Implement periodic dumping of the shared DSQ to demonstrate the use of the
newly added DSQ iterator.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: bpf@vger.kernel.org
DSQs are very opaque in the consumption path. The BPF scheduler has no way
of knowing which tasks are being considered and which is picked. This patch
adds BPF DSQ iterator.
- Allows iterating tasks queued on a DSQ in the dispatch order or reverse
from anywhere using bpf_for_each(scx_dsq) or calling the iterator kfuncs
directly.
- Has ordering guarantee where only tasks which were already queued when the
iteration started are visible and consumable during the iteration.
v5: - Add a comment to the naked list_empty(&dsq->list) test in
consume_dispatch_q() to explain the reasoning behind the lockless test
and by extension why nldsq_next_task() isn't used there.
- scx_qmap changes separated into its own patch.
v4: - bpf_iter_scx_dsq_new() declaration in common.bpf.h was using the wrong
type for the last argument (bool rev instead of u64 flags). Fix it.
v3: - Alexei pointed out that the iterator is too big to allocate on stack.
Added a prep patch to reduce the size of the cursor. Now
bpf_iter_scx_dsq is 48 bytes and bpf_iter_scx_dsq_kern is 40 bytes on
64bit.
- u32_before() comparison factored out.
v2: - scx_bpf_consume_task() is separated out into a separate patch.
- DSQ seq and iter flags don't need to be u64. Use u32.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Vernet <dvernet@meta.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: bpf@vger.kernel.org
struct scx_dsq_node contains two data structure nodes to link the containing
task to a DSQ and a flags field that is protected by the lock of the
associated DSQ. One reason why they are grouped into a struct is to use the
type independently as a cursor node when iterating tasks on a DSQ. However,
when iterating, the cursor only needs to be linked on the FIFO list and the
rb_node part ends up inflating the size of the iterator data structure
unnecessarily making it potentially too expensive to place it on stack.
Take ->priq and ->flags out of scx_dsq_node and put them in sched_ext_entity
as ->dsq_priq and ->dsq_flags, respectively. scx_dsq_node is renamed to
scx_dsq_list_node and the field names are renamed accordingly. This will
help implementing DSQ task iterator that can be allocated on stack.
No functional change intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: David Vernet <void@manifault.com>
Add clock generator node to device tree for SG2042, and enable clock for
uart.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Add compatible strings for the Arm Cortex-A725 and Cortex-A925 CPUs, as
well as new Neoverse cores: Arm Neoverse N3, Neoverse V2, Neoverse V3,
and Neoverse V3AE.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240618160450.3168005-1-andre.przywara@arm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
PCI devices and bridges DT nodes created during the PCI scan are created
with the interrupt-map property set to handle interrupts.
In order to set this interrupt-map property at a specific level, a
phandle to the parent interrupt controller is needed. On systems that
are not fully described by a device-tree, the parent interrupt
controller may be unavailable (i.e. not described by the device-tree).
As mentioned in the [1], avoiding the use of the interrupt-map property
and considering a PCI device as an interrupt controller itself avoid the
use of a parent interrupt phandle.
In that case, the PCI device itself as an interrupt controller is
responsible for routing the interrupts described in the device-tree
world (DT overlay) to the PCI interrupts.
Add the 'interrupt-controller' property in the PCI device DT node.
[1]: https://lore.kernel.org/lkml/CAL_Jsq+je7+9ATR=B6jXHjEJHjn24vQFs4Tvi9=vhDeK9n42Aw@mail.gmail.com/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240527161450.326615-18-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
APIs to add some properties in a changeset exist but nothing to add a DT
boolean property (i.e. a property without any values).
Fill this lack with of_changeset_add_prop_bool().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240527161450.326615-16-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
No test cases are present to test the of_changes_add_prop_*() function
family.
Add a new test to fill this lack.
Functions tested are:
- of_changes_add_prop_string()
- of_changes_add_prop_string_array()
- of_changeset_add_prop_u32()
- of_changeset_add_prop_u32_array()
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240527161450.326615-15-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The str_array parameter has no reason to be an un-const array.
Indeed, elements of the 'str_array' array are not changed by the code.
Constify the 'str_array' array parameter.
