Now the implementation of stable_node_dup() causes chain()/chain_prune()
interfaces and usages are overcomplicated.
Why? stable_node_dup() only find and return a candidate stable_node for
sharing, so the users have to recheck using stable_node_dup_any() if any
non-candidate stable_node exist. And try to ksm_get_folio() from it
again.
Actually, stable_node_dup() can just return a best stable_node as it can,
then the users can check if it's a candidate for sharing or not.
The code is simplified too and fewer corner cases: such as stable_node and
stable_node_dup can't be NULL if returned tree_folio is not NULL.
Link: https://lkml.kernel.org/r/20240621-b4-ksm-scan-optimize-v2-3-1c328aa9e30b@linux.dev
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The code flow in cmp_and_merge_page() is suboptimal for handling the ksm
page and non-ksm page at the same time. For example:
- ksm page
1. Mostly just return if this ksm page is not migrated and this rmap_item
has been on the rmap hlist. Or we have to fix this rmap_item mapping.
2. But we absolutely don't need to checksum for this ksm page, since it
can't change.
- non-ksm page
1. First don't need to waste time searching stable tree if fast changing.
2. Should try to merge with zero page before search the stable tree.
3. Then search stable tree to find mergeable ksm page.
This patch optimizes the code flow so the handling differences between ksm
page and non-ksm page become clearer and more efficient too.
Link: https://lkml.kernel.org/r/20240621-b4-ksm-scan-optimize-v2-2-1c328aa9e30b@linux.dev
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/ksm: cmp_and_merge_page() optimizations and cleanup", v2.
This series mainly optimizes cmp_and_merge_page() to have more efficient
separate code flow for ksm page and non-ksm anon page.
- ksm page: don't need to calculate the checksum obviously.
- anon page: don't need to search stable tree if changing fast and try
to merge with zero page before searching ksm page on stable tree.
Please see the patch-2 for details.
Patch-3 is cleanup also a little optimization for the chain()/chain_prune
interfaces, which made the stable_tree_search()/stable_tree_insert() over
complex.
I have done simple testing using "hackbench -g 1 -l 300000" (maybe I need
to use a better workload) on my machine, have seen a little CPU usage
decrease of ksmd and some improvements of cmp_and_merge_page() latency:
We can see the latency of cmp_and_merge_page() when handling non-ksm anon
pages has been improved.
This patch (of 3):
In preparation for later changes, refactor out a new function called
try_to_merge_with_zero_page(), which tries to merge with zero page.
Link: https://lkml.kernel.org/r/20240621-b4-ksm-scan-optimize-v2-0-1c328aa9e30b@linux.dev
Link: https://lkml.kernel.org/r/20240621-b4-ksm-scan-optimize-v2-1-1c328aa9e30b@linux.dev
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When trying to allocate a hugepage with no reserved ones free, it may be
allowed in case a number of overcommit hugepages was configured (using
/proc/sys/vm/nr_overcommit_hugepages) and that number wasn't reached.
This allows for a behavior of having extra hugepages allocated
dynamically, if there're resources for it. Some sysadmins even prefer not
reserving any hugepages and setting a big number of overcommit hugepages.
But while attempting to allocate overcommit hugepages in a multi node
system (either NUMA or mempolicy/cpuset) said allocations might randomly
fail even when there're resources available for the allocation.
This happens due to allowed_mems_nr() only accounting for the number of
free hugepages in the nodes the current process belongs to and the surplus
hugepage allocation is done so it can be allocated in any node. In case
one or more of the requested surplus hugepages are allocated in a
different node, the whole allocation will fail due allowed_mems_nr()
returning a lower value.
So allocate surplus hugepages in one of the nodes the current process
belongs to.
Easy way to reproduce this issue is to use a 2+ NUMA nodes system:
# echo 0 >/proc/sys/vm/nr_hugepages
# echo 1 >/proc/sys/vm/nr_overcommit_hugepages
# numactl -m0 ./tools/testing/selftests/mm/map_hugetlb 2
Repeating the execution of map_hugetlb test application will eventually
fail when the hugepage ends up allocated in a different node.
