Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: e20396d65b ("arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/884c683fb6c1d1bf7d0d383a8df8f65a0a424dc7.1718890849.git.geert+renesas@glider.be
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: 7c2b8198f4 ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/834244e77e5f407ee6fab1ab5c10c98a8a933085.1718890849.git.geert+renesas@glider.be
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: 68a4552529 ("arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/21f556eb7e903d5b9f4c96188fd4b6ae0db71856.1718890849.git.geert+renesas@glider.be
Add the missing fifth interrupt to the device node that represents the
ARM architected timer. While at it, add an interrupt-names property for
clarity,
Fixes: cf40c9689e ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/15cc7a7522b1658327a2bd0c4990d0131bbcb4d7.1718890849.git.geert+renesas@glider.be
The four Cortex-A76 CPU cores on R-Car V4M share their Operating
Performance Points (OPP) table, but they have independent clocks.
All cores in the cluster can switch DVFS states independently, hence
the cluster's OPP table should not have an "opp-shared" property.
Fixes: 6bd8b0bc44 ("arm64: dts: renesas: r8a779h0: Add CA76 operating points")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/4e0227ff4388485cdb1ca2855ee6df92754e756e.1718890585.git.geert+renesas@glider.be
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series
Hardware User's Manual still has two alternate pins named both TCLK3
and TCLK4. To differentiate, the pin control driver uses "TCLK[34]" and
"TCLK[34]_X". In addition, there are alternate pins without suffix, and
with an "_A" or "_B" suffix.
Increase uniformity by adopting R-Car V4M naming:
- Rename "TCLK2_B" to "TCLK2_C",
- Rename "TCLK[12]_A" to "TCLK[12]_B",
- Rename "TCLK[12]" to "TCLK[12]_A",
- Rename "TCLK[34]_A" to "TCLK[34]_C",
- Rename "TCLK[34]_X" to "TCLK[34]_A",
- Rename "TCLK[34]" to "TCLK[34]_B".
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 0df46188a5 ("pinctrl: renesas: r8a779g0: Add missing TCLKx_A/TCLKx_B/TCLKx_X")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/2845ff1f8fe1fd8d23d2f307ad5e8eb8243da608.1717754960.git.geert+renesas@glider.be
The suffixes of the IRQ identifiers for external interrupts 0-3
are inconsistent:
- "IRQ0" and "IRQ0_A",
- "IRQ1" and "IRQ1_A",
- "IRQ2" and "IRQ2_A",
- "IRQ3" and "IRQ3_B".
The suffixes for external interrupts 4 and 5 do follow conventional
naming:
- "IRQ4A" and IRQ4_B",
- "IRQ5".
Fix this by adopting R-Car V4M naming:
- Rename "IRQ[0-2]_A" to "IRQ[0-2]_B",
- Rename "IRQ[0-3]" to "IRQ[0-3]_A".
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 1b23d8a478 ("pinctrl: renesas: r8a779g0: Add missing IRQx_A/IRQx_B")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/8ce9baf0a0f9346544a3ac801fd962c7c12fd247.1717754960.git.geert+renesas@glider.be
(H)SCIF instance 3 has two alternate pin groups: "hscif3" and
"hscif3_a", resp. "scif3" and "scif3_a", but the actual meanings of the
pins within the groups do not match.
Increase uniformity by adopting R-Car V4M naming:
- Rename "hscif3_a" to "hscif3_b",
- Rename "hscif3" to "hscif3_a",
- Rename "scif3" to "scif3_b".
While at it, remove unneeded separators.
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 050442ae4c ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
Fixes: 213b713255 ("pinctrl: renesas: r8a779g0: Add missing HSCIF3_A")
Fixes: 49e4697656 ("pinctrl: renesas: r8a779g0: Add missing SCIF3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/61fdde58e369e8070ffd3c5811c089e6219c7ecc.1717754960.git.geert+renesas@glider.be
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series
Hardware User's Manual still has two alternate pin groups (GP0_14-18
and GP1_6-10) each named both HSCIF1 and SCIF1. To differentiate, the
pin control driver uses "(h)scif1" and "(h)scif1_x", which were
considered temporary names until the conflict was sorted out.
Fix this by adopting R-Car V4M naming:
- Rename "(h)scif1" to "(h)scif1_a",
- Rename "(h)scif1_x" to "(h)scif1_b".
