- Use i_size instead of i_size_read() due to immutable fses;
- Get rid of an unneeded goto since erofs_fill_dentries() also works;
- Remove unnecessary lines.
Signed-off-by: Hongzhen Luo <hongzhen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240801112622.2164029-1-hongzhen@linux.alibaba.com
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
When forwarding SBI calls to userspace ensure sbiret.error is
initialized to SBI_ERR_NOT_SUPPORTED first, in case userspace
neglects to set it to anything. If userspace neglects it then we
can't be sure it did anything else either, so we just report it
didn't do or try anything. Just init sbiret.value to zero, which is
the preferred value to return when nothing special is specified.
KVM was already initializing both sbiret.error and sbiret.value, but
the values used appear to come from a copy+paste of the __sbi_ecall()
implementation, i.e. a0 and a1, which don't apply prior to the call
being executed, nor at all when forwarding to userspace.
Fixes: dea8ee31a0 ("RISC-V: KVM: Add SBI v0.1 support")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240807154943.150540-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Replace the deprecated one-element arrays with flexible-array members
in the structs filesystem_attribute_info and filesystem_device_info.
There are no binary differences after this conversion.
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are a couple of spelling mistakes in the documentation. This patch
fixes them.
Signed-off-by: Victor Timofei <victor@vtimothy.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If there is ->PreviousSessionId field in the session setup request,
The session of the previous connection should be destroyed.
During this, if the smb2 operation requests in the previous session are
being processed, a racy issue could happen with ksmbd_destroy_file_table().
This patch sets conn->status to KSMBD_SESS_NEED_RECONNECT to block
incoming operations and waits until on-going operations are complete
(i.e. idle) before desctorying the previous session.
Fixes: c8efcc7861 ("ksmbd: add support for durable handles v1/v2")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-25040
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
rsp buffer is allocated larger than spnego_blob from
smb2_allocate_rsp_buf().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Mandatory locking is enforced for cached reads, which violates
default posix semantics, and also it is enforced inconsistently.
This affected recent versions of libreoffice, and can be
demonstrated by opening a file twice from the same client,
locking it from handle one and trying to read from it from
handle two (which fails, returning EACCES).
There is already a mount option "forcemandatorylock"
(which defaults to off), so with this change only when the user
intentionally specifies "forcemandatorylock" on mount will we
break posix semantics on read to a locked range (ie we will
only fail in this case, if the user mounts with
"forcemandatorylock").
An earlier patch fixed the write path.
Fixes: 85160e03a7 ("CIFS: Implement caching mechanism for mandatory brlocks")
Cc: stable@vger.kernel.org
Cc: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reported-by: abartlet@samba.org
Reported-by: Kevin Ottens <kevin.ottens@enioka.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now that we should be `objtool`-warning free, enable `objtool` for
Rust too.
Before this patch series, we were already getting warnings under e.g. IBT
builds, since those would see Rust code via `vmlinux.o`.
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-7-ojeda@kernel.org
[ Solved trivial conflict. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust functions may be `noreturn` (i.e. diverging) by returning the
"never" type, `!`, e.g.
fn f() -> ! {
loop {}
}
Thus list the known `noreturn` functions to avoid such warnings.
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...9panic_fmt() falls through to next function _R...18panic_nounwind_fmt()
rust/alloc.o: warning: objtool:
.text: unexpected end of section
In order to do so, we cannot match symbols' names exactly, for two
reasons:
- Rust mangling scheme [1] contains disambiguators [2] which we
cannot predict (e.g. they may vary depending on the compiler version).
One possibility to solve this would be to parse v0 and ignore/zero
those before comparison.
- Some of the diverging functions come from `core`, i.e. the Rust
standard library, which may change with each compiler version
since they are implementation details (e.g. `panic_internals`).
Thus, to workaround both issues, only part of the symbols are matched,
instead of using the `NORETURN` macro in `noreturns.h`.
Ideally, just like for the C side, we should have a better solution. For
instance, the compiler could give us the list via something like:
$ rustc --emit=noreturns ...
[ Kees agrees this should be automated and Peter says:
So it would be fairly simple to make objtool consume a magic section
emitted by the compiler.. I think we've asked the compiler folks
for that at some point even, but I don't have clear recollections.
