Arnd is no longer actively maintaining Cell, mark it as orphan.
Also drop the dead developerworks link.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240726123322.1165562-1-mpe@ellerman.id.au
Convert binding doc tlv320aic31xx.txt to yaml format.
Additional change:
- add i2c node in example.
- replace MICBIAS_OFF with MICBIAS_2_0v in example because MICBIAS_OFF have
been defined in header file.
- add ref to dai-common.yaml.
- add #sound-dai-cells.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a30000/codec@18:
failed to match any schema with compatible: ['ti,tlv320dac3100']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240814174422.4026100-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Intel platforms have enabled 4 links since the beginning, newer
platforms now have 5 links. Update the definition accordingly.
This patch will have no effect on older platforms where the number of
links was hard-coded. A follow-up patch will add a dynamic check that
the ACPI-reported information is aligned with hardware capabilities on
newer platforms.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240819005548.5867-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add
a probe-time check to make sure the ACPI-reported information with
_DSD properties is aligned with hardware capabilities reported in the
SoundWire LCAP register.
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240819005548.5867-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The definitions are currently duplicated in intel-sdw-acpi.c and
sof_sdw.c. Move the definition to the sdw_intel.h header, and change
the prefix to make it Intel-specific.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240819005548.5867-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SMU metrics table has been revised for the 1AH family series.
Introduce a new metrics table structure to retrieve comprehensive metrics
information from the PMFW. This information will be utilized by the PMF
driver to adjust system thermals.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240819063404.378061-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The CPU ID macros are needed by the Smart PC builder. Therefore, transfer
the CPU ID macros from core.c to the common PMF header file.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240819063404.378061-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The APMF function 14 (Notify Smart PC Solution Updates) allows the BIOS
(AMD/OEM) to be informed about the outputs of custom Smart PC policies.
Enhance the PMF driver to invoke APMF function 14 when these custom policy
outputs are triggered.
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20240812131839.308768-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
pmc_for_each_mode() takes i (index) variable name as a parameter but
the loop index is not used by any of the callers. Make the index
variable internal to pmc_for_each_mode().
This also changes the loop logic such that ->lpm_en_modes[] is never
read beyond num_lpm_modes.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240806083047.1562-1-ilpo.jarvinen@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This removes the need to explicitly export all symbols.
Generate helper exports similarly to what's currently done for Rust
crates. These helpers are exclusively called from within Rust code and
therefore can be treated similar as other Rust symbols.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240817165302.3852499-1-gary@garyguo.net
[ Fixed dependency path, reworded slightly, edited comment a bit and
rebased on top of the changes made when applying Andreas' patch
(e.g. no `README.md` anymore, so moved the edits). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Hangbin Liu says:
====================
selftests: Fix udpgro failures
There are 2 issues for the current udpgro test. The first one is the testing
doesn't record all the failures, which may report pass but the test actually
failed. e.g.
https://netdev-3.bots.linux.dev/vmksft-net/results/725661/45-udpgro-sh/stdout
The other one is after commit d7db7775ea ("net: veth: do not manipulate
GRO when using XDP"), there is no need to load xdp program to enable GRO
on veth device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit d7db7775ea ("net: veth: do not manipulate GRO when using
XDP"), there is no need to load XDP program to enable GRO. On the other
hand, the current test is failed due to loading the XDP program. e.g.
# selftests: net: udpgro.sh
# ipv4
# no GRO ok
# no GRO chk cmsg ok
# GRO ./udpgso_bench_rx: recv: bad packet len, got 1472, expected 14720
#
# failed
[...]
# bad GRO lookup ok
# multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
#
# failed
ok 1 selftests: net: udpgro.sh
After fix, all the test passed.
# ./udpgro.sh
ipv4
no GRO ok
[...]
multiple GRO socks ok
Fixes: d7db7775ea ("net: veth: do not manipulate GRO when using XDP")
Reported-by: Yi Chen <yiche@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-53858
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we only check the latest senders's exit code. If the receiver
report failed, it is not recoreded. Fix it by checking the exit code
of all the involved processes.
Before:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
0
After:
bad GRO lookup ok
multiple GRO socks ./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
./udpgso_bench_rx: recv: bad packet len, got 1452, expected 14520
failed
$ echo $?
1
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fsl,enetc-ptp is embedded pcie device. Add compatible string pci1957,ee02.
Fix warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: ethernet@0,4:
compatible:0: 'pci1957,ee02' is not one of ['fsl,etsec-ptp', 'fsl,fman-ptp-timer', 'fsl,dpaa2-ptp', 'fsl,enetc-ptp']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
All callers of get_event_dest_clienter() pass 0 to the filter
argument, and it means that the check there is utterly redundant.
Drop the superfluous filter argument and its check as a code cleanup.
Link: https://patch.msgid.link/20240819084757.11902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UMP events don't use the event type field, hence it's invalid to apply
the filter, which may drop the events unexpectedly.
Skip the event filtering for UMP events, instead.
