The number of transmit and receive descriptors must be a multiple of 128
due to the hardware limitation. If it is set to a multiple of 8 instead of
a multiple 128, the queues will easily be hung.
Cc: stable@vger.kernel.org
Fixes: 883b5984a5 ("net: wangxun: add ethtool_ops for ring parameters")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240910095629.570674-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: fallback to TCP after 3 MPC drop + cache
The SYN + MPTCP_CAPABLE packets could be explicitly dropped by firewalls
somewhere in the network, e.g. if they decide to drop packets based on
the TCP options, instead of stripping them off.
The idea of this series is to fallback to TCP after 3 SYN+MPC drop
(patch 2). If the connection succeeds after the fallback, it very likely
means a blackhole has been detected. In this case (patch 3), MPTCP can
be disabled for a certain period of time, 1h by default. If after this
period, MPTCP is still blocked, the period is doubled. This technique is
inspired by the one used by TCP FastOpen.
This should help applications which want to use MPTCP by default on the
client side if available.
====================
Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-0-da7ebb4cd2a3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An MPTCP firewall blackhole can be detected if the following SYN
retransmission after a fallback to "plain" TCP is accepted.
In case of blackhole, a similar technique to the one in place with TFO
is now used: MPTCP can be disabled for a certain period of time, 1h by
default. This time period will grow exponentially when more blackhole
issues get detected right after MPTCP is re-enabled and will reset to
the initial value when the blackhole issue goes away.
The blackhole period can be modified thanks to a new sysctl knob:
blackhole_timeout. Two new MIB counters help understanding what's
happening:
- 'Blackhole', incremented when a blackhole is detected.
- 'MPCapableSYNTXDisabled', incremented when an MPTCP connection
directly falls back to TCP during the blackhole period.
Because the technique is inspired by the one used by TFO, an important
part of the new code is similar to what can find in tcp_fastopen.c, with
some adaptations to the MPTCP case.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/57
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-3-da7ebb4cd2a3@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TAS module could not be configured when it's running in pending
status. We need disable the module and configure it again. However, the
pending status is not cleared after the module disabled. TC taprio set
will always return busy even it's disabled.
For example, a user uses tc-taprio to configure Qbv and a future
basetime. The TAS module will run in a pending status. There is no way
to reconfigure Qbv, it always returns busy.
Actually the TAS module can be reconfigured when it's disabled. So it
doesn't need to check the pending status if the TAS module is disabled.
After the patch, user can delete the tc taprio configuration to disable
Qbv and reconfigure it again.
Fixes: de143c0e27 ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload")
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Link: https://patch.msgid.link/20240906093550.29985-1-xiaoliang.yang_1@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the function hsr_proxy_annouance() added in the previous commit
5f703ce5c9 ("net: hsr: Send supervisory frames to HSR network
with ProxyNodeTable data"), the return value of the hsr_port_get_hsr()
function is not checked to be a NULL pointer, which causes a NULL
pointer dereference.
To solve this, we need to add code to check whether the return value
of hsr_port_get_hsr() is NULL.
Reported-by: syzbot+02a42d9b1bd395cbcab4@syzkaller.appspotmail.com
Fixes: 5f703ce5c9 ("net: hsr: Send supervisory frames to HSR network with ProxyNodeTable data")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lukasz Majewski <lukma@denx.de>
Link: https://patch.msgid.link/20240907190341.162289-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove interlink_sequence_nr which is unused.
[ bigeasy: split out from Eric's patch ].
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240906132816.657485-3-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported that the seqnr_lock is not acquire for frames received
over the interlink port. In the interlink case a new seqnr is generated
and assigned to the frame.
Frames, which are received over the slave port have already a sequence
number assigned so the lock is not required.
Acquire the hsr_priv::seqnr_lock during in the invocation of
hsr_forward_skb() if a packet has been received from the interlink port.
