Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.11.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect
data is printed to error log. 'req->sso' value is printed instead of
'req->ssow'. Looks like "copy-paste" mistake.
Fix this mistake by replacing 'req->sso' with 'req->ssow'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 746ea74241 ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240705095317.12640-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the cases where the power domain connected to logics is allowed to
transition from a level(L)-->power collapse(0)-->retention(1) or
vice versa retention(1)-->power collapse(0)-->level(L) will cause the
logic to lose the configurations. The ARC does not support retention
to collapse transition on MxC rails.
The targets from SM8450 onwards the PLL logics of clock controllers are
connected to MxC rails and the recommended configurations are carried
out during the clock controller probes. The MxC transition as mentioned
above should be skipped to ensure the PLL settings are intact across
clock controller power on & off.
On older targets that do not split MX into MxA and MxC does not collapse
the logic and it is parked always at RETENTION, thus this issue is never
observed on those targets.
Cc: stable@vger.kernel.org # v5.17
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20240625-avoid_mxc_retention-v2-1-af9c2f549a5f@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use the LRU walker for eviction. This helps
removing a lot of code with weird locking
semantics.
The functionality is slightly changed so that
when trylocked buffer objects are exhausted, we
continue to interleave walks with ticket-locks while
there is still progress made. The list walks are
not restarted in-between evictions.
Also provide a separate ttm_bo_evict_first()
function for its single user. The context of that
user allows sleeping dma_resv locks.
v6:
- Various cleanups suggested by Matthew Brost.
- Fix error return code of ttm_bo_evict_first(). (Matthew Brost)
- Fix an error check that was inverted. (Matthew Brost)
v7:
- Use s64 rather than long (Christian König)
- Early ttm_resource_cursor_fini() in ttm_bo_evict_first().
- Simplify check for bo_moved in ttm_bo_evict_first().
(Christian König)
- Don't evict pinned bos.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-8-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Rework the TTM swapping to use the LRU walker helper.
This helps fixing up the ttm_bo_swapout() interface
to be consistent about not requiring any locking.
For now mimic the current behaviour of using trylock
only. We could be using ticket-locks here but defer
that until it's deemed necessary. The TTM swapout
functionality is a bit weird anyway since it
alternates between memory types without exhausting
TTM_PL_SYSTEM first.
Intentionally keep pages as the unit of progress since
changing that to bytes is an unrelated change that can
be done later.
v6:
- Improve on error code translation in the swapout callback
(Matthew Brost).
v7:
- Use s64 rather than long.
- Remove ttm_resource_cursor_fini() since it's no longer used.
- Rename ttm_resource_cursor_fini_locked() to
ttm_resource_cursor_fini().
- Don't swap out pinned bos.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-7-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Provide a generic LRU walker in TTM, in the spirit of drm_gem_lru_scan()
but building on the restartable TTM LRU functionality.
The LRU walker optionally supports locking objects as part of
a ww mutex locking transaction, to mimic to some extent the
current functionality in ttm. However any -EDEADLK return
is converted to -ENOSPC and then to -ENOMEM before reaching
the driver, so that the driver will need to backoff and possibly retry
without being able to keep the ticket.
v3:
- Move the helper to core ttm.
- Remove the drm_exec usage from it for now, it will be
reintroduced later in the series.
v4:
- Handle the -EALREADY case if ticketlocking.
v6:
- Some cleanup and added code comments (Matthew Brost)
- Clarified the ticketlock in the commit message (Matthew Brost)
v7:
- Use s64 rather than long for the target and progress
(Christian König)
- Update documentation to not encourage using pages as a
progress measure. (Christian König)
- Remove cond_resched(). (Christian König)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-6-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
To address the problem with hitches moving when bulk move
sublists are lru-bumped, register the list cursors with the
ttm_lru_bulk_move structure when traversing its list, and
when lru-bumping the list, move the cursor hitch to the tail.
This also means it's mandatory for drivers to call
ttm_lru_bulk_move_init() and ttm_lru_bulk_move_fini() when
initializing and finalizing the bulk move structure, so add
those calls to the amdgpu- and xe driver.
Compared to v1 this is slightly more code but less fragile
and hopefully easier to understand.
