Somehow those enablement bits were left over when we were
adding initial Loongson-2K support.
Set up basic information and select proper builtin DTB for
Loongson-2K.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some firmware implementations require restoring ra and sp to be
passed as arguments.
Passing them as necessary.
Fixes: 68557c59a5 ("MIPS: Loongson64: Implement PM suspend for LEFI firmware")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
We should always use firmware's poweroff & reboot service
if it's available as firmware may need to perform more task
than platform's syscon etc.
However _machine_restart & poweroff hooks are registered at
low priority, which means platform reboot driver can override
them.
Register firmware based reboot/poweroff implementation with
register_sys_off_handler with appropriate priority so that
they will be prioritised. Remove _machine_halt hook as it's
deemed to be unnecessary.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
cpu_hwmon is unsupported on CPUs without loongson_chiptemp
register and csr.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some global register address variable may be missing on
specific CPU type, test them before use them.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
ISA node is required by Loongson64 platforms to initialize
PIO support.
Kernel will hang at boot without ISA node.
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
phy-mode should be rgmii-id to match hardware configuration.
Also there should be a phy-handle to reference phy node.
Fixes: f8a1142507 ("MIPS: Loongson64: Add GMAC support for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The correct interrupt line for RTC is line 8 on liointc1.
Fixes: e47084e116 ("MIPS: Loongson64: DTS: Add RTC support to Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All internal liointc interrupts are high level triggered.
Fixes: b1a792601f ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Builtin DTBS should never contain memory node as memory is
going to be managed by LEFI interface.
Remove memory node to prevent confliction.
Fixes: b1a792601f ("MIPS: Loongson64: DeviceTree for Loongson-2K1000")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When osnoise hist does not observe any samples above the threshold,
no entries are recorded and the final report shows empty entries
for the usual statistics (count, min, max, avg):
[~]# osnoise hist -d 5s -T 500
# RTLA osnoise histogram
# Time unit is microseconds (us)
# Duration: 0 00:00:05
Index
over:
count:
min:
avg:
max:
That could lead users to confusing interpretations of the results.
A simple solution is to report 0 for count and the statistics, making it
clear that no noise (above the defined threshold) was observed:
[~]# osnoise hist -d 5s -T 500
# RTLA osnoise histogram
# Time unit is microseconds (us)
# Duration: 0 00:00:05
Index
over: 0
count: 0
min: 0
avg: 0
max: 0
Link: https://lkml.kernel.org/r/Zml6JmH5cbS7-HfZ@uudg.org
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Reviewed-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
osnoise top performs background/font color formatting that could make
the text output confusing if not on a terminal. Use the changes from
commit f5c0cdad66 ("rtla/timerlat: Use pretty formatting only on
interactive tty") as an inspiration to fix this problem.
Apply the formatting only if running on a tty, and not in quiet mode.
Link: https://lkml.kernel.org/r/Zmb-yP_3EDHliI8Z@uudg.org
Suggested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Reviewed-by: John Kacur <jkacur@redhat.com>
Reviewed-by: Clark Williams <williams@redhat.com>
Signed-off-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
This is almost compatible, but passing a negative offset should result
in a EINVAL error, but on mips o32 compat mode would seek to a large
32-bit byte offset.
Use compat_sys_lseek() to correctly sign-extend the argument.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Target register of mftc0 should be __res instead of $1, this is
a leftover from old .insn code.
Fixes: dd6d29a614 ("MIPS: Implement microMIPS MT ASE helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add initial support for the Wave515 multi-decoder IP. For now it is only
able to decode HEVC Main/Main10 profile videos into YUV420.
This was tested on FPGA prototype, so wave5_dt_ids[] was not expanded.
