Namespace the DSB ID enum properly, and make the naming match
other such enums in general. Also make the names 0 based as
that's what Bspec uses for DSB (unlike eg. planes where it
uses 1 based indexing).
We'll throw out INVALID_DSB while at it since we have no use for
it at the moment.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240531114101.19994-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Christophe JAILLET says:
====================
devlink: Constify struct devlink_dpipe_table_ops
Patch 1 updates devl_dpipe_table_register() and struct
devlink_dpipe_table to accept "const struct devlink_dpipe_table_ops".
Then patch 2 updates the only user of this function.
This is compile tested only.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
'struct devlink_dpipe_table_ops' are not modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
15557 712 0 16269 3f8d drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.o
After:
=====
text data bss dec hex filename
15789 488 0 16277 3f95 drivers/net/ethernet/mellanox/mlxsw/spectrum_dpipe.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"struct devlink_dpipe_table_ops" only contains some function pointers.
Update "struct devlink_dpipe_table" and the 'table_ops' parameter of
devl_dpipe_table_register() so that structures in drivers can be
constified.
Constifying these structures will move some data to a read-only section, so
increase overall security.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dma_heap_allocation_data defines the UAPI as follows:
struct dma_heap_allocation_data {
__u64 len;
__u32 fd;
__u32 fd_flags;
__u64 heap_flags;
};
However, dma_heap_buffer_alloc() casts both fd_flags and heap_flags
into unsigned int. We're inconsistent with types in the non UAPI
arguments. This patch fixes it.
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605012605.5341-1-21cnbao@gmail.com
Aquantia Ethernet PHYs got 3 LED output pins which are typically used
to indicate link status and activity.
Add a minimal LED controller driver supporting the most common uses
with the 'netdev' trigger as well as software-driven forced control of
the LEDs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[ rework indentation, fix checkpatch error and improve some functions ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for LEDs support, move priv and hw stat to header to
reference priv struct also in other .c outside aquantia.main
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
'cable_test_tdr_req_info' is unused since the original
commit f2bc8ad31a ("net: ethtool: Allow PHY cable test TDR data to
configured").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DT compatible string for DH electronics STM32MP13xx DHCOR SoM and
DHSBC carrier board. This stm32mp135f-dhcor-dhsbc board is a stack of
DHCOR SoM based on STM32MP135F SoC (900MHz / crypto capabilities)
populated on DHSBC carrier board.
The SoM contains the following peripherals:
- STPMIC (power delivery)
- 512MB DDR3L memory
- eMMC and SDIO WiFi module
The DHSBC carrier board contains the following peripherals:
- Two RGMII Ethernet ports
- USB-A Host port, USB-C peripheral port, USB-C power supply plug
- Expansion connector
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
'cfpktq' has been unused since
commit 73d6ac633c ("caif: code cleanup").
'caif_packet_funcs' is declared but never defined.
Remove both of them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I was doing some experiments, I found that when using the first
parameter, namely, struct net, in ip_metrics_convert() always triggers NULL
pointer crash. Then I digged into this part, realizing that we can remove
this one due to its uselessness.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch complains:
net/bridge/br_netlink_tunnel.c:
318 br_process_vlan_tunnel_info() warn: inconsistent indenting
Fix it with a proper indenting
Signed-off-by: Chen Hanxiao <chenhx.fnst@fujitsu.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
KSZ8061 needs to write to a MMD register at driver initialization to fix
an errata. This worked in 5.0 kernel but not in newer kernels. The
issue is the main phylib code no longer resets PHY at the very beginning.
Calling phy resuming code later will reset the chip if it is already
powered down at the beginning. This wipes out the MMD register write.
Solution is to implement a phy resume function for KSZ8061 to take care
of this problem.
Fixes: 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This rewrites the Vitesse VSC73xx DSA switches DT binding in
schema.
It was a bit tricky since I needed to come up with some way
of applying the SPI properties only on SPI devices and not
platform devices, but I figured something out that works.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the OSD32MP1 Power System overview[1] pwr_regulators;
vdd-supply and vdd_3v3_usbfs-supply are hard-wired internally in
the SIP module to vdd and ldo4.
[1]:
https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Move static const array into the source file to fix the "defined but not
used" errors.