We will ask upstream Rust about it. And if they agree, then perhaps
we can get Clang/GCC to implement something similar too -- for this
sort of thing we can take advantage of the shorter cycles of `rustc`
as well as their unstable features concept to experiment.
Gary proposed using DWARF (though it would need to be available), and
wrote a proof of concept script using the `object` and `gimli` crates:
https://gist.github.com/nbdd0121/449692570622c2f46a29ad9f47c3379a
- Miguel ]
Link: https://rust-lang.github.io/rfcs/2603-rust-symbol-name-mangling-v0.html [1]
Link: https://doc.rust-lang.org/rustc/symbol-mangling/v0.html#disambiguator [2]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240725183325.122827-6-ojeda@kernel.org
[ Added `len_mismatch_fail` symbol for new `kernel` crate code merged
since then as well as 3 more `core::panicking` symbols that appear
in `RUST_DEBUG_ASSERTIONS=y` builds. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support `MITIGATION_SLS` by enabling the target features that Clang does.
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...next_up+0x44: missing int3 after ret
These should be eventually enabled via `-Ctarget-feature` when `rustc`
starts recognizing them (or via a new dedicated flag) [1].
Link: https://github.com/rust-lang/rust/issues/116851 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240725183325.122827-5-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The Rust compiler added support for `-Zfunction-return=thunk-extern` [1]
in 1.76.0 [2], i.e. the equivalent of `-mfunction-return=thunk-extern`.
Thus add support for `MITIGATION_RETHUNK`.
Without this, `objtool` would warn if enabled for Rust and already warns
under IBT builds, e.g.:
samples/rust/rust_print.o: warning: objtool:
_R...init+0xa5c: 'naked' return found in RETHUNK build
Link: https://github.com/rust-lang/rust/issues/116853 [1]
Link: https://github.com/rust-lang/rust/pull/116892 [2]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://github.com/Rust-for-Linux/linux/issues/945
Link: https://lore.kernel.org/r/20240725183325.122827-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Support `MITIGATION_RETPOLINE` by enabling the target features that
Clang does.
The existing target feature being enabled was a leftover from
our old `rust` branch, and it is not enough: the target feature
`retpoline-external-thunk` only implies `retpoline-indirect-calls`, but
not `retpoline-indirect-branches` (see LLVM's `X86.td`), unlike Clang's
flag of the same name `-mretpoline-external-thunk` which does imply both
(see Clang's `lib/Driver/ToolChains/Arch/X86.cpp`).
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...escape_default+0x13: indirect jump found in RETPOLINE build
In addition, change the comment to note that LLVM is the one disabling
jump tables when retpoline is enabled, thus we do not need to use
`-Zno-jump-tables` for Rust here -- see commit c58f2166ab39 ("Introduce
the "retpoline" x86 mitigation technique ...") [1]:
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In
many cases, the compiler can simply use directed conditional
branches and a small search tree. LLVM already has support for
lowering switches in this way and the first step of this patch is
to disable jump-table lowering of switches and introduce a pass to
rewrite explicit indirectbr sequences into a switch over integers.
As well as a live example at [2].
These should be eventually enabled via `-Ctarget-feature` when `rustc`
starts recognizing them (or via a new dedicated flag) [3].
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: c58f2166ab [1]
Link: https://godbolt.org/z/G4YPr58qG [2]
Link: https://github.com/rust-lang/rust/issues/116852 [3]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/945
Link: https://lore.kernel.org/r/20240725183325.122827-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the equivalent of the `___ADDRESSABLE()` annotation in the
`module_{init,exit}` macros to the Rust `module!` macro.
Without this, `objtool` would complain if enabled for Rust (under IBT
builds), e.g.:
samples/rust/rust_print.o: warning: objtool: cleanup_module(): not an indirect call target
samples/rust/rust_print.o: warning: objtool: init_module(): not an indirect call target
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20240725183325.122827-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This patch splits up the rust helpers C file. When rebasing patch sets on
upstream linux, merge conflicts in helpers.c is common and time consuming
[1]. Thus, split the file so that each kernel component can live in a
separate file.
This patch lists helper files explicitly and thus conflicts in the file
list is still likely. However, they should be more simple to resolve than
the conflicts usually seen in helpers.c.