Users of the real hardware with Wave515 IP will have to
* provide firmware specific to their SoC
* add struct wave5_match_data like this:
static const struct wave5_match_data platform_name_wave515_data = {
.flags = WAVE5_IS_DEC,
.fw_name = "cnm/wave515_platform_name_fw.bin",
.sram_size = (71 * 1024),
};
* add item to wave5_dt_ids[] like this:
{
.compatible = "vendor,soc-wave515",
.data = &platform_name_wave515_data,
},
* describe new compatible in
Documentation/devicetree/bindings/media/cnm,wave521c.yaml
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Move the excessive "sram-size" device-tree property to the device match
data. Also change the SRAM memory allocation strategy, instead of
allocating exactly sram_size bytes, allocate all available SRAM memory
up to sram_size. Add the placeholders wave5_vpu_dec_validate_sec_axi()
and wave5_vpu_enc_validate_sec_axi() to validate that the allocated SRAM
memory is sufficient to decode/encode bitstream with a given resolution.
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Implement a separate setup routine for interrupts to reduce code
duplication. Also enable interrupts based on vpu_attr->support_encoders
and vpu_attr->support_decoders fields to facilitate support for other
Wave5xx IPs, because not all of them are both encoders and decoders.
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add initial support for optional reset lines. For now, simply deassert
resets while probing the driver and assert them back when removing the
driver.
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add support for decoding HEVC Main10 profile by scaling the FBC
buffer stride and size by a factor of (bitdepth / 8).
Signed-off-by: Ivan Bornyakov <brnkv.i1@gmail.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The m_can driver sets and clears the CCCR.INIT bit during probe (both
when testing the NON-ISO bit, and when configuring the chip). After
clearing the CCCR.INIT bit, the transceiver enters normal mode, where it
affects the CAN bus (i.e. it ACKs frames). This can cause troubles when
the m_can node is only used for monitoring the bus, as one cannot setup
listen-only mode before the device is probed.
Rework the probe flow, so that the CCCR.INIT bit is only cleared when
upping the device. First, the tcan4x5x driver is changed to stay in
standby mode during/after probe. This in turn requires changes when
setting bits in the CCCR register, as its CSR and CSA bits are always
high in standby mode.
Signed-off-by: Martin Hundebøll <martin@geanix.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240607105210.155435-1-martin@geanix.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Martin Jocic <martin.jocic@kvaser.com> says:
This patch series adds support for MSI interrupts. It depends on the
patch series can: kvaser_pciefd: Minor improvements and cleanups.
Link: https://lore.kernel.org/all/20240620181320.235465-1-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Use MSI interrupts with fallback to INTx interrupts.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240620181320.235465-3-martin.jocic@kvaser.com
[mkl: kvaser_pciefd_probe(): call pci_free_irq_vectors() unconditionally]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
A new interrupt is triggered by resetting the DMA RX buffers.
Since MSI interrupts are faster than legacy interrupts, the reset
of the DMA buffers must be moved to the very end of the ISR,
otherwise a new MSI interrupt will be masked by the current one.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240620181320.235465-2-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Replace the variable name err used for return codes with the more
generic name ret. An upcoming patch series for adding MSI interrupts
will introduce code which also returns values other than return codes.
Renaming the variable to ret enables using it for both purposes.
This is applied to the whole file to make it consistent.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-8-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename the variable name board_irq in the ISR to pci_irq to
be more specific and to match the macro by which it is read.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-7-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Make the short function kvaser_pciefd_set_tx_irq inline. This function
is effectively three lines long and therefore inlining it should be
OK according to rule #15 of the Linux kernel coding style.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-5-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This check is already done at the creation of the net devices in
kvaser_pciefd_setup_can_ctrls called from kvaser_pciefd_probe.
If it fails, the driver won't load, so there should be no need to
repeat the check inside the ISR. The number of channels is read
from the FPGA and should be trusted.
Signed-off-by: Martin Jocic <martin.jocic@kvaser.com>
Link: https://lore.kernel.org/all/20240614151524.2718287-3-martin.jocic@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In section 4.5.1.5. Initialization, the step 4 may be skipped and
continue with the Capture Setup sequence, so if the capture has been
setup, there is no need to trigger the initial source change event, just
start decoding, and follow the dynamic resolution change flow if the
configured values do not match those parsed by the decoder.
And it won't fail the gstreamer pipeline.
Fixes: b833b17849 ("media: imx-jpeg: notify source chagne event when the first picture parsed")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If the picture size parsed by decoder is different from those previously
established, it's a normal flow of dynamic resolution change, not an
error case, the log may mislead that some error occurs in decoding, so
remove the error log in this case.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts drivers/media/* from tasklet to BH workqueue.
