There appears to be a possible use after free with vdec_close().
The firmware will add buffer release work to the work queue through
HFI callbacks as a normal part of decoding. Randomly closing the
decoder device from userspace during normal decoding can incur
a read after free for inst.
Fix it by cancelling the work in vdec_close.
Cc: stable@vger.kernel.org
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
msm8998 has the same video encode/decode accelerator as msm8996.
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Core dump is generated whenever there is system error reported
by firmware. Right now, multiple such dumps are generated if
recovery fails in first attempt, since the sys error handler is
invoked again for every failed recovery.
To avoid it, add conditional check to generate core dump only
once during every system error notification from firmware.
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: document new dump_core field]
For scenarios, when source change is followed by VIDIOC_STREAMOFF
on output plane, driver should discard any queued OUTPUT
buffers, which are not decoded or dequeued.
Flush with HFI_FLUSH_INPUT does not have any actual impact.
So, fix it, by invoking HFI_FLUSH_ALL, which will flush all
queued buffers.
Fixes: 85872f861d ("media: venus: Mark last capture buffer")
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Nathan Hebert <nhebert@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Sometimes, the on-disk metadata might be invalid due to user
interrupts, storage failures, or other unknown causes.
In that case, z_erofs_map_blocks_iter() may still return a valid
m_llen while other fields remain invalid (e.g., m_plen can be 0).
Due to the return value of z_erofs_scan_folio() in some path will
be ignored on purpose, the following z_erofs_scan_folio() could
then use the invalid value by accident.
Let's reset m_llen to 0 to prevent this.
Link: https://lore.kernel.org/r/20240629185743.2819229-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
To simplify, introduce the new gmu_chipid for a740 & a750 GPUs.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/601396/
Signed-off-by: Rob Clark <robdclark@chromium.org>
fragmentation_lru derives from dirty_sectors, and wasn't being checked.
Co-developed-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to make sure we're not missing any fragmenation entries in the
LRU BTREE after repairing ALLOC BTREE
Also, use the new bch2_btree_write_buffer_maybe_flush() helper; this was
only working without it before since bucket invalidation (usually)
wasn't happening while fsck was running.
Co-developed-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a new helper for checking references to write buffer btrees, where
we need a flush before we definitively know we have an inconsistency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Bugfixes:
- SUNRPC one more fix for the NFSv4.x backchannel timeouts
-----BEGIN PGP SIGNATURE-----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=c5Ek
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fix from Trond Myklebust:
- One more SUNRPC fix for the NFSv4.x backchannel timeouts
* tag 'nfs-for-6.10-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: Fix backchannel reply, again
Add support in drm/msm driver for the Adreno X185 gpu found in
Snapdragon X1 Elite chipset.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/601399/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Document Adreno X185 GMU in the dt-binding specification.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/601395/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Disable the call to qcom_scm_gpu_init_regs() for a730 and a740
after init failures on the HDK8550 and HDK8450 platforms:
msm_dpu ae01000.display-controller: failed to load adreno gpu
msm_dpu ae01000.display-controller: failed to bind 3d00000.gpu (ops a3xx_ops [msm]): -5
msm_dpu ae01000.display-controller: adev bind failed: -5
While debugging, it happens the call to:
qcom_scm_gpu_init_regs(QCOM_SCM_GPU_ALWAYS_EN_REQ)
returns -5 and makes the gpu fail to initialize.
Remove the scm call since it's not done downstream either and
works fine without.
Fixes: 14b27d5df3 ("drm/msm/a7xx: Initialize a750 "software fuse"")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/600972/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The gpulist has twice the a6xx gpulist, replace the second one
with the a7xx gpulist.
Solves:
msm_dpu ae01000.display-controller: Unknown GPU revision: 7.3.0.1
msm_dpu ae01000.display-controller: Unknown GPU revision: 67.5.10.1
msm_dpu ae01000.display-controller: Unknown GPU revision: 67.5.20.1
on SM8450, SM8550 & SM8560.
Fixes: 8ed322f632 ("drm/msm/adreno: Split up giant device table")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600939/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Commit f6ebff4fe810 ("drm/msm/adreno: De-spaghettify the use of memory
barriers") made some fixups relating to write arrival, ensuring that
the GPU's memory interface has *really really really* been told to come
out of reset. That in turn rendered the hacky commit being reverted no
longer necessary.
Get rid of it.
This reverts commit b77532803d ("drm/msm/a6xx: Poll for GBIF unhalt
status in hw_init")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600870/
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Memory barriers help ensure instruction ordering, NOT time and order
of actual write arrival at other observers (e.g. memory-mapped IP).
On architectures employing weak memory ordering, the latter can be a
giant pain point, and it has been as part of this driver.
Moreover, the gpu_/gmu_ accessors already use non-relaxed versions of
readl/writel, which include r/w (respectively) barriers.
Replace the barriers with a readback (or drop altogether where possible)
that ensures the previous writes have exited the write buffer (as the CPU
must flush the write to the register it's trying to read back).
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/600869/
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Sequence for controlling the LTSSM state machine is going to change
for SoCs like r8a779f0. Move the LTSSM code to a new callback
ltssm_control() and populate it for each SoCs.