The fix is perhaps not the prettiest due hand crafting the array sizes
in v3d_performance_counters.h, but I did add some build time asserts to
validate the counts look sensible, so hopefully it is good enough for a
quick fix.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 3cbcbe016c ("drm/v3d: Add Performance Counters descriptions for V3D 4.2 and 7.1")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405211137.hueFkLKG-lkp@intel.com/Cc: Maíra Canal <mcanal@igalia.com>
Cc: Iago Toral Quiroga <itoral@igalia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604160210.24073-1-tursulin@igalia.com
When copying smc settings to clcsock, avoid setting clcsock's sk_sndbuf
to sysctl_tcp_wmem[1], since this may overwrite the value set by
tcp_sndbuf_expand() in TCP connection establishment.
And the other setting sk_{snd|rcv}buf to sysctl value in
smc_adjust_sock_bufsizes() can also be omitted since the initialization
of smc sock and clcsock has set sk_{snd|rcv}buf to smc.sysctl_{w|r}mem
or ipv4_sysctl_tcp_{w|r}mem[1].
Fixes: 30c3c4a449 ("net/smc: Use correct buffer sizes when switching between TCP and SMC")
Link: https://lore.kernel.org/r/5eaf3858-e7fd-4db8-83e8-3d7a3e0e9ae2@linux.alibaba.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>, too.
Signed-off-by: David S. Miller <davem@davemloft.net>
PF mcam entries has to be at low priority always so that VF
can install longest prefix match rules at higher priority.
This was taken care currently but when priority allocation
wrt reference entry is requested then entries are allocated
from mid-zone instead of low priority zone. Fix this and
always allocate entries from low priority zone for PFs.
Fixes: 7df5b4b260 ("octeontx2-af: Allocate low priority entries for PF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
STM32MP15xx RM0436 Rev 6 section 46.3 System timer generator (STGEN) states
"
Arm recommends that the system counter is in an always-on power domain.
This is not supported in the current implementation, therefore STGEN should
be saved and restored before Standby mode entry, and restored at Standby
exit by secure software.
...
"
Instead of piling up workarounds in the firmware which is difficult to
update, add "arm,no-tick-in-suspend" DT property into the timer node to
indicate the timer is stopped in suspend, and let the kernel fix the
timer up.
Fixes: 8471a20253 ("ARM: dts: stm32: add stm32mp157c initial support")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
udf_evict_inode() calls udf_setsize() to truncate deleted inode.
However inode deletion through udf_evict_inode() can happen from inode
reclaim context and udf_setsize() grabs mapping->invalidate_lock which
isn't generally safe to acquire from fs reclaim context since we
allocate pages under mapping->invalidate_lock for example in a page
fault path. This is however not a real deadlock possibility as by the
time udf_evict_inode() is called, nobody can be accessing the inode,
even less work with its page cache. So this is just a lockdep triggering
false positive. Fix the problem by moving mapping->invalidate_lock
locking outsize of udf_setsize() into udf_setattr() as grabbing
mapping->invalidate_lock from udf_evict_inode() is pointless.
Reported-by: syzbot+0333a6f4b88bcd68a62f@syzkaller.appspotmail.com
Fixes: b9a861fd52 ("udf: Protect truncate and file type conversion with invalidate_lock")
Signed-off-by: Jan Kara <jack@suse.cz>
udf_setsize() checks for IS_IMMUTABLE and IS_APPEND flags. This is
however pointless as UDF does not have capability to store these flags
and never allows to set them. Furthermore this is the only place in UDF
code that was actually checking these flags. Remove the pointless check.
Signed-off-by: Jan Kara <jack@suse.cz>
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/isofs/isofs.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240526-md-fs-isofs-v1-1-60e2e36a3d46@quicinc.com>
Fix the 'make W=1' warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/jbd2/jbd2.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240526-md-fs-jbd2-v1-1-7bba6665327d@quicinc.com>
Touchscreen reset needs to be configured
via the pinctrl not the driver (a pull-down resistor
has been soldered onto the reset line which forces
the touchscreen to reset state).
Interrupt line must have a pull-down resistor
in order to freeze the i2c address at 0x5D.
