Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-17-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-16-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-15-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-14-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-13-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-12-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-11-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-10-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-9-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-8-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-7-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-6-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Only change the driver's backlight device, but leave the LCD
device as-is.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-5-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-4-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Replace FB_BLANK_ constants with their counterparts from the
backlight subsystem. The values are identical, so there's no
change in functionality.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-3-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Duplicate FB_BLANK_ constants as BACKLIGHT_POWER__ constants in the
backlight header file. Allows backlight drivers to avoid including
the fbdev header file and removes a compile-time dependency between
the two subsystems.
The new BACKLIGHT_POWER_ constants have the same values as their
FB_BLANK_ counterparts. Hence UAPI and internal semantics do not
change. The backlight drivers can be converted one by one. Each
instance of FB_BLANK_UNBLANK becomes BACKLIGHT_POWER_ON, each of
FB_BLANK_POWERDOWN becomes BACKLIGHT_POWER_OFF, and FB_BLANK_NORMAL
becomes BACKLIGHT_POWER_REDUCED.
Backlight code or drivers do not use FB_BLANK_VSYNC_SUSPEND and
FB_BLANK_HSYNC_SUSPEND, so no new constants for these are being
added.
The semantics of FB_BLANK_NORMAL appear inconsistent. In fbdev,
NORMAL means display off with sync enabled. In backlight code,
this translates to turn the backlight off, but some drivers
interpret it as backlight on. So we keep the current code as is,
but mark BACKLIGHT_POWER_REDUCED as deprecated. Drivers should be
fixed and the constant removed. This affects ams369fg06 and a few
DRM panel drivers.
v2:
- rename BL_CORE_ power constants to BACKLIGHT_POWER_ (Sam)
- fix documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240624152033.25016-2-tzimmermann@suse.de
Signed-off-by: Lee Jones <lee@kernel.org>
Convert sprintf to the much safer sysfs_emit API to handle output for
sysfs.
Also better handle situation where on the same chip there may be LED
open and shorted at the same time.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626221520.2846-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
For varying privacy and security reasons, sometimes we would like to
completely silence the _serial_ console, and only enable it when needed.
But there are many existing systems that depend on this _serial_ console,
so add acpi=nospcr to disable console in ACPI SPCR table as default
_serial_ console.
Signed-off-by: Liu Wei <liuwei09@cestc.cn>
Suggested-by: Prarit Bhargava <prarit@redhat.com>
Suggested-by: Will Deacon <will@kernel.org>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Link: https://lore.kernel.org/r/20240625030504.58025-1-liuwei09@cestc.cn
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Set "Speaker Force Firmware Load" as the common kcontrol
for both tas27871 and tas2563 and move it into newly-created
tasdevice_snd_controls, and keep the digital gain and analog
gain in tas2781_snd_controls.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240704094939.1824-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been multiple reports that the multi-mode support in the
OMAP2 McSPI driver has caused regressions on existing systems. There's
been some discussion and some proposed changes but nothing that's been
tested by all the reporters. Drop the patch for v6.10, hopefully we can
get to the bottom of the issue and reenable the feature for v6.11.
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Reported-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Fixes: e64d3b6fc9 ("spi: omap2-mcpsi: Enable MULTI-mode in more situations")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240704-spi-revert-omap2-multi-v1-1-69357ef13fdc@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
parallel_test() function in vringh_test needs to verify
the creation of the guest/host pipe.
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Message-Id: <20240624174905.27980-2-yskelg@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are two issues around seqpacket_allow:
1. seqpacket_allow is not initialized when socket is
created. Thus if features are never set, it will be
read uninitialized.
2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared,
then seqpacket_allow will not be cleared appropriately
(existing apps I know about don't usually do this but
it's legal and there's no way to be sure no one relies
on this).
To fix:
- initialize seqpacket_allow after allocation
- set it unconditionally in set_features
Reported-by: syzbot+6c21aeb59d0e82eb2782@syzkaller.appspotmail.com
Reported-by: Jeongjun Park <aha310510@gmail.com>
Fixes: ced7b71371 ("vhost/vsock: support SEQPACKET for transport").