Changes in previous series:
- Completely rework the functionality
- Avoid a NULL pointer dereference assigning manager->mem_type
- Remove some leftover code causing build problems
v2:
- For hitch bulk tail moves, store the mem_type in the cursor
instead of with the manager.
v3:
- Remove leftover mem_type member from change in v2.
v6:
- Add some lockdep asserts (Matthew Brost)
- Avoid NULL pointer dereference (Matthew Brost)
- No need to check bo->resource before dereferencing
bo->bulk_move (Matthew Brost)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Have iterators insert themselves into the list they are iterating
over using hitch list nodes. Since only the iterator owner
can remove these list nodes from the list, it's safe to unlock
the list and when continuing, use them as a starting point. Due to
the way LRU bumping works in TTM, newly added items will not be
missed, and bumped items will be iterated over a second time before
reaching the end of the list.
The exception is list with bulk move sublists. When bumping a
sublist, a hitch that is part of that sublist will also be moved
and we might miss items if restarting from it. This will be
addressed in a later patch.
Changes in previous series:
- Updated ttm_resource_cursor_fini() documentation.
v2:
- Don't reorder ttm_resource_manager_first() and _next().
(Christian König).
- Use list_add instead of list_move
(Christian König)
v3:
- Split into two patches, one cleanup, one new functionality
(Christian König)
- use ttm_resource_cursor_fini_locked() instead of open-coding
(Matthew Brost)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
To make the transition to using lru hitches easier,
simplify the ttm_resource_manager_next() interface to only take
the cursor and reuse ttm_resource_manager_next() functionality
from ttm_resource_manager_first().
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-3-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
To be able to handle list unlocking while traversing the LRU
list, we want the iterators not only to point to the next
position of the list traversal, but to insert themselves as
list nodes at that point to work around the fact that the
next node might otherwise disappear from the list while
the iterator is pointing to it.
These list nodes need to be easily distinguishable from other
list nodes so that others traversing the list can skip
over them.
So declare a struct ttm_lru_item, with a struct list_head member
and a type enum. This will slightly increase the size of a
struct ttm_resource.
Changes in previous series:
- Update enum ttm_lru_item_type documentation.
v3:
- Introduce ttm_lru_first_res_or_null()
(Christian König, Thomas Hellström)
v5:
- Update also the TTM test code (Xe CI).
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Some cleanups of rtl8xxxu and rtlwifi, and some fixes of rtw88. The major
change is to develop WoWLAN and preparation of RTL8852BE-VT listed below:
rtw89:
- preparation of RTL8852BE-VT
* add RF calibration code
* move shared code with RTL8852BE to common module
- add WoWLAN for WiFi 6 chips
- support 36-bit PCI DMA
-----BEGIN PGP SIGNATURE-----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=zIud
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-07-05' of https://github.com/pkshih/rtw
rtw-next patches for v6.11
Some cleanups of rtl8xxxu and rtlwifi, and some fixes of rtw88. The major
change is to develop WoWLAN and preparation of RTL8852BE-VT listed below:
rtw89:
- preparation of RTL8852BE-VT
* add RF calibration code
* move shared code with RTL8852BE to common module
- add WoWLAN for WiFi 6 chips
- support 36-bit PCI DMA
The Documentation/userspace-api/iommu.rst file has become outdated due
to the removal of associated structures and APIs.
Specifically, struct such as iommu_cache_invalidate_info and guest
pasid related uapi were removed in commit 0c9f178778 ("iommu:
Remove guest pasid related interfaces and definitions").
And the corresponding uapi/linux/iommu.h file was removed in
commit 00a9bc6070 ("iommu: Move iommu fault data to
linux/iommu.h").
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240702120617.26882-1-mark-pk.tsai@mediatek.com
[will: Remove stale reference to 'iommu' from index.rst]
Signed-off-by: Will Deacon <will@kernel.org>
HP 250 G7 has a mute LED that can be made to work using quirk
ALC269_FIXUP_HP_LINE1_MIC1_LED. Enable already existing quirk.
Signed-off-by: Nazar Bilinskyi <nbilinskyi@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240709080546.18344-1-nbilinskyi@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All the MFD components are gone from the header meanwhile. Only the MMC
relevant data is left which makes it a platform_data for the MMC
controller. Move the header to the now fitting directory.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-14-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
Reformat the comments to utilize the maximum line length and use single
line comments where appropriate. Remove superfluous comments, too.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-13-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
Remove meanwhile unneeded includes, only add types.h for dma_addr_t.