[ Removed `README.md` and undeleted the original comment since now,
in v3 of the series, we have a `helpers.c` again; which also allows
us to keep the "Sorted alphabetically" line and makes the diff easier.
In addition, updated the Documentation/ mentions of the file, reworded
title and removed blank lines at the end of `page.c`. - Miguel ]
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/288089-General/topic/Splitting.20up.20helpers.2Ec/near/426694012 [1]
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240815103016.2771842-1-nmi@metaspace.dk
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When enabling Rust in the kernel, we only need to block on the
RANDSTRUCT feature and GCC plugin. The rest of the GCC plugins
are reasonably safe to enable.
[ Originally (years ago) we only had this restriction, but we ended up
restricting also the rest of the GCC plugins 1) to be on the safe side,
2) since compiler plugin support could be going away in the kernel and
3) since mixed builds are best effort so far; so I asked Neal about
his experience enabling the other plugins -- Neal says:
When I originally wrote this patch two years ago to get things
working, Fedora used all the GCC plugins, so I was trying to get GCC +
Rust to work while minimizing the delta on build differences. This was
the combination that worked. We've been carrying this patch in the
Asahi tree for a year now. And while Fedora does not currently have
GCC plugins enabled because it caused issues with some third-party
modules (I think it was the NVIDIA driver, but I'm not sure), it was
around long enough for me to know with some confidence that it was
fine this way.
- Miguel ]
Signed-off-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20240731125615.3368813-1-neal@gompa.dev
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
For the new Rust support for 32-bit arm [1], Clippy warns:
error: useless conversion to the same type: `i32`
--> rust/kernel/error.rs:139:36
|
139 | unsafe { bindings::ERR_PTR(self.0.into()) as *mut _ }
| ^^^^^^^^^^^^^ help: consider removing `.into()`: `self.0`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
= note: `-D clippy::useless-conversion` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::useless_conversion)]`
The `self.0.into()` converts an `c_int` into `ERR_PTR`'s parameter
which is a `c_long`. Thus, both types are `i32` in 32-bit. Therefore,
allow it for those architectures.
Link: https://lore.kernel.org/rust-for-linux/2dbd1491-149d-443c-9802-75786a6a3b73@gmail.com/ [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Link: https://lore.kernel.org/r/20240730155702.1110144-1-ojeda@kernel.org
[ Fixed typo in tag. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There are no guarantees for the pointer returned by `into_foreign`.
This is simply because there is no safety documentation stating any
guarantees. Therefore dereferencing and all other operations for that
pointer are not allowed in a general context (i.e. when the concrete
type implementing the trait is not known).
This might be confusing, therefore add normal documentation to state
that there are no guarantees given for the pointer.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240730182251.1466684-1-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We already implement ForeignOwnable for Box<T>, but it may be useful to
store pinned data in a ForeignOwnable container. This patch makes that
possible.
This will be used together with upcoming miscdev abstractions, which
Binder will use when binderfs is disabled.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240730-foreign-ownable-pin-box-v1-1-b1d70cdae541@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
For pinned and unpinned initialization of structs, a trait named
`InPlaceInit` exists for uniform access. `Arc` did not implement
`InPlaceInit` yet, although the functions already existed. The main
reason for that, was that the trait itself returned a `Pin<Self>`. The
`Arc` implementation of the kernel is already implicitly pinned.
To enable `Arc` to implement `InPlaceInit` and to have uniform access,
for in-place and pinned in-place initialization, an associated type is
introduced for `InPlaceInit`. The new implementation of `InPlaceInit`
for `Arc` sets `Arc` as the associated type. Older implementations use
an explicit `Pin<T>` as the associated type. The implemented methods for
`Arc` are mostly moved from a direct implementation on `Arc`. There
should be no user impact. The implementation for `ListArc` is omitted,
because it is not merged yet.
Link: https://github.com/Rust-for-Linux/linux/issues/1079
Signed-off-by: Alex Mantel <alexmantel93@mailbox.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240727042442.682109-1-alexmantel93@mailbox.org
[ Removed "Rusts" (Benno). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Override default maximum RX timeout with the value picked from the
devicetree, when provided.
Suggested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-4-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
System Controller Management Interface(SCMI) firmwares might have different
designs depending on the platform: the maximum receive channel timeout
value might vary depending on the specific underlying hardware and firmware
design choices.