[aris@ruivo.org: v2]
Link: https://lkml.kernel.org/r/20240701212343.GG844599@cathedrallabs.org
Link: https://lkml.kernel.org/r/20240621190050.mhxwb65zn37doegp@redhat.com
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Aristeu Rozanski <aris@ruivo.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vishal Moola <vishal.moola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The variable is supposed to be set via later migrate_pages() call.
However, the function does not do that when CONFIG_MIGRATION is unset.
Initialize the variable to zero.
Link: https://lkml.kernel.org/r/20240701165332.47495-1-sj@kernel.org
Fixes: 5311c0a2eee3 ("mm/damon/paddr: introduce DAMOS_MIGRATE_COLD action for demotion")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202406251102.GE07hqfQ-lkp@intel.com/
Cc: Honggyu Kim <honggyu.kim@sk.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Folios of order <= 1 are not in deferred list, the check of order is added
into folio_undo_large_rmappable() from commit 8897277acf ("mm: support
order-1 folios in the page cache"), but there is a repeated check for
small folio (order 0) during each call of the
folio_undo_large_rmappable(), so only keep folio_order() check inside the
function.
In addition, move all the checks into header file to save a function call
for non-large-rmappable or empty deferred_list folio.
Link: https://lkml.kernel.org/r/20240521130315.46072-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 1085b8276b ("tpm: Add the rest of the session HMAC API")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: d0a25bb961 ("tpm: Add HMAC session name/handle append")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().
Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 699e3efd6c ("tpm: Add HMAC session start and end functions")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Commit 31e0aa99dc ("ethtool: Veto some operations during firmware flashing process")
added a flag module_fw_flash_in_progress to struct net_device. As
this is ethtool related state, move it to the recently created
struct ethtool_netdev_state, accessed via the 'ethtool' member of
struct net_device.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240703121849.652893-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When rcu_barrier() calls rcu_rdp_cpu_online() and observes a CPU off
rnp->qsmaskinitnext, it means that all accesses from the offline CPU
preceding the CPUHP_TEARDOWN_CPU are visible to RCU barrier, including
callbacks expiration and counter updates.
However interrupts can still fire after stop_machine() re-enables
interrupts and before rcutree_report_cpu_dead(). The related accesses
happening between CPUHP_TEARDOWN_CPU and rnp->qsmaskinitnext clearing
are _NOT_ guaranteed to be seen by rcu_barrier() without proper
ordering, especially when callbacks are invoked there to the end, making
rcutree_migrate_callback() bypass barrier_lock.
The following theoretical race example can make rcu_barrier() hang:
CPU 0 CPU 1
----- -----
//cpu_down()
smpboot_park_threads()
//ksoftirqd is parked now
<IRQ>
rcu_sched_clock_irq()
invoke_rcu_core()
do_softirq()
rcu_core()
rcu_do_batch()
// callback storm
// rcu_do_batch() returns
// before completing all
// of them
// do_softirq also returns early because of
// timeout. It defers to ksoftirqd but
// it's parked
</IRQ>
stop_machine()
take_cpu_down()
rcu_barrier()
spin_lock(barrier_lock)
// observes rcu_segcblist_n_cbs(&rdp->cblist) != 0
<IRQ>
do_softirq()
rcu_core()
rcu_do_batch()
//completes all pending callbacks
//smp_mb() implied _after_ callback number dec
</IRQ>
rcutree_report_cpu_dead()
rnp->qsmaskinitnext &= ~rdp->grpmask;
rcutree_migrate_callback()
// no callback, early return without locking
// barrier_lock
//observes !rcu_rdp_cpu_online(rdp)
rcu_barrier_entrain()
rcu_segcblist_entrain()
// Observe rcu_segcblist_n_cbs(rsclp) == 0
// because no barrier between reading
// rnp->qsmaskinitnext and rsclp->len
rcu_segcblist_add_len()
smp_mb__before_atomic()
// will now observe the 0 count and empty
// list, but too late, we enqueue regardless
WRITE_ONCE(rsclp->len, rsclp->len + v);
// ignored barrier callback
// rcu barrier stall...