Reported-by: syzbot+3d602af7549af539274e@syzkaller.appspotmail.com
Closes: https://groups.google.com/g/syzkaller-bugs/c/KppVvGviGg4/m/EItSdCZdBAAJ
Fixes: 5055cccfc2 ("net: hsr: Provide RedBox support (HSR-SAN)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Lukasz Majewski <lukma@denx.de>
Link: https://patch.msgid.link/20240906132816.657485-2-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The V3(s) will detect a valid external low frequency clock and if it is
not present will automatically switch to the internal one. This might
hide bugs and (hardware) configuration errors. It's even worse because
the internal RTC runs significantly slower (32.000Hz vs 32.768Hz).
Fortunately for us, the V3(s) has an (undocumented) bypass of this
switching and the driver already supports it by setting the
.has_auto_swt flag.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20240730194905.2587202-1-mwalle@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Several compatibles documented in trivial-rtc.yaml are documented
elsewhere and are not trivial, so drop them.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240910234431.1043923-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Matthieu Baerts says:
====================
selftests: mptcp: misc. small fixes
Here are some various fixes for the MPTCP selftests.
Patch 1 fixes a recently modified test to continue to work as expected
on older kernels. This is a fix for a recent fix that can be backported
up to v5.15.
Patch 2 and 3 include dependences when exporting or installing the
tests. Two fixes for v6.11-rc1.
====================
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-0-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, the net_helper.sh file from the parent
directory is used by the MPTCP selftests and it needs to be present when
running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: 1af3bc912e ("selftests: mptcp: lib: use wait_local_port_listen helper")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-3-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lib.sh file from the parent directory is used by the MPTCP selftests
and it needs to be present when running the tests.
This file then needs to be listed in the Makefile to be included when
exporting or installing the tests, e.g. with:
make -C tools/testing/selftests \
TARGETS=net/mptcp \
install INSTALL_PATH=$KSFT_INSTALL_PATH
cd $KSFT_INSTALL_PATH
./run_kselftest.sh -c net/mptcp
Fixes: f265d3119a ("selftests: mptcp: lib: use setup/cleanup_ns helpers")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-2-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new endpoint using the IP of the initial subflow has been recently
added to increase the code coverage. But it breaks the test when using
old kernels not having commit 86e39e0448 ("mptcp: keep track of local
endpoint still available for each msk"), e.g. on v5.15.
Similar to commit d4c81bbb86 ("selftests: mptcp: join: support local
endpoint being tracked or not"), it is possible to add the new endpoint
conditionally, by checking if "mptcp_pm_subflow_check_next" is present
in kallsyms: this is not directly linked to the commit introducing this
symbol but for the parent one which is linked anyway. So we can know in
advance what will be the expected behaviour, and add the new endpoint
only when it makes sense to do so.
Fixes: 4878f9f842 ("selftests: mptcp: join: validate fullmesh endp on 1st sf")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-1-8f124aa9156d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running in container environmment, /sys/fs/cgroup/ might not be
the real root node of the sk-attached cgroup.
Example:
In container:
% stat /sys//fs/cgroup/
Device: 0,21 Inode: 2214 ..
% stat /sys/fs/cgroup/foo
Device: 0,21 Inode: 2264 ..
The expectation would be for:
nft add rule .. socket cgroupv2 level 1 "foo" counter
to match traffic from a process that got added to "foo" via
"echo $pid > /sys/fs/cgroup/foo/cgroup.procs".
However, 'level 3' is needed to make this work.
Seen from initial namespace, the complete hierarchy is:
% stat /sys/fs/cgroup/system.slice/docker-.../foo
Device: 0,21 Inode: 2264 ..
i.e. hierarchy is
0 1 2 3
/ -> system.slice -> docker-1... -> foo
... but the container doesn't know that its "/" is the "docker-1.."
cgroup. Current code will retrieve the 'system.slice' cgroup node
and store its kn->id in the destination register, so compare with
2264 ("foo" cgroup id) will not match.