This also warrants the addition of new compatibles for r8a779g0 and
r8a779h0. But since they are already part of the DT binding, it won't
make any difference.
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-4-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In order to support future SoCs such as r8a779g0 (R-Car V4H) and
r8a779h0 (R-Car V4M) that require different initialization settings,
introduce SoC specific driver data with the initial member being the
device mode.
No functional change.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-3-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
R-Car Gen4 PCIe controller needs to use the Synopsys-specific PCIe
configuration registers. So, add the macros.
Link: https://lore.kernel.org/linux-pci/20240611125057.1232873-2-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Hard matching against the WhoAmI values isn't ideal for using devices
which are compatible with existing ones. Instead of raising an error,
issue a warning instead, thus allowing the driver to continue probing.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20240625082800.62305-1-kauschluss@disroot.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The return value of 'iio_gts_find_int_time_by_sel()' is assigned to
variable 'intg_old' but value of 'ret' is checked for error. Update to
use 'intg_old' for error checking.
Fixes: 620d1e6c7a ("iio: light: Add support for APDS9306 Light Sensor")
Signed-off-by: Mudit Sharma <muditsharma.info@gmail.com>
Reviewed-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://patch.msgid.link/20240625210203.522179-1-muditsharma.info@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* Always free only post-EOF delayed allocations for files with the
XFS_DIFLAG_PREALLOC or APPEND flags set.
* Do not align cow fork delalloc to cowextsz hint when running low on space.
* Allow zero-size symlinks and directories as long as the link count is
zero.
* Change XFS_IOC_EXCHANGE_RANGE to be a _IOW only ioctl. This was ioctl was
introduced during v6.10 developement cycle.
* xfs_init_new_inode() now creates an attribute fork on a newly created
inode even if ATTR feature flag is not enabled.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZnvYdwAKCRAH7y4RirJu
9DRmAP9VwmSgBrVGZ459K6LluP12FoIpzUljEYSiQiyjhxuQJgD/fou/8G+/TTQH
3TtdmC8Xo7SWRMq9+wPpH5OywbsvZQM=
=fV8d
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Always free only post-EOF delayed allocations for files with the
XFS_DIFLAG_PREALLOC or APPEND flags set.
- Do not align cow fork delalloc to cowextsz hint when running low on
space.
- Allow zero-size symlinks and directories as long as the link count is
zero.
- Change XFS_IOC_EXCHANGE_RANGE to be a _IOW only ioctl. This was ioctl
was introduced during v6.10 developement cycle.
- xfs_init_new_inode() now creates an attribute fork on a newly created
inode even if ATTR feature flag is not enabled.
* tag 'xfs-6.10-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: honor init_xattrs in xfs_init_new_inode for !ATTR fs
xfs: fix direction in XFS_IOC_EXCHANGE_RANGE
xfs: allow unlinked symlinks and dirs with zero size
xfs: restrict when we try to align cow fork delalloc to cowextsz hints
xfs: fix freeing speculative preallocations for preallocated files
of the previous wmt-driver
-----BEGIN PGP SIGNATURE-----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=pKpi
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two fixes for the testunit and and a fixup for the code reorganization
of the previous wmt-driver"
* tag 'i2c-for-6.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: discard write requests while old command is running
i2c: testunit: don't erase registers after STOP
i2c: viai2c: turn common code into a proper module
Highlights:
- Fix lg-laptop driver not working with 2024 LG laptop models
- Add missing MODULE_DESCRIPTION() macros to various modules
- nvsw-sn2201: Add check for platform_device_add_resources
The following is an automated git shortlog grouped by driver:
add missing MODULE_DESCRIPTION() macros:
- add missing MODULE_DESCRIPTION() macros
lg-laptop:
- Use ACPI device handle when evaluating WMAB/WMBB
- Change ACPI device id
- Remove LGEX0815 hotkey handling
platform/mellanox:
- nvsw-sn2201: Add check for platform_device_add_resources
platform/x86/intel:
- add missing MODULE_DESCRIPTION() macros
platform/x86/siemens:
- add missing MODULE_DESCRIPTION() macros
wireless-hotkey:
- Add support for LG Airplane Button
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZ/6kUUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9z+ywf/dQ9UqyJqejtRHrXjYYZqQyT/xXv9
8aCMXA/U7RPxnIP8Fwkb3hQXW4TMUMYrsz3sHxhCWiyb8fXBgEbrVxDVbIjehnf3
HZRVw/JeFqHe/bIp3QmOH05FSMdBWY34hhsm4dPEYyUiUUPN78ec7bekZ7ERMoFi
u3+jKUxIKlcqGqO6E0NtpLmz6Ltu07C5SHgvgpafs8FLuWTvr6dnbKMWB5k/1oCo
qn8aXopWsBclaPTPI/ehtHvPnWX9bhuTz0oQjZGrGJQmaVoo81guFLe+Ag2nKPNU
mhQQUvUKdDg6ojuSX7Hmtb7pBIP0noxHxuAXll0gePQXjpyJ0Pe07HlNMw==
=iWe/
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix lg-laptop driver not working with 2024 LG laptop models
- Add missing MODULE_DESCRIPTION() macros to various modules
- nvsw-sn2201: Add check for platform_device_add_resources
* tag 'platform-drivers-x86-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: add missing MODULE_DESCRIPTION() macros
platform/x86/intel: add missing MODULE_DESCRIPTION() macros
platform/x86/siemens: add missing MODULE_DESCRIPTION() macros