This could be solved with a read memory barrier, enforcing the message
passing between rnp->qsmaskinitnext and rsclp->len, matching the full
memory barrier after rsclp->len addition in rcu_segcblist_add_len()
performed at the end of rcu_do_batch().
However the rcu_barrier() is complicated enough and probably doesn't
need too many more subtleties. CPU down is a slowpath and the
barrier_lock seldom contended. Solve the issue with unconditionally
locking the barrier_lock on rcutree_migrate_callbacks(). This makes sure
that either rcu_barrier() sees the empty queue or its entrained
callback will be migrated.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_sync structure's ->gp_count field is always accessed under the
protection of that same structure's ->rss_lock field, with the exception
of a pair of WARN_ON_ONCE() calls just prior to acquiring that lock in
functions rcu_sync_exit() and rcu_sync_dtor(). These lockless accesses
are unnecessary and impair KCSAN's ability to catch bugs that might be
inserted via other lockless accesses.
This commit therefore moves those WARN_ON_ONCE() calls under the lock.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If a CPU is running either a userspace application or a guest OS in
nohz_full mode, it is possible for a system call to occur just as an
RCU grace period is starting. If that CPU also has the scheduling-clock
tick enabled for any reason (such as a second runnable task), and if the
system was booted with rcutree.use_softirq=0, then RCU can add insult to
injury by awakening that CPU's rcuc kthread, resulting in yet another
task and yet more OS jitter due to switching to that task, running it,
and switching back.
In addition, in the common case where that system call is not of
excessively long duration, awakening the rcuc task is pointless.
This pointlessness is due to the fact that the CPU will enter an extended
quiescent state upon returning to the userspace application or guest OS.
In this case, the rcuc kthread cannot do anything that the main RCU
grace-period kthread cannot do on its behalf, at least if it is given
a few additional milliseconds (for example, given the time duration
specified by rcutree.jiffies_till_first_fqs, give or take scheduling
delays).
This commit therefore adds a rcutree.nohz_full_patience_delay kernel
boot parameter that specifies the grace period age (in milliseconds,
rounded to jiffies) before which RCU will refrain from awakening the
rcuc kthread. Preliminary experimentation suggests a value of 1000,
that is, one second. Increasing rcutree.nohz_full_patience_delay will
increase grace-period latency and in turn increase memory footprint,
so systems with constrained memory might choose a smaller value.
Systems with less-aggressive OS-jitter requirements might choose the
default value of zero, which keeps the traditional immediate-wakeup
behavior, thus avoiding increases in grace-period latency.
[ paulmck: Apply Leonardo Bras feedback. ]
Link: https://lore.kernel.org/all/20240328171949.743211-1-leobras@redhat.com/
Reported-by: Leonardo Bras <leobras@redhat.com>
Suggested-by: Leonardo Bras <leobras@redhat.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Use max() to reduce 4 lines of code to a single line and improve its
readability.
Fixes the following Coccinelle/coccicheck warning reported by
minmax.cocci:
WARNING opportunity for max()
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on ARM systems
with ARCH == ARMv6K.
[ paulmck: Apply Arnd Bergmann and Nathan Chancellor feedback. ]
[ paulmck: Apply Linus Walleij feedback. ]
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/54798f68-48f7-4c65-9cba-47c0bf175143@sirena.org.uk/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/all/CA+G9fYuZ+pf6p8AXMZWtdFtX-gbG8HMaBKp=XbxcdzA_QeLkxQ@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Davis <afd@ti.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric DeVolder <eric.devolder@oracle.com>
Cc: Rob Herring <robh@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
This series adds QoS support for QNOC type device which can be found on
SC7280 platform. It adds support for programming priority,
priority forward disable and urgency forwarding. This helps in
priortizing the traffic originating from different interconnect masters
at NOC (Network On Chip).