Also, remove an obsolete forward declaration while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-12-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 568494db68 ("mtd: remove tmio_nand driver") and commit
aceae78486 ("fbdev: remove tmiofb driver"), these accessors have no
users anymore. Remove them.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-10-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
With commit 8971bb812e ("mfd: remove toshiba tmio drivers"), all users
of platform data for NAND and framebuffers are gone. So, remove
definitions from the header, too.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240213220221.2380-9-wsa+renesas@sang-engineering.com
Signed-off-by: Lee Jones <lee@kernel.org>
bnxt doesn't check if a ring is used by RSS contexts when reducing
ring count. Core performs a similar check for the drivers for
the main context, but core doesn't know about additional contexts,
so it can't validate them. bnxt_fill_hw_rss_tbl_p5() uses ring
id to index bp->rx_ring[], which without the check may end up
being out of bounds.
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
Core does track the additional contexts in net-next, so we can
move this validation out of the driver as a follow up there.
Fixes: b3d0083caf ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240705020005.681746-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix typos s/steam/stream/ and spell out Schedule/Unschedule in the
comments.
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240704202558.62704-2-thorsten.blum@toblux.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The prerequisite for MLO support in cfg80211/mac80211 is that all the links
participating in MLO must be from the same wiphy/ieee80211_hw. To meet this
expectation, some drivers may need to group multiple discrete hardware each
acting as a link in MLO under single wiphy.
With this change, supported frequencies and interface combinations of each
individual radio are reported to user space. This allows user space to figure
out the limitations of what combination of channels can be used concurrently.
Even for non-MLO devices, this improves support for devices capable of
running on multiple channels at the same time.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/18a88f9ce82b1c9f7c12f1672430eaf2bb0be295.1720514221.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chanctx emulation didn't info IEEE80211_CONF_CHANGE_CHANNEL to drivers
during ieee80211_restart_hw (ieee80211_emulate_add_chanctx). It caused
non-chanctx drivers to not stand on the correct channel after recovery.
RX then behaved abnormally. Finally, disconnection/reconnection occurred.
So, set IEEE80211_CONF_CHANGE_CHANNEL when in_reconfig.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Link: https://patch.msgid.link/20240709073531.30565-1-kevin_yang@realtek.com
Cc: stable@vger.kernel.org
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Not all registers in PMU_ALIVE block support atomic set/clear operations.
GS101_SYSIP_DAT0 and GS101_SYSTEM_CONFIGURATION registers are two regs
where attempting atomic access fails.
As documentation on exactly which registers support atomic operations is
not forthcoming. We default to atomic access, unless the register is
explicitly added to the tensor_is_atomic() function. Update the comment
to reflect this as well.
Reviewed-by: Will McVicker <willmcvicker@google.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240628223506.1237523-4-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240702063514.6215-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Make the Freescale IFC driver selectable because it is used now by two
drivers: Freescale NAND and generic NOR flash. The patches adjusting
defconfig are waiting on the mailing lists to be picked up.
-----BEGIN PGP SIGNATURE-----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=9GRd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4CV6
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.11
Make the Freescale IFC driver selectable because it is used now by two
drivers: Freescale NAND and generic NOR flash. The patches adjusting
defconfig are waiting on the mailing lists to be picked up.
* tag 'memory-controller-drv-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: fsl: replace maintainer
memory: fsl_ifc: Make FSL_IFC config visible and selectable
Link: https://lore.kernel.org/r/20240702070212.8291-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This tag adds USB VBUS regulator control for Renesas RZ/G2L SoCs,
which also touches PHY driver and device tree, and pulls in a new
regulator_hardware_enable() helper.
The Tegra BPMP reset driver can be compiled under COMPILE_TEST now.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCZoUaTRcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwLORAQCMpFmwFHo92VYuDHb0td2cEwLV
ncK1WrlYWHfdAoqI1gEA/qZrIcutWXd+5DCu6W6cJKls00P+8h5vTnzGmIpXsg4=
=JbtH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=RppS
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v6.11-2' of git://git.pengutronix.de/pza/linux into soc/drivers
Reset controller updates for v6.11, part 2
This tag adds USB VBUS regulator control for Renesas RZ/G2L SoCs,
which also touches PHY driver and device tree, and pulls in a new
regulator_hardware_enable() helper.
The Tegra BPMP reset driver can be compiled under COMPILE_TEST now.