Introduce the general property max-rx-timeout-ms property to describe the
transport needs of a specific platform design.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[Cristian: reworded commit message, s/mailbox/transport in description]
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-3-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The descriptor structure scmi_desc contains a variety of fields related to
the transport functionalities and it is defined by the transport drivers
themselves; such elements, though, serve varied purposes and have different
lifetime.
In particular, while there are some of those elements that provide a
description of transport features that are supposed to be immutable, on
the other side there are present also some other characteristics that are
instead supposed to be configurable on a per-platform base since they
represent configuration features tied to the specific hardware/firmware
system.
The immutable fields are already qualified as const on the their own; get
rid of the structure-level const qualifier which is not needed, so as to
enable possible runtime customization of the mutable configuration
features.
No functional change.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Message-Id: <20240730144707.1647025-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20240816151407.155034-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Here are 2 driver fixes for regressions from 6.11-rc1 due to the driver
core change making a structure in a driver core callback const. These
were missed by all testing EXCEPT for what Bart happened to be running,
so I appreciate the fixes provided here for some odd/not-often-used
driver subsystems that nothing else happened to catch.
Both of these fixes have been in linux-next all week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIWNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylHBgCdGDGhaQp4W/dLejZBeMtuGLILTcoAnRm7/Aj8
U/uR4ukttCXjfvjlalxi
=t+bl
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are "obviously correct" so will be safe :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIT4A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymYQACfeV6tIMHlHSVS9VSbiXHJAovjvFEAoLQvuvBS
0dN1Q4iYF+5Sy4JWAZb/
=ztLK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
Here are some small tty and serial driver fixes for 6.11-rc4 to resolve
some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIUhw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymHUACdHhcerkgnsJxwy4pUTbH1mjCsQ40AniqUkc/l
5bShqqmhDP1Y5zh7D5w5
=rdx/
-----END PGP SIGNATURE-----
Merge tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
'inline' keyword is only a recommendation for compiler. If it decides to
not inline nodemask functions, the whole small_const_nbits() machinery
doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/20221027043810.350460-2-yury.norov@gmail.com/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
On recent (v6.6+) builds with Clang (based on Clang 18.0.0) and certain
configurations [0], I'm finding that (lack of) inlining decisions may
lead to section mismatch warnings like the following:
WARNING: modpost: vmlinux.o: section mismatch in reference:
cpumask_andnot (section: .text) ->
cpuhp_bringup_cpus_parallel.tmp_mask (section: .init.data) ERROR:
modpost: Section mismatches detected.
or more confusingly:
WARNING: modpost: vmlinux: section mismatch in reference:
cpumask_andnot+0x5f (section: .text) -> efi_systab_phys (section:
.init.data)
The first warning makes a little sense, because
cpuhp_bringup_cpus_parallel() (an __init function) calls
cpumask_andnot() on tmp_mask (an __initdata symbol). If the compiler
doesn't inline cpumask_andnot(), this may appear like a mismatch.
The second warning makes less sense, but might be because efi_systab_phys
and cpuhp_bringup_cpus_parallel.tmp_mask are laid out near each other,
and the latter isn't a proper C symbol definition.
In any case, it seems a reasonable solution to suggest more strongly to
the compiler that these cpumask macros *must* be inlined, as 'inline' is
just a recommendation.
This change has been previously proposed in the past as:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/20221027043810.350460-2-yury.norov@gmail.com/
But the change has been split up, to separately justify the cpumask
changes (which drive my work) and the bitmap/const optimizations (that
Yury separately proposed for other reasons). This ends up as somewhere
between a "rebase" and "rewrite" -- I had to rewrite most of the patch.
According to bloat-o-meter, vmlinux decreases minimally in size (-0.00%
to -0.01%, depending on the version of GCC or Clang and .config in
question) with this series of changes:
gcc 13.2.0, x86_64_defconfig
-3005 bytes, Before=21944501, After=21941496, chg -0.01%
clang 16.0.6, x86_64_defconfig
-105 bytes, Before=22571692, After=22571587, chg -0.00%
gcc 9.5.0, x86_64_defconfig
-1771 bytes, Before=21557598, After=21555827, chg -0.01%
clang 18.0_pre516547 (ChromiumOS toolchain), x86_64_defconfig
-191 bytes, Before=22615339, After=22615148, chg -0.00%
clang 18.0_pre516547 (ChromiumOS toolchain), based on ChromiumOS config + gcov
-979 bytes, Before=76294783, After=76293804, chg -0.00%
[0] CONFIG_HOTPLUG_PARALLEL=y ('select'ed for x86 as of [1]) and
CONFIG_GCOV_PROFILE_ALL.