Fetch "/" cgroup from ->init() and add its level to the level we try to
extract. cgroup root-level is 0 for the init-namespace or the level
of the ancestor that is exposed as the cgroup root inside the container.
In the above case, cgrp->level of "/" resolved in the container is 2
(docker-1...scope/) and request for 'level 1' will get adjusted
to fetch the actual level (3).
v2: use CONFIG_SOCK_CGROUP_DATA, eval function depends on it.
(kernel test robot)
Cc: cgroups@vger.kernel.org
Fixes: e0bb96db96 ("netfilter: nft_socket: add support for cgroupsv2")
Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We must put 'sk' reference before returning.
Fixes: 039b1f4f24 ("netfilter: nft_socket: fix erroneous socket assignment")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There's no need to list "s35390a" in the DT match table. The I2C core
will strip any vendor prefix and match against the i2c_device_id table
which has an "s35390a" entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240826191321.1410668-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert the Spreadtrum SC2731 RTC bindings to DT schema.
Rename file to match compatible.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/ZolsyEC8eeJWNIb6@standask-GA-A55M-S2HP
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
In accordance with the existing comment and code analysis
it is quite likely that there is a missed 'else' when adapter
times out. Add it.
Fixes: 5bc1200852 ("i2c: Add Intel SCH SMBus support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org> # v2.6.27+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==================================================================
[ 37.254394] Disabling lock debugging due to kernel taint
0+1 records in
0+1 records out
3 bytes copied, 0.335911 s, 0.0 kB/s
Fixes: a5356aef6a ("spi: spi-mem: Add driver for NXP FlexSPI controller")
Cc: stable@kernel.org
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the values of the symbolic constants that define the valid linkages
for functions and variables explicit.
Signed-off-by: Will Hawkins <hawkinsw@obs.cr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240911055033.2084881-1-hawkinsw@obs.cr
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbhVykRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZtxgAf+J9om4LIpVd6hNT/hlkLf0jOlIkoOmbYT
16+g/dYRher0HJUMO/gcmubBO8dPmxopQEkR7XvkEqV72EAYcaDcios94cj0Uv1F
GbnixnO3VvCOE86PoOruM+WHT6ct9+ECWB6yODnF7Pps+WNrzhVTfmXm4j8vWnFH
KyHD/Hy4VsPDzj0EmzAC4ppkLMWfWypDbP4PBIOq9s+Oj6gJ671amWjmgFou+o9K
yOtNTBiBaVuBrkv5sJTbQIDkAvK2V9im2VTjrZej2a/3wm6+z3XM28tWbcsYJEyS
U2ZpHkS6QXlNaL4B8lDc6OP/c/xwM1CkzZsKe9p3T6iRemA0WLWaSg==
=gaJv
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.12
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
* tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: brcmfmac: cfg80211: Convert comma to semicolon
wifi: rsi: Remove an unused field in struct rsi_debugfs
wifi: libertas: Cleanup unused declarations
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe()
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()
wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors
wifi: cfg80211: fix kernel-doc for per-link data
wifi: mt76: mt7925: replace chan config with extend txpower config for clc
wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
wifi: mt76: mt7615: check devm_kasprintf() returned value
wifi: mt76: mt7925: convert comma to semicolon
wifi: mt76: mt7925: fix a potential association failure upon resuming
wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings
wifi: mt76: mt7921: Check devm_kasprintf() returned value
wifi: mt76: mt7915: check devm_kasprintf() returned value
wifi: mt76: mt7915: avoid long MCU command timeouts during SER
wifi: mt76: mt7996: fix uninitialized TLV data
...