Adopt the R-Car V4M naming "(h)scif1_a" and "(h)scif1_b" to increase
uniformity.
While at it, remove unneeded separators.
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 050442ae4c ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
Fixes: cf4f789184 ("pinctrl: renesas: r8a779g0: Add missing HSCIF1_X")
Fixes: 9c151c2be9 ("pinctrl: renesas: r8a779g0: Add missing SCIF1_X")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/5009130d1867e12abf9b231c8838fd05e2b28bee.1717754960.git.geert+renesas@glider.be
The Pin Multiplex attachment in Rev.1.10 of the R-Car V4H Series
Hardware User's Manual still has two alternate pins named both
"FXR_TXEN[AB]". To differentiate, the pin control driver uses
"FXR_TXEN[AB]" and "FXR_TXEN[AB]_X", which were considered temporary
names until the conflict was sorted out.
Fix this by adopting R-Car V4M naming:
- Rename "FXR_TXEN[AB]" to "FXR_TXEN[AB]_A",
- Rename "FXR_TXEN[AB]_X" to "FXR_TXEN[AB]_B".
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 1c2646b5ce ("pinctrl: renesas: r8a779g0: Add missing FlexRay")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/5e1e9abb46c311d4c54450d991072d6d0e66f14c.1717754960.git.geert+renesas@glider.be
CAN-FD instance 5 has two alternate pin groups: "canfd5" and "canfd5_b".
Rename the former to "canfd5_a" to increase uniformity.
While at it, remove the unneeded separator.
Fixes: ad9bb2fec6 ("pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC support")
Fixes: 050442ae4c ("pinctrl: renesas: r8a779g0: Add pins, groups and functions")
Fixes: c2b4b2cd63 ("pinctrl: renesas: r8a779g0: Add missing CANFD5_B")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/10b22d54086ed11cdfeb0004583029ccf249bdb9.1717754960.git.geert+renesas@glider.be
We already have for_each_endpoint_of_node(), don't use
of_graph_get_next_endpoint() directly. Replace it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/878qyl970c.wl-kuninori.morimoto.gx@renesas.com
This is a sloppy logic analyzer using GPIOs. It comes with a script to
isolate a CPU for polling. While this is definitely not a production
level analyzer, it can be a helpful first view when remote debugging.
Read the documentation for details.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240620094159.6785-2-wsa+renesas@sang-engineering.com
[Bartosz: moved the Kconfig entry into a different category]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----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=0BtN
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next into main
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next:
Patch #1 to #11 to shrink memory consumption for transaction objects:
struct nft_trans_chain { /* size: 120 (-32), cachelines: 2, members: 10 */
struct nft_trans_elem { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_flowtable { /* size: 80 (-48), cachelines: 2, members: 5 */
struct nft_trans_obj { /* size: 72 (-40), cachelines: 2, members: 4 */
struct nft_trans_rule { /* size: 80 (-32), cachelines: 2, members: 6 */
struct nft_trans_set { /* size: 96 (-24), cachelines: 2, members: 8 */
struct nft_trans_table { /* size: 56 (-40), cachelines: 1, members: 2 */
struct nft_trans_elem can now be allocated from kmalloc-96 instead of
kmalloc-128 slab.
Series from Florian Westphal. For the record, I have mangled patch #1
to add nft_trans_container_*() and use if for every transaction object.
I have also added BUILD_BUG_ON to ensure struct nft_trans always comes
at the beginning of the container transaction object. And few minor
cleanups, any new bugs are of my own.
Patch #12 simplify check for SCTP GSO in IPVS, from Ismael Luceno.
Patch #13 nf_conncount key length remains in the u32 bound, from Yunjian Wang.
Patch #14 removes unnecessary check for CTA_TIMEOUT_L3PROTO when setting
default conntrack timeouts via nfnetlink_cttimeout API, from
Lin Ma.
Patch #15 updates NFT_SECMARK_CTX_MAXLEN to 4096, SELinux could use
larger secctx names than the existing 256 bytes length.
Patch #16 adds a selftest to exercise nfnetlink_queue listeners leaving
nfnetlink_queue, from Florian Westphal.