* icc-rpmh-qos
dt-bindings: interconnect: add clock property to enable QOS on SC7280
interconnect: qcom: icc-rpmh: Add QoS configuration support
interconnect: qcom: sc7280: enable QoS configuration
interconnect: qcom: Fix DT backwards compatibility for QoS
Link: https://lore.kernel.org/r/20240607173927.26321-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add qos_clks_required flag to skip QoS configuration if clocks property
is not populated in devicetree for providers which require clocks to be
enabled for accessing registers. This is to keep the QoS configuration
backwards compatible with devices that have older DTB.
Reported-by: Bjorn Andersson <andersson@kernel.org>
Closes: https://lore.kernel.org/all/ciji6nlxn752ina4tmh6kwvek52nxpnguomqek6plwvwgvoqef@yrtexkpmn5br/
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Fixes: fbd908bb8b ("interconnect: qcom: sc7280: enable QoS configuration")
Link: https://lore.kernel.org/r/20240704125515.22194-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Fixed the PHY address and reset GPIOs (does not match the corresponding
pinctrl) for gmac0 and gmac1.
Fixes: b9f8ca655d ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240630150010.55729-7-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The R66S and R68S boards do not have HDMI output, so disable
the display subsystem.
Fixes: c79dab407a ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240701143028.1203997-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix the following error when booting:
[ 15.851853] platform fd800000.usb: deferred probe pending
[ 15.852384] platform fd840000.usb: deferred probe pending
[ 15.852881] platform fd880000.usb: deferred probe pending
This is due to usb2phy1 is not enabled. There is no USB 2.0
port on the board, just remove it.
Fixes: c79dab407a ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240630150010.55729-5-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fixes pmu_io_domains supply according to the schematic. Among them,
the vccio3 is responsible for the io voltage of sdcard. There is no
sdcard slot on the R68S, and it's connected to vcc_3v3, so describe
the supply of vccio3 separately.
Fixes: c79dab407a ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Fixes: b9f8ca655d ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240630150010.55729-4-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Remove the non-existent usb_host regulator and fix the supply according
to the schematic. Also remove the unnecessary always-on and boot-on for
the usb_otg regulator.
Fixes: c79dab407a ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20240701143028.1203997-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
`da9121_1ch_regmap_config` and `da9121_2ch_regmap_config` are not
modified and can be declared as const to move their data to a
read-only section.
The pointer that references those structs has been converted to const
accordingly.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20240704-regulator-const-regmap-v1-1-bce0ddef63ea@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been several attempts to set the dma-names property on the
SoC level (in rk356x.dtsi), but that appears to cause problems when set
on channels without flow control.
Quoting part of a previous attempt for clarification:
> Nah, enabling it for bluetooth is fine because you have flow control.
> My issues have been on channels without flow control. Without DMA it
> simply drops messages or the channel hangs until you close and reopen
> it. With DMA, when an overflow locks up the channel it is usually
> unavailable until the board is rebooted.
Setting it on the board level for the bluetooth connection was deemed
safe, so do so for the Quartz64 Model B.
This fixes the following error/warning:
of_dma_request_slave_channel: dma-names property of node
'/serial@fe650000' missing or empty
dw-apb-uart fe650000.serial: failed to request DMA
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://libera.irclog.whitequark.org/armlinux/2024-02-29
Link: https://lore.kernel.org/linux-rockchip/18284546.sWSEgdgrri@diego/
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240628120130.24076-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for voltage ranges to the GPU OPPs defined in the SoC dtsi for
Rockchip RK356x. This is, for example, useful for RK356x-based boards that
are designed to use the same power supply for the GPU and NPU portions of
the SoC, which is described further in the following documents:
- Rockchip RK3566 Hardware Design Guide, version 1.1.0, page 37
- Rockchip RK3568 Hardware Design Guide, version 1.2, page 78
The values for the exact GPU OPP voltages and the lower limits for the GPU
OPP voltage ranges differ from the values found in the vendor kernel source
(cf. downstream commit f8b9431ee38e ("arm64: dts: rockchip: rk3568: support
adjust opp-table by otp")), [1][2] and present the exact GPU OPP voltage
values that have served us well so far.