====================
Link: https://patch.msgid.link/20240911084147.A205DC4AF0F@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Salvatore Benedetto reported an issue that when doing syscall tracepoint
tracing the kernel stack is empty. For example, using the following
command line
bpftrace -e 'tracepoint:syscalls:sys_enter_read { print("Kernel Stack\n"); print(kstack()); }'
bpftrace -e 'tracepoint:syscalls:sys_exit_read { print("Kernel Stack\n"); print(kstack()); }'
the output for both commands is
===
Kernel Stack
===
Further analysis shows that pt_regs used for bpf syscall tracepoint
tracing is from the one constructed during user->kernel transition.
The call stack looks like
perf_syscall_enter+0x88/0x7c0
trace_sys_enter+0x41/0x80
syscall_trace_enter+0x100/0x160
do_syscall_64+0x38/0xf0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The ip address stored in pt_regs is from user space hence no kernel
stack is printed.
To fix the issue, kernel address from pt_regs is required.
In kernel repo, there are already a few cases like this. For example,
in kernel/trace/bpf_trace.c, several perf_fetch_caller_regs(fake_regs_ptr)
instances are used to supply ip address or use ip address to construct
call stack.
Instead of allocate fake_regs in the stack which may consume
a lot of bytes, the function perf_trace_buf_alloc() in
perf_syscall_{enter, exit}() is leveraged to create fake_regs,
which will be passed to perf_call_bpf_{enter,exit}().
For the above bpftrace script, I got the following output with this patch:
for tracepoint:syscalls:sys_enter_read
===
Kernel Stack
syscall_trace_enter+407
syscall_trace_enter+407
do_syscall_64+74
entry_SYSCALL_64_after_hwframe+75
===
and for tracepoint:syscalls:sys_exit_read
===
Kernel Stack
syscall_exit_work+185
syscall_exit_work+185
syscall_exit_to_user_mode+305
do_syscall_64+118
entry_SYSCALL_64_after_hwframe+75
===
Reported-by: Salvatore Benedetto <salvabenedetto@meta.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910214037.3663272-1-yonghong.song@linux.dev
With that it uses the generic BTF based pretty printer:
This one we need to think about, not being acquainted with this syscall,
should we _traverse_ that list somehow? Would that be useful?
root@number:~# perf trace -e set_robust_list sleep 1
0.000 ( 0.004 ms): sleep/1206493 set_robust_list(head: (struct robust_list_head){.list = (struct robust_list){.next = (struct robust_list *)0x7f48a9a02a20,},.futex_offset = (long int)-32,}, len: 24) =
root@number:~#
strace prints the default integer args:
root@number:~# strace -e set_robust_list sleep 1
set_robust_list(0x7efd99559a20, 24) = 0
+++ exited with 0 +++
root@number:~#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org
Link: https://lore.kernel.org/lkml/ZuH6MquMraBvODRp@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tao Chen says:
====================
bpf: Add percpu map value size check
Check percpu map value size first and add the test case in selftest.
Change list:
- v2 -> v3:
- use bpf_map_create API and mv test case in map_percpu_stats.c
- v1 -> v2:
- round up map value size with 8 bytes in patch 1
- add selftest case in patch 2
====================
Link: https://lore.kernel.org/r/20240910144111.1464912-1-chen.dylane@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This test case checks the errno message when percpu map value size
exceeds PCPU_MIN_UNIT_SIZE.
root@debian:~# ./test_maps
...
test_map_percpu_stats_hash_of_maps:PASS
test_map_percpu_stats_map_value_size:PASS
test_sk_storage_map:PASS
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910144111.1464912-3-chen.dylane@gmail.com
Percpu map is often used, but the map value size limit often ignored,
like issue: https://github.com/iovisor/bcc/issues/2519. Actually,
percpu map value size is bound by PCPU_MIN_UNIT_SIZE, so we
can check the value size whether it exceeds PCPU_MIN_UNIT_SIZE first,
like percpu map of local_storage. Maybe the error message seems clearer
compared with "cannot allocate memory".
Signed-off-by: Jinke Han <jinkehan@didiglobal.com>
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240910144111.1464912-2-chen.dylane@gmail.com
In the event that the I2C bus was powered down when the I2C controller
driver loads, or some spurious pulses occur on the I2C bus, it's
possible that the controller detects a spurious I2C "start" condition.
