases
because it requires interrupting the link. Since the link is active, we
already know the cable is functioning, so instead of using TDR, we can
use ALCD.
ALCD lets us measure cable length without disrupting the active link,
which is crucial in environments where network uptime is important. It
provides a way to gather diagnostic data without the need for downtime.
What's in this series:
- Extended the ethtool cable testing interface to specify the source of
diagnostic results (TDR or ALCD).
- Updated the DP83TD510 PHY driver to use ALCD when the link is
active, ensuring we can still get cable length info without dropping the
connection.
====================
Link: https://patch.msgid.link/20240822120703.1393130-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In industrial environments where 10BaseT1L PHYs are replacing existing
field bus systems like CAN, it's often essential to retain the existing
cable infrastructure. After installation, collecting metrics such as
cable length is crucial for assessing the quality of the infrastructure.
Traditionally, TDR (Time Domain Reflectometry) is used for this purpose.
However, TDR requires interrupting the link, and if the link partner
remains active, the TDR measurement will fail.
Unlike multi-pair systems, where TDR can be attempted during the MDI-X
switching window, 10BaseT1L systems face greater challenges. The TDR
sequence on 10BaseT1L is longer and coincides with uninterrupted
autonegotiation pulses, making TDR impossible when the link partner is
active.
The DP83TD510 PHY provides an alternative through ALCD (Active Link
Cable Diagnostics), which allows for cable length measurement without
disrupting an active link. Since a live link indicates no short or open
cable states, ALCD can be used effectively to gather cable length
information.
Enhance the dp83td510 driver by:
- Leveraging ALCD to measure cable length when the link is active.
- Bypassing TDR when a link is detected, as ALCD provides the required
information without disruption.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enhance the ethtool cable test interface by introducing the ability to
specify the source of the diagnostic information for cable test results.
This is particularly useful for PHYs that offer multiple diagnostic
methods, such as Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD).
Key changes:
- Added `ethnl_cable_test_result_with_src` and
`ethnl_cable_test_fault_length_with_src` functions to allow specifying
the information source when reporting cable test results.
- Updated existing `ethnl_cable_test_result` and
`ethnl_cable_test_fault_length` functions to use TDR as the default
source, ensuring backward compatibility.
- Modified the UAPI to support these new attributes, enabling drivers to
provide more detailed diagnostic information.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the ethtool netlink cable testing interface by adding support for
specifying the source of cable testing results. This allows users to
differentiate between results obtained through different diagnostic
methods.
For example, some TI 10BaseT1L PHYs provide two variants of cable
diagnostics: Time Domain Reflectometry (TDR) and Active Link Cable
Diagnostic (ALCD). By introducing `ETHTOOL_A_CABLE_RESULT_SRC` and
`ETHTOOL_A_CABLE_FAULT_LENGTH_SRC` attributes, this update enables
drivers to indicate whether the result was derived from TDR or ALCD,
improving the clarity and utility of diagnostic information.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240822120703.1393130-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for Surface Laptop 7 machines, based on X1E80100.
The feature status is mostly on par with other X Elite machines,
notably lacking:
- USB-A and probably USB-over-Surface-connector (pending NXP retimer
support)
- SD card reader (Realtek RTS5261 connected over PCIe)
- Touchscreen and touchpad support (hid-over-SPI [1])
- Audio (a quick look suggests the setup is very close to the one in
X1E CRD)
The two Surface Laptop 7 SKUs (13.8" and 15") only have very minor
differences, amounting close to none on the software side. Even the
MBN firmware files and ACPI tables are shared between the two machines.
With that in mind, support is added for both, although only the larger
one was physically tested. Display differences will be taken care of
through fused-in EDID and other matters should be solved within the
EC and boot firmware.
[1] https://www.microsoft.com/en-us/download/details.aspx?id=103325
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Link: https://lore.kernel.org/r/20240826-topic-sl7-v2-5-c32ebae78789@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
GENI SE2 within QUP0 is used as UART on some devices, describe it.
While at it, rewrite the adjacent UART21 pins node to make it more
easily modifiable.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Link: https://lore.kernel.org/r/20240826-topic-sl7-v2-4-c32ebae78789@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the X1E80100-based Microsoft laptops.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826-topic-sl7-v2-1-c32ebae78789@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Adds a selftest that creates two virtual interfaces, assigns one to a
new namespace, and assigns IP addresses to both.
It listens on the destination interface using socat and configures a
dynamic target on netconsole, pointing to the destination IP address.
The test then checks if the message was received properly on the
destination interface.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240822095652.3806208-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
netconsole: Populate dynamic entry even if netpoll fails
The current implementation of netconsole removes the entry and fails
entirely if netpoll fails to initialize. This approach is suboptimal, as
it prevents reconfiguration or re-enabling of the target through
configfs.
While this issue might seem minor if it were rare, it actually occurs
frequently when the network module is configured as a loadable module.