[1] f8b9431ee3
[2] https://raw.githubusercontent.com/rockchip-linux/kernel/f8b9431ee38ed561650be7092ab93f564598daa9/arch/arm64/boot/dts/rockchip/rk3568.dtsi
Suggested-by: Diederik de Haas <didi.debian@cknow.org>
Helped-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/7e9ba70fd54a21d6f1f267df11e0acabff8d24e0.1719763100.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rtl82xx DT bindings do not require ethernet-phy-ieee802.3-c22
as the fallback compatible string. There are fewer users of the
Realtek PHY compatible string with fallback compatible string than
there are users without fallback compatible string, so drop the
fallback compatible string from the few remaining users:
$ git grep -ho ethernet-phy-id001c....... | sort | uniq -c
1 ethernet-phy-id001c.c816",
2 ethernet-phy-id001c.c915",
2 ethernet-phy-id001c.c915";
5 ethernet-phy-id001c.c916",
13 ethernet-phy-id001c.c916";
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406290316.YvZdvLxu-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240630034910.173552-2-marex@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The iommu@fe043e00 on RK356x SoC shares the VOP power domain, but the
power-domains property was not provided when the node has been added.
The consequence is that an attempt to reload the rockchipdrm module will
freeze the entire system. That is because on probe time,
pm_runtime_get_suppliers() gets called for vop@fe040000, which blocks
when pm_runtime_get_sync() is being invoked for iommu@fe043e00.
Fix the issue by adding the missing property.
Fixes: 9d6c6d978f ("arm64: dts: rockchip: rk356x: Add VOP2 nodes")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240702-rk356x-fix-vop-mmu-v1-1-a66d1a0c45ea@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
CLK_NR_CLKS should not be part of the binding.
Remove since the kernel code no longer uses it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6f21c09b-e8d2-4749-aca6-572c79df775d@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The rtl82xx DT bindings do not require ethernet-phy-ieee802.3-c22
as the fallback compatible string. There are fewer users of the
Realtek PHY compatible string with fallback compatible string than
there are users without fallback compatible string, so drop the
fallback compatible string from the few remaining users:
$ git grep -ho ethernet-phy-id001c....... | sort | uniq -c
1 ethernet-phy-id001c.c816",
2 ethernet-phy-id001c.c915",
2 ethernet-phy-id001c.c915";
5 ethernet-phy-id001c.c916",
13 ethernet-phy-id001c.c916";
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406290316.YvZdvLxu-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240630034910.173552-1-marex@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Merge series from Herve Codina <herve.codina@bootlin.com>:
The qmc_audio driver supports only audio in interleaved mode.
Non-interleaved mode can be easily supported using several QMC channel
per DAI. In that case, data related to ch0 are sent to (received from)
the first QMC channel, data related to ch1 use the next QMC channel and
so on up to the last channel.
In terms of constraints and settings, the interleaved and
non-interleaved modes are slightly different.
In interleaved mode:
- The sample size should fit in the number of time-slots available for
the QMC channel.
- The number of audio channels should fit in the number of time-slots
(taking into account the sample size) available for the QMC channel.
In non-interleaved mode:
- The number of audio channels is the number of available QMC
channels.
- Each QMC channel should have the same number of time-slots.
- The sample size equals the number of time-slots of one QMC channel.