In this situation it may continue to report the bus is busy indefinitely
and block the controller from working.
The "single-master" DT flag can be specified to disable bus busy checks
entirely, but this may not be safe to use in situations where other I2C
masters may potentially exist.
In the event that the controller reports "bus busy" for too long when
starting a transaction, we can try reinitializing the controller to see
if the busy condition clears. This allows recovering from this scenario.
Fixes: e1d5b6598c ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Frequently an I2C write will be followed by a read, such as a register
address write followed by a read of the register value. In this driver,
when the TX FIFO half empty interrupt was raised and it was determined
that there was enough space in the TX FIFO to send the following read
command, it would do so without waiting for the TX FIFO to actually
empty.
Unfortunately it appears that in some cases this can result in a NAK
that was raised by the target device on the write, such as due to an
unsupported register address, being ignored and the subsequent read
being done anyway. This can potentially put the I2C bus into an
invalid state and/or result in invalid read data being processed.
To avoid this, once a message has been fully written to the TX FIFO,
wait for the TX FIFO empty interrupt before moving on to the next
message, to ensure NAKs are handled properly.
Fixes: e1d5b6598c ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Cc: <stable@vger.kernel.org> # v2.6.34+
Reviewed-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Several syzbot soft lockup reports all have in common sock_hash_free()
If a map with a large number of buckets is destroyed, we need to yield
the cpu when needed.
Fixes: 75e68e5bf2 ("bpf, sockhash: Synchronize delete from bucket list on map free")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240906154449.3742932-1-edumazet@google.com
Merge ACPI backlight (video) driver update, ACPI resource management
updates, an ACPI processor aggregator device (PAD) driver fix, and
miscellaneous ACPI updates for 6.12-rc1:
- Add force_vendor quirk for Panasonic Toughbook CF-18 in the ACPI
backlight driver (Hans de Goede).
- Make the DMI checks related to backlight handling on Lenovo Yoga
Tab 3 X90F less strict (Hans de Goede).
- Enforce native backlight handling on Apple MacbookPro9,2 (Esther
Shimanovich).
- Add IRQ override quirks for Asus Vivobook Go E1404GAB and MECHREV
GM7XG0M, and refine the TongFang GMxXGxx quirk (Li Chen, Tamim Khan,
Werner Sembach).
- Fix crash in exit_round_robin() in the ACPI processor aggregator
device (PAD) driver (Seiji Nishikawa).
- Define and use symbols for device and class name lengths in the ACPI
bus type code and make the code use strscpy() instead of strcpy() in
several places (Muhammad Qasim Abdul Majeed).
* acpi-video:
ACPI: video: Add force_vendor quirk for Panasonic Toughbook CF-18
ACPI: x86: Make Lenovo Yoga Tab 3 X90F DMI match less strict
ACPI: video: Make Lenovo Yoga Tab 3 X90F DMI match less strict
ACPI: video: force native for Apple MacbookPro9,2
* acpi-resource:
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: resource: Skip IRQ override on Asus Vivobook Go E1404GAB
ACPI: resource: Do IRQ override on MECHREV GM7XG0M
* acpi-pad:
ACPI: PAD: fix crash in exit_round_robin()
* acpi-misc:
ACPI: button: Use strscpy() instead of strcpy()
ACPI: bus: Define and use symbols for device and class name lengths
ACPI: battery : Use strscpy() instead of strcpy()
ACPI: acpi_processor: Use strscpy instead() of strcpy()
ACPI: PAD: Use strscpy() instead of strcpy()
ACPI: AC: Use strscpy() instead of strcpy()
Currently there's a single ring owner of a mapped buffer, and hence the
reference count will always be 1 when it's torn down and freed. However,
in preparation for being able to link io_mapped_ubuf to different spots,
add a reference count to manage the lifetime of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, but clearing the slot pointer
earlier will be required by a later change.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge ACPI battery driver, ACPI PMIC driver, ACPI processor driver and
ACPI CPPC library updates for 6.12-rc1:
- Use the driver core for the async probing management in the ACPI
battery driver (Thomas Weißschuh).