Fixes: 46397622a3 ("ALSA: seq: Add UMP support")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240819084156.10286-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Pavilion Plus 14-ey0xxx needs existing quirk
ALC245_FIXUP_HP_X360_MUTE_LEDS to enable its mute/micmute LEDs.
Signed-off-by: John Sweeney <john.sweeney@runbox.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/E1sfhrD-0007TA-HC@rmmprod05.runbox
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=nxTp
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-pwm-v6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO and PWM due for the v6.12 merge window
As commit 2e6506e1c4 ("mm/migrate: fix deadlock in
migrate_pages_batch() on large folios") has landed upstream, large
folios can be safely enabled for compressed inodes since all
prerequisites have already landed in 6.11-rc1.
Stress tests has been running on my fleet for over 20 days without any
regression. Additionally, users [1] have requested it for months.
Let's allow large folios for EROFS full cases upstream now for wider
testing.
[1] https://lore.kernel.org/r/CAGsJ_4wtE8OcpinuqVwG4jtdx6Qh5f+TON6wz+4HMCq=A2qFcA@mail.gmail.com
Cc: Barry Song <21cnbao@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
[ Gao Xiang: minor commit typo fixes. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240819025207.3808649-1-hsiangkao@linux.alibaba.com
Enable support for controlling the power-up sequence of the PMU inside
the WCN6855 model.
Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Bartosz: split Konrad's bigger patch, write the commit message]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240813190841.155067-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If the WCN module is powered up before linux boots and the ath11k driver
probes at the same time as the power sequencing driver, we may end up
driving the wlan-enable GPIO low in the latter, breaking the start-up of
the WLAN module. Request the wlan-enable GPIO as-is so that if the WLAN
module is already starting/started, we leave it alone.
Fixes: 2f1630f437 ("power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets")
Reported-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20240813190751.155035-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add functions to simply print some basic state information in selftests.
The output can be enabled by setting:
#define TH_LOG_ENABLED 1
#define DEBUG 1
* print_psw: current SIE state description and VM run state
* print_hex_bytes: print memory with some counting markers
* print_hex: PRINT_HEX with 512 bytes
* print_run: use print_psw and print_hex to print contents of VM run
state and SIE state description
* print_regs: print content of general and control registers
All prints use pr_debug for the output and can be configured using
DEBUG.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-6-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-6-schlameuss@linux.ibm.com>
Add a uc_kvm fixture to create and destroy a ucontrol VM.
* uc_sie_assertions asserts basic settings in the SIE as setup by the
kernel.
* uc_attr_mem_limit asserts the memory limit is max value and cannot be
set (not supported).
* uc_no_dirty_log asserts dirty log is not supported.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-5-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-5-schlameuss@linux.ibm.com>
Add test suite to validate the s390x architecture specific ucontrol KVM
interface.
Make use of the selftest test harness.
* uc_cap_hpage testcase verifies that a ucontrol VM cannot be run with
hugepages.
To allow testing of the ucontrol interface the kernel needs a
non-default config containing CONFIG_KVM_S390_UCONTROL.
This config needs to be set to built-in (y) as this cannot be built as
module.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-4-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-4-schlameuss@linux.ibm.com>
Subsequent tests do require direct manipulation of the SIE control
block. This commit introduces the SIE control block definition for use
within the selftests.
There are already definitions of this within the kernel.
This differs in two ways.
* This is the first definition of this in userspace.
* In the context of the selftests this does not require atomicity for
the flags.
With the userspace definition of the SIE block layout now being present
we can reuse the values in other tests where applicable.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-3-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-3-schlameuss@linux.ibm.com>
Multiple test cases need page size and shift definitions.
By moving the definitions to a single architecture specific header we
limit the repetition.
Make use of PAGE_SIZE, PAGE_SHIFT and PAGE_MASK defines in existing
code.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240807154512.316936-2-schlameuss@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240807154512.316936-2-schlameuss@linux.ibm.com>
The __insn32_query() function incorrectly uses the RRF instruction format
for both the SORTL (RRE format) and DFLTCC (RRF format) instructions.
To fix this issue, add separate query functions for SORTL and DFLTCC that
use the appropriate instruction formats.
Additionally pass the query operand as a pointer to the entire array
of 32 elements to slightly optimize performance and readability.
Fixes: d668139718 ("KVM: s390: provide query function for instructions returning 32 byte")
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Hariharan Mari <hari55@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Refactor the list of constant variables into a macro.
This should make it easier to add more constants in the future.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We used to generate different helpers for local and full
{cmp,}xchg(); these days the barriers are in arch_{cmp,}xchg()
instead and generated helpers are identical for local and
full cases. No need for those parametrized includes of
asm/xchg.h - we might as well insert its contents directly
in asm/cmpxchg.h and do it only once.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
BO from xe_bo_create_user() will always be of type,
ttm_bo_type_device. So remove that redundant parameter.