Tested-by: Arseny Krasnov <arseny.krasnov@kaspersky.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240422100010-mutt-send-email-mst@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Avoid copying when we failed to, or didn't have any mounts to list.
Fixes: cb54ef4f05 ("fs: don't copy to userspace under namespace semaphore") # mainline only
Signed-off-by: Christian Brauner <brauner@kernel.org>
All PCIe controllers found on X1E80100 have MHI register region.
So change the schema to reflect that.
Fixes: 692eadd516 ("dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller")
Link: https://lore.kernel.org/linux-pci/20240605-x1e80100-pci-bindings-fix-v2-1-c465e87966fc@linaro.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add a way for firmware to tell the OS that ATS is supported by the PCI
root complex. An endpoint with ATS enabled may send Translation Requests
and Translated Memory Requests, which look just like Normal Memory
Requests with a non-zero AT field. So a root controller that ignores the
AT field may simply forward the request to the IOMMU as a Normal Memory
Request, which could end badly. In any case, the endpoint will be
unusable.
The ats-supported property allows the OS to only enable ATS in endpoints
if the root controller can handle ATS requests. Only add the property to
pcie-host-ecam-generic for the moment. For non-generic root controllers,
availability of ATS can be inferred from the compatible string.
Link: https://lore.kernel.org/linux-pci/20240607105415.2501934-3-jean-philippe@linaro.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
MediaTek MT7621 PCIe sub-system supports a single Root Complex (RC)
with 3 Root Ports. Add PCIe host topology ASCII graph to the binding
for completeness.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/linux-pci/20240522044321.3205160-1-sergio.paracuellos@gmail.com
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
PCIe needs to choose the appropriate performance state of RPMh power
domain based on the PCIe gen speed.
Adding the Operating Performance Points table allows to adjust power
domain performance state and ICC peak bw, depending on the PCIe data
rate and link width.
Link: https://lore.kernel.org/linux-pci/20240619-opp_support-v15-2-aa769a2173a3@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The current configuration had non-prefetchable memory overlapping with
bridge registers by 64KB from base address.
This patch fixes the 'ranges' property in the device tree by adjusting
the non-prefetchable memory addresses beyond the 64KB mark to prevent
conflicts.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240624111022.133780-1-thippesw@amd.com
Signed-off-by: Thippeswamy Havalige <thippesw@amd.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
There are two issues related to epf_ntb_epc_cleanup():
1) It should call epf_ntb_config_sspad_bar_clear()
2) The epf_ntb_bind() function should call epf_ntb_epc_cleanup()
to cleanup.
I also changed the ordering a bit. Unwinding should be done in the
mirror order from how they are allocated.
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Link: https://lore.kernel.org/linux-pci/aaffbe8d-7094-4083-8146-185f4a84e8a1@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Smatch complains about inconsistent NULL checking in vpci_scan_bus():
drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021)
Instead of printing an error message and then crashing we should return
an error code and clean up.
Also the NULL check is reversed so it prints an error for success
instead of failure.
Fixes: e35f56bb03 ("PCI: endpoint: Support NTB transfer between RC and EP")
Link: https://lore.kernel.org/linux-pci/68e0f6a4-fd57-45d0-945b-0876f2c8cb86@moroto.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Now that the driver core allows for struct class to be in read-only
memory, we should make all 'class' structures declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at runtime.
Link: https://lore.kernel.org/linux-pci/2024061011-citable-herbicide-1095@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
As like the 'epc_init' event, that is used to signal the EPF drivers about
the EPC initialization, let's introduce 'epc_deinit' event that is used to
signal EPC deinitialization.
The EPC deinitialization applies only when any sort of fundamental reset
is supported by the endpoint controller as per the PCIe spec.
Reference: PCIe r6.0, sec 4.2.5.9.1 and 6.6.1.