- Remove redundant initalizations of a local variable to NULL from the
ACPI battery driver (Ilpo Järvinen).
- Use strscpy() instead of strcpy() in the ACPI battery driver (Muhammad
Qasim Abdul Majeed).
- Remove unneeded check in tps68470_pmic_opregion_probe() (Aleksandr
Mishin).
- Add support for setting the EPP register through the ACPI CPPC sysfs
interface if it is in FFH (Mario Limonciello).
- Fix MASK_VAL() usage in the ACPI CPPC library (Clément Léger).
- Reduce the log level of a per-CPU message about idle states in the
ACPI processor driver (Li RongQing).
* acpi-battery:
ACPI: battery: use driver core managed async probing
ACPI: battery: Remove redundant NULL initalizations
ACPI: battery: Use strscpy() instead of strcpy()
* acpi-pmic:
ACPI: PMIC: Remove unneeded check in tps68470_pmic_opregion_probe()
* acpi-cppc:
ACPI: CPPC: Add support for setting EPP register in FFH
ACPI: CPPC: Fix MASK_VAL() usage
* acpi-processor:
ACPI: processor: Reduce the log level of a per-CPU message about idle states
Merge an ACPI EC driver update, ACPI sysfs interface updates, an ACPI
library function update, and an ACPI APD driver update for 6.12-rc1:
- Do not release locks during operation region accesses in the ACPI EC
driver (Rafael Wysocki).
- Fix up the _STR handling in the ACPI device object sysfs interface,
make it represent the device object attributes as an attribute group
and make it rely on driver core functionality for sysfs attrubute
management (Thomas Weißschuh).
- Extend error messages printed to the kernel log when acpi_evaluate_dsm()
fails to include revision and function number (David Wang).
- Add a new AMDI0015 platform device ID to the ACPi APD driver for AMD
SoCs (Shyam Sundar S K).
* acpi-ec:
ACPI: EC: Do not release locks during operation region accesses
* acpi-sysfs:
ACPI: sysfs: remove return value of acpi_device_setup_files()
ACPI: sysfs: manage sysfs attributes through device core
ACPI: sysfs: manage attributes as attribute_group
ACPI: sysfs: evaluate _STR on each sysfs access
ACPI: sysfs: validate return type of _STR method
* acpi-utils:
ACPI: utils: Add rev/func to message when acpi_evaluate_dsm() fails
* acpi-soc:
ACPI: APD: Add AMDI0015 as platform device
Merge ACPI and irqchip updates related to external interrupt controller
support on RISC-V:
- Add ACPI device enumeration support for interrupt controller probing
including taking dependencies into account (Sunil V L).
- Implement ACPI-based interrupt controller probing on RISC-V (Sunil V L).
- Add ACPI support for AIA in riscv-intc and add ACPI support to
riscv-imsic, riscv-aplic, and sifive-plic (Sunil V L).
* acpi-riscv:
irqchip/sifive-plic: Add ACPI support
irqchip/riscv-aplic: Add ACPI support
irqchip/riscv-imsic: Add ACPI support
irqchip/riscv-imsic-state: Create separate function for DT
irqchip/riscv-intc: Add ACPI support for AIA
ACPI: RISC-V: Implement function to add implicit dependencies
ACPI: RISC-V: Initialize GSI mapping structures
ACPI: RISC-V: Implement function to reorder irqchip probe entries
ACPI: RISC-V: Implement PCI related functionality
ACPI: pci_link: Clear the dependencies after probe
ACPI: bus: Add RINTC IRQ model for RISC-V
ACPI: scan: Define weak function to populate dependencies
ACPI: scan: Add RISC-V interrupt controllers to honor list
ACPI: scan: Refactor dependency creation
ACPI: bus: Add acpi_riscv_init() function
ACPI: scan: Add a weak arch_sort_irqchip_probe() to order the IRQCHIP probe
arm64: PCI: Migrate ACPI related functions to pci-acpi.c
Merge ACPICA updates for 6.12-rc1:
- Check return value in acpi_db_convert_to_package() (Pei Xiao).