With this const qualifier added, the following construction is allowed:
static const char * const tab_str[] = { "string1", "string2" };
of_changeset_add_prop_string_array(..., tab_str, ARRAY_SIZE(tab_str));
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20240527161450.326615-14-herve.codina@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document the GPI DMA Engine on the SDX75 Platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240517100423.2006022-2-quic_rohiagar@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now all in-tree users have been updated with interrupt-names properties
according to commit 0076a37a42 ("dt-bindings: timer: renesas,tmu:
Document input capture interrupt"), make interrupt-names required.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/65fdd0425be0cc1bae9e6f7996aceaa5ad34e510.1716985947.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Some SoC like i.MX8MP or i.MX8QXP use a power-domain for this IP. Add
SoC-specific compatibles, which also requires a power-domain.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240528071141.92003-2-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The HX83100A is a bit of an outlier in the Himax HX831xxx series of
touch controllers as it requires reading touch events through the AHB
interface of the MCU rather than providing a dedicated FIFO address like
the other chips do.
This patch implements the specific read function and introduces the
HX83100A chip with an appropriate i2c ID and DT compatible string.
The HX83100A doesn't have a straightforward way to do chip
identification, which is why it is not implemented in this patch.
Tested on: Lenovo ThinkSmart View (CD-18781Y) / Innolux P080DDD-AB2 LCM
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Tested-by: Paul Gale <paul@siliconpixel.com>
Link: https://lore.kernel.org/r/20240620145019.156187-6-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation for HX83100A support allow defining separate functions
for specific chip operations.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240620145019.156187-5-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Implement reading from the MCU in a more universal fashion. This allows
properly handling reads of more than 4 bytes using the AHB FIFO
implemented in the chip.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Link: https://lore.kernel.org/r/20240620145019.156187-4-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add a compatible string for the Himax HX83100A touch controller.
The HX83100A presents touch events on the internal bus rather than
offering a dedicated event register like the other chips in this family
do.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240620145019.156187-2-felix@kaechele.ca
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that the input_dev->vals array is always there we can be assured
that input_pass_values() is always called with a non-0 number of
events. Remove the check.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-8-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Preallocate memory for holding event values (input_dev->vals) so that
there is no need to check if it was allocated or not in the event
processing code.
The amount of memory will be adjusted after input device has been fully
set up upon registering device with the input core.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-7-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation to have dev->vals memory pre-allocated rearrange
code in input_alloc_device() so that it allows handling multiple
points of failure.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-6-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Streamline event handling code by providing batch implementations for
filtering and event processing and using them in place of the main
event handler, as needed, instead of having complex branching logic
in the middle of the event processing code.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-5-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation to consolidating filtering and event processing in the
input core change events() method to return number of events processed
by it.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-4-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core expects input handlers to be either filters, or regular
handlers, but not both. Additionally, for regular handlers it does
not make sense to define both single event method and batch method.
Refuse registering handler if it defines more than one method.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input core favors ->events() (batch) method over ->event() method
if the former is defined, so there is no point in defining evdev_event()
as it is never called. Remove it.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240703213756.3375978-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038 is another variant of Imagis IST3038 IC, which has
a different register interface from IST3038C (possibly firmware defined).
Unlike IST3038C/IST3032C, IST3038 has different registers for commands,
which means IST3038 doesn't use protocol B.
Similar to IST3032C and maybe the other variants, IST3038 has touch keys
support, which provides KEY_APPSELECT and KEY_BACK.
Add support for IST3038 with touch keys.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240613025631.5425-4-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Imagis IST3038 is a variant of Imagis touchscreen IC. Document it in
imagis,ist3038c bindings.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240613025631.5425-3-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
protocol_b is a property, which tells Imagis panel to use a different
format for coordinates.
IST30XXC series is known for using protocol B, while the other series
aren't. Note this could be confusing, unlike the model name implies.