Currently, some EPC drivers like pcie-qcom-ep and pcie-tegra194 support
PERST# as the fundamental reset. So the 'deinit' event will be notified to
the EPF drivers when PERST# assert happens in the above mentioned EPC
drivers.
The EPF drivers, on receiving the event through the epc_deinit() callback
should reset the EPF state machine and also cleanup any configuration that
got affected by the fundamental reset like BAR, DMA etc...
This change also warrants skipping the cleanups in unbind() if already done
in epc_deinit().
Link: https://lore.kernel.org/r/20240606-pci-deinit-v1-2-4395534520dc@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
While creating a new RSS context, bnxt_rfs_capable() currently
makes a strict check to see if the required VNICs are already
available. If the current VNICs are not what is required,
either too many or not enough, it will call the firmware to
reserve the exact number required.
There is a bug in the firmware when the driver tries to
relinquish some reserved VNICs and RSS contexts. It will
cause the default VNIC to lose its RSS configuration and
cause receive packets to be placed incorrectly.
Workaround this problem by skipping the resource reduction.
The driver will not reduce the VNIC and RSS context reservations
when a context is deleted. The resources will be available for
use when new contexts are created later.
Potentially, this workaround can cause us to run out of VNIC
and RSS contexts if there are a lot of VF functions creating
and deleting RSS contexts. In the future, we will conditionally
disable this workaround when the firmware fix is available.
Fixes: 438ba39b25 ("bnxt_en: Improve RSS context reservation infrastructure")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/netdev/20240625010210.2002310-1-kuba@kernel.org/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240703180112.78590-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of invalid INI file mlxsw_linecard_types_init() deallocates memory
but doesn't reset pointer to NULL and returns 0. In case of any error
occurred after mlxsw_linecard_types_init() call, mlxsw_linecards_init()
calls mlxsw_linecard_types_fini() which performs memory deallocation again.
Add pointer reset to NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b217127e5e ("mlxsw: core_linecards: Add line card objects and implement provisioning")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20240703203251.8871-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hopefully the last fixes for v6.10. Fix a regression in wilc1000 where
bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmaGg5gRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtLbQf/XjGiuuYQ/8i9gDGpKmR3T6lXTXoB5eHw
AiC+WN8Hi0cko4oekVI9xGqCPoMwz3IwhdgO+Rmd0EoiAV3REFsxyRYaZ8z9T6tf
cb58jdAY9X+nVzHnGosTibs31K80d5PqcuRNr4jsws5Fuu/f6OhLoiCDaRlLb+aR
YFmts2Z3gA6pNzK6gFMzGURpfSSQ0ZsJk/myAAWw+63KHKbUB8+GcSBqd+EsJe6O
AHXbhim1W5IOD7JdIq7zV9lwZaNH646oQG4nwZr20IWonaQf/d1EiqE4tcqKtoMw
qR2qW4mcNm80JXhOojXgKPdykQXe4DSo0FCnGyGGLtn59jlRrPM+uw==
=mgXX
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.10
Hopefully the last fixes for v6.10. Fix a regression in wilc1000
where bitrate Information Elements longer than 255 bytes were broken.
Few fixes also to mac80211 and iwlwifi.