- Detect FACS and allow setting the waking vector on reduced-hardware
ACPI platforms (Jiaqing Zhao).
- Allow ACPICA to represent semaphores as integers (Adrien Destugues).
- Complete CXL 3.0 CXIMS structures support in ACPICA (Zhang Rui).
- Make ACPICA support SPCR version 4 and add RISC-V SBI Subtype to
DBG2 (Sia Jee Heng).
- Implement the Dword_PCC Resource Descriptor Macro in ACPICA (Jose
Marinho).
- Correct the typo in struct acpi_mpam_msc_node member (Punit Agrawal).
- Implement ACPI_WARNING_ONCE() and ACPI_ERROR_ONCE() and use them to
prevent a Stall() violation warning from being printed every time
this takes place (Vasily Khoruzhick).
- Allow PCC Data Type in MCTP resource (Adam Young).
- Fix memory leaks on acpi_ps_get_next_namepath()
and acpi_ps_get_next_field() failures (Armin Wolf).
- Add support for supressing leading zeros in hex strings when
converting them to integers and update integer-to-hex-string
conversions in ACPICA (Armin Wolf).
- Add support for Windows 11 22H2 _OSI string (Armin Wolf).
- Avoid warning for Dump Functions in ACPICA (Adam Lackorzynski).
- Add extended linear address mode to HMAT MSCIS in ACPICA (Dave
Jiang).
- Handle empty connection_node in iasl (Aleksandrs Vinarskis).
- Allow for more flexibility in _DSM args (Saket Dumbre).
- Setup for ACPICA release 20240827 (Saket Dumbre).
* acpica: (23 commits)
ACPICA: Setup for ACPICA release 20240827
ACPICA: Allow for more flexibility in _DSM args
ACPICA: iasl: handle empty connection_node
ACPICA: HMAT: Add extended linear address mode to MSCIS
ACPICA: Avoid warning for Dump Functions
ACPICA: Add support for Windows 11 22H2 _OSI string
ACPICA: Update integer-to-hex-string conversions
ACPICA: Add support for supressing leading zeros in hex strings
ACPICA: Allow for supressing leading zeros when using acpi_ex_convert_to_ascii()
ACPICA: Fix memory leak if acpi_ps_get_next_field() fails
ACPICA: Fix memory leak if acpi_ps_get_next_namepath() fails
ACPICA: Allow PCC Data Type in MCTP resource.
ACPICA: executer/exsystem: Don't nag user about every Stall() violating the spec
ACPICA: Implement ACPI_WARNING_ONCE and ACPI_ERROR_ONCE
ACPICA: MPAM: Correct the typo in struct acpi_mpam_msc_node member
ACPICA: Implement the Dword_PCC Resource Descriptor Macro
ACPICA: Headers: Add RISC-V SBI Subtype to DBG2
ACPICA: SPCR: Update the SPCR table to version 4
ACPICA: Complete CXL 3.0 CXIMS structures
ACPICA: haiku: Fix invalid value used for semaphores
...
Now that REG_HIDDEN_USER has no direct user anymore, remove it
entirely and update all users of sysreg_hidden_user() to call
sysreg_hidden() instead.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240904082419.1982402-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since SPSR_* are not associated with any register in the sysreg array,
nor do they have .get_user()/.set_user() helpers, they are invisible to
userspace with that encoding.
Therefore hidden_user_visibility() serves no purpose here, and can be
safely removed.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240904082419.1982402-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