Adjust the usage of protocol_b to avoid confusion.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240613025631.5425-2-raymondhackley@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When probing, the hardware is not brought into a known state. This may
be a problem when a hypervisor restarts Linux without resetting the
hardware, leaving an old state running. Make sure the hardware gets
initialized, especially interrupts should be cleared and disabled.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/r/20240702045535.2000393-1-dirk.behme@de.bosch.com
Fixes: 6ccbe60713 ("i2c: add Renesas R-Car I2C driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Introduce i2c support to Airoha EN7581 SoC through the i2c-mt7621
driver.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Ray Liu <ray.liu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
`bt1_i2c_cfg` is not modified and can be declared as const to
move its data to a read-only section.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
xiic_start_xfer can fail for different reasons:
- EBUSY: bus is busy or i2c messages still in tx_msg or rx_msg
- ETIMEDOUT: timed-out trying to clear the RX fifo
- EINVAL: wrong clock settings
Both EINVAL and ETIMEDOUT will currently print a specific error
message followed by a generic one, for example:
Failed to clear rx fifo
Error xiic_start_xfer
however EBUSY will simply output the generic message:
Error xiic_start_xfer
which is not really helpful.
This commit adds a new error message when a busy condition is detected
and also removes the generic message since it does not provide any
relevant information to the user.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx
to newer DT schema. Created DT schema based on the .txt file
which had `compatible`, `reg`, `interrupts`, `clocks`,
`#address-cells` and `#size-cells` as required properties.
Additional changes to the original .txt binding
- added maintainer from the MAINTAINERS file.
- added resets property required by the corresponding DTS files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kanak Shilledar <kanakshilledar@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Bindings coding style expects 2- or 4-space indentation in the DTS
example. Correct files having something odd (6- or 8-space) to 4-space
while re-ordering few properties according to DTS coding style (the
first property should be compatible, then reg/ranges). No functional
impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reference the core I2C controller schema to properly define common
properties. This allows to drop several (now redundant) properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The reference i2c-controller.yaml already defines 'address-cells' and
'size-cells', so drop them from list of properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The reference i2c-controller.yaml already defines 'address-cells' and
'size-cells', so drop them from list of properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The reference i2c-controller.yaml already defines 'address-cells' and
'size-cells', so drop them from list of properties. Drop them as well
from required properties, even though i2c-controller.yaml does not
require them, because I2C controller could be enabled without any
children in DTS for user-space usage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
A device may need the controller up during suspend_noirq() or
resume_noirq().
But if the controller is autosuspended, there is no way to wakeup it during
suspend_noirq() or resume_noirq() because runtime pm is disabled at this
time.
The suspend() callback wakes up the controller, so it is available until
its suspend_noirq() callback (pm_runtime_force_suspend()).
During the resume, it's restored by resume_noirq() callback
(pm_runtime_force_resume()). Then resume() callback enables autosuspend.
So the controller is up during a little time slot in suspend and resume
sequences even if it's not used.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Replace SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() by
NOIRQ_SYSTEM_SLEEP_PM_OPS() and RUNTIME_PM_OPS().
The usage of pm_ptr() and these more recent macros allows the compiler to
see and drop the dead code.
The unnecessary '__maybe_unused' annotations on PM functions can be
removed.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-ccgx-ucsi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-ali1563.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-pxa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/i2c/busses/i2c-qup.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Provide a survey of the work-in-progress maturity (implementation
status) of various aspects of the CXL subsystem.
Clarify that in addition to ongoing upkeep relative to specification
updates, there are some long running themes in the driver that respond
to the discovery of new corner cases (bugs) and new use cases (feature
extensions).
The primary audience is distribution maintainers, but it also serves as
a guide for kernel developers to understand what aspects of the CXL
subsystem need more help. It is a landing page to document ongoing
progress, and a guide to discern exposure to work-in-progress features.
Reviewed-by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/172005486862.2048248.6668794717827294862.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The Xunlong Orange Pi 3B is a single-board computer based on the
Rockchip RK3566 SoC.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add devicetree binding for the Xunlong Orange Pi 3B board.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240626230319.1425316-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240627211737.1985549-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add devicetree binding documentation for the Radxa ROCK 3B board.
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240627211737.1985549-2-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
fence->ctx may be stale memory when trace_xe_hw_fence_free is called
resuling UAF bug when deriving the device name. This tracepoint is not
all that useful, so just drop it.
Fixes: 501c4255c4 ("drm/xe/trace: Print device_id in xe_trace events")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708211008.956384-1-matthew.brost@intel.com