* tag 'wireless-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
wifi: iwlwifi: mvm: avoid link lookup in statistics
wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
wifi: wilc1000: fix ies_len type in connect path
wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP
====================
Link: https://patch.msgid.link/20240704111431.11DEDC3277B@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move allocation tagging specific code in the allocation path into
alloc_tagging_slab_alloc_hook, similar to how freeing path uses
alloc_tagging_slab_free_hook. No functional changes, just code
cleanup.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
* for-joerg/arm-smmu/updates: (29 commits)
iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init
iommu/arm-smmu-v3: Enable HTTU for stage1 with io-pgtable mapping
iommu/arm-smmu-v3: Add support for dirty tracking in domain alloc
iommu/io-pgtable-arm: Add read_and_clear_dirty() support
iommu/arm-smmu-v3: Add feature detection for HTTU
iommu/arm-smmu-v3: Add support for domain_alloc_user fn
iommu/arm-smmu-qcom: record reason for deferring probe
iommu/arm-smmu: Pretty-print context fault related regs
iommu/arm-smmu-qcom-debug: Do not print for handled faults
iommu/arm-smmu: Add CB prefix to register bitfields
iommu/arm-smmu-v3: add missing MODULE_DESCRIPTION() macro
iommu/arm-smmu-v3: Shrink the strtab l1_desc array
iommu/arm-smmu-v3: Do not zero the strtab twice
iommu/arm-smmu-v3: Allow setting a S1 domain to a PASID
iommu/arm-smmu-v3: Allow a PASID to be set when RID is IDENTITY/BLOCKED
iommu/arm-smmu-v3: Test the STE S1DSS functionality
iommu/arm-smmu-v3: Allow IDENTITY/BLOCKED to be set while PASID is used
iommu/arm-smmu-v3: Put the SVA mmu notifier in the smmu_domain
iommu/arm-smmu-v3: Keep track of arm_smmu_master_domain for SVA
iommu/arm-smmu-v3: Make SVA allocate a normal arm_smmu_domain
...
Most of memory.rst was written very early, at a time where TBI (Top
Byte Ignore) was not enabled. Nowadays TBI0 is always enabled, and
TBI1 may be enabled, depending on the kernel configuration. This
means that VA bits 63:56 cannot generally be assumed to have any
particular value.
Regardless of TBI, TTBRx selection is done based on bit 55; update
memory.rst accordingly.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240702091349.356008-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
For uncore PMUs, a single context is shared across all CPUs in a domain.
The domain can be a CCX, like in the case of the L3 PMU, or a socket,
like in the case of DF and UMC PMUs. This information is available via
the PMU's cpumask.
For contexts shared across a socket, the domain is currently determined
from topology_die_id() which is incorrect after the introduction of
commit 63edbaa48a ("x86/cpu/topology: Add support for the AMD
0x80000026 leaf") as it now returns a CCX identifier on Zen 4 and later
systems which support CPUID leaf 0x80000026.
Use topology_logical_package_id() instead as it always returns a socket
identifier irrespective of the availability of CPUID leaf 0x80000026.
Fixes: 63edbaa48a ("x86/cpu/topology: Add support for the AMD 0x80000026 leaf")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240626074942.1044818-1-sandipan.das@amd.com
X86_FEATURE_PERFCTR_NB and X86_FEATURE_PERFCTR_LLC are derived from
CPUID leaf 0x80000001 ECX bits 24 and 28 respectively and denote the
availability of DF and L3 counters. When these bits are not set, the
corresponding PMUs have no counters and hence, should not be registered.
Fixes: 07888daa05 ("perf/x86/amd/uncore: Move discovery and registration")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240626074404.1044230-1-sandipan.das@amd.com
The architectural performance monitoring V6 supports a new range of
counters' MSRs in the 19xxH address range. They include all the GP
counter MSRs, the GP control MSRs, and the fixed counter MSRs.
The step between each sibling counter is 4. Add intel_pmu_addr_offset()
to calculate the correct offset.
Add fixedctr in struct x86_pmu to store the address of the fixed counter
0. It can be used to calculate the rest of the fixed counters.
The MSR address of the fixed counter control is not changed.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-9-kan.liang@linux.intel.com
Two new fields (the unit mask2, and the equal flag) are added in the
IA32_PERFEVTSELx MSRs. They can be enumerated by the CPUID.23H.0.EBX.
Update the config_mask in x86_pmu and x86_hybrid_pmu for the true layout
of the PERFEVTSEL.
Expose the new formats into sysfs if they are available. The umask
extension reuses the same format attr name "umask" as the previous
umask. Add umask2_show to determine/display the correct format
for the current machine.
Co-developed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-8-kan.liang@linux.intel.com