Based on the work done by Tejun Heo <tj@kernel.org>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
"struct vb2_ops" are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
36607 1156 0 37763 9383 drivers/media/usb/cx231xx/cx231xx-417.o
After:
=====
text data bss dec hex filename
36735 1016 0 37751 9377 drivers/media/usb/cx231xx/cx231xx-417.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
syzkaller reported use-after-free in load_firmware_cb() [1].
The reason is because the module allocated a struct tuner in tuner_probe(),
and then the module initialization failed, the struct tuner was released.
A worker which created during module initialization accesses this struct
tuner later, it caused use-after-free.
The process is as follows:
task-6504 worker_thread
tuner_probe <= alloc dvb_frontend [2]
...
request_firmware_nowait <= create a worker
...
tuner_remove <= free dvb_frontend
...
request_firmware_work_func <= the firmware is ready
load_firmware_cb <= but now the dvb_frontend has been freed
To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is
null, report a warning and just return.
[1]:
==================================================================
BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0
Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504
Call trace:
load_firmware_cb+0x1310/0x17a0
request_firmware_work_func+0x128/0x220
process_one_work+0x770/0x1824
worker_thread+0x488/0xea0
kthread+0x300/0x430
ret_from_fork+0x10/0x20
Allocated by task 6504:
kzalloc
tuner_probe+0xb0/0x1430
i2c_device_probe+0x92c/0xaf0
really_probe+0x678/0xcd0
driver_probe_device+0x280/0x370
__device_attach_driver+0x220/0x330
bus_for_each_drv+0x134/0x1c0
__device_attach+0x1f4/0x410
device_initial_probe+0x20/0x30
bus_probe_device+0x184/0x200
device_add+0x924/0x12c0
device_register+0x24/0x30
i2c_new_device+0x4e0/0xc44
v4l2_i2c_new_subdev_board+0xbc/0x290
v4l2_i2c_new_subdev+0xc8/0x104
em28xx_v4l2_init+0x1dd0/0x3770
Freed by task 6504:
kfree+0x238/0x4e4
tuner_remove+0x144/0x1c0
i2c_device_remove+0xc8/0x290
__device_release_driver+0x314/0x5fc
device_release_driver+0x30/0x44
bus_remove_device+0x244/0x490
device_del+0x350/0x900
device_unregister+0x28/0xd0
i2c_unregister_device+0x174/0x1d0
v4l2_device_unregister+0x224/0x380
em28xx_v4l2_init+0x1d90/0x3770
The buggy address belongs to the object at ffff8000d7ca2000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 776 bytes inside of
2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)
The buggy address belongs to the page:
page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0
flags: 0x7ff800000000100(slab)
raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[2]
Actually, it is allocated for struct tuner, and dvb_frontend is inside.
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The media_disp[12]_pix clock supply LCDIFv3 pixel clock output. These
clocks are usually the only downstream clock from Video PLL on i.MX8MP.
Allow these clocks to reconfigure the Video PLL, as that results in
accurate pixel clock. If the Video PLL is not reconfigured, the pixel
clock accuracy is low.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240531202648.277078-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
- Add 1039.5MHz clock for video PLL to fulfill the LVDS display
148.5MHz * 7 requirement
- Add 800MHz clock for ARM PLL
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-16-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: babfaa9556 ("clk: imx: scu: add more scu clocks")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-15-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: 91e916771d ("clk: imx: scu: remove legacy scu clock binding support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-14-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
The MIPI Pixel and PHY Reference can use the bypass clock as a source. The
MIPI bypass clock is the Pixel clock from the Display controller via the
pixel link. Using the pixel clock for the PHY reference allows the MIPI bit
clock match the pixel rate exactly.
The MIPI pixel clock is currently set to be source from the bypass clock in
the SCFW. This patch allows the pixel clock parent to be set by the kernel
in the event that the SCFW default clock parent may change in the future.
Signed-off-by: Oliver F. Brown <oliver.brown@oss.nxp.com>
Signed-off-by: Robert Chiras <robert.chiras@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-13-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