In such cases, the network is unavailable when netconsole initializes,
causing netpoll to fail. This failure forces users to reconfigure the
target from scratch, discarding any settings provided via the command
line.
The proposed change would keep the target available in configfs, albeit
in a disabled state. This modification allows users to adjust settings
or simply re-enable the target once the network module has loaded,
providing a more flexible and user-friendly solution.
v2: https://lore.kernel.org/20240819103616.2260006-1-leitao@debian.org
v1: https://lore.kernel.org/20240809161935.3129104-1-leitao@debian.org
====================
Link: https://patch.msgid.link/20240822111051.179850-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, netconsole discards targets that fail during initialization,
causing two issues:
1) Inconsistency between target list and configfs entries
* user pass cmdline0, cmdline1. If cmdline0 fails, then cmdline1
becomes cmdline0 in configfs.
2) Inability to manage failed targets from userspace
* If user pass a target that fails with netpoll (interface not loaded at
netcons initialization time, such as interface is a module), then
the target will not exist in the configfs, so, user cannot re-enable
or modify it from userspace.
Failed targets are now added to the target list and configfs, but
remain disabled until manually enabled or reconfigured. This change does
not change the behaviour if CONFIG_NETCONSOLE_DYNAMIC is not set.
CC: Aijay Adams <aijay@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240822111051.179850-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify netpoll_setup() and __netpoll_setup() to ensure that the netpoll
structure (np) is left in a clean state if setup fails for any reason.
This prevents carrying over misconfigured fields in case of partial
setup success.
Key changes:
- np->dev is now set only after successful setup, ensuring it's always
NULL if netpoll is not configured or if netpoll_setup() fails.
- np->local_ip is zeroed if netpoll setup doesn't complete successfully.
- Added DEBUG_NET_WARN_ON_ONCE() checks to catch unexpected states.
- Reordered some operations in __netpoll_setup() for better logical flow.
These changes improve the reliability of netpoll configuration, since it
assures that the structure is fully initialized or totally unset.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240822111051.179850-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On some NXP platforms (e.g i.MX7ULP) the poweroff and reboot operations
are done via a separate remote core.
Typically Linux needs to send a message to the remote core and requests
for poweroff or reboot.
By default the communication between Linux core and the remote core is
is done via a blocking mailbox mechanism but Linux doesn't allow blocking
operations in the system off (reboot, power off) handlers.
So, we need to make sure the mailbox message send operations do not block
for this specific operations. Fortunately, Linux allows us to register
handlers that are called in preparation of the system off operations.
Thus, before carrying the power off or reboot preparations, just destroy
the existing mailboxes and create them as non-blocking.
Note that power off and restart are totally different operations and are
not complementary.
We introduce a new flag in the imx remoteproc per device data which tells
us when a device needs this special setup. For now, only imx7ulp needs it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240822-imx_rproc-v3-2-6d943723945d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Current mailbox is blocking by default, but there are cases where we don't
need to wait for a response.
Linux just needs to send data to the remote processor, so let's
allow tx_block mode to be set (true/false) depending on usecase.
No functional changes.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240822-imx_rproc-v3-1-6d943723945d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The LAN887x is a Single-Port Ethernet Physical Layer Transceiver compliant
with the IEEE 802.3bw (100BASE-T1) and IEEE 802.3bp (1000BASE-T1)
specifications. The device provides 100/1000 Mbit/s transmit and receive
capability over a single Unshielded Twisted Pair (UTP) cable. It supports
communication with an Ethernet MAC via standard RGMII/SGMII interfaces.
LAN887x supports following features,
- Events/Interrupts
- LED/GPIO Operation
- IEEE 1588 (PTP)
- SQI
- Sleep and Wakeup (TC10)
- Cable Diagnostics
First patch only supports 100Mbps and 1000Mbps force-mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Link: https://patch.msgid.link/20240821055906.27717-3-Divya.Koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adds support in phy library to accept autoneg configuration only when
feature is enabled in supported list.
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240821055906.27717-2-Divya.Koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btintel: Allow configuring drive strength of BRI
- hci_core: Fix not handling hibernation actions
- btnxpuart: Fix random crash seen while removing driver
-----BEGIN PGP SIGNATURE-----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=m4CK
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btintel: Allow configuring drive strength of BRI
- hci_core: Fix not handling hibernation actions
- btnxpuart: Fix random crash seen while removing driver
* tag 'for-net-2024-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix not handling hibernation actions
Bluetooth: btnxpuart: Fix random crash seen while removing driver
Bluetooth: btintel: Allow configuring drive strength of BRI
====================
Link: https://patch.msgid.link/20240823200008.65241-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once we drop the delegation reference, the fields embedded in it are no
longer safe to access. Do that last.
Fixes: c5967721e1 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Once we've dropped the flc_lock, there is nothing that ensures that the
delegation that was found will still be around later. Take a reference
to it while holding the lock and then drop it when we've finished with
the delegation.
Fixes: c5967721e1 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
