For iMX8QXP and iMX8QM, add bypass clocks and register some of the LVDS
clocks with imx_clk_scu2 as the parent needs to explicitly set.
In order to make sure MIPI DSI works well after suspend/resume, the LVDS
pixel and phy clocks must be initialized before the MIPI tx_esacpe
and rx_escape clocks. LVDS phy, LVDS pixel, tx_escape, and rx_esacpe are all
on the same MSLICE. They all share the same clock parent. So, setting the
parent source or rate affects all of these clocks. In the LVDS use case the
MIPI tx_escape and rx_escape are not saved and restored. So, LVDS works for
either clock initialization order. For MIPI case, LVDS must be initialized first.
Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Oliver F. Brown <oliver.brown@oss.nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-12-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The 'nand_usdhc_bus' clock is only need to be enabled when usdhc
or nand module is active, so change it to non-critical clock type.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-11-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add IMX8MN_CLK_SAI7_IPG clock entry.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-10-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add flag 'CLK_SET_RATE_PARENT' to 'IMX7D_LCDIF_PIXEL_ROOT_SRC' to
propagate rate changes from LCDIF pixel clock to video PLL to
provide more accurate clock rate for LCDIF pixel clock.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-9-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
For i.MX7D DRAM related mux clock, the clock source change should ONLY
be done done in low level asm code without accessing DRAM, and then
calling clk API to sync the HW clock status with clk tree, it should never
touch real clock source switch via clk API, so CLK_SET_PARENT_GATE flag
should NOT be added, otherwise, DRAM's clock parent will be disabled when
DRAM is active, and system will hang.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-8-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and then does clk_set_parent on the DDR muxes to synchronize
the clock tree.
since commit 936c383673 ("clk: imx: fix composite peripheral flags"),
these TF-A managed muxes have SET_PARENT_GATE set, which results
in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY:
clk_set_parent(dram_apb_src, sys1_pll_40m);(busfreq-imx8mq.c)
commit 926bf91248
("clk: imx8m: fix clock tree update of TF-A managed clocks") adds this
method and enables 8mm, 8mn and 8mq. i.MX8MP also needs it.
This is safe to do, because updating the Linux clock tree to reflect
reality will always be glitch-free.
Another reason to this patch is that powersave image BT music
requires dram to be 400MTS, so clk_set_parent(dram_alt_src,
sys1_pll_800m); is required. Without this patch, it will not succeed.
Fixes: 936c383673 ("clk: imx: fix composite peripheral flags")
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-7-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Fractional part of PLL gets lost after re-enabling the PLL. the
MFN can NOT be automatically loaded when doing frac PLL enable/disable,
So when re-enable PLL, configure mfn explicitly.
Fixes: 1b26cb8a77 ("clk: imx: support fracn gppll")
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
When some module is disabled by fuse, its PCC PR bit is default 0 and
PCC is not operational. Any write to this PCC will cause SError.
Fixes: b40ba80653 ("clk: imx: Update the compsite driver to support imx8ulp")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Previously we assumed that the root clock slice is enabled
by default when kernel boot up. But the bootloader may disable
the clocks before jump into kernel. The gate ops should be registered
rather than NULL to make sure the disabled clock can be enabled
when kernel boot up. Refine the code to skip disable the clock
if mcore booted.
Fixes: a740d7350f ("clk: imx: imx93: add mcore_booted module paratemter")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Bootloader might disable some CCM ROOT Slices. So if mcore_booted set with
display CCM ROOT disabled by Bootloader, kernel display BLK CTRL driver
imx8m_blk_ctrl_driver_init may hang the system because the BUS clk is
disabled.
Add back gate ops, but with disable doing nothing, then the CCM ROOT
will be enabled when used.
Fixes: bb7e897b00 ("clk: imx8m: check mcore_booted before register clk")
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The clk_set_parent for "enet1_ref_sel" and "enet2_ref_sel" are
incorrect, therefore the original requirements to have "enet_clk_ref" as
output sourced by iMX ENET PLL as a default config is not met.
Only "enet[1,2]_ref_125m" "enet[1,2]_ref_pad" are possible parents for
"enet1_ref_sel" and "enet2_ref_sel".