platform/x86: lg-laptop: Use ACPI device handle when evaluating WMAB/WMBB
platform/x86: lg-laptop: Change ACPI device id
platform/x86: lg-laptop: Remove LGEX0815 hotkey handling
platform/x86: wireless-hotkey: Add support for LG Airplane Button
platform/mellanox: nvsw-sn2201: Add check for platform_device_add_resources
- moxart-mmc: Revert "mmc: moxart-mmc: Use sg_miter for PIO"
- sdhci: Do not invert write-protect twice
- sdhci: Do not lock spinlock around mmc_gpio_get_ro()
- sdhci-pci/sdhci-pci-o2micro: Return proper error codes
- sdhci-brcmstb: Fix support for erase/trim/discard
-----BEGIN PGP SIGNATURE-----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=gj1M
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- moxart-mmc: Revert "mmc: moxart-mmc: Use sg_miter for PIO"
- sdhci: Do not invert write-protect twice
- sdhci: Do not lock spinlock around mmc_gpio_get_ro()
- sdhci-pci/sdhci-pci-o2micro: Return proper error codes
- sdhci-brcmstb: Fix support for erase/trim/discard
* tag 'mmc-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Do not lock spinlock around mmc_gpio_get_ro()
mmc: sdhci: Do not invert write-protect twice
Revert "mmc: moxart-mmc: Use sg_miter for PIO"
mmc: sdhci-brcmstb: check R1_STATUS for erase/trim/discard
mmc: sdhci-pci-o2micro: Convert PCIBIOS_* return codes to errnos
mmc: sdhci-pci: Convert PCIBIOS_* return codes to errnos
AD7606-8 is referred to as AD7606 by Analog Devices. This comment aims
to avoid confusion. Also the compatible names were not sorted by
alphabetical order.
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240628-cleanup-ad7606-v2-2-96e02f90256d@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
With ARCH=arm64
make allmodconfig && make W=1 C=1
reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/edac/layerscape_edac_mod.o
Add the missing invocation of the MODULE_DESCRIPTION() macro to all
files which have a MODULE_LICENSE().
This includes mpc85xx_edac.c and four octeon_edac-*.c files which,
although they did not produce a warning with the arm64 allmodconfig
configuration, may cause this warning with other configurations.
[ bp: s/module/driver/ for layerscape_edac ]
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240617-md-arm64-drivers-edac-v2-1-6d6c5dd1e5da@quicinc.com
The outer if () should have been dropped when switching to c->x86_vfm.
Fixes: 6568fc18c2 ("x86/cpu/intel: Switch to new Intel CPU model defines")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240529183605.17520-1-andrew.cooper3@citrix.com
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/common/videobuf2/videobuf2-dvb.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: helpers library -> helper library]
Fixes changing the Line Out audio source with the video input
on MyGica UTV3 board. Previously, GPIOs were only set in
em28xx_set_audio_source(), which only boards with USB audio
support reach.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card
that has analog TV, composite video, and FM radio inputs, an IR
remote, and provides audio only as Line Out, but not over USB.
Mine is prepared for an FM tuner, but not equipped with one.
Support for FM radio is therefore missing. The device contains:
- Empia EM2860 USB bridge
- Philips SAA7113 video decoder
- NXP TDA9801T demodulator
- Tena TNF931D-DFDR1 tuner
- ST HCF4052 demux, switches input audio to Line Out
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a binding for the rc-mygica-utv3 keymap
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add keymap for the simple IR (RC-5) remote that comes with the
MyGica UTV3 Analog USB2.0 TV Box video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tuner ranges were determined by USB capturing the vendor driver of a
MyGica UTV3 video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add check for the return value of v4l2_fwnode_endpoint_parse() and
return the error if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-mc-common.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/common/uvc.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/i2c/uda1342.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/dvb-frontends/au8522_decoder.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/dvb-frontends/mb86a16.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/staging/media/atomisp/i2c/atomisp-mt9m114.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/ti/vpe/ti-vpdma.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos-fimc-lite.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos-fimc-is.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos4-is-common.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Decouple the direct calls to VFE's vfe_get/put in the CSID subdev
in order to prepare for the introduction of IFE subdev.
Also decouple CSID base address from VFE since on the Titan platform
CSID register base address resides within VFE's base address.
Signed-off-by: Milen Mitkov <quic_mmitkov@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp/sm8250/sdm845/apq8016
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Move out the format related helper functions from vfe and video in a
separate file. The goal here is to create a format API.
Signed-off-by: Radoslav Tsvetkov <quic_rtsvetko@quicinc.com>
Signed-off-by: Gjorgji Rosikopulos <quic_grosikop@quicinc.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