* tag 'reset-for-v6.11-2' of git://git.pengutronix.de/pza/linux:
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
phy: renesas: phy-rcar-gen3-usb2: Control VBUS for RZ/G2L SoCs
reset: renesas: Add USB VBUS regulator device as child
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document USB VBUS regulator
reset: tegra-bpmp: allow building under COMPILE_TEST
regulator: core: Add helper for allow HW access to enable/disable regulator
Link: https://lore.kernel.org/r/20240703100809.2773890-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
-----BEGIN PGP SIGNATURE-----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=Eknv
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lPdX
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.11
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
* tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
soc: qcom: smp2p: Use devname for interrupt descriptions
soc: qcom: smsm: Add missing mailbox dependency to Kconfig
soc: qcom: add missing pd-mapper dependencies
soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
soc: qcom: add pd-mapper implementation
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: protect locator_addr with the main mutex
firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
firmware: qcom: scm: add support for SHM bridge memory carveout
firmware: qcom: tzmem: enable SHM Bridge support
firmware: qcom: scm: add support for SHM bridge operations
firmware: qcom: qseecom: convert to using the TZ allocator
firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
...
Link: https://lore.kernel.org/r/20240705034410.13968-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
syzbot reported a UAF caused by a race when the L2TP work queue closes a
tunnel at the same time as a userspace thread closes a session in that
tunnel.
Tunnel cleanup is handled by a work queue which iterates through the
sessions contained within a tunnel, and closes them in turn.
Meanwhile, a userspace thread may arbitrarily close a session via
either netlink command or by closing the pppox socket in the case of
l2tp_ppp.
The race condition may occur when l2tp_tunnel_closeall walks the list
of sessions in the tunnel and deletes each one. Currently this is
implemented using list_for_each_safe, but because the list spinlock is
dropped in the loop body it's possible for other threads to manipulate
the list during list_for_each_safe's list walk. This can lead to the
list iterator being corrupted, leading to list_for_each_safe spinning.
One sequence of events which may lead to this is as follows:
* A tunnel is created, containing two sessions A and B.
* A thread closes the tunnel, triggering tunnel cleanup via the work
queue.
* l2tp_tunnel_closeall runs in the context of the work queue. It
removes session A from the tunnel session list, then drops the list
lock. At this point the list_for_each_safe temporary variable is
pointing to the other session on the list, which is session B, and
the list can be manipulated by other threads since the list lock has
been released.
* Userspace closes session B, which removes the session from its parent
tunnel via l2tp_session_delete. Since l2tp_tunnel_closeall has
released the tunnel list lock, l2tp_session_delete is able to call
list_del_init on the session B list node.
* Back on the work queue, l2tp_tunnel_closeall resumes execution and
will now spin forever on the same list entry until the underlying
session structure is freed, at which point UAF occurs.
The solution is to iterate over the tunnel's session list using
list_first_entry_not_null to avoid the possibility of the list
iterator pointing at a list item which may be removed during the walk.
Also, have l2tp_tunnel_closeall ref each session while it processes it
to prevent another thread from freeing it.
cpu1 cpu2
--- ---
pppol2tp_release()
spin_lock_bh(&tunnel->list_lock);
for (;;) {
session = list_first_entry_or_null(&tunnel->session_list,
struct l2tp_session, list);
if (!session)
break;
list_del_init(&session->list);
spin_unlock_bh(&tunnel->list_lock);
l2tp_session_delete(session);
l2tp_session_delete(session);
spin_lock_bh(&tunnel->list_lock);
}
spin_unlock_bh(&tunnel->list_lock);
Calling l2tp_session_delete on the same session twice isn't a problem
per-se, but if cpu2 manages to destruct the socket and unref the
session to zero before cpu1 progresses then it would lead to UAF.