This was observed as a regression using a custom device tree which was
expecting this default config.
This can be fixed at the device tree level but having a default config
matching the original behavior (before refclock mux) will avoid breaking
existing configs.
Fixes: 4e197ee880 ("clk: imx6ul: add ethernet refclock mux support")
Link: https://lore.kernel.org/lkml/20230306020226.GC143566@dragon/T/
Signed-off-by: Sebastien Laveze <slaveze@smartandconnective.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240528151434.227602-1-slaveze@smartandconnective.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
According to Reference Manual of i.MX8MP
The parent clock of "earc_phy" is "sai_pll_out_div2",
The parent clock of "audpll" is "osc_24m".
Add CLK_GATE_PARENT() macro for usage of specifying parent clock.
Fixes: 6cd95f7b15 ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1718350923-21392-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Add CLK_SET_RATE_PARENT flags that when the device driver sets the
child clock rate, parent clock frequency can be refined accordingly.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1718350923-21392-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Enable the PM8008 PMIC which is used to power the camera sensors.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240608155526.12996-13-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QCS8550 is derived from SM8550. The difference between SM8550 and
QCS8550 is QCS8550 doesn't have modem RF system. QCS8550 is mainly used
in IoT products.
QCS8550 firmware has different memory map compared to SM8550.
The memory map will be runtime added through bootloader.
There are 3 types of reserved memory regions here:
1. Firmware related regions which aren't shared with kernel.
The device tree source in kernel doesn't need to have node to indicate
the firmware related reserved information. Bootloader converys the
information by updating devicetree at runtime.
This will be described as: UEFI saves the physical address of the
UEFI System Table to dts file's chosen node. Kernel read this table and
add reserved memory regions to efi config table. Current reserved memory
region may have reserved region which was not yet used, release note of
the firmware have such kind of information.
2. Firmware related memory regions which are shared with Kernel
The device tree source in the kernel needs to include nodes that
indicate fimware-related shared information. A label name is suggested
because this type of shared information needs to be referenced by
specific drivers for handling purposes.
Unlike previous platforms, QCS8550 boots using EFI and describes
most reserved regions in the ESRT memory map. As a result, reserved
memory regions which aren't relevant to the kernel(like the hypervisor
region) don't need to be described in DT.
3. Remoteproc regions.
Remoteproc regions will be reserved and then assigned to subsystem
firmware later.
Here is a reserved memory map for this platform:
0x80000000 +-------------------+
| |
| Firmware Related |
| |
0x8a800000 +-------------------+
| |
| Remoteproc Region |
| |
0xa7000000 +-------------------+
| |
| Kernel Available |
| |
0xd4d00000 +-------------------+
| |
| Firmware Related |
| |
0x100000000 +-------------------+
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240618072202.2516025-3-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document QCS8550 SoC and the AIM300 AIoT board bindings.
QCS8550 is derived from SM8550. The difference between SM8550 and
QCS8550 is QCS8550 doesn't have modem RF system. QCS8550 is mainly used
in IoT scenarios.
AIM300 Series is a highly optimized family of modules designed to
support AIoT applications. It integrates QCS8550 SoC, UFS and PMIC chip
etc.
AIM stands for Artificial Intelligence Module. AIoT stands for AI IoT.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240618072202.2516025-2-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock controller driver of QCA8K depends on MDIO_BUS because
of mdio_module_driver used to register the driver.
This patch fixes the following undefined symbols.
ERROR: modpost: "mdio_driver_register"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "mdio_driver_unregister"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "__mdiobus_write"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
ERROR: modpost: "__mdiobus_read"
[drivers/clk/qcom/nsscc-qca8k.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202406161634.B27sOs8B-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202406162047.QkUMa2fG-lkp@intel.com/
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20240617093806.3461165-1-quic_luoj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the PMU module of the QCA6391 present on the RB5 board.
Assign its LDO power outputs to the existing Bluetooth module. Add a
node for the PCIe port to sm8250.dtsi and define the WLAN node on it in
the board's .dts and also make it consume the power outputs of the PMU.