Patch #17 increases hitcount from 255 to 65535 in xt_recent, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
tcp_metrics: add netlink protocol spec in YAML
Add a netlink protocol spec for the tcp_metrics generic netlink family.
First patch adjusts the uAPI header guards to make it easier to build
tools/ with non-system headers.
v1: https://lore.kernel.org/all/20240626201133.2572487-1-kuba@kernel.org
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a protocol spec for tcp_metrics, so that it's accessible via YNL.
Useful at the very least for testing fixes.
In this episode of "10,000 ways to complicate netlink" the metric
nest has defines which are off by 1. iproute2 does:
struct rtattr *m[TCP_METRIC_MAX + 1 + 1];
parse_rtattr_nested(m, TCP_METRIC_MAX + 1, a);
for (i = 0; i < TCP_METRIC_MAX + 1; i++) {
// ...
attr = m[i + 1];
This is too weird to support in YNL, add a new set of defines
with _correct_ values to the official kernel header.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_metrics' header lacks the customary _UAPI in the header guard.
This makes YNL build rules work less seamlessly.
We can easily fix that on YNL side, but this could also be
problematic if we ever needed to create a kernel-only tcp_metrics.h.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I don't see anything checking that TCP_METRICS_ATTR_SADDR_IPV4
is at least 4 bytes long, and the policy doesn't have an entry
for this attribute at all (neither does it for IPv6 but v6 is
manually validated).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Fixes: 3e7013ddf5 ("tcp: metrics: Allow selective get/del of tcp-metrics based on src IP")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Realtek RTL8211F Ethernet PHY supports 3 LED pins which are used to
indicate link status and activity. Add minimal LED controller driver
supporting the most common uses with the 'netdev' trigger.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keith reports a use-after-free when a DPC event occurs concurrently to
hot-removal of the same portion of the hierarchy:
The dpc_handler() awaits readiness of the secondary bus below the
Downstream Port where the DPC event occurred. To do so, it polls the
config space of the first child device on the secondary bus. If that
child device is concurrently removed, accesses to its struct pci_dev
cause the kernel to oops.
That's because pci_bridge_wait_for_secondary_bus() neglects to hold a
reference on the child device. Before v6.3, the function was only
called on resume from system sleep or on runtime resume. Holding a
reference wasn't necessary back then because the pciehp IRQ thread
could never run concurrently. (On resume from system sleep, IRQs are
not enabled until after the resume_noirq phase. And runtime resume is
always awaited before a PCI device is removed.)
However starting with v6.3, pci_bridge_wait_for_secondary_bus() is also
called on a DPC event. Commit 53b54ad074 ("PCI/DPC: Await readiness
of secondary bus after reset"), which introduced that, failed to
appreciate that pci_bridge_wait_for_secondary_bus() now needs to hold a
reference on the child device because dpc_handler() and pciehp may
indeed run concurrently. The commit was backported to v5.10+ stable
kernels, so that's the oldest one affected.
Add the missing reference acquisition.
Abridged stack trace:
BUG: unable to handle page fault for address: 00000000091400c0
CPU: 15 PID: 2464 Comm: irq/53-pcie-dpc 6.9.0
RIP: pci_bus_read_config_dword+0x17/0x50
pci_dev_wait()
pci_bridge_wait_for_secondary_bus()
dpc_reset_link()
pcie_do_recovery()
dpc_handler()
Fixes: 53b54ad074 ("PCI/DPC: Await readiness of secondary bus after reset")
Closes: https://lore.kernel.org/r/20240612181625.3604512-3-kbusch@meta.com/
Link: https://lore.kernel.org/linux-pci/8e4bcd4116fd94f592f2bf2749f168099c480ddf.1718707743.git.lukas@wunner.de
Reported-by: Keith Busch <kbusch@kernel.org>
Tested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v5.10+
The system hangs on poweroff when this UFS clock is turned off, meaning
the system never powers down. For the moment mark the clock as critical.
Reviewed-by: Will McVicker <willmcvicker@google.com>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240628223506.1237523-5-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Update description of reconfiguration rules, adding requirement that a
direction flag be set to enable changing configuration for a line.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-5-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Update description of reconfiguration rules, adding requirement that a
direction flag be set or the configuration is considered invalid.
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-4-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For MTL+ platforms we use PICA chips for Type-C support and
hence mg programming is not needed.