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
On STM32MP135F-DK board the camera support is made of the
CSI based GC2145 sensor, connected to the ST-MIPID02 CSI to parallel
bridge, connected to the DCMIPP parallel input.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The EFI runtime wrappers are a sandbox for calling into EFI runtime
services, which are invoked using indirect calls. When running with kCFI
enabled, the compiler will require the target of any indirect call to be
type annotated.
Given that the EFI runtime services prototypes and calling convention
are governed by the EFI spec, not the Linux kernel, adding such type
annotations for firmware routines is infeasible, and so the compiler
must be informed that prototype validation should be omitted.
Add the __nocfi annotation at the appropriate places in the EFI runtime
wrapper code to achieve this.
Note that this currently only affects 32-bit ARM, given that other
architectures that support both kCFI and EFI use an asm wrapper to call
EFI runtime services, and this hides the indirect call from the
compiler.
Fixes: 1a4fec49ef ("ARM: 9392/2: Support CLANG CFI")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Add power domains on STM32MP25x SoC for supported low power modes:
- CPU_PD0/1: domain for idle of each core Cortex A35 (CStop)
- CLUSTER_PD: D1 domain with Stop1 and LP-Stop1 modes support when
the Cortex A35 cluster and each device assigned to CPU1=CA35
are deactivated
- RET_PD: D1 domain retention (VDDCore is reduced) to support
the LPLV-Stop1 mode
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
In some setups directories can have many (usually negative) dentries.
Hence __fsnotify_update_child_dentry_flags() function can take a
significant amount of time. Since the bulk of this function happens
under inode->i_lock this causes a significant contention on the lock
when we remove the watch from the directory as the
__fsnotify_update_child_dentry_flags() call from fsnotify_recalc_mask()
races with __fsnotify_update_child_dentry_flags() calls from
__fsnotify_parent() happening on children. This can lead upto softlockup
reports reported by users.
Fix the problem by calling fsnotify_update_children_dentry_flags() to
set PARENT_WATCHED flags only when parent starts watching children.
When parent stops watching children, clear false positive PARENT_WATCHED
flags lazily in __fsnotify_parent() for each accessed child.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This reverts commit 2863d665ea.
This patch introduced a potential kernel crash when multiple napi instances
redirect to the same AF_XDP socket. By removing the queue_index check, it is
possible for multiple napi instances to access the Rx ring at the same time,
which will result in a corrupted ring state which can lead to a crash when
flushing the rings in __xsk_flush(). This can happen when the linked list of
sockets to flush gets corrupted by concurrent accesses. A quick and small fix
is not possible, so let us revert this for now.
Reported-by: Yuval El-Hanany <YuvalE@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/xdp-newbies/8100DBDC-0B7C-49DB-9995-6027F6E63147@radware.com
Link: https://lore.kernel.org/bpf/20240604122927.29080-2-magnus.karlsson@gmail.com
We don't need to count nr_initialised in two cases:
* for low zones that are always populated
* after first_deferred_pfn is detected
Let's move the nr_initialised reset down a bit to reduce some comparison
of prev_end_pfn and end_pfn.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240525023040.13509-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Just like what it does in "if (mirrored_kernelcore)", we should use
memblock_region_memory_base_pfn() to get the startpfn.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240525023040.13509-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
The isolated range is [*@start_rgn, *@end_rgn - 1], while the comment says
"the end region inside the range" is *@end_rgn.
Let's correct it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240507075833.6346-4-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
This may trigger the case fixed by commit 48c3b583bb ("mm/memblock:
fix overlapping allocation when doubling reserved array").
This is done by adding the 129th reserve region into memblock.memory. If
memblock_double_array() use this reserve region as new array, it fails.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240507075833.6346-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
The dummy entry is introduced in the initial implementation of lmb in
commit 7c8c6b9776 ("powerpc: Merge lmb.c and make MM initialization
use it.").
As the comment says the empty dummy entry is to simplify the code.
/* Create a dummy zero size LMB which will get coalesced away later.
* This simplifies the lmb_add() code below...
*/
While current code is reimplemented by Tejun in commit 784656f9c6
("memblock: Reimplement memblock_add_region()"). This empty dummy entry
seems not benefit the code any more.
Let's remove it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Paul Mackerras <paulus@ozlabs.org>
CC: Tejun Heo <tj@kernel.org>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240405015821.13411-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Use an STM32 access controller to filter the registration of clocks.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