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240605122729.24283-5-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the ath12k WLAN on-board the WCN7850 module present on the
board.
[Neil: authored the initial version of the change]
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240605122729.24283-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe the ath12k WLAN on-board the WCN7850 module present on the
board.
[Neil: authored the initial version of the change]
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240605122729.24283-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 8cab033628 ("clk: qcom: Add QCM2290 GPU clock controller driver")
adds the config CLK_QCM2290_GPUCC, which intends to select the support for
the QCM2290 Global Clock Controller. It however selects the non-existing
config CLK_QCM2290_GCC, whereas the config for the QCM2290 Global Clock
Controller is named QCM_GCC_2290.
Adjust the config to the intended one.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Fixes: 8cab033628 ("clk: qcom: Add QCM2290 GPU clock controller driver")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240620201431.93254-1-lukas.bulwahn@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the secure QFPROM driver used by Qualcomm QDU1000
platform to read the secure qfprom region allowing LLCC driver
to get the DDR channel configuration.
Currently, LLCC is the only user of secure QFPROM, and hence
setting CONFIG_NVMEM_QCOM_SEC_QFPROM as module to the convenience
of LLCC module.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240620112716.1339-1-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This symbol is selected by a couple drivers, but isn't used by anyone
and hasn't been for years now. Drop it.
No functional change intended.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Mike Tipton <quic_mdtipton@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240619-drop-qcom-rpmcc-v1-1-b487c95162ef@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable sound and modem for the GPLUS FL8005A.
The setup is similar to most MSM8916 devices, i.e.:
- QDSP6 audio
- Earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX
Signed-off-by: Lin, Meng-Bo <linmengbo06890@proton.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619111523.54301-1-linmengbo06890@proton.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The LLCC binding and driver was corrected to handle the stride
varying between platforms. Switch to the new format to ensure
accesses are done in the right place.
Fixes: b0e0290bc4 ("arm64: dts: qcom: qdu1000: correct LLCC reg entries")
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240619061641.5261-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Without explicitly specifying names for the regulators they are named
based on the DeviceTree node name. This results in multiple regulators
with the same name, making debug prints and regulator_summary impossible
to reason about.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb@postmarketos.org>
Link: https://lore.kernel.org/r/20240618-qcm6490-regulator-name-v1-2-69fa05e9f58e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Without explicitly specifying names for the regulators they are named
based on the DeviceTree node name. This results in multiple regulators
with the same name, making debug prints and regulator_summary impossible
to reason about.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240618-qcm6490-regulator-name-v1-1-69fa05e9f58e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently the keyboard backlight is described in the common
sc7180-trogdor dtsi as an led node below a pwmleds node, and the led
node is set to disabled. Only the boards that have a keyboard backlight
enable it.
However, since the parent pwmleds node is still enabled everywhere, even
on boards that don't have keyboard backlight it is probed and fails,
resulting in an error:
leds_pwm pwmleds: probe with driver leds_pwm failed with error -22
as well as a failure in the DT kselftest:
not ok 45 /pwmleds
Fix this by controlling the status of the parent pwmleds node instead of
the child led, based on the presence of keyboard backlight. This is what
is done on sc7280 already.
While at it add a missing blank line before the child node to follow the
coding style.
Fixes: 7ec3e67307 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240614-sc7180-pwmleds-probe-v1-1-e2c3f1b42a43@collabora.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to specify exact name for the second (AUX) output
clock. It has never been used for the lookups based on the system
clock name. The driver generates it on its own, in order to remain
compatible with the older DT. Drop the clock name.
Fixes: d00b42f170 ("arm64: dts: qcom: sm8650: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240614-fix-pcie-phy-compat-v3-5-730d1811acf4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to specify exact name for the second (AUX) output
clock. It has never been used for the lookups based on the system
clock name. The driver generates it on its own, in order to remain
compatible with the older DT. Drop the clock name.