Fixes issue with drm warn of TC port not being in legacy mode.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240625111840.597574-1-mika.kahola@intel.com
(cherry picked from commit aaf9dc86bd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Explicitly set the 'family' driver_info struct member for leafimx.
Previously, the correct operation relied on KVASER_LEAF being the first
defined value in enum kvaser_usb_leaf_family.
Fixes: e6c80e6010 ("can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression")
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/all/20240628194529.312968-1-extja@kvaser.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
'struct shutdown_handler' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
7043 788 8 7839 1e9f drivers/xen/manage.o
After:
=====
text data bss dec hex filename
7164 676 8 7848 1ea8 drivers/xen/manage.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/ca1e75f66aed43191cf608de6593c7d6db9148f1.1719134768.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Juergen Gross <jgross@suse.com>
Implement FITRIM for the realtime device by pretending that it's
"space" immediately after the data device. We have to hold the
rtbitmap ILOCK while the discard operations are ongoing because there's
no busy extent tracking for the rt volume to prevent reallocations.
Cc: Konst Mayer <cdlscpmv@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Following warning is reported, so remove these duplicated header
including:
./fs/xfs/libxfs/xfs_trans_resv.c: xfs_da_format.h is included more than once.
./fs/xfs/scrub/quota_repair.c: xfs_format.h is included more than once.
./fs/xfs/xfs_handle.c: xfs_da_btree.h is included more than once.
./fs/xfs/xfs_qm_bhv.c: xfs_mount.h is included more than once.
./fs/xfs/xfs_trace.c: xfs_bmap.h is included more than once.
This is just a clean code, no logic changed.
Signed-off-by: Wenchao Hao <haowenchao22@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Now that the page fault handler has been refactored, the only caller
of xfs_ilock_for_write_fault is simple enough and calls it
unconditionally. Fold the logic and expand the comments explaining it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
After the previous refactoring, xfs_dax_fault is now never used for write
faults, so don't bother with the xfs_ilock_for_write_fault logic to
protect against writes when remapping is in progress.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Split the write fault and DAX fault handling into separate helpers
so that the main fault handler is easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Replace the separate stub with an IS_ENABLED check, and take the call to
dax_finish_sync_fault into xfs_dax_fault instead of leaving it in the
caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Move the relock path out of the straight line and add a comment
explaining why it exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
About half of xfs_ilock_for_iomap deals with a special case for direct
I/O writes to COW files that need to take the ilock exclusively. Move
this code into the one callers that cares and simplify
xfs_ilock_for_iomap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry
to make sure don't stray beyond valid memory region. Before patching, the
loop simply checks that the start offset of the dup and dep is within the
range. So in a crafted image, if last entry is xfs_dir2_data_unused, we
can change dup->length to dup->length-1 and leave 1 byte of space. In the
next traversal, this space will be considered as dup or dep. We may
encounter an out of bound read when accessing the fixed members.
In the patch, we make sure that the remaining bytes large enough to hold
an unused entry before accessing xfs_dir2_data_unused and
xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make
sure that the remaining bytes large enough to hold a dirent with a
single-byte name before accessing xfs_dir2_data_entry.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
There is a lack of verification of the space occupied by fixed members
of xlog_op_header in the xlog_recover_process_data.
We can create a crafted image to trigger an out of bounds read by
following these steps:
1) Mount an image of xfs, and do some file operations to leave records
2) Before umounting, copy the image for subsequent steps to simulate
abnormal exit. Because umount will ensure that tail_blk and
head_blk are the same, which will result in the inability to enter
xlog_recover_process_data
3) Write a tool to parse and modify the copied image in step 2
4) Make the end of the xlog_op_header entries only 1 byte away from
xlog_rec_header->h_size
5) xlog_rec_header->h_num_logops++
6) Modify xlog_rec_header->h_crc
Fix:
Add a check to make sure there is sufficient space to access fixed members
of xlog_op_header.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The RT extent range must be considered in the xfs_flush_unmap_range() call
to stabilize the boundary.
This code change is originally from Dave Chinner.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Currently xfs_flush_unmap_range() does unmap for a full RT extent range,
which we also want to ensure is clean and idle.
This code change is originally from Dave Chinner.
Reviewed-by: Christoph Hellwig <hch@lst.de>4
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