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240816102248.25628-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-8-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-7-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-6-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align with the datasheet by adding regulator-5v which
supplies each node from the regulator using phandle to
regulator-5v through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-5-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Align with the datasheet by adding regulator-5v which supplies
each node from the regulator using phandle to regulator-5v
through pvin[1-4]-supply and lvin-supply.
Co-developed-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://lore.kernel.org/r/20240812135231.43744-4-andrei.simion@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The old quirk combination sometimes cause a laggy keyboard after boot. With
the new quirk the initial issue of an unresponsive keyboard after s3 resume
is also fixed, but it doesn't have the negative side effect of the
sometimes laggy keyboard.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On s3 resume the i8042 driver tries to restore the controller to a known
state by reinitializing things, however this can confuse the controller
with different effects. Mostly occasionally unresponsive keyboards after
resume.
These issues do not rise on s0ix resume as here the controller is assumed
to preserved its state from before suspend.
This patch adds a quirk for devices where the reinitialization on s3 resume
is not needed and might be harmful as described above. It does this by
using the s0ix resume code path at selected locations.
This new quirk goes beyond what the preexisting reset=never quirk does,
which only skips some reinitialization steps.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240104183118.779778-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We are checking cp_irq_count from the wrong hdcp structure which
ends up giving timed out errors. We only increment the cp_irq_count
of the primary connector's hdcp structure but here in case of
multidisplay setup we end up checking the secondary connector's hdcp
structure, which will not have its cp_irq_count incremented. This leads
to a timed out at CP_IRQ error even though a CP_IRQ was raised. Extract
it from the correct intel_hdcp structure.
--v2
-Explain why it was the wrong hdcp structure [Jani]
Fixes: 8c9e4f68b8 ("drm/i915/hdcp: Use per-device debugs")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809114127.3940699-2-suraj.kandpal@intel.com
(cherry picked from commit dd92590263)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The csr_fun defines a count parameter which defines the total number
CSRs emulated in KVM starting from the base. This value should be
equal to total number of counters possible for trap/emulation (32).
Fixes: a9ac6c3752 ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-2-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, KVM traps & emulates PMU counter access only if SBI PMU
is available as the guest can only configure/read PMU counters via
SBI only. However, if SBI PMU is not enabled in the host, the
guest will fallback to the legacy PMU which will try to access
cycle/instret and result in an illegal instruction trap which
is not desired.
KVM can allow dummy emulation of cycle/instret only for the guest
if SBI PMU is not enabled in the host. The dummy emulation will
still return zero as we don't to expose the host counter values
from a guest using legacy PMU.
Fixes: a9ac6c3752 ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-1-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
With the latest Linux-6.11-rc3, the below NULL pointer crash is observed
when SBI PMU snapshot is enabled for the guest and the guest is forcefully
powered-off.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508
Oops [#1]
Modules linked in: kvm
CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3
Hardware name: riscv-virtio,qemu (DT)
epc : __kvm_write_guest_page+0x94/0xa6 [kvm]
ra : __kvm_write_guest_page+0x54/0xa6 [kvm]
epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0
gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000
t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0
s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086
a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0
a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc
s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000
s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000
s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001
s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3
t5 : ffffffff814126e0 t6 : ffffffff81412700
status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d
[<ffffffff01590e98>] __kvm_write_guest_page+0x94/0xa6 [kvm]
[<ffffffff015943a6>] kvm_vcpu_write_guest+0x56/0x90 [kvm]
[<ffffffff015a175c>] kvm_pmu_clear_snapshot_area+0x42/0x7e [kvm]
[<ffffffff015a1972>] kvm_riscv_vcpu_pmu_deinit.part.0+0xe0/0x14e [kvm]
[<ffffffff015a2ad0>] kvm_riscv_vcpu_pmu_deinit+0x1a/0x24 [kvm]
[<ffffffff0159b344>] kvm_arch_vcpu_destroy+0x28/0x4c [kvm]
[<ffffffff0158e420>] kvm_destroy_vcpus+0x5a/0xda [kvm]
[<ffffffff0159930c>] kvm_arch_destroy_vm+0x14/0x28 [kvm]
[<ffffffff01593260>] kvm_destroy_vm+0x168/0x2a0 [kvm]
[<ffffffff015933d4>] kvm_put_kvm+0x3c/0x58 [kvm]
[<ffffffff01593412>] kvm_vm_release+0x22/0x2e [kvm]
Clearly, the kvm_vcpu_write_guest() function is crashing because it is
being called from kvm_pmu_clear_snapshot_area() upon guest tear down.
To address the above issue, simplify the kvm_pmu_clear_snapshot_area() to
not zero-out PMU snapshot area from kvm_pmu_clear_snapshot_area() because
the guest is anyway being tore down.
The kvm_pmu_clear_snapshot_area() is also called when guest changes
PMU snapshot area of a VCPU but even in this case the previous PMU
snaphsot area must not be zeroed-out because the guest might have
reclaimed the pervious PMU snapshot area for some other purpose.
Fixes: c2f41ddbcd ("RISC-V: KVM: Implement SBI PMU Snapshot feature")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20240815170907.2792229-1-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