Fixes: 0cc97d9e3f ("arm64: dts: qcom: sm8550: remove pcie-1-phy-aux-clk and add pcie1_phy pcie1_phy_aux_clk")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240614-fix-pcie-phy-compat-v3-4-730d1811acf4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no need to specify exact name for the second (AUX) output
clock. It has never been used for the lookups based on the system
clock name. The driver generates it on its own, in order to remain
compatible with the older DT. Drop the clock name.
Fixes: e768628406 ("arm64: dts: qcom: sm8450: correct pcie1 phy clocks inputs to gcc")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240614-fix-pcie-phy-compat-v3-3-730d1811acf4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Embedded Controller in the Lenovo Yoga C630 is accessible on &i2c1
and provides battery and adapter status, as well as altmode
notifications for the second USB Type-C port.
Add a definition for the EC.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240614-yoga-ec-driver-v7-6-9f0b9b40ae76@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Describe links between the first USB3 host and the DisplayPort that is
routed to the same pins.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240614-yoga-ec-driver-v7-5-9f0b9b40ae76@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The first SDHC can do DMA like most other peripherals, add the missing
iommus entry which is required to set this up.
This may have been working on Linux before since the bootloader
configures it and it may not be full torn down. But other software like
U-Boot needs this to initialize the eMMC properly.
Fixes: 97e563bf5b ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240619-rb2-fixes-v1-1-1d2b1d711969@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Recent (SM8550+ ish) Qualcomm SoCs have a new mechanism for precisely
identifying the specific SKU and the precise speed bin (in the general
meaning of this word, anyway): a pair of values called Product Code
and Feature Code.
Based on this information, we can deduce the available frequencies for
things such as Adreno. In the case of Adreno specifically, Pcode is
useless for non-prototype SoCs.
Introduce a getter for the feature code and export it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-smem_speedbin-v2-2-8989d7e3d176@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In preparation for parsing the chip "feature code" (FC) and "product
code" (PC) (essentially the parameters that let us conclusively
characterize the sillicon we're running on, including various speed
bins), move the socinfo version defines to the public header.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240605-topic-smem_speedbin-v2-1-8989d7e3d176@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This will used by drm/msm to initialize GPU registers that Qualcomm's
firmware doesn't make writeable to the kernel.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240430-a750-raytracing-v3-2-7f57c5ac082d@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Audiomix block control can be a reset controller for
Enhanced Audio Return Channel (EARC), which is one of
modules in this audiomix subsystem.
The reset controller is supported by the auxiliary device
framework.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/1718350923-21392-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The Audio Block Control contains clock distribution and gating
controls, as well as reset handling to several of the AUDIOMIX
peripherals. Especially the reset controls for Enhanced Audio
Return Channel (EARC) PHY and Controller.
So make Audio Block Control a reset provider for EARC, which
is one of modules in this audio subsystem.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1718350923-21392-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Geliang Tang says:
====================
use network helpers, part 7
From: Geliang Tang <tanggeliang@kylinos.cn>
v6:
- update ASSERT strings in patch 4 as Eduard suggested. (thanks)
v5:
- update patch 1, add getsockopt(SO_PROTOCOL) in connect_to_fd() to
fix errors reported by CI.
v4:
- fix errors reported by CI.
v3:
- rename start_client to client_socket
- Use connect_to_addr in connect_to_fd_opt
v2:
- update patch 2, extract a new helper start_client.
- drop patch 3, keep must_fail in network_helper_opts.
Drop type and noconnect from network_helper_opts. And use start_server_str
in mptcp and test_tcp_check_syncookie_user.
Patches 1-4 address Martin's comments in the previous series.
====================
Link: https://lore.kernel.org/r/cover.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since start_server_str() is added now, it can be used in mptcp.c in
start_mptcp_server() instead of using helpers make_sockaddr() and
start_server_addr() to simplify the code.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/16fb3e2cd60b64b5470b0e69f1aa233feaf2717c.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In test_bpf_ip_check_defrag_ok(), the new helper client_socket() can be
used to replace connect_to_fd_opts() with "noconnect" opts, and the strcut
member "noconnect" of network_helper_opts can be dropped now, always
connect to server in connect_to_fd_opts().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/f45760becce51986e4e08283c7df0f933eb0da14.1718932493.git.tanggeliang@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