[1] commit 0c7ffa32db ("x86/smpboot/64: Implement
arch_cpuhp_init_parallel_bringup() and enable it")
Co-developed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
'inline' keyword is only a recommendation for compiler. If it decides to
not inline bitmap functions, the whole small_const_nbits() machinery
doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/20221027043810.350460-2-yury.norov@gmail.com/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
'inline' keyword is only a recommendation for compiler. If it decides to
not inline find_bit nodemask functions, the whole small_const_nbits()
machinery doesn't work.
This is how a standard GCC 11.3.0 does for my x86_64 build now. This patch
replaces 'inline' directive with unconditional '__always_inline' to make
sure that there's always a chance for compile-time optimization. It doesn't
change size of kernel image, according to bloat-o-meter.
[[ Brian: split out from:
Subject: [PATCH 1/3] bitmap: switch from inline to __always_inline
https://lore.kernel.org/all/20221027043810.350460-2-yury.norov@gmail.com/
But rewritten, as there were too many conflicts. ]]
Co-developed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZsIVPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXZQCgtIX9QomJztpybexiFP70JJrGksMAn3SHFdHG
Fp1XVUssS8asP7H0M2iE
=m7n6
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
-----BEGIN PGP SIGNATURE-----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=YBfJ
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.
- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds
- update target inode's ctime on unlink, mandated by POSIX
- properly take lock to read/update block group's zoned variables
- add counted_by() annotations"
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: stable@kernel.org
Fixes: a1d75f2582 ("fuse: add store request")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a test for the new functionality of userspace-driven timers and the
tool which allows us to count timer ticks in a certain time period. The
test:
1. Creates a userspace-driven timer with ioctl to /dev/snd/timer
2. Starts the `global-timer` application to count the ticks of the timer
from step 1.
3. Asynchronously triggers the timer multiple times with some interval
4. Compares the amount of caught ticks with the amount of trigger calls.
Since we can't include <alsa/asoundlib.h> and <sound/asound.h> in one
file due to overlapping declarations, I have to split the test into two
applications: one of them counts the amount of timer ticks in the
defined time period, and another one is the actual test which creates
the timer, triggers it periodically and starts the first app to count
the amount of ticks in a separate thread.
Besides from testing the functionality itself, the test represents a
sample application showing userspace-driven ALSA timers API.
Also, the timer test includes a test case which tries to create a timer
with invalid resolution (=0), and NULL as a timer info structure.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-5-ivan.orlov0322@gmail.com
Implement two ioctl calls in order to support virtual userspace-driven
ALSA timers.
The first ioctl is SNDRV_TIMER_IOCTL_CREATE, which gets the
snd_timer_uinfo struct as a parameter and puts a file descriptor of a
virtual timer into the `fd` field of the snd_timer_unfo structure. It
also updates the `id` field of the snd_timer_uinfo struct, which
provides a unique identifier for the timer (basically, the subdevice
number which can be used when creating timer instances).
This patch also introduces a tiny id allocator for the userspace-driven
timers, which guarantees that we don't have more than 128 of them in the
system.
Another ioctl is SNDRV_TIMER_IOCTL_TRIGGER, which allows us to trigger
the virtual timer (and calls snd_timer_interrupt for the timer under
the hood), causing all of the timer instances binded to this timer to
execute their callbacks.
The maximum amount of ticks available for the timer is 1 for the sake of
simplicity of the userspace API. 'start', 'stop', 'open' and 'close'
callbacks for the userspace-driven timers are empty since we don't
really do any hardware initialization here.