Reported-by: syzbot+b471b7c936301a59745b@syzkaller.appspotmail.com
Reported-by: syzbot+c041b4ce3a6dfd1e63e2@syzkaller.appspotmail.com
Fixes: d18d3f0a24 ("l2tp: replace hlist with simple list for per-tunnel session list")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://patch.msgid.link/20240704152508.1923908-1-jchapman@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Microchip:
Support for writing "bitstream info" to the flash using the auto-update
driver. At this point the "bitstream info" is a glorified dtbo wrapper,
but there's plans to add more info there in the future. Additionally,
rework some allocations in the driver and use scope-based cleanup on
them.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZorOFAAKCRB4tDGHoIJi
0mnOAQCyWCj/tH+Cq5VEhW6NLYzkkiv/4fkE5mNrYiTuEPg1sAD+Lu6Cu9dvMgiy
hHLty4XT9CRV81yBWcBpViua1nkVwQ4=
=MbUu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=KCwt
-----END PGP SIGNATURE-----
Merge tag 'riscv-firmware-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V firmware drivers for v6.11
Microchip:
Support for writing "bitstream info" to the flash using the auto-update
driver. At this point the "bitstream info" is a glorified dtbo wrapper,
but there's plans to add more info there in the future. Additionally,
rework some allocations in the driver and use scope-based cleanup on
them.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-firmware-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
firmware: microchip: use scope-based cleanup where possible
firmware: microchip: move buffer allocation into mpfs_auto_update_set_image_address()
firmware: microchip: support writing bitstream info to flash
Link: https://lore.kernel.org/r/20240707-lukewarm-film-8a9da40a1c27@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
allowing dma on uarts connected to bluetooth modules and an update for
the gpu operating points on rk356x. As well as some minor fixes for
missing power-dmains and ethernet phy binding adherence.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmaMZvcQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgaSfCAC1TuxdQmBvHYAn1aLdGLYpU6u1ezvPynGg
eR9dyiQZPiDAyHMCuZl5E8shIb+hnGJtvPP2+sleb1YVEK+FHNPKYu7ZD36Z3aHW
I1YVSVFq6r/dq5LPBxhAs4It6mTQ9sBrEOHFluSuR/Ny/ERsxBBh2QdG6q0f6vlF
lwWTxvQtGpFMgvf+UVeNTmjEbA//Xnvi/BP4NyrQkfNAfeTHav1JlpEVbuKRt+2R
WpFk/RviET9MuclNbGBlq8U1ggPxWch/o8f6Qz1R7wVymgiHihJwFIFk0eAFKyKd
rTdf+H01KrDWkasAEsaWYG/4bWId+lppKVA0YUlk3sPRuiewAKl8
=VcOx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lz4I
-----END PGP SIGNATURE-----
Merge tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
These are two additional boards, the Xunlong Orange Pi 3B and
the Add Radxa ROCK 3B.
* tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
Link: https://lore.kernel.org/r/2191200.GUh0CODmnK@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With CM 3.5 the "core-other" register block evolves into the "redirect"
register block, which is capable of accessing not only the core local
registers of other cores but also the shared/global registers of other
clusters.
This patch generates accessor functions for shared/global registers
accessed via the redirect block, with "redir_" inserted after "gic_" in
their names. For example the accessor function:
read_gic_config()
...accesses the GIC_CONFIG register of the GIC in the local cluster.
With this patch a new function:
read_gic_redir_config()
...is added which accesses the GIC_CONFIG register of the GIC in
whichever cluster the GCR_CL_REDIRECT register is configured to access.
This mirrors the similar redirect block accessors already provided for
the CM & CPC.
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This patch introduces a couple of utility functions which help later
patches with introducing support for multi-cluster systems.
- mips_cps_multicluster_cpus() allows its caller to determine whether
the system includes CPUs spread across multiple clusters. This is
useful because in some cases behaviour can be more optimal taking
this knowledge into account. The means by which we check this is
dependent upon the way we probe CPUs & assign their numbers, so
keeping this knowledge confined here in arch/mips/ seems appropriate.
- mips_cps_first_online_in_cluster() allows its caller to determine
whether it is running upon the first CPU online within its cluster.
This information is useful in cases where some cluster-wide
configuration may need to occur, but should not be repeated if
another CPU in the cluster is already online. Similarly to the above
this is determined based upon knowledge of CPU numbering so it makes
sense to keep that knowledge in arch/mips/. The function is defined
in mips-cm.c rather than in asm/mips-cps.h in order to allow us to
use asm/cpu-info.h & linux/smp.h without encountering an include
nightmare.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Signed-off-by: Chao-ying Fu <cfu@wavecomp.com>
Signed-off-by: Dragan Mladjenovic <dragan.mladjenovic@syrmia.com>
Signed-off-by: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The logic for determining when to demote a glock in glock_work_func(),
introduced in commit 7cf8dcd3b6 ("GFS2: Automatically adjust glock min
hold time"), doesn't make sense: inode glocks have a minimum hold time
that delays demotion, while all other glocks are expected to be demoted
immediately. Instead of demoting non-inode glocks immediately,
glock_work_func() schedules glock work for them to be demoted, however.
Get rid of that unnecessary indirection.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