This series add support for the non-interleaved mode in the qmc_audio
driver and is composed of the following parts:
- Patches 1 and 2: Fix some issues in the qmc_audio
- Patches 3 to 6: Prepare qmc_audio for the non-interleaved mode
- Patches 7 and 8: Extend the QMC driver API
- Patches 9 and 10: The support for non-interleaved mode itself
Compared to the previous iteration, this v2 series mainly improves
qmc_audio_access_is_interleaved().
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:
Improve a bit the Qualcomm LPASS RX macro driver and align similar parts
of code with LPASS WSA macro driver for consistency.
No external dependencies.
-----BEGIN PGP SIGNATURE-----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=tyXO
-----END PGP SIGNATURE-----
Merge tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix folio refcounting when releasing them (encoded write, dummy
extent buffer)
- fix out of bounds read when checking qgroup inherit data
- fix how configurable chunk size is handled in zoned mode
- in the ref-verify tool, fix uninitialized return value when checking
extent owner ref and simple quota are not enabled
* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
btrfs: fix folio refcount in btrfs_do_encoded_write()
btrfs: fix uninitialized return value in the ref-verify tool
btrfs: always do the basic checks for btrfs_qgroup_inherit structure
btrfs: zoned: fix calc_available_free_space() for zoned mode
On the RZ/G2L SoC family, the direction of the Ethernet TXC/TX_CLK
signal is selectable to support an Ethernet PHY operating in either MII
or RGMII mode. By default, the signal is configured as an input and MII
mode is supported. The ETH_MODE register can be modified to configure
this signal as an output to support RGMII mode.
As this signal is by default an input, and can optionally be switched to
an output, it maps neatly onto an `output-enable` property in the device
tree.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-4-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The variable naming in the various OEN functions has been confusing. We
were passing the _pin & bit variables from rzg2l_pinctrl_pinconf_get()
and rzg2l_pinctrl_pinconf_set() as the offset & pin argument to the
oen_read() and oen_write() functions. This doesn't make sense, the first
of these isn't actually an offset and the second is not needed for
RZ/V2H but leads to confusion with the bit variable used within these
functions.
To tidy this up, instead pass the _pin variable directly to the
oen_read() and oen_write() functions with consistent naming. Then
rzg3s_read_oen() and rzg3s_write_oen() can use macros to get the port
and pin numbers it needs.
Instead of passing the pin capabilities into oen_read() and oen_write(),
check that the pin supports OEN before calling these functions.
Also, merge rzg3s_oen_is_supported() into rzg3s_pin_to_oen_bit() to give
a single translation function which returns an error if the pin doesn't
support OEN. While we're here, remove an unnecessary branch and clarify
the variable naming. Lastly, check that we are not dealing with a
dedicated pin before calling RZG2L_PIN_ID_TO_{PORT,PIN}().
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-3-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
We currently support OEN read/write for the RZ/G3S SoC but not the
RZ/G2L SoC family (consisting of RZ/G2L, RZ/G2LC, RZ/G2UL, RZ/V2L &
RZ/Five). The appropriate functions are renamed to clarify this and to
match the callback names.
We should also only set the oen_read and oen_write function pointers for
the devices which support these operations. This requires us to check
that these function pointers are valid before calling them.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240625200316.4282-2-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Breno Leitao says:
====================
crypto: caam: Unembed net_dev
This will un-embed the net_device struct from inside other struct, so we
can add flexible array into net_device.
This also enable COMPILE test for FSL_CAAM, as any config option that
depends on ARCH_LAYERSCAPE.
====================
Link: https://patch.msgid.link/20240702185557.3699991-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_devices from struct dpaa2_caam_priv_per_cpu by
converting them into pointers, and allocating them dynamically. Use the
leverage alloc_netdev_dummy() to allocate the net_device object at
dpaa2_dpseci_setup().
The free of the device occurs at dpaa2_dpseci_disable().
Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240702185557.3699991-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_devices from struct caam_qi_pcpu_priv by converting them
into pointers, and allocating them dynamically. Use the leverage
alloc_netdev_dummy() to allocate the net_device object at
caam_qi_init().
The free of the device occurs at caam_qi_shutdown().
Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240702185557.3699991-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As most of the drivers that depend on ARCH_LAYERSCAPE, make
CRYPTO_DEV_FSL_CAAM depend on COMPILE_TEST for compilation and testing.
# grep -r depends.\*ARCH_LAYERSCAPE.\*COMPILE_TEST | wc -l
29
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240702185557.3699991-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If caam module is built without OF support, the compiler returns the
following warning:
drivers/crypto/caam/ctrl.c:83:34: warning: 'imx8m_machine_match' defined but not used [-Wunused-const-variable=]
imx8m_machine_match is only referenced by of_match_node(), which is set
to NULL if CONFIG_OF is not set, as of commit 5762c20593 ("dt: Add
empty of_match_node() macro"):
#define of_match_node(_matches, _node) NULL
Do not create imx8m_machine_match if CONFIG_OF is not set.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407011309.cpTuOGdg-lkp@intel.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240702185557.3699991-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9.
We're trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new garbage
collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page,
in case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when
more queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=MZAG
-----END PGP SIGNATURE-----
Merge tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, wireless and netfilter.
There's one fix for power management with Intel's e1000e here,
Thorsten tells us there's another problem that started in v6.9. We're
trying to wrap that up but I don't think it's blocking.
Current release - new code bugs:
- wifi: mac80211: disable softirqs for queued frame handling
- af_unix: fix uninit-value in __unix_walk_scc(), with the new
garbage collection algo
Previous releases - regressions:
- Bluetooth:
- qca: fix BT enable failure for QCA6390 after warm reboot
- add quirk to ignore reserved PHY bits in LE Extended Adv Report,
abused by some Broadcom controllers found on Apple machines
- wifi: wilc1000: fix ies_len type in connect path
Previous releases - always broken:
- tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
avoid premature timeouts
- net: make sure skb_datagram_iter maps fragments page by page, in
case we somehow get compound highmem mixed in
- eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
queues are used
Misc:
- MAINTAINERS: Remembering Larry Finger"
* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
bnxt_en: Fix the resource check condition for RSS contexts
mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
inet_diag: Initialize pad field in struct inet_diag_req_v2
tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
selftests: make order checking verbose in msg_zerocopy selftest
selftests: fix OOM in msg_zerocopy selftest
ice: use proper macro for testing bit
ice: Reject pin requests with unsupported flags
ice: Don't process extts if PTP is disabled
ice: Fix improper extts handling
selftest: af_unix: Add test case for backtrack after finalising SCC.
af_unix: Fix uninit-value in __unix_walk_scc()
bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
net: rswitch: Avoid use-after-free in rswitch_poll()
netfilter: nf_tables: unconditionally flush pending work before notifier
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
...
Commit 202aa0d4bb ("thermal: core: Do not call handle_thermal_trip()
if zone temperature is invalid") caused __thermal_zone_device_update()
to return early if the current thermal zone temperature was invalid.
This was done to avoid running handle_thermal_trip() and governor
callbacks in that case which led to confusion. However, it went too
far because monitor_thermal_zone() still needs to be called even when
the zone temperature is invalid to ensure that it will be updated
eventually in case thermal polling is enabled and the driver has no
other means to notify the core of zone temperature changes (for example,
it does not register an interrupt handler or ACPI notifier).
Also if the .set_trips() zone callback is expected to set up monitoring
interrupts for a thermal zone, it has to be provided with valid
boundaries and that can only happen if the zone temperature is known.
Accordingly, to ensure that __thermal_zone_device_update() will
run again after a failing zone temperature check, make it call
monitor_thermal_zone() regardless of whether or not the zone
temperature is valid and make the latter schedule a thermal zone
temperature update if the zone temperature is invalid even if
polling is not enabled for the thermal zone.
Fixes: 202aa0d4bb ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2764814.mvXUDI8C0e@rjwysocki.net
[ rjw: Changed THERMAL_RECHECK_DELAY_MS to 250 ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