Suggested-by: Axel Holzinger <aholzinger@gmx.de>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-4-ivan.orlov0322@gmail.com
Add the documentation which describes the new userspace-driven timers
API introduced in this patch series. The documentation contains:
- Description of userspace-driven ALSA timers, what they are for
- Description of the timers API
- Example of how the timers can be created and triggered
- How the timers can be used as a timer sources for snd-aloop module
Suggested-by: Axel Holzinger <aholzinger@gmx.de>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240813120701.171743-3-ivan.orlov0322@gmail.com
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from spi_device_id table.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815091312.757139-1-liuyuntao12@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing code enables the Cadence IP interrupts after the bus
reset sequence. The problem with this sequence is that it might be
pre-empted, giving SoundWire devices time to sync and report as
ATTACHED before the interrupts are enabled. In that case, the Cadence
IP will not detect a state change and will not throw an interrupt to
proceed with the enumeration of a Device0.
In our overnight stress tests, we observed that a slight
sub-millisecond delay in enabling interrupts after the reset was
correlated with detection failures. This problem is more prevalent on
the LunarLake silicon, likely due to SOC integration changes, but it
was observed on earlier generations as well.
This patch reverts the sequence, with the interrupts enabled before
performing the bus reset. This removes the race condition and makes
sure the Cadence IP is able to detect the presence of a Device0 in all
cases.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240805115003.88035-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoundWire peripheral enumeration is entirely based on interrupts,
more specifically sticky bits tracking state changes.
This patch adds a defensive programming check on the actual status
reported in PING frames. If for some reason an interrupt was lost or
delayed, the delayed work would detect a peripheral change of status
after the bus starts.
The 100ms defined for the delay is not completely arbitrary, if a
Peripheral didn't join the bus within that delay then probably the
hardware link is broken, and conversely if the detection didn't happen
because of software issues the 100ms is still acceptable in terms of
user experience.
The overhead of the one-shot workqueue is minimal, and the mutual
exclusion ensures that the interrupt and delayed work cannot update
the status concurrently.
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the place,
no identifiable-by-me theme. Please see the lovingly curated changelogs
to get the skinny.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZsFf8wAKCRDdBJ7gKXxA
jvEUAP97y/sqKD8rQNc0R8fRGSPNPamwyok8RHwohb0JEHovlAD9HsQ9Ad57EpqR
wBexMxJRFc7Dt73Tu6IkLQ1iNGqABAc=
=8KNp
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to: Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal Jan
K.A, Shrikanth Hegde, Thomas Gleixner, Tyrel Datwyler.
-----BEGIN PGP SIGNATURE-----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=sZ+f
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.
* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'
Those counters were used to keep track of the numbers VMs in fault mode
and in non-fault mode, to determine if the whole device was in fault mode
or not. This is no longer needed so remove those variables and their
usages.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-12-francois.dugast@intel.com
With this restriction, all VMs on the device must be faulting VMs if there
is already one faulting VM, in which case the device is considered in
fault mode. This prevents for example an application from running 3D jobs
for the compositor while submitting a SVM compute job on the same device.
Now that mutual exclusion of faulting LR jobs and dma fence jobs is
ensured on the hw engine group, remove this restriction to allow running
faulting and non-faulting VMs on the same device.
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-11-francois.dugast@intel.com
If the job about to be submitted is a dma-fence job, update the current
execution mode of the hw engine group. This triggers an immediate suspend
of the exec queues running faulting long-running jobs.
If the job about to be submitted is a long-running job, kick a new worker
used to resume the exec queues running faulting long-running jobs once
the dma-fence jobs have completed.
v2: Kick the resume worker from exec IOCTL, switch to unordered workqueue,
destroy it after use (Matt Brost)
v3: Do not resume if no exec queue was suspended (Matt Brost)
v4: Squash commits (Matt Brost)
v5: Do not kick the worker when xe_vm_in_preempt_fence_mode (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-10-francois.dugast@intel.com
Provide a way to safely transition execution modes of the hw engine group
ahead of the actual execution. When necessary, either wait for running
jobs to complete or preempt them, thus ensuring mutual exclusion between
execution modes.
Unlike a mutex, the rw_semaphore used in this context allows multiple
submissions in the same mode.
v2: Use lockdep_assert_held_write, add annotations (Matt Brost)
v3: Fix kernel doc, remove redundant code (Matt Brost)
v4: Now that xe_hw_engine_group_suspend_faulting_lr_jobs can fail,
propagate the error to the caller (Matt Brost)
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809155156.1955925-9-francois.dugast@intel.com
